RESUMO
The integration of compact high-bandwidth III-V active devices in a scalable manner is highly significant for Silicon-on-insulator (SOI) photonic integrated circuits. To address this, we demonstrate the integration of pre-fabricated 21 × 57 µm2 InGaAs photodetector (PD) coupons with a thickness of 675â nm to a 500â nm SOI platform using a direct bonding micro-transfer printing process. The common devices are coupled to the Si waveguides via butt, grating and evanescent coupling schemes with responsivities of 0.13, 0.3 and 0.6 A/W respectively, in line with simulations. The thin device facilitates simplified high-speed connections without the need for an interlayer dielectric. A back-to-back data communication rate of 50 Gb/s is achieved with on-off keying and with post processing of four-level pulse-amplitude modulation (PAM4) 100 Gb/s is realized. Potentially, around 1 million devices per 75 mm InP wafer can be attained. The integration of compact PDs exhibited in this work can be extended to modulators and lasers in the future.
RESUMO
Germanium (Ge) ion implantation into silicon waveguides will induce lattice defects in the silicon, which can eventually change the crystal silicon into amorphous silicon and increase the refractive index from 3.48 to 3.96. A subsequent annealing process, either by using an external laser or integrated thermal heaters can partially or completely remove those lattice defects and gradually change the amorphous silicon back into the crystalline form and, therefore, reduce the material's refractive index. Utilising this change in optical properties, we successfully demonstrated various erasable photonic devices. Those devices can be used to implement a flexible and commercially viable wafer-scale testing method for a silicon photonics fabrication line, which is a key technology to reduce the cost and increase the yield in production. In addition, Ge ion implantation and annealing are also demonstrated to enable post-fabrication trimming of ring resonators and Mach-Zehnder interferometers and to implement nonvolatile programmable photonic circuits.
RESUMO
The next generation of silicon-based photonic processors and neural and quantum networks need to be adaptable, reconfigurable, and programmable. Phase change technology offers proven nonvolatile electronic programmability; however, the materials used to date have shown prohibitively high optical losses, which are incompatible with integrated photonic platforms. Here, we demonstrate the capability of the previously unexplored material Sb2Se3 for ultralow-loss programmable silicon photonics. The favorable combination of large refractive index contrast and ultralow losses seen in Sb2Se3 facilitates an unprecedented optical phase control exceeding 10π radians in a Mach-Zehnder interferometer. To demonstrate full control over the flow of light, we introduce nanophotonic digital patterning as a previously unexplored conceptual approach with a footprint orders of magnitude smaller than state-of-the-art interferometer meshes. Our approach enables a wealth of possibilities in high-density reconfiguration of optical functionalities on silicon chip.
RESUMO
We demonstrate high-speed silicon modulators optimized for operating at the wavelength of 2 µm. The Mach-Zehnder interferometer (MZI) carrier-depletion modulator with 2 mm phase shifter has a single-arm modulation efficiency (Vπ ·Lπ) of 2.89 V·cm at 4 V reverse bias. Using a push-pull configuration it operates at a data rate of 25 Gbit/s OOK with an extinction ratio of 6.25 dB. We also proposed a mathematically-analysed streamlined IMDD PAM-4 scheme and successfully demonstrated a 25 Gbit/s datarate PAM-4 with the same 2 mm modulator. A Michelson interferometer carrier-depletion modulator with 0.5 mm phase shift length has also been shown with modulation efficiency (Vπ ·Lπ) of 1.36 V·cm at 4 V reverse bias and data rate of 20 Gbit/s OOK. The Michelson interferometer modulator performs similarly to a Mach-Zehnder modulator with twice the phase shifter length.
RESUMO
Surface-exposed uniformly doped silicon-on-insulator channels are fabricated to evaluate the accuracy of Kelvin Probe Force Microscopy (KPFM) measured surface potential and reveals the role of surface charge on the exposed channel operated in the ambient environment. First, the quality of the potential profile probed in the vacuum environment is assessed by the consistency of converted resistivity from KPFM result to the resistivity extracted by the other three methods. Second, in contrast to the simulated and vacuum surface potential profile and image, the ambient surface potential is bent excessively at the terminals of the channel. The excessive bending can be explained by the movement of surface charge under the drive of geometry induced strong local electric field from the channel and results in non-uniform distribution. The dynamic movement of surface charges is proved by the observation of time-dependent potential drift in the ambient measurement. The result suggests the surface charge effect should be taken into account of the measurement of the surface potential in the ambient environment and the design of charge sensitive devices whose surfaces are exposed to air or in ambient conditions in their operation.
RESUMO
We propose and experimentally demonstrate an apodized bidirectional grating coupler for high-efficiency, perfectly vertical coupling. Through grating apodization, the coupling efficiency (CE) can be notably improved, and the parasitic reflections can be minimized. For ease of fabrication, subwavelength gratings are introduced, which are also beneficial for the coupling performance. Simulation shows a record CE of 72%. We found that the coupler is quite robust to the variation of incidence mode field diameter and fiber misalignment. A CE of -1.8 dB is experimentally measured with a 1-dB bandwidth of 37 nm.
RESUMO
An optical device configuration allowing efficient electrical tuning of near total optical absorption in monolayer graphene is reported. This is achieved by combining a two-dimensional gold coated diffraction grating with a transparent spacer and a suspended graphene layer to form a doubly resonant plasmonic structure. Electrical tuneability is achieved with the inclusion of an ionic gel layer which plays the role of the gate dielectric. The underlying grating comprises a 2-dimensional array of inverted pyramids with a triple layer coating consisting of a reflective gold layer and two transparent dielectric spacers, also forming a vertical micro-cavity known as a Salisbury screen. Resonant coupling of plasmons between the gold grating and graphene result in strong enhancement of plasmon excitations in the atomic monolayer. Plasmon excitations can be dynamically switched off by lowering the chemical potential of graphene. Very high absorption values for an atomic monolayer and large tuning range, extremely large electrostatically induced changes in absorption over very small shifts in chemical potential are possible thus allowing for very sharp transitions in the optical behavior of the device. Overall this leads to the possibility of making electrically tunable plasmonic switches and optical memory elements by exploiting slow modes.
RESUMO
A controllable transformation from interfacial to filamentary switching mode is presented on a ZrO2/ZrO2 - x /ZrO2 tri-layer resistive memory. The two switching modes are investigated with possible switching and transformation mechanisms proposed. Resistivity modulation of the ZrO2 - x layer is proposed to be responsible for the switching in the interfacial switching mode through injecting/retracting of oxygen ions. The switching is compliance-free due to the intrinsic series resistor by the filaments formed in the ZrO2 layers. By tuning the RESET voltages, controllable and stable multistate memory can be achieved which clearly points towards the capability of developing the next-generation multistate high-performance memory.