Hypermethylation of Bmp2 and Fgfr2 Promoter Regions in Bone Marrow Mesenchymal Stem Cells Leads to Bone Loss in Prematurely Aged Mice.

Osteoporosis is an age-related, systemic skeletal disease that poses a significant public health challenge in contemporary society. Development at the epigenetic level is emerging as an important pathogenic mechanism of osteoporosis. Despite indications of a robust association between DNA methylation and osteoporosis development, a comprehensive understanding of the specific role of DNA methylation in osteoporosis remains limited. In this study, significant bone loss was detected at the beginning of eight weeks of age in mouse models of premature aging (SHJHhr mice). We identified a notable upregulation of DNA methyltransferase 3b/3l (Dnmt3b/l) and downregulation of ten eleven translocation dioxygenase 1 (Tet1) in bone marrow mesenchymal stem cells (BMSCs) isolated from SHJHhr mice, along with an increase in the overall 5-methylcytosine (5mC) levels. Moreover, methylation capture sequencing revealed genomic hypermethylation in SHJHhr mice BMSCs. Integrated methylome and transcriptome analyses revealed several crucial methylated genes and networks that are potentially associated with osteoporosis development. Notably, elevated methylation levels of genes linked to the Wnt signaling pathway, particularly bone morphogenetic protein 2 (Bmp2) and fibroblast growth factor receptor (Fgfr2), appeared to compromise the osteogenic differentiation potential of BMSCs. Concurrently, DNA methyltransferase inhibitors attenuated the methylation of the promoter regions of Bmp2 and Fgfr2 and rescued the osteogenic differentiation potential of the BMSCs from SHJHhr mice. In summary, our study provides novel insights into the role of DNA methylation in the development of osteoporosis and suggests promising prospects for employing epigenetic interventions to manage osteoporosis.

A New Method to Predict Postoperative Stem Anteversion in Total Hip Arthroplasty for Developmental Dysplasia of the Hip.

BACKGROUND: Preoperative evaluation of femoral anteversion to predict postoperative stem anteversion aids the selection of an appropriate prosthesis and optimizes the combined anteversion in total hip arthroplasty (THA) for developmental dysplasia of the hip (DDH). The conventional prediction methods are based on the femoral anteversion measurement at the location of the femoral head and/or neck. However, varied differences between femoral anteversion and postoperative stem anteversion were demonstrated. This study investigated the predictive role of a new method based on the principle of sagittal three-point fixation. METHODS: From January 2017 to December 2018, a total of 133 DDH hips that underwent THA were retrospectively analyzed. There were 76 Crowe type I, 27 type II, and 30 type III hips. The single-wedge stem was used in 49 hips, and the double-wedge stem was used in 84 hips. Preoperative native femoral anteversion at the femoral head-neck junction, anterior cortex anteversion at 2 levels of the lesser trochanter, posterior cortex anteversion at 5 levels of the femoral neck, and postoperative stem anteversion were measured using two-dimensional computed tomography. Predictive anteversion by the new method was calculated as the average anteversion formed by the anterior cortex at the lesser trochanter and the posterior cortex at the femoral neck. RESULTS: For hips with different neck heights, different Crowe types, different stem types, or different femoral anteversions, native femoral anteversion showed widely varied differences and correlations with stem anteversion, with differences ranging from -1.27 ± 8.33° to -13.67 ± 9.47° and correlations ranging from 0.122 (p = 0.705, no correlation) to 0.813. Predictive anteversion formed by the anterior cortex at the lesser trochanter proximal base and posterior cortex 10 mm above the lesser trochanter proximal base showed no significant difference with stem anteversion, with less varied differences (0.92 ± 7.52°) and good to excellent correlations (r = 0.826). CONCLUSION: Adopting our new method, predictive anteversion, measured as the average anteversion of the anterior cortex at the lesser trochanter proximal base and posterior cortex 10 mm above the lesser trochanter proximal base, predicted postoperative stem anteversion more reliably than native femoral anteversion.

A Radiographic Analysis of Coronal Morphological Parameters of Lower Limbs in Chinese Non-knee Osteoarthritis Populations.

OBJECTIVES: Analyzing the lower limb coronal morphological parameters in populations without knee osteoarthritis (KOA) holds significant value in predicting, diagnosing, and formulating surgical strategies for KOA. This study aimed to comprehensively analyze the variability in these parameters among Chinese non-KOA populations, employing a substantial sample size. METHODS: A cross-sectional retrospective analysis was performed on the Chinese non-KOA populations (n = 407; 49.9% females). The study employed an in-house developed artificial intelligence software to meticulously assess the coronal morphological parameters of all 814 lower limbs. The parameters evaluated included the hip-knee-ankle angle (HKAA), weight-bearing line ratio (WBLR), joint line convergence angle (JLCA), mechanical lateral-proximal-femoral angle (mLPFA), mechanical lateral-distal-femoral angle (mLDFA), mechanical medial-proximal-tibial angle (mMPTA), and mechanical lateral-distal-tibial angle (mLDTA). Differences in these parameters were compared between left and right limbs, different genders, and different age groups (with 50 years as the cut-off point). RESULTS: HKAA and JLCA exhibited left-right differences (left vs. right: 178.2° ± 3.0° vs. 178.6° ± 2.9° for HKAA, p = 0.001; and 1.8° ± 1.5° vs. 1.4° ± 1.6° for JLCA, p < 0.001); except for the mLPFA, all other parameters show gender-related differences (male vs. female: 177.9° ± 2.8° vs. 179.0° ± 3.0° for HKAA, p < 0.001; 1.5° ± 1.5° vs. 1.8° ± 1.7° for JLCA, p = 0.003; 87.1° ± 2.1° vs. 88.1° ± 2.1° for mMPTA, p < 0.001; 90.2° ± 4.0° vs. 91.1° ± 3.2° for mLDTA, p < 0.001; 38.7% ± 12.9% vs. 43.6% ± 14.1% for WBLR, p < 0.001; and 87.7° ± 2.3° vs. 87.4° ± 2.7° for mLDTA, p = 0.045); mLPFA increase with age (younger vs. older: 90.1° ± 7.2° vs. 93.4° ± 4.9° for mLPFA, p < 0.001), while no statistical difference exists for other parameters. CONCLUSIONS: There were differences in lower limb coronal morphological parameters among Chinese non-KOA populations between left and right sides, different genders, and age.

Cell-free fat extract-loaded microneedles attenuate inflammation-induced apoptosis and mitochondrial damage in tendinopathy.

Existing clinical treatments for tendinopathy mainly focus on reducing pain, whereas inhibiting or reversing disease progression remains challenging. Local therapeutic drugs, such as glucocorticoids, cause adverse effects on the metabolism of tendon tissues and injection-related complications. Therefore, new administration modalities for tendinopathy need to be developed. In this study, we designed a hydrogel-based microneedle (MN) system for the long-term transdermal delivery of our novel biological cell-free fat extract (CEFFE) to treat tendinopathies. We found that CEFFE-loaded MNs (CEFFE-MNs) had good biosafety and inhibited lipopolysaccharide (LPS)-induced apoptosis and matrix degradation in Achilles tendon cells of rats. The Achilles tendons of rats returned to their maximum mechanical strength after applying CEFFE-MNs. The administration of CEFFE-MNs had better anti-apoptosis and tendon repair-promoting effects than CEFEF injections in vivo. Transcriptome sequencing indicated that the anti-apoptosis effect of CEFFE-MNs was highly related to tumor necrosis factor (TNF) signaling. CEFFE-MNs inhibited the expression of TNF, TNF receptor 1, and downstream nuclear factor-kappa B signaling. Additionally, CEFFE-MNs rescued LPS-induced mitochondrial dynamics in tendon cells via the TNF-Drp1 axis. Our study reports a novel CEFFE-MN system that exhibits long-term anti-inflammatory and anti-apoptotic effects, suggesting it as a new treatment route for tendinopathy with broad clinical translation prospects.

Pre-Surgery Hip-Knee-Ankle Angle and Weightbearing Line Percentage Are Nearly Perfectly Correlated to the Miniaci Angle When Planning Open Wedge High Tibial Osteotomies.

PURPOSE: To investigate the conversion formulas between the Miniaci angle, presurgery parameters, and changes in presurgery parameters in open-wedge high tibial osteotomy (OWHTO), including hip-knee-ankle (HKA) angle, weightbearing line (WBL) percentage, mechanical medial proximal tibial angle (mMPTA), ΔHKA angle, ΔWBL percentage, ΔmMPTA, and other parameters. METHODS: From January 2012 to December 2019, 247 lower limbs of 144 patients with medial unicompartmental knee osteoarthritis combined with proximal tibia vara were enrolled. Inclusion criteria were adults, medial unicompartmental knee osteoarthritis, Kellgren-Lawrence classification grade ≤ III, mMPTA ≤ 85°, normal mechanical lateral distal femoral angle (85°-90°), and patella facing anterior in the bipedal standing position. Exclusion criteria were history of fracture, trauma, or orthopaedic surgery; developmental dysplasia of the hip or femoral head necrosis; femoral bowing deformity; deformity of the tibial shaft; and leg length discrepancy. Using standing whole-leg radiographs, an OWHTO simulation was performed to determine the Miniaci angle by delivering the WBL to the Fujisawa point. The relationship of the Miniaci angle, the presurgery parameters, and the changes in presurgery parameters were analyzed by Spearman's correlation and linear regression analyses. The relationship between the postsurgery HKA angle and presurgery parameters was analyzed by multiple linear regression model. RESULTS: The Miniaci angle showed a near-perfect correlation with the presurgery HKA angle (y = -1.05x + 192.10, r2 = 0.99), presurgery WBL percentage (y = -0.25x + 15.14, r2 = 0.97), ΔHKA angle (y = 1.04x - 0.03, r2 = 1.00), ΔWBL percentage (y = 0.25x - 0.52, r2 = 0.97), and ΔmMPTA (y = 1.04x - 0.03, r2 = 1.00). The ΔHKA angle showed nearly perfect correlation with the ΔmMPTA (y = 1.00x, r2 = 1.00), and ΔWBL percentage (y = 0.24x - 0.47, r2 = 0.97). CONCLUSIONS: The presurgery HKA angle, presurgery WBL percentage, ΔHKA angle, ΔWBL, and ΔmMPTA percentage are nearly perfectly correlated to the Miniaci angle, whereas the ΔmMPTA and ΔWBL percentage are nearly perfectly correlated to the ΔHKA angle. With the conversion formulas determined in the current study, surgeons can calculate the Miniaci angle based on the presurgery parameters without the assistance of digital software for complex surgical simulation. The Miniaci angle is closely related to the gap of the medial opening wedge. Based on the Miniaci angle and the depth of the osteotomy, surgeons can calculate the gap required before surgery using trigonometric functions and then simply measure the gap during surgery.

Lateral tibial intercondylar eminence is a reliable reference for alignment correction in high tibial osteotomy.

PURPOSE: The purpose of the study is to determine whether the lateral tibial intercondylar eminence (LTIE) is a reliable reference for alignment correction in high tibial osteotomy (HTO). METHODS: A total of 1954 consecutive standing whole-leg radiography (WLR) examinations of 1373 adult patients with knee osteoarthritis between 2012 and 2019 were reviewed retrospectively; 145 patients were included, 53 males and 92 females, with a mean age of 63.3 years. Virtual simulation of HTO was performed to measure weight-bearing line (WBL) percentages and hip-knee-ankle (HKA) angles when the WBL passed through the Fujisawa, top, bottom, upper 1/3, and middle points of the lateral slope of the LTIE, and the positional relationship between the Fujisawa point and the lateral slope of the LTIE was determined. RESULTS: When the WBL passed through the top, bottom, upper 1/3, and middle points of the lateral slope of the LTIE, the mean WBL percentages were 57.7% ± 2.1%, 74.6% ± 3.3%, 63.4% ± 2.1%, and 66.2% ± 2.3%, respectively, and the mean HKA angles were 182.1° ± 0.5°, 185.9° ± 0.8°, 183.3° ± 0.5°, and 184.0° ± 0.5°, respectively. When the WBL passed through the Fujisawa point, it was passing through 28.6% ± 12.7% of the width of the lateral slope (the top and bottom points were defined as 0% and 100%, respectively). When the WBL passed through the middle and upper 1/3 points of the lateral slope of the LTIE, the majority of cases (96.1%-100%) were within the limits of acceptability, as defined by the widely accepted standard of a postoperative HKA angle ranging from 183° to 186°. CONCLUSION: The upper 1/3 and middle points of the lateral slope of the LTIE are reliable references for guiding the alignment correction in HTO. In clinical application, if 62%-66% of the postoperative WBL percentage is the acceptable target range, the upper 1/3 point of the lateral slope of the LTIE may be a better alternative than the midpoint. If the postoperative HKA angle between 183° and 186° is acceptable, the midpoint of the lateral slope of the LTIE may be better than the upper 1/3 point. These findings are crucial for the accuracy of the traditional intraoperative alignment assessment techniques. LEVEL OF EVIDENCE: IV.

Irisin promotes fracture healing by improving osteogenesis and angiogenesis.

Background: Osteogenesis and angiogenesis are important for bone fracture healing. Irisin is a muscle-derived monokine that is associated with bone formation. Methods: To demonstrate the effect of irisin on bone fracture healing, closed mid-diaphyseal femur fractures were produced in 8-week-old C57BL/6 mice. Irisin was administrated intraperitoneally every other day after surgery, fracture healing was assessed by using X-rays. Bone morphometry of the fracture callus were assessed by using micro-computed tomography. Femurs of mice from each group were assessed by the three-point bending testing. Effect of irisin on osteogenic differentiation in mesenchymal stem cells in vitro was evaluated by quantitative real-time polymerase chain reaction (qRT-PCR), alkaline phosphatase staining and alizarin red staining. Angiogenesis of human umbilical vein endothelial cells (HUVECs) were evaluated by qRT-PCR, migration tests, and tube formation assays. Results: Increased callus formation, mineralization and tougher fracture healing were observed in the irisin-treated group than in the control group, indicating the better fracture callus healing due to Irisin treatment. The vessel surface and vessel volume fraction of the callus also increased in the irisin-treated group. The expression of BMP2, CD31, and VEGF in callus were enhanced in the irisin-treated group. In mouse bone mesenchymal stem cells, irisin promoted ALP expression and mineralization, and increased the expression of osteogenic genes, including OSX, Runx2, OPG, ALP, OCN and BMP2. Irisin also promoted HUVEC migration and tube formation. Expression of angiogenic genes, including ANGPT1, ANGPT2, VEGFb, CD31, FGF2, and PDGFRB in HUVECs were increased by irisin. Conclusion: All the results indicate irisin can promote fracture healing through osteogenesis and angiogenesis. These findings help in the understanding of muscle-bone interactions during fracture healing. The Translational Potential of this Article: Irisin was one of the most important monokine secreted by skeletal muscle. Studies have found that irisin have anabolic effect one bone remodeling through affecting osteocyte and osteoblast. Based on our study, irisin could promote bone fracture healing by increasing bone mass and vascularization, which provide a potential usage of irisin to promote fracture healing and improve clinical outcomes.

Use of a Gigli Saw as a Substitute Osteotomy Tool When Oscillating Saw Malfunctions Occur During Hip Arthroplasty.

OBJECTIVE: The oscillating saw has some inherent disadvantages, such as notch formation and blood splash. The objective is to introduce the Gigli saw as a substitute osteotomy tool when oscillating saw malfunctions occur during surgery. METHODS: During our retrospective study, 120 patients (120 hips) who underwent primary total hip arthroplasty (THA) because of femoral neck fracture, femoral head necrosis, developmental hip dysplasia (Crowe I), or primary osteoarthritis between October 2017 and April 2020 at our institute were included. Sixty patients (26 men and 34 women) with a mean age of 67.3 years (±15.1 years) underwent femoral neck osteotomy using a Gigli saw. The other 60 patients (32 men and 28 women) with a mean age of 64.4 years (±18.8 years) underwent femoral neck osteotomy using an oscillating saw. Intraoperative evaluations, including osteotomy time, osteotomy height, number of notch formations, and blood splash generation, were performed. Routine anteroposterior views of the pelvis and proximal femur were obtained for all patients after surgery. RESULTS: The mean osteotomy times were 26.60 ± 14.80 s and 31.80 ± 14.20 s with the oscillating saw and Gigli saw, respectively (t = 1.964, P = 0.0519). The mean osteotomy heights were 1.26 ± 0.22 cm and 1.20 ± 0.14 cm with the oscillating saw and Gigli saw, respectively (t = 1.782, P = 0.0773). The use of a Gigli saw did not result in bone notch formation or blood splash generation when multiple blood splashes were generated in the oscillating saw group. Postoperative radiographs showed no prostheses malposition in the Gigli saw and oscillating saw groups. CONCLUSION: The Gigli saw has various advantages and can be a substitute tool for femoral neck osteotomy during THA when oscillating saw malfunctions occur.

Application of a novel osteotomy instrumentation as a substitute tool in total hip arthroplasty.

BACKGROUND: Mechanical failure, power shortage, and inadvertent contamination of the oscillating saw occasionally occurs in actualizing femoral neck osteotomy during total hip arthroplasty (THA); however, no appropriate alternative solution is currently available. This study aimed to introduce a novel osteotomy instrumentation (fretsaw, jig, cable passer hook) as a substitute tool while the oscillating saw was unavailable during THA. METHODS: This study included 40 patients (40 hips) who underwent femoral neck osteotomy during primary THA using the new osteotomy instrumentation (n = 20) and the oscillating saw (n = 20). Clinical data and intraoperative findings of all patients were evaluated. RESULTS: The mean osteotomy time was 22.3 ± 3.1 s (range, 17-30 s) and 29.4 ± 3.7 s (range, 25-39 s) in the oscillating saw group and in the new osteotomy instrumentation group, respectively (P < 0.001). The Harris Hip Score (HHS) improved in both groups; the mean HSS was 82.3 ± 2.5 and 83.3 ± 3.5 in the oscillating saw group and new osteotomy instrumentation group at 6 months after surgery, respectively (P = 0.297). CONCLUSIONS: The original osteotomy instrumentation can be an ideal substitute tool for femoral neck osteotomy in THA, especially when the oscillating saw is unavailable or malfunctioning.

HKA Angle-A Reliable Planning Parameter for High Tibial Osteotomy: A Theoretical Analysis Using Standing Whole-Leg Radiographs.

High tibial osteotomy (HTO) is a recognized treatment for early-stage medial compartment knee osteoarthritis. Preoperative planning with standing whole-leg radiographs (WLRs) is essential for ensuring optimal postoperative alignment. The primary purpose of this study is to investigate the theoretical accuracy of the wedge opening required for two different preoperative planning parameters in open-wedge HTO. The second purpose is to theoretically determine which parameter is superior. Preoperative planning for HTO was performed with standing WLRs for 39 knees with isolated medial osteoarthritis. The Miniaci preoperative planning method was applied to correct the hip-knee-ankle (HKA) angle to 3to 6 degrees of valgus and the weight-bearing line (WBL) percentage within 60 to 70% of the width of the tibial plateau. To ensure that the HKA angle was between 3 and 6 degrees of valgus, the required accuracy window for the Miniaci angle was 3.25 ± 0.03 degrees (range, 3.20-3.30°). To ensure that the WBL percentage was between 60 and 70%, the accuracy window required for the Miniaci angle was 2.35 ± 0.13 degrees (range, 2.10-2.65°). This study suggests that to correct the HKA angle and the WBL percentage within the target range on two-dimensional WLRs, the Miniaci angle must be controlled to an accuracy of ± 1.63 and ± 1.18 degrees, respectively. Theoretically, the HKA angle is highly suitable as a preoperative planning parameter for HTO with a large permissible error and a small variability in the degree of change in the Miniaci angle (ΔMiniaci).

Abnormal subchondral trabecular bone remodeling in knee osteoarthritis under the influence of knee alignment.

OBJECTIVE: This study aimed to investigate the abnormal subchondral trabecular bone (STB) remodeling in knee osteoarthritis (OA) under the influence of knee alignment [hip-knee-ankle (HKA) angle]. DESIGN: Forty-one patients with knee OA underwent radiographic examination before total knee arthroplasty (TKA) for the measurement of HKA angle. Tibial plateau specimens obtained during TKA were used for histomorphometric analyses to assess STB remodeling and cartilage degradation. Tartrate-resistant acidic phosphatase (TRAP) staining was used to test osteoclast activity. Osterix, osteocalcin, and sclerostin expression in the STB were determined using immunohistochemistry. RESULTS: The interaction between HKA angle and side (medial vs lateral of tibial plateau) was the main significant influence factor for STB remodeling and microstructure. The STB with the deviation of the knee alignment was accompanied by obvious abnormal bone remodeling and microstructural sclerosis. Bone volume fraction (BV/TV) was the only significant influence factor for OARSI score, the larger the BV/TV of STB, the higher the OARSI score of cartilage. Moreover, the tibial plateau affected by alignment had more TRAP + osteoclasts, Osterix + osteoprogenitors, and osteocalcin + osteoblasts and fewer sclerostin + osteocytes. CONCLUSIONS: The variation of tibial plateau STB remodeling activity and microstructure was associated with HKA angle and cartilage degradation. Knee malalignment may cause abnormal STB remodeling and microstructural sclerosis, which may potentially affect load stress transmission from the cartilage to the STB, thus resulting in accelerated knee OA progression.

Associations of osteoclastogenesis and nerve growth in subchondral bone marrow lesions with clinical symptoms in knee osteoarthritis.

BACKGROUND/OBJECTIVE: Subchondral bone marrow lesions (BMLs) are common magnetic resonance imaging (MRI) features in joints affected by osteoarthritis (OA), however, their clinical impacts and mechanisms remain controversial. Thus, we aimed to investigate subchondral BMLs in knee OA patients who underwent total knee arthroplasty (TKA), then evaluate the associations of osteoclastogenesis and nerve growth in subchondral BMLs with clinical symptoms. METHODS: Total 70 patients with primary symptomatic knee OA were involved, then separated into three groups based on MRI (without BMLs group, n â€‹= â€‹14; BMLs without cyst group, n â€‹= â€‹37; BMLs with cyst group, n â€‹= â€‹19). Volume of BMLs and cyst-like lesions was calculated via the OsiriX system. The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) questionnaire was used to assess clinical symptoms. Histology and immunohistochemistry were deployed to assess subchondral osteoclastogenesis and nerve distribution. Pearson's correlation coefficient was used to evaluate the associations between volume of BMLs and joint symptoms, and to assess the associations of osteoclastogenesis and nerve growth in subchondral BMLs with joint symptoms. RESULTS: In BMLs combined with cyst group, patients exhibited increased osteoclastogenesis and nerve distribution in subchondral bone, as shown by increased expression of tartrate resistant acid phosphatase (TRAP) and protein gene product 9.5 (PGP9.5). Volume of subchondral cyst-like component was associated with joint pain (p â€‹< â€‹0.05). Subchondral osteoclastogenesis and nerve distribution were positively associated with joint pain in BMLs with cyst group (p â€‹< â€‹0.05). CONCLUSION: The subchondral cyst-like lesion was an independent factor for inducing pain in OA patients; osteoclastogenesis and nerve growth in subchondral cyst-like lesions could account for this joint pain. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: Our results indicated that the increased osteoclastogenesis and nerve growth in subchondral cyst-like lesions could account for the pain of OA joints. These findings may provide valuable basis for the treatment of OA.

Positive Correlation Between the Femur Neck Shaft and Anteversion Angles: A Retrospective Computed Tomography Analysis in Patients With Developmental Dysplasia of the Hip.

BACKGROUND: This study aimed to explore the anatomical correlation between the femoral neck shaft angle (NSA) and femoral anteversion angle (AA) in patients with developmental dysplasia of the hip based on the Crowe classification and provide a novel method to estimate the femoral AA on anteroposterior pelvic radiographs. METHODS: A total of 208 patients with dysplastic hips who underwent total hip arthroplasty at our institution were retrospectively included. Preoperative physiological AA and NSA were determined via 3-dimensional computed tomography. Linear regressions and Pearson's coefficients were calculated to assess the correlation between the femoral NSA and femoral AA. RESULTS: A total of 416 hips were divided into 5 subgroups: 99 normal, 143 type I, 71 type II, 63 type III, and 40 type IV hips following the Crowe classification. Dysplastic femurs had significantly higher AAs than normal hips (25.2° vs 31.4° vs 33.3° vs 35.5° vs 41.7°). Significant positive correlations between the AA and NSA were observed in normal (r = 0.635), type I (r = 0.700), type II (r = 0.612), and type III (r = 0.638) hips (P < .001); however, no meaningful correlation was observed in type IV hips (r = 0.218, P = .176). CONCLUSION: The NSA and AA correlated positively and significantly in the normal and dysplastic Crowe type I-III hips. The relationship between the NSA and AA indicates torsion of the proximal femur and offers an opportunity for straightforward estimation of AA based on NSA.

[Semi-automated measurement and analysis of three-dimensional acetabular orientation in asymptomatic population and patients of developmental dysplasia of the hip].

OBJECTIVE: To evaluate the three-dimensional acetabular orientation in asymptomatic population and patients of developmental dysplasia of the hip (DDH) using a semi-automated measurement software, which provides data for the differential diagnosis, surgical planning, surgical instrument design, and postoperative evaluation of hip related diseases. METHODS: Eighty-four cases of CT data in asymptomatic population (asymptomatic group) and 47 cases of CT data in DDH patients (DDH group) were collected. There was no significant difference in gender and age (including age of male and female subgroups) between the two groups ( P<0.05). MaxTHA, a semi-automatic measurement software, was used to measure acetabular inclination and anteversion, including operative inclination (OI), radiographic inclination (RI), anatomic inclination (AI), operative anteversion (OA), radiographic anteversion (RA), and anatomic anteversion (AA). Comparisons were made between the two populations, between different Crowe classification subgroups, between different gender subgroups, and between left and right sides of acetabula. RESULTS: The comparison between asymptomatic group, healthy side of DDH group, and affected side of DDH group showed that there was no significant difference in acetabular orientation between asymptomatic group and healthy side of DDH group ( P>0.05). The OI, RI, and AI of affected side of DDH group were significantly higher than those in healthy side of DDH group and asymptomatic group, and AA was significantly lower than that in healthy side of DDH group and asymptomatic group ( P<0.05). The comparison between the normal acetabula and DDH acetabula with different Crowe classifications showed that there was no significant difference in the acetabulum orientation between Crowe Ⅰ group and the normal group ( P>0.05). The OI, RI, and AI of Crowe Ⅱ, Ⅲ, and Ⅳ groups were significantly higher than those of normal group ( P<0.05), the OI of Crowe Ⅲ group, RI and AI of Crowe Ⅳ group were significantly higher than those of Crowe Ⅰ group ( P<0.05), the AI of Crowe Ⅳ group was significantly higher than that of Crowe Ⅱ group ( P<0.05), and the OA, RA, and AA of Crowe Ⅲ group were significantly lower than other subgroups ( P<0.05) except Crowe Ⅰ group. The OA, RA, and AA in asymptomatic female group, and the OA and AI in DDH female group were significantly higher than those in all male groups ( P<0.05). The OI, RI, AI, and OA of the right acetabula in asymptomatic male group, and the RI and AI of the right acetabula in asymptomatic female group were significantly higher than those on the left side ( P<0.05). CONCLUSION: There were significant differences in acetabular orientation between asymptomatic and DDH populations, inter-group differences among Crowe classification subgroups, inter-gender differences among subgroups, and bilateral differences among asymptomatic individuals.

Osteocyte Apoptosis Contributes to Cold Exposure-induced Bone Loss.

Emerging evidence indicates that bone mass is regulated by systemic energy balance. Temperature variations have profound effects on energy metabolism in animals, which will affect bone remodeling. But the mechanism remains unclear. 2-month-old C57BL/6J male mice were exposed to cold (4°C) and normal (23°C) temperatures for 28 days and the effects of cold exposure on bone mass was investigated. Micro-computed tomography results showed that bone volume fraction was significantly reduced after 14 days of exposure to cold temperature, and it was recovered after 28 days. Ploton silver staining and immunohistochemical results further revealed that exposure to cold decreased canalicular length, number of E11-and MMP13-positive osteocytes after 14 days, but they returned to the baseline levels after 28 days, different from the normal temperature control group. In addition, change of Caspase-3 indicated that exposure to cold temperature augmented apoptosis of osteocytes. In vitro results confirmed the positive effect of brown adipocytes on osteocyte's dendrites and E11 expression. In conclusion, our findings indicate that cold exposure can influence bone mass in a time-dependent manner, with bone mass decreasing and recovering at 2 and 4 weeks respectively. The change of bone mass may be caused by the apoptosis osteocytes. Brown adipocyte tissue could influence bone remodeling through affecting osteocyte.

A novel efficient and precise technique for removing acetabular osteophytes in patients undergoing total hip arthroplasty: the SH-9Hospital acetabular edge file.

BACKGROUND: Total hip arthroplasty (THA) is frequently performed in patients with end-stage hip disease. Periacetabular osteophytes are common during THA; however, these osteophytes should be removed intraoperatively to avoid potential impingement between osteophytes and femoral prostheses and decrease dislocation risk. There are no current standard procedures or surgical technique criteria to remove these osteophytes. Osteophytes around the acetabulum are usually removed with an osteotome, yet this presents certain disadvantages. Hence, this study aimed to introduce a novel and more efficient technique than the aforementioned one, the SH-9Hospital acetabular edge file. METHODS: Fifty-four patients (54 hips) who underwent primary THA using osteotome and the SH-9Hospital acetabular edge file to remove periacetabular osteophytes intraoperatively were retrospectively studied. Clinical and radiographic data were obtained for all patients intra- and postoperatively. RESULTS: The mean osteophyte removal time was 274.6±102.7 s and 51.3±21.1 s in the osteotome and SH-9Hospital acetabular edge file groups, respectively. Intraoperative images and postoperative radiographs showed that acetabular osteophytes were removed thoroughly and precisely by the acetabular edge file and that there was no iatrogenic injury and prostheses malposition in both groups. CONCLUSIONS: The SH-9Hospital acetabular edge file was a novel, efficient, highly precise, and repeatable method for removing periacetabular osteophytes in patients undergoing total hip arthroplasty.

Comparison of 3D Printing Rapid Prototyping Technology with Traditional Radiographs in Evaluating Acetabular Defects in Revision Hip Arthroplasty: A Prospective and Consecutive Study.

OBJECTIVE: To compare rapid prototyping technology (RP tech) in revision total hip arthroplasty (RTHA) with traditional examination methods and to see how they are different in evaluating acetabular anatomy and designing surgical procedure. METHODS: From February 2014 to March 2018, 43 RTHA patients with complex acetabulum defects were enrolled in this prospective study regardless of age or gender. Incomplete and unclear data were excluded. Three types of radiographic examination were performed on each patient before the revision surgery. Four groups of evaluations were designed: (i) X-ray; (ii) computed tomography (CT-scan); (iii) RP tech; and (iv) CT-aided RP tech. Discrepancies between preoperative radiographic analysis and intra-operative findings were separately compared by a team of surgeons. Premade surgical plans based on each evaluation method were compared with the final surgical procedure. The compliance of anatomic evaluation and surgical plan-design based on 3D RP tech and traditional radiographs were ranked manually by a of team surgeons into: (i) complete accordance; (ii) general accordance; and (iii) undetermined structure/procedure. The difference in ranks between RP tech and traditional radiographic methods were analyzed with a nonparametric Kruskal-Wallis test. P < 0.05 was considered significant. Multiple adjustments were taken for the statistical tests level according to the Bonferroni method. RESULTS: For anatomic analysis, the accordance in four groups of evaluating methods differed from each other (P < 0.05) except for the comparison of RP tech and CT-aided RP tech. RP tech displayed better anatomic evaluating accuracy than traditional methods (X-ray and CT) with the "complete accordance" rates of these groups being 88.37%, 4.65% and 27.91%, respectively. But CT-aided RP tech did not improve accuracy significantly compared with using RP tech individually, although the value seems high in the CT-aided RP group with the "complete accordance" rate of 95.35%. For surgery design, RP tech significantly showed better applicable surgical design compared with X-ray and CT (P < 0.05), and the "complete accordance" rates were 88.37%, 6.98% and 23.26%, but no significant difference was observed between RP tech and CT-aided RP tech, and the "complete accordance" rate of CT-aided RP tech group was 97.67%. RP tech showed remarkable improvement in bone defect assessment and surgical plan design. CONCLUSION: Using RP technology improved both sensibility and accuracy in acetabular defect evaluation with better locating and evaluating efficiency compared with X-ray and CT-scans. It also improved surgical schedule designing in complex acetabular defecting revision surgery. In particularly complex cases, CT aided RP tech may increase the accuracy of RP tech.

Verification and clinical translation of a newly designed "Skywalker" robot for total knee arthroplasty: A prospective clinical study.

OBJECTIVE: To evaluate accuracy of an innovative "Skywalker" system, a newly designed, robot-assisted operation system for orthopaedics via a clinical trial at knee joint. METHODS: We conducted a prospective analysis of the clinical data of 31 patients who underwent total knee arthroplasty assisted by the "Skywalker" robot (Microport, Suzhou, China) from June 2020 to January 2021. Five male patients and 26 female patients aged 69.68 â€‹± â€‹6.11 years (range: 57-79 years) were diagnosed with knee osteoarthritis and indicated for surgery. The "Skywalker" surgical robotic system was adopted to make a preoperative plan for knee arthroplasty. When the robotic arm reached the specified position during the operation, a single surgeon performed the osteotomy with a cutting saw through the cutting jig, and the difference between the actual and the expected resection thickness, and the preoperative and postoperative lower limb alignments were measured. RESULTS: The actual error of the resection thickness was the difference between the actual and the expected resection thickness. The absolute error of the resection thickness was the absolute value of the actual error of resection thickness. The absolute errors of the resection thickness of the medial and lateral condyle of the distal femur, the medial and lateral posterior condyle of the femur, and the medial and lateral sides of the tibial plateau were 0.87 â€‹± â€‹0.63 â€‹mm, 1.02 â€‹± â€‹0.67 â€‹mm, 0.74 â€‹± â€‹0.46 â€‹mm, 0.98 â€‹± â€‹0.81 â€‹mm, 0.92 â€‹± â€‹0.66 â€‹mm, and 1.04 â€‹± â€‹0.84 â€‹mm, respectively. The absolute angle errors between the actual postoperative angles and the preoperative planned angles of the lower limb alignment angles, coronal femoral component angles, and coronal tibial component angles were 1.46° â€‹± â€‹0.95°, 1.13° â€‹± â€‹1.01°, and 1.05° â€‹± â€‹0.73°, respectively. Besides, 100% of the absolute error of the HKA angles was within 3°. In addition, compared to the preoperative lower limb alignment angle, 90.32% of the postoperative lower limb alignment angles of 31 patients were closer to 180° after the operation. All 31 patients underwent a successful surgery, and no relevant complications occurred after the operation, such as surgical site infection, deep venous thrombosis, or vascular and nerve injury. CONCLUSION: The "Skywalker" system has good osteotomy accuracy, can achieve the planned angles well, and is expected to assist surgeons in performing accurate bone cuts and reconstructing planned lower limb alignments in the relevant clinical applications in future.

Three-dimensional printing-based personalized limb salvage and reconstruction treatment of pelvic tumors.

BACKGROUND AND OBJECTIVES: The treatment of pelvic tumors is widely recognized to be challenging. The purpose of this study was to evaluate the efficacy of personalized three-dimensional (3D) printing-based limb salvage and reconstruction treatment for pelvic tumors. METHODS: Twenty-eight pelvic tumor patients were enrolled. 3D printing lesion models and osteotomy templates were prepared for surgery planning, prosthesis design, and osteotomy assistance during surgery. 3D printing-based personalized pelvic prostheses were manufactured and used in all 28 patients. Follow-up of postoperative survival, prosthesis survival, imaging examinations, and Musculoskeletal Tumor Society (MSTS) lower limb functional scores were carried out. RESULTS: The mean follow-up period was 32.2 months, during which 16 patients had disease-free survival, 3 survived with the disease, and 9 died. The prostheses were stable, and the mean offset of the center of rotation was 5.48 mm. The prosthesis-bone interface showed good integration. For the 19 surviving patients, the mean MSTS lower limb functional score was 23.2. Postoperative complications included superficial infection in six patients and hip dislocation in three patients. CONCLUSIONS: Personalized 3D printing-based limb salvage and reconstruction was an effective treatment for pelvic tumors. Our patients achieved good early postoperative efficacy and functional recovery.

A novel and efficient surgical knotting technique for high-tension closures.

BACKGROUND: The closure of high-tension incisions without any assistance can be difficult and challenging for surgeons. A common practice is to fix the first knot with a clamp and then tie a reverse locking knot; however, this practice has certain disadvantages. The aim of this study was to introduce a novel and efficient surgical knotting technique with various advantages. METHODS: The two knotting methods used in this study were the absorbable braided suture where the first suture was fixed with a clamp (with assistance) and the SH-9Hospital knotting technique (without assistance) applied on the smooth surface of a cylinder. Mechanical testing was performed using a universal material testing machine. The load-elongation curve and ultimate tensile load (UTL) were recorded. RESULTS: The mean knotting time was 36.40±1.50 s (range, 32-41 s) and 24.80±1.16 s (range, 21-28 s) in the clamp and SH-9Hosptial groups, respectively. The mean UTL was 120.8±10.14 N (range, 81.11-136.55 N)and 126.5±6.29 N (range, 104.88-139.56 N) in the clamp and SH-9Hospital groups, respectively. The knot strength of the SH-9Hospital technique was not inferior to traditional clinical practice. CONCLUSIONS: The SH-9Hospital knotting technique was a secure, convenient, and efficient method for high-tension closure.