RESUMO
Introduction: Concentrated growth factor (CGF) is a new-generation autologous platelet concentrate that promotes tissue regeneration and has anti-inflammatory properties. This randomized multicenter trial aimed to evaluate the effects of CGF on bone healing in combination with root-end microsurgery. Methods: Healthy adult patients indicated for root-end microsurgery were randomly assigned to either the CGF or control (no CGF implantation) groups. CGF was implanted into the bone cavity after root-end filling with mineral trioxide aggregate. Clinical and periapical radiographic evaluations were conducted at 1, 3, 6, and 12 months postoperatively, with follow-up cone-beam computed tomography (CBCT) at 6 months. The lesion volume reduction rate was calculated based on data from the preoperative and follow-up CBCT images. Results: A total of 24 patients were enrolled. The treatment success rate was 91.7% and 83.3% on 12-month periapical radiography and 6-month CBCT, respectively, without a significant difference between the two groups. The lesion volume reduction rate in the CGF group (75.6%) was significantly higher than that in the control (61.0%) group. Conclusions: Autologous CGF in conjunction with root-end microsurgery accelerated lesion reduction as observed on CBCT. Administering autologous blood products to stimulate healing in addition to removing the source of infection appears to be a promising treatment option for root-end microsurgery.
RESUMO
This study aimed to investigate the optimal sodium hypochlorite solution (NaOCl) concentration to effectively remove the root canal biofilm without stimulating periradicular inflammation using coronal laser-activated irrigation (CLAI). To compare the efficacy of different NaOCl concentrations combined with CLAI in removing the biofilm, an in vivo intraradicular biofilm rat model was used. Root canals were irrigated using an Er:YAG laser with either 5% or 0.5% NaOCl. Biofilm removal efficacy of CLAI was compared to that of conventional needle irrigation using scanning electron microscopy (SEM) and quantitative polymerase chain reaction (qPCR). Histological observation of CLAI-associated periradicular inflammation was also conducted. In both the 5% and 0.5% CLAI groups, SEM observation showed the opening of the dentin tubules and biofilm removal. qPCR analysis indicated that the residual bacteria counts after cleaning were significantly lower in the 5% and 0.5% CLAI groups than in the conventional needle irrigation and positive control groups (Tukey test, p < 0.05), and no significant difference was observed between the 5% and 0.5% CLAI groups (p > 0.05). Periapical inflammation in the 5% CLAI group revealed the most severe, including significant neutrophilic and lymphocytic infiltration with abscess formation, while only mild vasodilation was observed in the 0.5% CLAI group. CLAI can remove the biofilm independently of chemical action, which avoids the risks associated with high NaOCl concentrations. Therefore, this root canal irrigation technique ensures safety and effectiveness, promising to contribute to new treatment strategies intended to remove intraradicular biofilm.
Assuntos
Lasers de Estado Sólido , Hipoclorito de Sódio , Animais , Ratos , Hipoclorito de Sódio/farmacologia , Cavidade Pulpar/microbiologia , Irrigantes do Canal Radicular/farmacologia , Enterococcus faecalis , Lasers de Estado Sólido/uso terapêutico , Biofilmes , Inflamação , Irrigação Terapêutica , Preparo de Canal Radicular/métodosRESUMO
BACKGROUND: There is increasing evidence that diagnostic salivary tests measuring inflammatory biomarkers are being developed to assess inflammatory status for early detection, prevention, and progression of periodontal disease. Therefore, the aim of the present study was to investigate and identify the salivary biomarker that can predict the inflammatory status of periodontal disease. METHODS: A total of 36 patients (28 women and 8 men) with an average age of 57 years were investigated. Unstimulated saliva was collected from the recruited subjects and analyzed using SillHa, a saliva-testing device that measures bacteria count, saliva buffer capacity, acidity, leukocyte esterase, protein, and ammonia. Periodontal parameters were then obtained by clinical examination and initial periodontal therapy was performed. Data obtained with SillHa were compared with clinical periodontal parameters at baseline, re-examination (three months from baseline), and final examination (six months from re-examination). RESULTS: Leukocyte esterase activity in saliva measured by SillHa; BOP and PCR measured by clinical examination showed a significant difference between baseline and final examination and between re-examination and final examination. Patients in the lower median group (group 1) had a significant difference in leukocyte esterase activity between baseline and final examination and re-examination and final examination. In addition, patients in Group 1 had significantly lower BOP between baseline and final examination. While patients in the higher median group (group 2) showed a modest decrease in leukocyte esterase activity, which was significant only between baseline and final examination, no significant changes were observed concerning BOP. Furthermore, the associated systemic disease was observed in 30% and 81.2% of group 1 and 2 patients, respectively. CONCLUSION: The results suggest that leukocyte esterase activity in saliva measured by SillHa could serve as a reliable diagnostic marker for monitoring inflammatory status in periodontal disease.
Assuntos
Doenças Periodontais , Masculino , Humanos , Feminino , Pessoa de Meia-Idade , Doenças Periodontais/diagnóstico , Doenças Periodontais/microbiologia , Hidrolases de Éster Carboxílico , Biomarcadores/análise , Saliva/químicaRESUMO
BACKGROUND: Marfan syndrome (MFS) is a systemic disorder of connective tissues caused by insufficient elastic fiber formation that leads to structural weakness and results in various tissue disorders, including cardiovascular and periodontal disease. Notably however, the risk of periodontal disease in MFS patients affected by an aortic aneurysm or dissection has not yet been clarified. METHODS: We investigated the periodontal condition in the following three groups: MFS patients diagnosed with an aortic aneurysm or dissection with a planned aortic surgery (MFS surgery), MFS patients who had already undergone aortic surgery (MFS post-surgery) and healthy control patients (Healthy). The periodontal condition of all of these patients was evaluated at their first visit, reassessed again at two-month after the first visit, and evaluated again at a six-month follow-up after the reassessment. RESULTS: A total of 14 participants, 3 MFS surgery patients, 4 MFS post-surgery patients and 7 healthy control volunteers were examined. Saliva examinations revealed no significant differences between any of the groups at the first visit, reassessment, or follow-up. Interestingly, the MFS surgery cases showed a higher BOP and PISA at the first visit and follow-up compared with the other groups. In contrast, the MFS surgery patients showed an improvement in their LVDd and EF values, both markers of cardiac function, at the reassessment and follow-up compared with the first visit. CONCLUSIONS: MFS associated with an aortic aneurysm or dissection leads to a higher risk of periodontal disease, indicating the need for more frequent oral hygiene maintenance in these patients. In addition, MFS patients who undergo frequent professional cleaning of their teeth show a lower onset of cardiovascular disease, suggesting that professional oral hygiene in these cases contributes to a healthier condition.
Assuntos
Aneurisma Aórtico , Dissecção Aórtica , Síndrome de Marfan , Doenças Periodontais , Dissecção Aórtica/complicações , Dissecção Aórtica/cirurgia , Aneurisma Aórtico/etiologia , Aneurisma Aórtico/cirurgia , Humanos , Síndrome de Marfan/complicações , Doenças Periodontais/complicaçõesRESUMO
We investigated the biofilm removal effects of laser activated irrigation (LAI) using a pig model, focusing on the impact of the fiber tip position, and used a high-speed camera to observe the occurrence and positioning of the cavitation associated with laser irradiation. A total of 16 roots of deciduous mandibular second premolars from 4 pigs were used. After a pulpectomy, the canals were left open for 2 weeks and sealed for 4 weeks to induce intraradicular biofilm. Root canal irrigation was then performed with Er:YAG laser activation. The fiber tip was inserted at two different positions, i.e., into the root canal in the intracanal LAI group and into the pulp chamber in the coronal LAI group. Intracanal needle irrigation with saline or 5% NaOCl was utilized in the positive control and conventional needle irrigation (CNI) groups. SEM and qPCR were carried out to evaluate treatment efficacy. Statistical analysis was performed using ANOVA and a Tukey-Kramer post-hoc test for qPCR and with a Steel-Dwass test to compare the SEM scores, with α = 0.05. A high-speed camera was used to observe the generation of cavitation bubbles and the movement of the induced bubbles after laser irradiation. The intracanal and coronal LAI groups showed significantly lower amounts of bacteria than either the positive control or CNI groups. There was no significant difference found between the intracanal and coronal LAI groups. SEM images revealed opened dentinal tubules with the destruction of biofilm in both LAI groups. High-speed camera images demonstrated cavitation bubble production inside the root canal after a single pulse irradiation pulse. The generated bubbles moved throughout the entire internal multi-rooted tooth space. Coronal LAI can generate cavitation in the root canal with a simply placed fiber inside the pulp chamber, leading to effective biofilm removal. This method could thus contribute to the future development of endodontic treatments for refractory apical periodontitis caused by intraradicular biofilm.
Assuntos
Lasers de Estado Sólido , Dente , Animais , Biofilmes , Lasers de Estado Sólido/uso terapêutico , Irrigantes do Canal Radicular , Preparo de Canal Radicular , Tratamento do Canal Radicular , Hipoclorito de Sódio/farmacologia , SuínosRESUMO
Bone tissue engineering has been developed using a combination of mesenchymal stem cells (MSCs) and calcium phosphate-based scaffolds. However, these complexes cannot regenerate large jawbone defects. To overcome this limitation of MSCs and ceramic scaffolds, a novel bone regeneration technology must be developed using cells possessing high bone forming ability and a scaffold that provides space for vertical bone augmentation. To approach this problem in our study, we developed alveolar bone-derived immature osteoblast-like cells (HAOBs), which have the bone regenerative capacity to correct a large bone defect when used as a grafting material in combination with polylactic acid fibers that organize the 3D structure and increase the strength of the scaffold material (3DPL). HAOB-3DPL constructs could not regenerate bone via xenogeneic transplantation in a micromini pig alveolar bone defect model. However, the autogenic transplantation of mouse calvaria-derived immature osteoblast-like cells (MCOBs) isolated using the identical protocol for HAOBs and mixed with 3DPL scaffolds successfully regenerated the bone in a large jawbone defect mouse model, compared to the 3DPL scaffold alone. Nanoindentation analysis indicated that the regenerated bone had a similar micromechanical strength to native bone. In addition, this MCOB-3DPL regenerated bone possesses osseointegration ability wherein a direct structural connection is established with the titanium implant surface. Hence, a complex formed between a 3DPL scaffold and immature osteoblast-like cells such as MCOBs represents a novel bone tissue engineering approach that enables the formation of vertical bone with the micromechanical properties required to treat large bone defects.
RESUMO
Bone tissue engineering (BTE) is a process of combining live osteoblast progenitors with a biocompatible scaffold to produce a biological substitute that can integrate into host bone tissue and recover its function. Mesenchymal stem cells (MSCs) are the most researched post-natal stem cells because they have self-renewal properties and a multi-differentiation capacity that can give rise to various cell lineages, including osteoblasts. BTE technology utilizes a combination of MSCs and biodegradable scaffold material, which provides a suitable environment for functional bone recovery and has been developed as a therapeutic approach to bone regeneration. Although prior clinical trials of BTE approaches have shown promising results, the regeneration of large bone defects is still an unmet medical need in patients that have suffered a significant loss of bone function. In this present review, we discuss the osteogenic potential of MSCs in bone tissue engineering and propose the use of immature osteoblasts, which can differentiate into osteoblasts upon transplantation, as an alternative cell source for regeneration in large bone defects.
Assuntos
Regeneração Óssea/fisiologia , Engenharia Tecidual , Alicerces Teciduais/química , Animais , Modelos Animais de Doenças , Humanos , Células-Tronco Mesenquimais/citologia , Pesquisa Translacional BiomédicaRESUMO
BACKGROUND: We established an in vivo intraradicular biofilm model of apical periodontitis in pigs in which we compared the efficacy of different irrigant activation techniques for biofilm removal. METHODS: Twenty roots from the deciduous mandibular second premolar of 5 male pigs were used. After pulpectomy, canals were left open for 2 weeks and then sealed for 4 weeks to enable the development of an intracanal biofilm. The intraradicular biofilms was evaluated using SEM and bacterial 16S rRNA gene-sequencing. To investigate the efficacy of biofilm removal, root canal irrigations were performed using conventional needle, passive ultrasonic, subsonic, or laser-activated irrigation. Real-time PCR was conducted to quantitate the remaining biofilm components. Statistical analysis was performed using ANOVA followed by a Tukey kramer post-hoc test with α = 0.05. RESULTS: The pulp exposure model was effective in inducing apical periodontitis and SEM analysis revealed a multi-layer biofilm formation inside the root canal. 16S rRNA sequence analysis identified Firmicutes, Bacteroidetes, and Fusobacteria as the predominant bacterial phyla components, which is similar to the microbiome profile seen in humans. None of the tested irrigation techniques completely eradicated the biofilm components from the root canal, but the subsonic and laser-activated irrigation methods produced the lowest bacterial counts (p < 0.05). CONCLUSIONS: An experimental intraradicular biofilm model has been successfully established in pigs. Within the limitations of the study, subsonic or laser-activated irrigation demonstrated the best biofilm removal results in the pig system.
Assuntos
Cavidade Pulpar , Irrigantes do Canal Radicular , Animais , Biofilmes , Masculino , RNA Ribossômico 16S/genética , Preparo de Canal Radicular , Hipoclorito de Sódio , Suínos , Irrigação TerapêuticaRESUMO
Apical periodontitis (AP) is an acute or chronic inflammatory disease caused by complex interactions between infected root canal and host immune system. It results in the induction of inflammatory mediators such as chemokines and cytokines leading to periapical tissue destruction. To understand the molecular pathogenesis of AP, we have investigated inflammatory-related genes that regulate AP development. We found here that macrophage-derived CXCL9, which acts through CXCR3, is recruited by progressed AP. The inhibition of CXCL9 by a CXCR3 antagonist reduced the lesion size in a mouse AP model with decreasing IL-1ß, IL-6 and TNFα expression. The treatment of peritoneal macrophages with CXCL9 and LPS induced the transmigration and upregulation of osteoclastogenic cytokines such as IL-1ß, IL-6 and matrix metalloprotease 2, a marker of activated macrophages. This suggests that the CXCL9-CXCR3 axis plays a crucial role in the development of AP, mediated by the migration and activation of macrophages for periapical tissue destruction. Our data thus show that CXCL9 regulates the functions of macrophages which contribute to AP pathogenesis, and that blocking CXCL9 suppresses AP progression. Knowledge of the principal factors involved in the progression of AP, and the identification of related inflammatory markers, may help to establish new therapeutic strategies.
Assuntos
Quimiocina CXCL9/metabolismo , Ativação de Macrófagos , Macrófagos/metabolismo , Periodontite Periapical/imunologia , Receptores CXCR3/metabolismo , Animais , Linhagem Celular Tumoral , Ensaios de Migração de Macrófagos , Modelos Animais de Doenças , Interações Hospedeiro-Patógeno/imunologia , Humanos , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Periodontite Periapical/metabolismo , Periodontite Periapical/patologia , Receptores CXCR3/antagonistas & inibidores , Raiz Dentária/patologiaRESUMO
The treatment of vertical bone defects caused by severe periodontal disease requires the regeneration of periodontal tissue. Although various bone substitutes have been clinically applied to vertical bone defect correction, the evaluation of these materials in periodontal tissue remains incomplete. The purpose of this study was to examine the bone regeneration abilities of various bone substitutes including Cytrans, Cerasorb, Neobone and Bio-Oss in a 3-wall bone defect animal model. All of these bone substitutes showed a similar healing ability to periodontal ligament and cementum. However, Cytrans showed the fastest bone healing ability compared with the other materials at 4 weeks post-transplantation. In addition, the recruitment of osteoclasts and endothelial cells was observed in Cytrans grafts at 4 weeks, but only detected at 8 weeks in the other materials. These results suggest that Cytrans promotes faster bone healing by inducing bone remodeling and angiogenesis.
Assuntos
Substitutos Ósseos , Durapatita , Animais , Apatitas , Regeneração Óssea , Fosfatos de Cálcio , Bovinos , Células EndoteliaisRESUMO
The aim of this study was to compare the apical centring ability of incisal-shifted access (ISA) with that of traditional lingual access (TLA). Fifteen three-dimensional printed resin models were prepared from the computed tomography data for a human maxillary central incisor and divided into ISA (n = 7), TLA (n = 7) and control (n = 1) groups. After access preparation, these models were shaped to the working length using K-files up to #40, followed by step-back procedures. An apical portion of the model was removed at 0.5 mm coronal to the working length. Microscopic images of each cutting surface were taken to measure the preparation area and the distance of transportation. TLA created a larger preparation area than ISA (P < 0.05). The distance of transportation (mean ± standard deviation) was 0.4 ± 0.1 mm for ISA and 0.7 ± 0.1 mm for TLA (P < 0.05). Access cavity preparation has a significant effect on apical centring ability. ISA is beneficial to maintaining apical configuration.
Assuntos
Cárie Dentária/terapia , Preparo da Cavidade Dentária/métodos , Cavidade Pulpar/cirurgia , Humanos , Incisivo , Maxila , Modelos DentáriosRESUMO
OBJECTIVE: The aim of this study was to evaluate the oral health attitudes and behavior of students in the oral health curriculum in Australia and New Zealand. MATERIALS AND METHODS: The Hiroshima University - Dental Behavioral Inventory was administered to students in the first (year 1) and final years (year 3) of the oral health curriculum at Charles Sturt University in Australia and the University of Otago in New Zealand. A total of fifty-two year 1 students and forty-five year 3 students completed English version of the questionnaire in 2013. The responses were statistically analyzed by Fisher's exact tests and exact logistic regression models. RESULTS: The responses of students in years 1 and 3 differed significantly for "I worry about the color of my teeth" at Charles Sturt University and at the University Otago, for "I think my teeth are getting worse despite my daily brushing," "I put off going to the dentist until I have a toothache," and "I don't feel I've brushed well unless I brush with strong strokes." The estimated odds ratios from the exact logistic regression models showed that year 1 students were more likely to agree with above-mentioned four questions. CONCLUSIONS: Oral Health students who had been educated in a 3-year oral health curriculum in Australia and New Zealand had more positive attitudes and behaviors related oral health than did students at the beginning of their curriculum.
RESUMO
The purpose of this study was to test nickel titanium (NiTi) instrument performance under different surrounding temperatures. Twenty-four superelastic NiTi instruments with a conical shape comprising a 0.30-mm-diameter tip and 0.06 taper were equally divided into 3 groups according to the temperature employed. Using a specially designed cyclic fatigue testing apparatus, each instrument was deflected to give a curvature 10 mm in radius and a 30° angle. This position was kept as the instrument was immersed in a continuous flow of water under a temperature of 10, 37, or 50 °C for 20 s to calculate the deflecting load (DL). In the same position, the instrument was then allowed to rotate at 300 rpm to fracture, and the working time was converted to the number of cycles to fracture (NCF). The statistical significance was set at p = 0.05. The mean DL (in N) and NCF (in cycles) of the groups at 10, 37, and 50 °C were 10.16 ± 1.36 and 135.50 ± 31.48, 13.50 ± 0.92 and 89.20 ± 16.44, and 14.70 ± 1.21 and 65.50 ± 15.90, respectively. The group at 10 °C had significantly the lowest DL that favorably resulted in the highest NCF. Within the limitations of this study, the surrounding temperature influences the cyclic fatigue resistance and DL of the superelastic NiTi instruments. Lower temperatures are found to favorably decrease the DL and extend the lifetime of the superelastic NiTi instrument. Further NiTi instrument failure studies should be performed under simulated body temperature.
Assuntos
Ligas Dentárias/química , Instrumentos Odontológicos , Níquel/química , Preparo de Canal Radicular/instrumentação , Temperatura , Titânio/química , Elasticidade , Desenho de Equipamento , Análise de Falha de Equipamento , Teste de MateriaisRESUMO
This study aimed to evaluate effects of torsional loading on the mechanical properties of endodontic instruments using the nanoindentation technique. ProFile (PF; size 30, taper 04; Dentsply Maillefer, Switzerland) and stainless steel (SS; size 30, taper 02; Mani, Japan) instruments were subjected to torsional test. Nanoindentation was then performed adjacent to the edge of fracture (edge) and at the cutting part beside the shank (shank). Hardness and elastic modulus were measured under 100-mN force on 100 locations at each region, and compared to those obtained from the same regions on new instruments. It showed that PF and SS instruments failed at 559 ± 67 and 596 ± 73 rotation degrees and mean maximum torque of 0.90 ± 0.07 and 0.99 ± 0.05 N-cm, respectively. Hardness and elastic modulus ranged 4.8-6.7 and 118-339 GPa in SS, and 2.7-3.2 and 52-81 GPa in PF. Significant differences between torsion-fractured and new instruments in hardness and elastic modulus were detected in the SS system used. While in PF system, the edge region after torsional fracture had significantly lower hardness and elastic modulus compared to new instruments. The local hardness and modulus of elasticity of endodontic instruments adjacent to the fracture edge are significantly reduced by torsional loading.
Assuntos
Resinas Compostas , Aço Inoxidável , Estresse Mecânico , Torção Mecânica , Humanos , Fenômenos MecânicosRESUMO
The purpose of this study was to investigate the influence of heat treatment on the mechanical properties of Ni-Ti file materials. Ni-Ti wire (1.00 mm ø) was processed into a conical shape with 0.30-mm diameter tip and 0.06 taper. Specimens were heated for 30 min at 300, 400, 450, 500 or 600°C. Non-heated specimens were used as controls. DSC, a cantilever-bending test and cyclic fatigue test were performed. Ms and Af for groups 400 and 450 were higher than those for others (p<0.05). The load/deflection ratios of groups 400, 450 and 500 were lower than that of group 600 (p<0.05). The bending load values at 2.0-mm deflection of groups 400, 450 and 500 were lower than those of group 300 and the control group (p<0.05). The NCFs of groups 400, 450 and 500 exceeded that of group 600(p<0.05). Changes in flexibility with heat treatment could improve the cyclic fatigue properties of Ni-Ti instruments.
Assuntos
Análise do Estresse Dentário/métodos , Níquel/química , Preparo de Canal Radicular/instrumentação , Titânio/química , Varredura Diferencial de Calorimetria , Elasticidade , Temperatura Alta , Teste de Materiais , MaleabilidadeRESUMO
The dispersion of the lifetime of NiTi instruments, and their deflecting load (DL) changes during cyclic fatigue were investigated. A total of 120 ProFile NiTi rotary instruments were tested using a specially designed cyclic fatigue testing apparatus with three pins. Using these pins, the instrument was bent and rotated at 300 rpm to fracture. DL was recorded using a load cell attached to the central pin. For each sample, the working time was converted to number of cycles to fracture (NCF) and the mean DL (DL(m)) was calculated. The averages of NCF and DL(m) of 120 samples were 584.3±180.5 cycles and 6.44±0.91 N, respectively. All samples showed a sequential decrease in DL during rotation. Based on the present study, it is impossible to estimate the lifetime of a NiTi instrument from NCF. Thus, the change in DL could be an alternative criterion to determine the remaining lifetime.