Safety of romiplostim administered immediately after cord-blood transplantation: a phase 1 trial.

Graft failure and delayed hematopoietic recovery are the major limitations of cord-blood transplantation (CBT). Romiplostim, a thrombopoietin-receptor agonist, promotes megakaryopoiesis and multilineage hematopoiesis in aplastic anemia. The decreased number of hematopoietic stem cells in the early phase after CBT and aplastic anemia share certain characteristics. Therefore, we hypothesized that romiplostim administration immediately after CBT may promote multilineage hematopoietic recovery. We investigated the safety and preliminary efficacy of administering romiplostim a day after CBT. This phase 1 dose-escalation study included six adults with hematologic malignancies in remission. Romiplostim was administered subcutaneously within 7 days after single-unit CBT, initially at doses of 5 µg/kg or 10 µg/kg in three patients, then once a week for 14 weeks or until platelet recovery. The maximum dose was 20 µg/kg. The median number of romiplostim administrations was 6 (range, 3-15). Romiplostim-related adverse events included bone pain (3/6) and injection site reaction (1/6). Non-hematological grade ≥ 3 toxicities were observed in four patients; febrile neutropenia was the most common (4/6). All patients achieved neutrophil engraftment and the median time was 14 days (range, 12-32). Platelet counts ≥ 50 × 109 /L were recorded in all patients except for one who died on day 48; the median time was 34 days (range, 29-98). No relapse, thrombosis, or bone marrow fibrosis was observed during a median follow-up of 34 months. Romiplostim may be safely administered in the early phase of CBT. Further phase 2 trial is warranted for its efficacy evaluation. Trial registration number: UMIN000033799, August 18, 2018.

Combining 3D Magnetic Force Actuator and Multi-Functional Fluorescence Imaging to Study Nucleus Mechanobiology.

A fundamental question in mechanobiology is how living cells sense extracellular mechanical stimuli in the context of cell physiology and pathology. The cellular mechano-sensation of extracellular mechanical stimuli is believed to be through the membrane receptors, the associated protein complex, and the cytoskeleton. Recent advances in mechanobiology demonstrate that the cell nucleus in cytoplasm itself can independently sense mechanical stimuli simultaneously. However, a mechanistic understanding of how the cell nucleus senses, transduces, and responds to mechanical stimuli is lacking, mainly because of the technical challenges in accessing and quantifying the nucleus mechanics by conventional tools. This paper describes the design, fabrication, and implementation of a new magnetic force actuator that applies precise and non-invasive 3D mechanical stimuli to directly deform the cell nucleus. Using CRISPR/Cas9-engineered cells, this study demonstrates that this tool, combined with high-resolution confocal fluorescent imaging, enables the revelation of the real-time dynamics of a mechano-sensitive yes-associated protein (YAP) in single cells as a function of nucleus deformation. This simple method has the potential to bridge the current technology gap in the mechanobiology community and provide answers to the knowledge gap that exists in the relation between nucleus mechanotransduction and cell function.

A comparative study of carbon-platinum hybrid nanostructure architecture for amperometric biosensing.

Carbon and noble metal nanomaterials exhibit unique properties that have been explored over the last few decades for developing electrochemical sensors and biosensors. Hybridization of nanometals to carbon nanomaterials such as graphene or carbon nanotubes produces a synergistic effect on the electrocatalytic activity when compared to either material alone. However, to date there are no comparative studies that directly investigate the effects of nanocarbon concentration and nanocomposite arrangement on electron transport. This comparative study investigated the efficacy of various platinum-carbon hybrid nanostructures for amperometric biosensing. Electroactive surface area, sensitivity towards hydrogen peroxide, response time, limit of detection, and surface roughness were measured for various hybrid nanomaterial arrangements. Both design factors (nanocarbon concentration and network arrangement) influenced the performance of the reduced graphene oxide-based platforms; whereas only nanomaterial arrangement affected the performance of the carbon nanotube-composites. The highest sensitivity towards hydrogen peroxide for reduced graphene oxide nanocomposites (45 ± 3.2 µA mM(-1)) was measured for a graphene concentration of 2 mg mL(-1) in a "sandwich" structure; nanoplatinum layers enveloping the reduced graphene oxide. Likewise, the best carbon nanotube performance toward H2O2 (49 ± 1.4 µA mM(-1)) was measured for a sandwich-type structure with nanoplatinum. The enhanced electrocatalytic activity of this "sandwich" structure was due to a combined effect of electrical junctions formed amongst nanocarbon, and nanocomposite soldering to the electrode surface. The top-down carbon-platinum hybrid nanocomposites in this paper represent a simple, low-cost, approach for formation of high fidelity amperometric sensors with remarkable performance characteristics that are similar to bottom-up fabrication approaches.

Protocol for relative hydrodynamic assessment of tri-leaflet polymer valves.

Limitations of currently available prosthetic valves, xenografts, and homografts have prompted a recent resurgence of developments in the area of tri-leaflet polymer valve prostheses. However, identification of a protocol for initial assessment of polymer valve hydrodynamic functionality is paramount during the early stages of the design process. Traditional in vitro pulse duplicator systems are not configured to accommodate flexible tri-leaflet materials; in addition, assessment of polymer valve functionality needs to be made in a relative context to native and prosthetic heart valves under identical test conditions so that variability in measurements from different instruments can be avoided. Accordingly, we conducted hydrodynamic assessment of i) native (n = 4, mean diameter, D = 20 mm), ii) bi-leaflet mechanical (n= 2, D = 23 mm) and iii) polymer valves (n = 5, D = 22 mm) via the use of a commercially available pulse duplicator system (ViVitro Labs Inc, Victoria, BC) that was modified to accommodate tri-leaflet valve geometries. Tri-leaflet silicone valves developed at the University of Florida comprised the polymer valve group. A mixture in the ratio of 35:65 glycerin to water was used to mimic blood physical properties. Instantaneous flow rate was measured at the interface of the left ventricle and aortic units while pressure was recorded at the ventricular and aortic positions. Bi-leaflet and native valve data from the literature was used to validate flow and pressure readings. The following hydrodynamic metrics were reported: forward flow pressure drop, aortic root mean square forward flow rate, aortic closing, leakage and regurgitant volume, transaortic closing, leakage, and total energy losses. Representative results indicated that hydrodynamic metrics from the three valve groups could be successfully obtained by incorporating a custom-built assembly into a commercially available pulse duplicator system and subsequently, objectively compared to provide insights on functional aspects of polymer valve design.

Characterization of DNA polymerase-associated acyclovir-resistant herpes simplex virus type 1: mutations, sensitivity to antiviral compounds, neurovirulence, and in-vivo sensitivity to treatment.

Acyclovir (ACV)-resistant (ACV(r)) mutants were generated from plaque-purified ACV-sensitive herpes simplex virus type 1 (HSV-1) by culturing the virus in Vero cells in the presence of 2-amino-7-(1,3-dihydroxy-2-propoxymethyl) purine (S2242). Three DNA polymerase (DNApol)-associated ACV(r) HSV-1 generated under ACV selection in a previous study (Suzutani, T., Ishioka, K., De Clercq, E., et al., Antimicrob. Agents Chemother., 47, 1707-1713, 2003) were also included. The sensitivity of the mutants to other antivirals and their neurovirulence were determined. The treatment efficacy of ACV and ganciclovir (GCV) against ACV(r) HSV-1 infections was evaluated in mice. Amino acid substitutions were demonstrated in conserved regions II and III in DNApol in 5 of the 6 mutants, while the other substitution was located in non-conserved regions. DNApol-associated ACV(r) clones showed cross-resistance to foscarnet, penciclovir, and vidarabine but were sensitive or hypersensitive to GCV, brivudin, sorivudine, and spongothymidine. The ACV(r) clone with an N815S mutation in DNApol showed similar neurovirulence to that of the parent virus; however, those with other mutations showed attenuation. GCV was effective in the treatment of the ACV(r) clone with similar virulence to that of parent HSV-1, while ACV was less effective in mice. These results indicate the importance of the characterization of HSV-1 isolates for the proper treatment of HSV-1 infections exhibiting ACV-resistance.

Neonatal herpes encephalitis caused by a virologically confirmed acyclovir-resistant herpes simplex virus 1 strain.

A neonate with herpes simplex virus 1 encephalitis was treated with intravenous acyclovir. During the course of therapy, the infection became intractable to the treatment and a mutation in the viral thymidine kinase gene (nucleotide G375T, amino acid Q125H) developed. This mutation was demonstrated in vitro to confer acyclovir resistance.

Determination of nicotianamine in soy sauce and other plant-based foods by LC-MS/MS.

Nicotianamine is a nonproteinogenic amino acid, known to be an important metal chelator in plants. Recently, the antihypertensive effect of nicotianamine was discovered. In this study, a simple method to determine nicotianamine was developed using liquid chromatography-tandem mass spectrometry (LC-MS/MS) with a multimode ODS column. This method does not need derivatizing or ion-pairing reagents to retain nicotianamine, which is known for its poor retention on reversed-phase columns because of its high polarity. Moreover, this method showed a sufficient limit of detection (0.5 ng/mL), so it was found to be suitable for the analysis of nicotianamine in soy sauce and other foods, without cleanup. To subtract the matrix effect during LC-MS/MS analysis, a standard addition method was used. The levels of nicotianamine in soy sauce ranged from <0.25 to 71 µg/g. Nicotianamine was also determined in other foods, including soy milk, vegetable juice, fruit juice, and bottled tea.

Syntheses of structurally-simplified and fluorescently-labeled neovibsanin derivatives and analysis of their neurite outgrowth activity in PC12 cells.

The syntheses of several neovibsanin derivatives were carried out in order to elucidate the simple structure required for displaying neurite outgrowth activity. In addition, a fluorescent probe molecule was synthesized and the analysis of its behavior in the PC12 cell line showed that the neovibsanins accumulate on the outer edge of the cell at the site of formation of prominences.

Effect of temperature on the stability of various peptidases during peptide-enriched soy sauce fermentation.

We previously developed a peptide-enriched soy sauce-like seasoning called Fermented Soybean Seasoning (FSS) with high-temperature fermentation, and we have reported the antihypertensive effects of FSS. Seryl-tyrosine (Ser-Tyr) and glycyl-tyrosine (Gly-Tyr) were identified from FSS as active constituents in the antihypertensive effects. They were found to be particularly enriched in FSS; more so than in regular soy sauce. In the present study, we clarified one of the mechanisms underlying the accumulation of these bioactive peptides during high temperature soy sauce brewing. Crude enzyme extracts were prepared from model soy sauce mash (moromi) fermented at various temperatures. Leucine aminopeptidase-I, II, and seryl-tyrosine hydrolytic activity were found to decrease in the moromi incubated at the fermentation temperature of FSS whereas almost no decrease was observed in that of regular soy sauce. The concentrations of ACE inhibitory peptides, Ser-Tyr and Gly-Tyr, in the moromi incubated at high temperature were revealed to be higher than those at low temperature through quantitative LC-MS/MS analysis. These results suggested that the peptidases responsible for degrading low molecular weight bioactive peptides were inactivated during the high temperature fermentation, thus, these peptides would be likely to remain in the high temperature fermentation.

Determination of 4(5)-methylimidazole in soy sauce and other foods by LC-MS/MS after solid-phase extraction.

A method for the determination of 4(5)-methylimidazole (4MeI) in naturally brewed soy sauce was developed for the first time using solid-phase extraction (SPE) and liquid chromatography-tandem mass spectrometry (LC-MS/MS). SPE on silica-based reversed-phase cartridges with heptafluorobutyric acid as an ion-pairing reagent was used for the efficient cleanup of 4MeI. A multimode ODS column was employed for the chromatographic separation. To subtract the matrix effect during LC-MS/MS analysis, a standard addition method was used. The levels of 4MeI found in naturally brewed soy sauce were extremely low (ranging from <0.002 to 0.023 µg/g), whereas those in soy sauces containing caramel color were generally high (ranging from 0.43 to 4.8 µg/g). The method proved to be useful for the analysis of 4MeI in other foods such as caramel colors, drinks, and Worcestershire sauce.

Antihypertensive mechanism of a peptide-enriched soy sauce-like seasoning: the active constituents and its suppressive effect on renin-angiotensin-aldosterone system.

We previously reported that a peptide-enriched soy sauce-like seasoning called fermented soybean seasoning (FSS) demonstrated antihypertensive effects both in spontaneously hypertensive rats (SHR) and Dahl salt-sensitive rats. Angiotensin I-converting enzyme (ACE) inhibitory substances (9 kinds of dipeptides and a nicotianamine) were identified from FSS. In the present study, we clarified the mechanisms underlying the antihypertensive effects of FSS in SHR. FSS was divided into the nicotianamine fraction and the peptide fraction. The peptide fraction was found to exert a more prevalent antihypertensive effect than the nicotianamine fraction in SHR. Among the peptides, we identified Gly-Tyr and Ser-Tyr as the 2 primary substances in FSS that contributed to the antihypertensive effect in SHR. These peptides were neither degraded by acid nor gastrointestinal proteases, and were absorbed into the circulating blood. FSS (2000 mg/kg) exerted ACE inhibitory activity in the lung of rats and provided a decrease (P= 0.0067) in the level of serum aldosterone after a single oral administration in SHR, resulting in the antihypertensive effect. The antihypertensive mechanism was found to be similar to therapeutic ACE inhibitors and other food-derived ACE inhibitory peptides, which are in wide use and are recognized as safe.

Development of an alternating magnetic-field-assisted finishing process for microelectromechanical systems micropore x-ray optics.

X-ray astronomy research is often limited by the size, weight, complexity, and cost of functioning x-ray optics. Micropore optics promises an economical alternative to traditional (e.g., glass or foil) x-ray optics; however, many manufacturing difficulties prevent micropore optics from being a viable solution. Ezoe et al. introduced microelectromechanical systems (MEMS) micropore optics having curvilinear micropores in 2008. Made by either deep reactive ion etching or x-ray lithography, electroforming, and molding (LIGA), MEMS micropore optics suffer from high micropore sidewall roughness (10-30nmrms) which, by current standards, cannot be improved. In this research, a new alternating magnetic-field-assisted finishing process was developed using a mixture of ferrofluid and microscale abrasive slurry. A machine was built, and a set of working process parameters including alternating frequency, abrasive size, and polishing time was selected. A polishing experiment on a LIGA-fabricated MEMS micropore optic was performed, and a change in micropore sidewall roughness of 9.3+/-2.5nmrms to 5.7+/-0.7nmrms was measured. An improvement in x-ray reflectance was also seen. This research shows the feasibility and confirms the effects of this new polishing process on MEMS micropore optics.

Antihypertensive effect of peptide-enriched soy sauce-like seasoning and identification of its angiotensin I-converting enzyme inhibitory substances.

We have developed a peptide-enriched soy sauce-like seasoning termed Fermented Soybean Seasoning (FSS), by modifying the process of soy sauce brewing. The FSS has a 2.7-fold higher concentration of total peptides than regular soy sauce. The angiotensin I-converting enzyme (ACE) inhibitory activity of FSS (IC(50) = 454 microg/mL) was greater than that of regular soy sauce (IC(50) = 1620 microg/mL). The FSS demonstrated antihypertensive effects both in spontaneously hypertensive rats and in Dahl salt-sensitive rats during continuous feeding. The ACE inhibitory substances were purified from FSS by reversed-phase chromatography. Ala-Trp IC(50) = 10 microM; Gly-Trp IC(50) = 30 microM; Ala-Tyr IC(50) = 48 microM; Ser-Tyr, IC(50) = (67 microM; Gly-Tyr, IC(50) = 97 microM; Ala-Phe, IC(50) = 190 microM; Val-Pro, IC(50) = (480 microM; Ala-Ile, IC(50) = 690 microM; Val-Gly, IC(50) = 1100 microM; and a nicotianamine, IC(50) = 0.26 microM. [corrected] The concentrations of these substances in the FSS were revealed to be higher than that of regular soy sauce through quantitative LC-MS/MS analysis.

An initial step of GAS-containing autophagosome-like vacuoles formation requires Rab7.

Group A streptococcus (GAS; Streptococcus pyogenes) is a common pathogen that invades non-phagocytic human cells via endocytosis. Once taken up by cells, it escapes from the endocytic pathway to the cytoplasm, but here it is contained within a membrane-bound structure termed GAS-containing autophagosome-like vacuoles (GcAVs). The autophagosome marker GFP-LC3 associates with GcAVs, and other components of the autophagosomal pathway are involved in GcAV formation. However, the mechanistic relationship between GcAV and canonical autophagy is largely unknown. Here, we morphologically analyzed GcAV formation in detail. Initially, a small, GFP-LC3-positive GcAV sequesters each streptococcal chain, and these then coalesce into a single, large GcAV. Expression of a dominant-negative form of Rab7 or RNAi-mediated knockdown of Rab7 prevented the initial formation of small GcAV structures. Our results demonstrate that mechanisms of GcAV formation includes not only the common machinery of autophagy, but also Rab7 as an additional component, which is dispensable in canonical autophagosome formation.

Stereoselective reduction of carbonyl compounds with Actinomycete: purification and characterization of three alpha-keto ester reductases from Streptomyces avermitilis.

We achieved the purification of three alpha-keto ester reductases (Streptomyces avermitilis keto ester reductase, SAKERs-I, -II, and -III) from Streptomyces avermitilis NBRC14893 whole cells. The molecular masses of the native SAKERs-I, -II, and -III were estimated to be 72, 38, and 36 kDa, respectively, by gel filtration chromatography. The subunit molecular masses of SAKERs-I, -II, and -III were also estimated to be 32, 32, and 34 kDa, respectively, by SDS-polyacrylamide gel electrophoresis. The purified SAKERs-II and -III showed a reducing activity for alpha-keto esters (in particular, for ethyl pyruvate). SAKER-I showed a high reducing activity not only toward the alpha- and beta-keto esters, but also toward alpha-keto acid. The N-terminal region amino acid sequences of SAKERs-I, -II, and -III were identical to that of a putative oxidoreductase, SAV2750, a putative oxidoreductase, SAV1849, and a putative oxidoreductase, SAV4117, respectively, hypothetical proteins coded on the S. avermitilis genome.

Immunomodulatory effect of halophilic lactic acid bacterium Tetragenococcus halophilus Th221 from soy sauce moromi grown in high-salt medium.

A halophilic lactic acid bacterium, Tetragenococcus halophilus, was found to possess an immunomodulatory activity that promotes T helper type 1 (Th1) immunity in addition to its important roles in soy sauce brewing. Strain Th221 was selected from 151 strains isolated from soy sauce (shoyu) moromi, since it induced strong interleukin (IL)-12 production by mouse peritoneal macrophages in vitro. The relationship between the salt concentration in the medium and the IL-12 production-inducing activity of this strain was investigated, and the activity was found to be strong when the bacteria were grown in medium containing > or =10% (w/v) salt. The Th1-promoting activity was also manifested in an in vivo mouse study, since Th1-dependant contact sensitivity was augmented and Th2 immunity, as evaluated by specific immunoglobulin E production, was suppressed following oral ingestion of Th221. Based on these findings, Th221 administration may be useful for improving allergic symptoms.

Crystal structures of BchU, a methyltransferase involved in bacteriochlorophyll c biosynthesis, and its complex with S-adenosylhomocysteine: implications for reaction mechanism.

BchU plays a role in bacteriochlorophyll c biosynthesis by catalyzing methylation at the C-20 position of cyclic tetrapyrrole chlorin using S-adenosylmethionine (SAM) as a methyl source. This methylation causes red-shifts of the electronic absorption spectrum of the light-harvesting pigment, allowing green photosynthetic bacteria to adapt to low-light environments. We have determined the crystal structures of BchU and its complex with S-adenosylhomocysteine (SAH). BchU forms a dimer and each subunit consists of two domains, an N-terminal domain and a C-terminal domain. Dimerization occurs through interactions between the N-terminal domains and the residues responsible for the catalytic reaction are in the C-terminal domain. The binding site of SAH is located in a large cavity between the two domains, where SAH is specifically recognized by many hydrogen bonds and a salt-bridge. The electron density map of BchU in complex with an analog of bacteriochlorophyll c located its central metal near the SAH-binding site, but the tetrapyrrole ring was invisible, suggesting that binding of the ring to BchU is loose and/or occupancy of the ring is low. It is likely that His290 acts as a ligand for the central metal of the substrate. The orientation of the substrate was predicted by simulation, and allows us to propose a mechanism for the BchU directed methylation: the strictly conserved Tyr246 residue acts catalytically in the direct transfer of the methyl group from SAM to the substrate through an S(N)2-like mechanism.

Changes in spatial and temporal localization of Dictyostelium homologues of TRAP1 and GRP94 revealed by immunoelectron microscopy.

TRAP1 (tumor necrosis factor receptor-associated protein 1) is a member of the molecular chaperone HSP90 (90-kDa heat shock protein) family. In this study, we mainly examined the behavior of Dictyostelium TRAP1 homologue, Dd-TRAP1, during Dictyostelium development by immunoelectron microscopy. In vegetatively growing D. discoideum Ax-2 cells, Dd-TRAP1 locates in nucleolus and vesicles in addition to the cell cortex including cell membrane. Many of Dd-TRAP1 molecules moved to the mitochondrial matrix in response to differentiation, although Dd-TRAP1 on the cell membrane seems to be retained. Some Dd-TRAP1 was also found to be secreted to locate outside the cell membrane in Ax-2 cells starved for 6 h. At the multicellular slug stage, Dd-TRAP1 was primarily located in mitochondria and cell membrane in both prestalk and prespore cells. More importantly, in differentiating prespore cells, a significant number of Dd-TRAP1 locates in the PSV (prespore-specific vacuole) that is a sole cell type-specific organelle and essential for spore wall formation, whereas some Dd-TRAP1 in the cell cortical region of prestalk cells. These findings strongly suggest the importance of Dd-TRAP1 regulated temporally and spatially during Dictyostelium development. Incidentally, we also have certified that the glucose-regulated protein 94 (Dd-GRP94) is predominantly located in Golgi vesicles and cisternae, followed by its colocalization with Dd-TRAP1 in the PSV.

Crystallization and preliminary X-ray diffraction study of BchU, a methyltransferase from Chlorobium tepidum involved in bacteriochlorophyll c biosynthesis.

The S-adenosylmethionine-dependent methyltransferase BchU is an enzyme involved in the bacteriochlorophyll c biosynthetic pathway and catalyzes methylation at the C-20 position of the chlorin moiety. Recombinant Chlorobium tepidum BchU overproduced in Escherichia coli was purified and crystallized by the hanging-drop vapour-diffusion method using ammonium sulfate as a precipitant. The crystals belonged to the hexagonal space group P6(1)22 or P6(5)22, with unit-cell parameters a = b = 81.5, c = 250.7 A. A native data set was collected to 2.27 A resolution using synchrotron radiation at SPring-8.