Observation of edge states derived from topological helix chains.

Introducing the concept of topology has revolutionized materials classification, leading to the discovery of topological insulators and Dirac-Weyl semimetals1-3. One of the most fundamental theories underpinning topological materials is the Su-Schrieffer-Heeger (SSH) model4,5, which was developed in 1979-decades before the recognition of topological insulators-to describe conducting polymers. Distinct from the vast majority of known topological insulators with two and three dimensions1-3, the SSH model predicts a one-dimensional analogue of topological insulators, which hosts topological bound states at the endpoints of a chain4-8. To establish this unique and pivotal state, it is crucial to identify the low-energy excitations stemming from bound states, but this has remained unknown in solids because of the absence of suitable platforms. Here we report unusual electronic states that support the emergent bound states in elemental tellurium, the single helix of which was recently proposed to realize an extended version of the SSH chain9,10. Using spin- and angle-resolved photoemission spectroscopy with a micro-focused beam, we have shown spin-polarized in-gap states confined to the edges of the (0001) surface. Our density functional theory calculations indicate that these states are attributed to the interacting bound states originating from the one-dimensional array of SSH tellurium chains. Helices in solids offer a promising experimental platform for investigating exotic properties associated with the SSH chain and exploring topological phases through dimensionality control.

Antiferromagnetic topological insulator with selectively gapped Dirac cones.

Antiferromagnetic (AF) topological materials offer a fertile ground to explore a variety of quantum phenomena such as axion magnetoelectric dynamics and chiral Majorana fermions. To realize such intriguing states, it is essential to establish a direct link between electronic states and topology in the AF phase, whereas this has been challenging because of the lack of a suitable materials platform. Here we report the experimental realization of the AF topological-insulator phase in NdBi. By using micro-focused angle-resolved photoemission spectroscopy, we discovered contrasting surface electronic states for two types of AF domains; the surface having the out-of-plane component in the AF-ordering vector displays Dirac-cone states with a gigantic energy gap, whereas the surface parallel to the AF-ordering vector hosts gapless Dirac states despite the time-reversal-symmetry breaking. The present results establish an essential role of combined symmetry to protect massless Dirac fermions under the presence of AF order and widen opportunities to realize exotic phenomena utilizing AF topological materials.

Enxerto pediculado de omento maior como adjuvante no tratamento de osteomielite de tíbia em cão - relato de caso / [Greater omentum pedicle flap as adjunctive treatment of tibial osteomyelitis in a dog - case report]

A osteomielite é um desafio terapêutico em ortopedia, capaz de retardar ou mesmo impedir a consolidação óssea. O omento, há anos, tem sido empregado como alternativa em diferentes procedimentos cirúrgicos, por sua capacidade, entre outras, de angiogênese, sendo aplicado na ortopedia veterinária quando há o risco de não união óssea. Neste caso, um cão Fila Brasileiro foi submetido à realização de enxerto com retalho pediculado de omento maior, após osteomielite resistente presente em osteossíntese de fratura múltipla de tíbia aberta grau II. Durante 16 dias, manteve-se a comunicação do retalho, mas, diante do risco de peritonite, o pedículo foi seccionado. Numa sequência de intervenções cirúrgicas, após 89 dias, houve cicatrização óssea e remissão da osteomielite, mesmo na presença de bactérias multirresistentes. Neste relato, o omento foi efetivo como terapia adjuvante no tratamento da osteomielite e garantiu o retorno da função do membro.(AU)

Osteomyelitis is a therapeutic challenge in orthopedics, capable of delaying or even preventing bone healing. The omentum has been used in different surgical procedures as an alternative for its capacity, among others, of angiogenesis, being applied in veterinary orthopedics, when there is a risk of non-union of bone. In this case, a Brazilian row dog was submitted to grafting with pedicle flap of greater omentum, after resistant osteomyelitis present in open fracture osteosynthesis of open tibia grade II. For 16 days the communication of the flap was maintained, but at the risk of peritonitis, the pedicle was sectioned. In a sequence of surgical interventions, after 89 days, there was bone healing and remission of osteomyelitis, even in the presence of multi-resistant bacteria. In this report, the omentum was effective as adjuvant therapy in the treatment of osteomyelitis and guaranteed the return of limb function.(AU)

Placa bloqueada em fratura tibiotársica de coruja suindara (Tyto furcata): relato de caso / Locking plate in tibiotarsal fracture in a suindara owl: case report

Foi atendida, no Hospital Veterinário da Universidade de Cuiabá, uma coruja suindara (Tyto furcata), resgatada pela Polícia Militar Ambiental, sem histórico, adulta e 400 gramas de peso corporal. A ave apresentava impotência funcional do membro pélvico direito, além de desvio, crepitação e dor na região proximal tibiotársica direita, sem lesão cutânea. Estudo radiográfico revelou fratura diafisária oblíqua curta em tibiotarso direito. A estabilização da fratura foi realizada com placa bloqueada do sistema de 1,5mm, na função de apoio, seis orifícios, com três parafusos monocorticais distais, dois parafusos monocorticais proximais e um parafuso bicortical proximal. Ao 30º dia do pós-operatório, os achados radiográficos de consolidação óssea e o retorno da função do membro permitiram a alta médica. Concluiu-se que o uso de placa bloqueada em função apoio para estabilização de fraturas tibiotársicas simples de coruja suindara oferece resultados satisfatórios.(AU)

An adult suindara owl (Tyto furcata), with no specific history and 400 grams of body weight was treated at the Veterinary Hospital of the University of Cuiabá. The patient presented functional impotence in the right pelvic limb, deviation, crepitation and pain in the proximal region in right tibiotarsal, without cutaneous lesions. Radiographs revealed a short oblique diaphyseal fracture at the right tibiotarsus. Fracture stabilization was performed with a 1.5mm locking plate, buttress, six holes; three distal monocortical screws, two proximal monocortical screws and a proximal bicortical screw. On the 30th postoperative day, radiographic revealed bone healing, and the return of limb function allowed medical discharge. It was concluded that the use of locking plates in buttress function to stabilize simple tibiotarsus fractures in suindara owl offers satisfactory results.(AU)

Conversion of a conventional superconductor into a topological superconductor by topological proximity effect.

Realization of topological superconductors (TSCs) hosting Majorana fermions is a central challenge in condensed-matter physics. One approach is to use the superconducting proximity effect (SPE) in heterostructures, where a topological insulator contacted with a superconductor hosts an effective p-wave pairing by the penetration of Cooper pairs across the interface. However, this approach suffers a difficulty in accessing the topological interface buried deep beneath the surface. Here, we propose an alternative approach to realize topological superconductivity without SPE. In a Pb(111) thin film grown on TlBiSe2, we discover that the Dirac-cone state of substrate TlBiSe2 migrates to the top surface of Pb film and obtains an energy gap below the superconducting transition temperature of Pb. This suggests that a Bardeen-Cooper-Schrieffer superconductor is converted into a TSC by the topological proximity effect. Our discovery opens a route to manipulate topological superconducting properties of materials.

Relationship between temporomandibular joint pain and magnetic resonance imaging findings in patients with temporomandibular joint disorders.

The purpose of this study was to evaluate abnormal magnetic resonance imaging (MRI) findings related to temporomandibular joint (TMJ) pain. This study included 245 joints of 152 patients with temporomandibular disorders with anterior disc displacement; of these, 129 joints had joint pain whereas 116 joints had no joint pain. MRI was used to evaluate the reduction of anterior disc displacement, joint effusion, mandible condylar morphology, bone marrow oedema of the mandibular condyle, and signal intensity of the posterior disc attachment (PDA) on fat-suppressed T2-weighted images. The odds ratio (OR) for each MRI variable for the pain group versus the no pain group was computed using logistic regression analysis. Univariate logistic regression analysis showed significant correlations between TMJ pain and all MRI findings. Multivariate logistic regression analysis showed significant correlations with joint effusion (P=0.03, OR 2.21), bone marrow oedema (P<0.001, OR 11.75), and signal intensity of the PDA (P<0.001, OR 6.21). These results suggest that bone marrow oedema, high signal intensity of the PDA on fat-suppressed T2-weighted images, and joint effusion, in descending order of influence, are factors related to TMJ pain.

Enhancement of paraben-fungicidal activity by sulforaphane, a cruciferous vegetable-derived isothiocyanate, via membrane structural damage in Saccharomyces cerevisiae.

Parabens have been widely used as antimicrobial preservatives in cosmetics, pharmaceuticals, foods and beverages. Commonly, methyl-, ethyl-, propyl- and butylparaben are used independently or in combination to maintain the quality of industrial products, and they are considered to have low toxicity. However, recent evidence has suggested that parabens are toxic in mammalian cells, and parabens have been associated with allergic-contact dermatitis, breast cancer and changes in testosterone levels. Sulforaphane, a cruciferous vegetable-derived isothiocyanate, was effective in decreasing the growth inhibitory concentrations of ethyl-, propyl-, butyl- and methylparaben in the yeast Saccharomyces cerevisiae. The sulforaphane-enhanced fungicidal effects of methylparaben were deemed to be caused by drastic cell membrane damage and the leakage of internal substances, such as nucleotides, from S. cerevisiae cells. Moreover sulforaphane markedly decreased the minimum concentration of methyl- and ethylparaben required to inhibit the growth of various microbes, such as the pathogenic yeast that causes severe mycosis, Candida albicans; the filamentous fungi Aspergillus niger; and the Gram-negative bacterium Escherichia coli. Enhanced antimicrobial activity from the beneficial components of edible plants may increase paraben efficacy at low concentrations and minimize preservative-induced side effects in consumers. SIGNIFICANCE AND IMPACT OF THE STUDY: Sulforaphane, a natural and beneficial cruciferous vegetable-derived isothiocyanate, increased the ability of parabens to disrupt fungal cell membranes. Paraben-containing products have been reported to cause allergic contact dermatitis and drug hypersensitivity; therefore, methods to preserve organic products that may reduce the concentrations of parabens are both timely and necessary. In this study, we found that the combined antimicrobial effects of sulforaphane and parabens had the potential to reduce the paraben concentration needed to preserve organic products, thereby indicating that paraben toxicity may be reduced without affecting its activity as a preservative.

Relationship Between Stress Coping Mechanisms and Depression in Kidney Transplant Recipients.

BACKGROUND: It has been reported that transplant recipients are exposed to physical and psychosocial stresses even after transplant surgery and exhibit psychological disorders such as depression. PURPOSE: In this study, we extracted trends concerning how recipients of kidney transplants cope with stress, and we also examined how they cope with depression and its countermeasures. METHOD: We administered questionnaire surveys to 109 kidney transplant recipients. These included items on personal attributes, medical information, depression, and stress-coping type scales. Statistical analysis was performed using factor analysis and multiple regression analysis. RESULTS: Fifteen out of 109 (13.8%) were found to be high-risk patients for depression based on responses to the questionnaire using the depression scale. We extracted 2 factors of stress-coping type, namely Factor 1, "Directly coping with the problem," of patients who try to directly resolve the problem in a positive manner and Factor 2, "Stress-release while avoiding the problem," for those who relieve their feelings in response to the stress without resolving the problem itself. When multiple regression analysis was conducted with the depression scale as the dependent variable and the stress-coping factor as the independent variable, Factor 1 tended to be associated with reduced depression and Factor 2 with increased depression. CONCLUSIONS: Results showed that to improve the mental health of those who receive kidney transplants, it is necessary to examine the depression and stress-coping types of such patients at an early stage and carry out education on stress-coping, focusing on resolving the actual problem.

Nanofocusing of X-ray free-electron laser using wavefront-corrected multilayer focusing mirrors.

A method of fabricating multilayer focusing mirrors that can focus X-rays down to 10 nm or less was established in this study. The wavefront aberration induced by multilayer Kirkpatrick-Baez mirror optics was measured using a single grating interferometer at a photon energy of 9.1 keV at SPring-8 Angstrom Compact Free Electron Laser (SACLA), and the mirror shape was then directly corrected by employing a differential deposition method. The accuracies of these processes were carefully investigated, considering the accuracy required for diffraction-limited focusing. The wavefront produced by the corrected multilayer focusing mirrors was characterized again in the same manner, revealing that the root mean square of the wavefront aberration was improved from 2.7 (3.3) rad to 0.52 (0.82) rad in the vertical (horizontal) direction. A wave-optical simulator indicated that these wavefront-corrected multilayer focusing mirrors are capable of achieving sub-10-nm X-ray focusing.

Effects of paraprobiotic Lactobacillus paracasei MCC1849 supplementation on symptoms of the common cold and mood states in healthy adults.

We investigated the effects of paraprobiotic Lactobacillus paracasei MCC1849 (LAC-Shield™) on symptoms of the common cold and mood states in healthy young adults. A total of 241 participants were randomised to receive 1×1010 heat-killed L. paracasei MCC1849 cell powder (10LP), 3×1010 heat-killed L. paracasei MCC1849 cell powder (30LP), or placebo powder without any L. paracasei cells once daily for 12 weeks based on the incidence of the common cold in the previous year, so that the risk of the incidence was equal among the groups. The incidence and severity of common cold symptoms were rated daily in a subject diary. Salivary secretory immunoglobulin A concentrations and saliva flow rates were analysed at 0 and 6 weeks. The Profile of Mood States (POMS) was assessed using POMS 2 0, 6, and 12 weeks after the intervention. No significant differences were observed in the incidence of the common cold among the groups. In a prespecified subgroup of subjects who had the common cold in the previous year, the incidence, total number of days of symptoms, and symptom scores of the common cold significantly improved in the 10LP-intake group, and were slightly lower in the 30LP-intake group than in the placebo group. The level of deterioration in the positive mood state caused by stress was less in the MCC1849-intake group than in the placebo group. These results indicate that L. paracasei MCC1849 has the potential to improve resistance to common cold infections in susceptible subjects and maintain a desirable mood state, even under mental stress conditions. Further randomised controlled trials are needed in order to investigate the possible beneficial effects of paraprobiotic L. paracasei MCC1849 on the common cold in susceptible populations.

Relationship between arthroscopic findings of synovitis and levels of tumour necrosis factor-alpha and matrix metalloproteinases in synovial lavage fluid from patients with unilateral high mandibular condyle fractures.

Arthrocentesis has an effect of washing out inflammatory products that accumulate in the joint compartment of a dysfunctional temporomandibular joint (TMJ). The procedure removes inflammatory cytokines, which are pain-causing substances, for early reduction of TMJ pain and quick recovery of jaw function, thus increasing the possibility of a successful rehabilitation. The aim of this study was to investigate the relationship between arthroscopy synovitis grade in patients with unilateral high condylar fractures and concentrations of the pro-inflammatory cytokines tumour necrosis factor (TNF)-alpha as well as of matrix metalloproteinases (MMPs) in washed-out synovial fluid (SF) samples obtained from those patients. A total of 26 patients with unilateral high condylar fractures who underwent arthrocentesis for a therapeutic purpose were examined. SF samples were collected before performing arthroscopy to determine synovitis grade. The detection rates and concentrations of TNF-alpha and MMPs were determined, and their association with synovitis grade was analysed. TNF-alpha was detected in 23 and MMP-3 in 22 of the TMJs. There was a correlation between synovitis grade and concentration of TNF-alpha in the fracture group. Furthermore, the concentrations of TNF-alpha and MMP-3 were significantly higher as compared to the control group, comprised of TMJs on the non-fracture side of the same patients, while a correlation was also noted between TNF-alpha concentration and synovitis grade in the fracture group. The present findings may provide a biological/biochemical rationale for arthrocentesis as a reasonable treatment modality for high condylar fractures.

Estudo comparativo entre métodos manual e digital no cálculo do ângulo do platô tibial em cães / Comparative study of manual and digital method in the calculation of the tibial plateau angle in dogs

São poucos os dados publicados sobre a aplicabilidade ou a confiabilidade dos métodos digitais para mensuração do ângulo do platô tibial (APT) em comparação à mensuração manual. O objetivo deste estudo foi comparar o APT obtido pelo cálculo manual padrão, em filmes radiográficos, com os valores obtidos por cálculos em imagens digitais, por meio do software do computador. Foram analisadas radiografias digitais do membro pélvico, direito e esquerdo, em perfil verdadeiro, de 20 cães saudáveis, com idade superior a um ano. Três observadores com graus de experiência semelhantes em cálculo do APT realizaram as mensurações em cada radiografia. Primeiramente, foram calculados os ângulos dos platôs tibiais manualmente nas películas radiográficas e, posteriormente, os cálculos foram realizados na imagem digital, por meio do software para medicina veterinária do sistema de raios X digital. Os resultados do presente estudo demonstraram diferenças significativas entre os métodos, com valor das médias do cálculo digital 20,48±3.71 e do cálculo manual 23.90±4.02. Valor de P foi < 0,01 na comparação entre médias dos dois grupos. Na avaliação interobservadores, houve diferença significativa no cálculo manual no perfil direito, o que sugere maior variação no cálculo manual quando comparado ao digital. O cálculo realizado pelo software apresentou menor variação nos valores interobservadores. Acredita-se que a menor variação obtida nos resultados aqui apresentados se dê em razão das facilidades proporcionadas pelo software. Conclui-se que houve diferença entre os valores obtidos por meio dos métodos convencional e digital no cálculo do ângulo do platô tibial, sendo os valores digitais menores entre os observadores, e que o método digital no cálculo do ângulo do platô tibial levou à menor variação quando comparado ao método manual.(AU)

There are few published data on the applicability and reliability of digital methods for measuring the TPA compared with manual measurement. The objective of this study was to compare the TPA obtained by calculating standard manual on conventional radiographs, with the values obtained by calculations in digital images through a computer program. Bilateral digital radiographs of hind limb were analyzed in true profile for 20 healthy dogs older than two years. Three observers with similar levels of experience in calculating the TPA conducted measurements on each radiograph. First we calculated the angle of the tibial plateaus manually in x-ray film and then the calculations were made through the program offered by the computer program in the digital image. The results of this study showed significant differences between the methods, with average value of 20.48±3.71 digital calculating average and 23.90±2.4 in the manual calculation. P value was < 0.01 when comparing averages. No significant difference in manual calculation in right profile were found between interobserver assessments, suggesting greater variation in manual calculation compared to digital. The calculation performed by the software showed less variation in values. The slight variation obtained in our results is believed to be due to the facilities provided by the software. There was a difference between the values obtained by means of conventional and digital methods for calculating the angle of the tibial plateau, and the smaller digital values between the observers and the digital method in the calculation of the tibial plateau angle led to less variation when compared to the manual method.(AU)

Influência do posicionamento radiográfico no cálculo interobservador do ângulo do platô tibial em cães / Influence of radiographic positioning in the interobserver measuring of the tibial plateau angle in dogs

O objetivo deste trabalho foi demonstrar que o posicionamento radiográfico inadequado do membro pélvico de cães (imagens obliquadas) afeta a mensuração do ângulo do platô tibial (APT), levando à maior variação entre observadores. Foram realizadas duas projeções radiográficas nos membros pélvicos direito e esquerdo, uma em perfil verdadeiro e a outra com o membro obliquado em 21 cães provenientes do atendimento clínico cirúrgico do Hospital Veterinário da Universidade de Cuiabá, em Cuiabá-MT. Os critérios de inclusão foram cães livres de histórico ou afecção ortopédica nos membros pélvicos, pesando entre 15 e 40 quilos, sem predileção por raça ou sexo, entre dois e sete anos de idade. Foram obtidas 42 imagens radiográficas em perfil verdadeiro e 42 imagens radiográficas obliquadas. Três observadores com experiência em cálculo do APT fizeram as mensurações. Nos cálculos das imagens em perfil verdadeiro, o observador 1 obteve uma média de 23,35º ± 2,82; o observador 2, média de 23,88º ± 4,83; e o observador 3, média de 24,54º ± 4,01, não sendo encontrada diferença significativa entre o cálculo dos três avaliadores, P=0,944 (P > 0,05), nas imagens em perfil verdadeiro. Nos cálculos das imagens obliquadas, o observador 1 obteve uma média de 21,69º ± 4,22; o observador 2, média de 19,42º ± 5,92; e o observador 3, média de 22,64º ± 5,23, e foi encontrada diferença significativa entre o cálculo dos três observadores, P=0,016 (P < 0,05). Com esses dados, pôde-se demonstrar que a imagem radiográfica obliquada compromete o valor final do cálculo do ângulo do platô tibial em cães, levando à variação numérica estatisticamente significativa entre observadores. Conclui-se, assim, que um posicionamento correto do membro pélvico, em perfil verdadeiro, deve ser sempre utilizado para a obtenção de imagens, com o objetivo de mensurar o valor do APT.(AU)

This work aimed at demonstrating that an inadequate radiographic position of pelvic limbs of dogs, from a strict lateral radiographic view, resulted in oblique images, affecting the measurement of the tibial plateau angle (TPA). There were two radiographic projections of the right and the left pelvic limb, one in strict lateral radiographic view and another with inclined hind limb in 21 dogs from the clinical surgical assistance at Hospital Veterinário of Universidade de Cuiabá in Cuiabá-MT. Inclusion criteria were dogs free from pelvic hind limbs orthopedic affection records, weighing between 15 and 40 kilos, without a preference for breed or gender and ageing between two and seven years old. A total of 42 radiographic images in strict lateral radiographic view and 42 inclined limb radiographic views were obtained. Three observers with TPA calculation experience made measurements. In the calculus for the strict lateral radiographic view the first observer has reached an average of 23,35º ± 2,82, the second observer 23,88º ± 4,83 and the third observer 24,54º ± 4,01. No significant statistic differences among the calculus of the three evaluators p=0,944 (P>0,05) was found. In the calculus of the inclined limbs radiographic views the first observer reached an average of 21,69º ± 4,22, the second observer 19,42º ± 5,92 and the third observer 22,64º ±. 5,23. Significant statistic difference in the calculus of the three observers, p=0,016, that is to say, P<0,05 was found. The data indicated that the inclined limb radiographic image compromises the final value of the calculation of tibial plateau angle in dogs. Thus, correct positioning of the pelvic limb, in a strict lateral radiographic view, must be always used for obtaining images aiming at measuring the value of TPA.(AU)

Chemical etching of silicon carbide in pure water by using platinum catalyst.

Chemical etching of SiC was found to proceed in pure water with the assistance of a Pt catalyst. A 4H-SiC (0001) wafer was placed and slid on a polishing pad in pure water, on which a thin Pt film was deposited to give a catalytic nature. Etching of the wafer surface was observed to remove protrusions preferentially by interacting with the Pt film more frequently, thus flattening the surface. In the case of an on-axis wafer, a crystallographically ordered surface was obtained with a straight step-and-terrace structure, the height of which corresponds to that of an atomic bilayer of Si and C. The etching rate depended upon the electrochemical potential of Pt. The vicinal surface was observed at the potential at which the Pt surface was bare. The primary etching mechanism was hydrolysis with the assistance of a Pt catalyst. This method can, therefore, be used as an environmentally friendly and sustainable technology.

Experimental comparison between tractional and compressive stress on temporomandibular joint.

OBJECTIVE: We experimentally compared the effects of compressive and tractional mechanical stress on the temporomandibular joint (TMJ) of rabbits to assess the etiology of progressive condylar resorption. MATERIALS AND METHODS: We performed a cortical osteotomy using custom-made devices that were lengthened by 0.25 mm every 12 h for 1 week after surgery. During this time, the rabbit TMJ was under compressive or tractional mechanical stress. The samples in each group were examined using micro-computed tomography and histological staining. RESULTS: Scores for the area of bone resorption were higher in the compressive group than in the tractional group. Moreover, scores for the depth of bone resorption were higher in the compressive group than those in the tractional group. We observed a significantly higher prevalence of resorption in the subcondylar bone in the compressive group than in the tractional group. There were substantially more cells that were positive for tartrate-resistant acid phosphatase in the compressive group than in the control and tractional groups. CONCLUSIONS: The outcomes here suggest that excessive mechanical stress, particularly compressive mechanical stress, may significantly affect morphological bone change findings in the TMJ.

Predictive models for conversion of prediabetes to diabetes.

AIM: To clarify the natural course of prediabetes and develop predictive models for conversion to diabetes. METHODS: A retrospective longitudinal study of 2105 adults with prediabetes was carried out with a mean observation period of 4.7years. Models were developed using multivariate logistic regression analysis and verified by 10-fold cross-validation. The relationship between [final BMI minus baseline BMI] (δBMI) and incident diabetes was analyzed post hoc by comparing the diabetes conversion rate for low (< -0.31kg/m2) and high δBMI (≥ -0.31kg/m2) subjects after matching the two groups for the covariates. RESULTS: Diabetes developed in 252 (2.5%/year), and positive family history, male sex, higher systolic blood pressure, plasma glucose (fasting and 1h- and 2h-values during 75g OGTT), hemoglobin A1c (HbA1c) and alanine aminotransferase were significant, independent predictors for the conversion. By using a risk score (RS) that took account of all these variables, incident diabetes was predicted with an area under the ROC curve (95% CI) of 0.80 (0.70-0.87) and a specificity of prediction of 61.8% at 80% sensitivity. On division of the participants into high- (n=248), intermediate- (n=336) and low-risk (n=1521) populations, the conversion rates were 40.1%, 18.5% and 5.9%, respectively. The conversion rate was lower in subjects with low than high δBMI (9.2% vs 14.4%, p=0.003). CONCLUSIONS: Prediabetes conversion to diabetes could be predicted with accuracy, and weight reduction during the observation was associated with lowered conversion rate.

Impact of weight gain on the evolution and regression of prediabetes: a quantitative analysis.

BACKGROUND/OBJECTIVES: The quantitative impact of weight gain on prediabetic glucose dysregulation remains unknown; only one study quantitated the impact of weight loss. We quantified the impact of weight gain on the evolution and regression of prediabetes (PDM). SUBJECTS/METHODS: In 4234 subjects without diabetes, using logistic regression analysis with a 4.8-year follow-up period, we analyzed the relationship between (1) δBMI (BMIfollow-up-basal) and the progression from normal glucose regulation (NGR) to PDM or diabetes, and (2) δBMI and the regression from PDM to NGR. RESULTS: Mean (±s.d.) δBMI was 0.17 (±1.3) kg/m2 in subjects with NGR and δBMI was positively and independently related to progression (adjusted odds ratio (ORadj) (95% CI), 1.24 (1.15-1.34), P<0.01). Mean (±s.d.) δBMI was -0.03 (±1.25) kg/m2 in those with PDM and δBMI was negatively related to the regression (ORadj, 0.72 (0.65-0.80), P<0.01). The relation of δBMI to the progression was significant in men (ORadj, 1.42 (1.28-1.59), P<0.01) but not in women (ORadj, 1.05 (0.94-1.19), P=0.36). Also, the negative impact of δBMI on the regression was significant only in men (men, ORadj, 0.65 (0.57-0.75), P<0.01; women, ORadj, 0.94 (0.77-1.14), P=0.51). CONCLUSIONS: In Japanese adults, an increase in the BMI by even 1 kg/m2 was related to 24% increase in the risk of development of PDM or diabetes in NGR subjects and was related to 28% reduction in the regression from PDM to NGR. In women, we did not note any significant impact of weight gain on the evolution or regression of PDM.

Development of array-type atmospheric-pressure RF plasma generator with electric on-off control for high-throughput numerically controlled processes.

An array-type atmospheric-pressure radio-frequency (RF) plasma generator is proposed for high-precision and high-throughput numerically controlled (NC) processes. We propose the use of a metal-oxide-semiconductor field-effect transistor (MOSFET) circuit for direct RF switching to achieve plasma on-off control. We confirmed that this type of circuit works correctly using a MOSFET with a small parasitic capacitance between its source and gate. We examined the design method for the distance between adjacent electrodes, which corresponds to the parasitic capacitance between adjacent electrodes and is very important in the individual on-off control of each electrode. We developed a prototype array-type plasma generator apparatus with 19 electrodes and the same number of MOSFET circuits; we then confirmed that each electrode could control its plasma on-off state individually. We also demonstrated that the thickness uniformity of the surface Si layer of a silicon-on-insulator wafer could be processed to less than 1 nm peak to valley by the NC sacrificial oxidation method using the apparatus.

Magnetodielectric detection of magnetic quadrupole order in Ba(TiO)Cu4(PO4)4 with Cu4O12 square cupolas.

In vortex-like spin arrangements, multiple spins can combine into emergent multipole moments. Such multipole moments have broken space-inversion and time-reversal symmetries, and can therefore exhibit linear magnetoelectric (ME) activity. Three types of such multipole moments are known: toroidal; monopole; and quadrupole moments. So far, however, the ME activity of these multipole moments has only been established experimentally for the toroidal moment. Here we propose a magnetic square cupola cluster, in which four corner-sharing square-coordinated metal-ligand fragments form a noncoplanar buckled structure, as a promising structural unit that carries an ME-active multipole moment. We substantiate this idea by observing clear magnetodielectric signals associated with an antiferroic ME-active magnetic quadrupole order in the real material Ba(TiO)Cu4(PO4)4. The present result serves as a useful guide for exploring and designing new ME-active materials based on vortex-like spin arrangements.