RESUMO
Pulse rate variability is a physiological parameter that has been extensively studied and correlated with many physical ailments. However, the phase relationship between inter-beat interval, IBI, and breathing has very rarely been studied. Develop a technique by which the phase relationship between IBI and breathing can be accurately and efficiently extracted from photoplethysmography (PPG) data. A program based on Lock-in Amplifier technology was written in Python to implement a novel technique, Dynamic Phase Extraction. It was tested using a breath pacer and a PPG sensor on 6 subjects who followed a breath pacer at varied breathing rates. The data were then analyzed using both traditional methods and the novel technique (Dynamic Phase Extraction) utilizing a breath pacer. Pulse data was extracted using a PPG sensor. Dynamic Phase Extraction (DPE) gave the magnitudes of the variation in IBI associated with breathing [Formula: see text] measured with photoplethysmography during paced breathing (with premature ventricular contractions, abnormal arrhythmias, and other artifacts edited out). [Formula: see text] correlated well with two standard measures of pulse rate variability: the Standard Deviation of the inter-beat interval (SDNN) (ρ = 0.911) and with the integrated value of the Power Spectral Density between 0.04 and 0.15 Hz (Low Frequency Power or LF Power) (ρ = 0.885). These correlations were comparable to the correlation between the SDNN and the LF Power (ρ = 0.877). In addition to the magnitude [Formula: see text], Dynamic Phase Extraction also gave the phase between the breath pacer and the changes in the inter-beat interval (IBI) due to respiratory sinus arrythmia (RSA), and correlated well with the phase extracted using a Fourier transform (ρ = 0.857). Dynamic Phase Extraction can extract both the phase between the breath pacer and the changes in IBI due to the respiratory sinus arrhythmia component of pulse rate variability ([Formula: see text], but is limited by needing a breath pacer.
Assuntos
Arritmia Sinusal Respiratória , Processamento de Sinais Assistido por Computador , Eletrocardiografia , Frequência Cardíaca/fisiologia , Humanos , Fotopletismografia/métodos , Taxa RespiratóriaRESUMO
The bone material strength index (BMSi), as measured by the OsteoProbe, is significantly correlated with Vickers hardness and Rockwell (RW) hardness measurements on conventional materials. The Vickers and RW measurements were carried out according to American Society for Testing and Materials standard test methods, and OsteoProbe measurements followed published standardized testing methods. The correlations between the BMSi and RW hardness, r = 0.93, and between the BMSi and Vickers hardness, r = 0.94, are comparable with the correlation between RW and Vickers hardness, r = 0.87. The correlation between the BMSi and RW is significant at p < 0.01, and the correlation between the BMSi and Vickers hardness is significant at p < 0.01. These results show that the indentation measurement performed by the OsteoProbe may be considered as a type of hardness measurement comparable to widely used conventional methods, with specific applications targeted by its portable and narrow design.
Assuntos
Materiais Biocompatíveis , Osso e Ossos , Teste de Materiais/instrumentação , Fenômenos Mecânicos , DurezaRESUMO
Hydration directly affects the mechanical properties of bone. An initial and basic procedure shows both wedge indentation fracture experiments under plane strain conditions in cortical bone and numerical simulation with finite elements agree that dry bone fractures much more easily than fully hydrated bone submerged in an aqueous environment, such as in the body of an animal. The wedge indentation experiments were performed with high speed video microscopy, under dry and fully hydrated (submerged) conditions. The numerical simulation, specifically finite element analysis using cohesive elements to simulate fracture, was utilized to capture plasticity, fracture initiation and propagation, and to study the applicability of brittle material based indentation fracture theory. Experiment and theory give similar results for the dependence of depth of fracture initiation, and size of plastic zone, on hydration state. Comparison of fracture propagation characteristics between wet and dry bone are examined and discussed. This research demonstrates the ability to quantitatively assess the effect of hydration on the fracture initiation, propagation, and plastic zone size of cortical bone, through an approach using simple wedge indentation, with important implications for efforts in developing methods to understand clinical diagnostic testing and general fracture behavior of living bone in the ultimate interest of health care purposes.
Assuntos
Osso Cortical/patologia , Fraturas Ósseas , Animais , Fenômenos Biomecânicos , Bovinos , Análise de Elementos Finitos , Estresse MecânicoRESUMO
OBJECTIVE: To compare results obtained with a handheld reference point indentation instrument for bone material strength index (BMSi) measurements in the equine third metacarpal bone for various testing conditions. SAMPLE: 24 third metacarpal bones. PROCEDURES: Third metacarpal bones from both forelimbs of 12 horses were obtained. The dorsal surface of each bone was divided into 6 testing regions. In vivo and ex vivo measurements of BMSi were obtained through the skin and on exposed bone, respectively, to determine effects of each testing condition. Difference plots were used to assess agreement between BMSi obtained for various conditions. Linear regression analysis was used to assess effects of age, sex, and body weight on BMSi. A mixed-model ANOVA was used to assess effects of age, sex, limb, bone region, and testing condition on BMSi values. RESULTS: Indentation measurements were performed on standing sedated and recumbent anesthetized horses and on cadaveric bone. Regional differences in BMSi values were detected in adult horses. A significant linear relationship (r(2) = 0.71) was found between body weight and BMSi values. There was no difference between in vivo and ex vivo BMSi values. A small constant bias was detected between BMSi obtained through the skin, compared with values obtained directly on bone. CONCLUSIONS AND CLINICAL RELEVANCE: Reference point indentation can be used for in vivo assessment of the resistance of bone tissue to microfracture in horses. Testing through the skin should account for a small constant bias, compared with results for testing directly on exposed bone.
Assuntos
Densidade Óssea/fisiologia , Cavalos , Teste de Materiais/veterinária , Animais , Fenômenos Biomecânicos , Cadáver , Teste de Materiais/instrumentação , Teste de Materiais/métodos , Ossos Metacarpais , Estresse MecânicoRESUMO
In an attempt to study the mechanical behavior of bone under indentation, methods of analyses and experimental validations have been developed, with a selected test material. The test material chosen is from an equine cortical bone. Stress-strain relationships are first obtained from conventional mechanical property tests. A finite element simulation procedure is developed for indentation analyses. The simulation results are experimentally validated by determining (1) the maximum depth of indentation with a single cycle type of reference point indentation, and (2) the profile and depth of the unloaded, permanent indentation with atomic force microscopy. The advantage of incorporating in the simulation a yield criterion calibrated by tested mechanical properties, with different values in tension and compression, is demonstrated. In addition, the benefit of including damage through a reduction in Young's modulus is shown in predicting the permanent indentation after unloading and recovery. The expected differences in response between two indenter tips with different sharpness are predicted and experimentally observed. Results show predicted indentation depths agree with experimental data. Thus, finite element simulation methods with experimental validation, and with damage approximation by a reduction of Young's modulus, may provide a good approach for analysis of indentation of cortical bone. These methods reveal that multiple factors affect measured indentation depth and that the shape of the permanent indentation contains useful information about bone material properties. Only further work can determine if these methods or extensions to these methods can give useful insights into bone pathology, for example the bone fragility of thoroughbred racehorses.
Assuntos
Análise de Elementos Finitos , Cavalos , Teste de Materiais/métodos , Fenômenos Mecânicos , Ossos Metacarpais , Animais , Fenômenos Biomecânicos , Teste de Materiais/instrumentação , Estresse MecânicoRESUMO
A novel, hand-held Reference Point Indentation (RPI) instrument, measures how well the bone of living patients and large animals resists indentation. The results presented here are reported in terms of Bone Material Strength, which is a normalized measure of how well the bone resists indentation, and is inversely related to the indentation distance into the bone. We present examples of the instrument's use in: (1) laboratory experiments on bone, including experiments through a layer of soft tissue, (2) three human clinical trials, two ongoing in Barcelona and at the Mayo Clinic, and one completed in Portland, OR, and (3) two ongoing horse clinical trials, one at Purdue University and another at Alamo Pintado Stables in California. The instrument is capable of measuring consistent values when testing through soft tissue such as skin and periosteum, and does so handheld, an improvement over previous Reference Point Indentation instruments. Measurements conducted on horses showed reproducible results when testing the horse through tissue or on bare bone. In the human clinical trials, reasonable and consistent values were obtained, suggesting the Osteoprobe® is capable of measuring Bone Material Strength in vivo, but larger studies are needed to determine the efficacy of the instrument's use in medical diagnosis.
RESUMO
The active control device properties including the three gain coefficients for the actuator are derived in the same manner. The stability of the proposed algorithm is also discussed using the Routh-Hurwitz criterion. Simulations are perfomed to evaluate the perfomance of the present ATMD design on a ten-story three-bay building frame. Also, the feasibility of using TMD and ATMD systems in a flexible cable-stayed bridge is currently under investigation.(AU)