Facet Engineering Boosts Interfacial Compatibility of Inorganic-Polymer Composites.

The interfacial compatibility between inorganic particles and polymer is crucial for ensuring high performance of composites. Current efforts to improve interfacial compatibility preferentially rely on organic modification of inorganic particles, leading to their complex process, high costs, and short lifespans due to aging and decomposition of organic modifiers. However, the fabrication of inorganic particles free from organic modification that is highly compatible in polymer still remains a great challenge. Herein, a novel facet-engineered inorganic particle that exhibit high compatibility with widely used polymer interface without organic modification is reported. Theoretical calculations and experimental results show that (020) and (102) facets of inorganic particles modulate local coordination environment of Ca atoms, which in turn regulate d-orbital electron density of Ca atoms and electron transfer paths at interfaces between polymer and inorganic particles. This difference alters the molecular diffusion, orientation of molecular chains on surface of inorganic particles, further modulating interfacial compatibility of composites. Surprisingly, the facet-engineered inorganic particles show exceptional mechanical properties, especially for tensile strain at break, which increases by 395%, far superior to state-of-the-art composites counterparts. Thus, the method can offer a more benign approach to the general production of high-performance and low-cost polymer-inorganic composites for diverse potential applications.

Interface Structure Strengthening of a Mesoporous Silicon/Expanded Perlite Microevaporator for Efficient Solar-Driven Interfacial Evaporation.

Solar-driven interfacial evaporation is one of the cutting-edge technologies for seawater desalination and wastewater purification. Herein, a floating carbon-coated silica microsphere/expanded perlite integrated interfacial microevaporator (HEPCL) is reported. The carbon nanolayer allows the HEPCL to have better broadband light absorption performance than natural graphite and graphene oxide. Through the low density of expanded perlite, HEPCL particles can self-float on the water surface and self-aggregate into an integrated whole under surface tension, which enhances the heat collection capacity. The hierarchical porous structure of the HEPCL has a continuous water absorption capacity. Notably, water molecules adsorbed in the HEPCL have a high desorption energy, which reduces the water evaporation enthalpy (1621 kJ/kg), making it easy to remove with external energy. Thanks to the design merits, the HEPCL achieves a water evaporation rate of 1.551 kg m-2 h-1 (efficiency of 94.85%) under 1 sun irradiation and may inspire a practicable solution of water scarcity.

Separators Modified with Ultrathin Montmorillonite/Polymer Nanocoatings Achieve Dendrite-Free Lithium Deposition at High Current Densities.

Fatal dendritic growth in lithium metal batteries is closely related to the composition and thickness of the modified separator. Herein, an ultrathin nanocoating composed of monolayer montmorillonite (MMT), poly(vinyl alcohol) (PVA) on a polypropylene separator is prepared. The MMT was exfoliated into monolayers (only 0.96 nm) by intercalating PVA under ultrasound, followed by cross-linking with glutaraldehyde. The thickness of the nanocoating on the polypropylene separator, as determined using the pull-up method, is only 200-500 nm with excellent properties. As a result, the lithium-symmetric battery composed of it has a low overpotential (only 40 mV) and a long lifespan of more than 7900 h at high current density, because ion transport is unimpeded and Li+ flows uniformly through the ordered ion channels between the MMT layers. Additionally, the separator exhibited excellent cycling stability in Li-S batteries. This study offers a new idea for fabricating ultrathin clay/polymer modified separators for metal anode stable cycling at high current densities.

Advanced gene therapy system for the treatment of solid tumour: A review.

In contrast to conventional therapies that require repeated dosing, gene therapy can treat diseases by correcting defective genes after a single transfection and achieving cascade amplification, and has been widely studied in clinical settings. However, nucleic acid drugs are prone to catabolism and inactivation. A variety of nucleic acid drug vectors have been developed to protect the target gene against nuclease degradation and increase the transformation efficiency and safety of gene therapy. In addition, gene therapy is often combined with chemotherapy, phototherapy, magnetic therapy, ultrasound, and other therapeutic modalities to improve the therapeutic effect. This review systematically introduces ribonucleic acid (RNA) interference technology, antisense oligonucleotides, and clustered regularly interspaced short palindromic repeat/CRISPR-associated nuclease 9 (CRISPR/Cas9) genome editing. It also introduces the commonly used nucleic acid drug vectors, including viral vectors (adenovirus, retrovirus, etc.), organic vectors (lipids, polymers, etc.), and inorganic vectors (MOFs, carbon nanotubes, mesoporous silica, etc.). Then, we describe the combined gene therapy modalities and the pathways of action and report the recent applications in solid tumors of the combined gene therapy. Finally, the challenges of gene therapy in solid tumor treatment are introduced, and the prospect of application in this field is presented.

In Situ Evolution of Ionic Sites at Clay Mineral Interfaces Facilitates Fluoride and Phosphorus Mineralization.

Soil minerals influence the biogeochemical cycles of fluoride (F) and phosphorus (P), impacting soil quality and bioavailability to plants. However, the cooperative mechanisms of soil minerals in governing F and P in the soil environment remain a grand challenge. Here, we reveal the essential role of a typical soil mineral, montmorillonite (Mt), in the cycling and fate of F and P. The results show that the enrichment of metal sites on the Mt surface promotes the mineralization of F to the fluorapatite (FAP) phase, thereby remaining stable in the environment, simultaneously promoting P release. This differential behavior leads to a reduction in the level of F pollution and an enhancement of P availability. Moreover, solid-state NMR and HRTEM observations confirm the existence of metastable F-Ca-F intermediates, emphasizing the pivotal role of Mt surface sites in regulating crystallization pathways and crystal growth of FAP. Furthermore, the in situ atomic force microscopy and theoretical calculations reveal molecular fractionation mechanisms and adsorption processes. It is observed that a competitive relationship exists between F and P at the Mt interface, highlighting the thermodynamically advantageous pathway of forming metastable intermediates, thereby governing the activity of F and P in the soil environment at a molecular level. This work paves the way to reveal the important role of clay minerals as a mineralization matrix for soil quality management and offers new strategies for modulating F and P dynamics in soil ecosystems.

Adjusted MnO oxygen vacancy for highly selective ORR production of H2O2.

The oxygen reduction reaction (ORR) via the two-electron pathway is an important method of hydrogen peroxide (H2O2) production. This study demonstrates that MnO with different oxygen vacancies possesses great 2e- ORR activity. The H2O2 selectivity increased from 10% to 93% with increasing oxygen vacancy concentration by adjusting the reaction temperature and time. Moreover, the H2O2 yield of the optimal MnO reached 544.1 mmol g-1 h-1, and it showed extraordinary stability over a long period of time (10 000 circles CV), surpassing most of the reported transition metal catalysts. This provides a new strategy for efficient and low-cost electrochemical production of H2O2.

Recent Progress on the Adsorption of Heavy Metal Ions Pb(II) and Cu(II) from Wastewater.

With the processes of industrialization and urbanization, heavy metal ion pollution has become a thorny problem in water systems. Among the various technologies developed for the removal of heavy metal ions, the adsorption method is widely studied by researchers and various nanomaterials with good adsorption performances have been prepared during the past decades. In this paper, a variety of novel nanomaterials with excellent adsorption performances for Pb(II) and Cu(II) reported in recent years are reviewed, such as carbon-based materials, clay mineral materials, zero-valent iron and their derivatives, MOFs, nanocomposites, etc. The novel nanomaterials with extremely high adsorption capacity, selectivity and particular nanostructures are summarized and introduced, along with their advantages and disadvantages. And, some future research priorities for the treatment of wastewater are also prospected.

Kaolinite-mediated synthesis of ultra-small silver nanoparticles with high antimicrobial activity.

Ultra-small Ag nanoparticles (<5 nm) loaded on a kaolinite surface were successfully prepared in large batches by a dry-process, displaying excellent broad-spectrum antimicrobial ability and size-dependent activity. This Ag-loaded kaolinite (Ag@AT/K) inhibited the growth of pathogenic bacteria and accelerated wound healing in in vivo experiments on MRSA-infected wounds. This work provides a new strategy for the preparation of mineral-based nanoscale antibacterial materials.

Bioclay Enzyme with Bimetal Synergistic Sterilization and Infectious Wound Regeneration.

Bacteria invasion is the main factor hindering the wound-healing process. However, current antibacterial therapies inevitably face complex challenges, such as the abuse of antibiotics or severe inflammation during treatment. Here, a drug-free bioclay enzyme (Bio-Clayzyme) consisting of Fe2+-tannic acid (TA) network-coated kaolinite nanoclay and glucose oxidase (GOx) was reported to destroy harmful bacteria via bimetal antibacterial therapy. At the wound site, Bio-Clayzyme was found to enhance the generation of toxic hydroxyl radicals for sterilization via cascade catalysis of GOx and Fe2+-mediated peroxidase mimetic activity. Specifically, the acidic characteristics of the infection microenvironment accelerated the release of Al3+ from kaolinite, which further led to bacterial membrane damage and amplified the antibacterial toxicity of Fe2+. Besides, Bio-Clayzyme also performed hemostasis and anti-inflammatory functions inherited from Kaol and TA. By the combination of hemostasis and anti-inflammatory and bimetal synergistic sterilization, Bio-Clayzyme achieves efficient healing of infected wounds, providing a revolutionary approach for infectious wound regeneration.

Interface Binding Mechanism of Nanoclay Hybridized Coacervate Microdroplets for the Controllable Construction of Protocells.

Coacervate microdroplets, a protocell model in exploring the origin of life, have gained significant attention. Clay minerals, catalysts during the origin of life, are crucial in the chemical evolution of small molecules into biopolymers. However, our understanding of the relationship between clay minerals and the formation and evolution of protocells on early Earth remains limited. In this work, the nanoclay montmorillonite nanosheet (MMT-Na) was employed to investigate its interaction with coacervate microdroplets formed by oligolysine (K10) and adenine nucleoside triphosphate (ATP). As an anionic component, MMT-Na was noted to promote the formation of coacervate microdroplets. Furthermore, the efficiency of ssDNA enrichment and the degree of ssDNA hybridization within these microdroplets were significantly improved. By combining inorganic nanoclay with organic biopolymers, our work provides an efficient way to enrich genetic biomolecules in the primitive Earth environment and builds a nanoclay-based coacervate microdroplets, shedding new light on life's origin and protocell evolution.

Halloysite-derived mesoporous silica with high ionic conductivity improves Li-S battery performance.

The slow Li+ transport rate in the thick sulfur cathode of the Li-S battery affects its capacity and cycling performance. Herein, Fe-doped highly ordered mesoporous silica material (Fe-HSBA-15) as a sulfur carrier of the Li-S battery shows high ion conductivity (1.10 mS cm-1) and Li+ transference number (0.77). The Fe-HSBA-15/S cell has an initial capacity of up to 1216.7 mA h g-1 at 0.2C and good stability. Impressively, at a high sulfur load of 4.34 mg cm-2, the Fe-HSBA-15/S cell still maintains an area specific capacity of 4.47 mA h cm-2 after 100 cycles. This is because Fe-HSBA-15 improves the Li+ diffusion behavior through the ordered mesoporous structure. Theoretical calculations also confirmed that the doping of iron enhances the adsorption of polysulfides, reduces the band gap and makes the catalytic activity stronger.

Facet-engineering strategy of phosphogypsum for production of mineral slow-release fertilizers with efficient nutrient fixation and delivery.

Phosphogypsum (PG) presents considerable potential for agricultural applications as a secondary primary resource. However, it currently lacks environmentally friendly, economically viable, efficient, and sustainable reuse protocols. This study firstly developed a PG-based mineral slow-release fertilizer (MSRFs) by internalization and fixation of urea within the PG lattice via facet-engineering strategy. The molecular dynamics simulations demonstrated that the binding energy of urea to the (041) facet of PG surpassed that of the (021) and (020) facets, with urea's desorption energy on the (041) facet notably higher than on the (021) and (020) facets. Guided by these calculations, we selectively exposed the (041) dominant facet of PG, and then achieving complete urea fixation within the PG lattice to form urea-PG (UPG). UPG exhibited a remarkable 48-fold extension in N release longevity in solution and a 45.77% increase in N use efficiency by plants compared to conventional urea. The facet-engineering of PG enhances the internalization and fixation efficiency of urea for slow N delivery, thereby promoting nutrient uptake for plant growth. Furthermore, we elucidated the intricate interplay between urea and PG at the molecular level, revealing the involvement of hydrogen and ionic bonding. This specific bonding structure imparts exceptional thermal stability and water resistance to the urea within UPG under environmental conditions. This study has the potential to provide insights into the high-value utilization of PG and present innovative ideas for designing efficient MSRFs.

Roles of Oxygen-Containing Functional Groups in Carbon for Electrocatalytic Two-Electron Oxygen Reduction Reaction.

Recent years have witnessed great research interests in developing high-performance electrocatalysts for the two-electron (2e-) oxygen reduction reaction (ORR) that enables the sustainable and flexible synthesis of H2O2. Carbon-based electrocatalysts exhibit attractive catalytic performance for the 2e- ORR, where oxygen-containing functional groups (OFGs) play a decisive role. However, current understanding is far from adequate, and the contribution of OFGs to the catalytic performance remains controversial. Therefore, a critical overview on OFGs in carbon-based electrocatalysts toward the 2e- ORR is highly desirable. Herein, we go over the methods for constructing OFGs in carbon including chemical oxidation, electrochemical oxidation, and precursor inheritance. Then we review the roles of OFGs in activating carbon toward the 2e- ORR, focusing on the intrinsic activity of different OFGs and the interplay between OFGs and metal species or defects. At last, we discuss the reasons for inconsistencies among different studies, and personal perspectives on the future development in this field are provided. The results provide insights into the origin of high catalytic activity and selectivity of carbon-based electrocatalysts toward the 2e- ORR and would provide theoretical foundations for the future development in this field.

Enhanced Adsorption of Trace Ethylene on Ag/NZ5 Modified with Ammonia: Hierarchical Structure and Metal Dispersion Effects.

Trace ethylene poses a significant challenge during the storage and transportation of agricultural products, causing over-ripening, reducing shelf life, and leading to food waste. Zeolite-supported silver adsorbents show promise for efficiently removing trace ethylene. Herein, hierarchical Ag/NZ5(X) adsorbents were prepared via different ammonia modifications, which featured enhanced ethylene adsorption ability. Ag/NZ5(2.5) exhibited the largest capacity and achieved near-complete removal at room temperature with prolonged efficacy. Characterization results indicated that the ammonia modification led to the formation of a hierarchical structure in the zeolite framework, reducing diffusion resistance and increasing the accessibility of the active sites. Additionally, desilication effects increased the defectiveness, generating a stronger metal-support interaction and resulting in a higher metal dispersion rate. These findings provide valuable insights into the development of efficient adsorbents for removing trace ethylene, thereby reducing food waste and extending the shelf life of agricultural products.

A Fe(III) intercalated clay nanoplatform for combined chemo/chemodynamic therapy.

A Fe(III) intercalated montmorillonite nanoplatform (Fe-MMT) was engineered for doxorubicin (DOX) loading. The constructed Fe-MMT/DOX nanoplatform could not only improve the production of H2O2 to enhance chemodynamic therapy but interfere with DNA damage repair to amplify the efficacy of DOX, proving an ideal combination of chemotherapy and chemodynamic therapy.

Tubular Nanoclay-Enhanced Calcium Phosphate Mineralization and Assembly to Impart High Stiffness and Antimicrobial Properties.

Achieving superior mechanical properties of composite materials in artificially engineered materials is a great challenge due to technical bottlenecks in the size and morphological modulation of inorganic nanominerals. Hence, a "bioprocess-inspired fabrication" is proposed to create multilayered organic-inorganic columnar structures. The sequential assembly of halloysite nanotubes (HNTs), polyelectrolytes (PAAs), and calcium phosphates (CaPs) results in organic-inorganic structures. PAA plays a crucial role in controlling the formation of CaP, guiding it into amorphous particles with smaller nanosizes. The introduction of HNT induces the assembly and maturation of CaP-PAA, leading to the formation of a highly crystalline hydroxyapatite. Poly(vinyl alcohol) was then woven into HNT-encapsulated hydroxyapatite nanorods, resulting in composite materials with basic hierarchical structures across multiple scales. The fabricated composite exhibits exceptional hardness (4.27 ± 0.33 GPa) and flexural strength (101.25 ± 1.72 MPa), surpassing those of most previously developed biological hard tissue materials. Additionally, the composite demonstrates effective antibacterial properties and corrosion resistance, attributed to the dense crystalline phase of CaP. This innovative approach showcases the potential of clay minerals, particularly HNT, in the advancement of biomaterial design. The outstanding mechanical and antimicrobial properties of clay-based composites make them a promising candidate for applications in hard tissue repair, offering versatility in biomedicine and engineering.

Efficient Adsorbent Derived from Phytolith-Rich Ore for Removal of Tetracycline in Wastewater.

In recent decades, the tetracycline (TC) concentration in aquatic ecosystems has gradually increased, leading to water pollution problems. Various mineral adsorbents for the removal of tetracyclines have garnered considerable attention. However, efficient adsorbents suitable for use in a wide pH range environment have rarely been reported. Herein, a phytolith-rich adsorbent (PRADS) was prepared by a simple one-step alkali-activated pyrolysis treatment using phytolith as a raw material for effectively removing TC. PRADS, benefiting from its porous structure, which consists of acid- and alkali-resistant, fast-adsorbing macroporous silica and mesoporous carbon, is highly desirable for efficient TC removal from wastewater. The results indicate that PRADS exhibited excellent adsorption performance and stability for TC over a wide pH range of 2.0-12.0 under the coexistence of competing ions, which could be attributed to the fact that PRADS has a porous structure and contains abundant oxygen-containing functional groups and a large number of bonding sites. The adsorption mechanisms of PRADS for TC were mainly attributed to pore filling, hydrogen bonding, π-π electron-donor-acceptor, and electrostatic interactions. This work could offer a novel preparation strategy for the effective adsorption of pollutants by new functionalized phytolith adsorbents.

Breaking through the pH Limitation of Fe1-xS Nanozymes Using Component-Modulated Coupled Nanoclay.

Overcoming the intrinsic low activity of most peroxidase mimics under neutral pH is crucial but still extremely challenging for the detection of disease markers in biological samples. Here, we chose nanoclay (i.e., montmorillonite K10, MK10) as a carrier to modulate the structure of Fe1-xS nanozyme components through an interfacial modulation strategy, aiming at breaking the neutral pH limitation of Fe1-xS. MK10 with abundant hydroxyl groups on its surface acts as a carrier to increase the ratio of Fe(II) and S(II-) content in surface Fe1-xS. We verify that Fe(II)-promoted surface hydroxyl radical generation and S(II-)-promoted regeneration of Fe(II) play key roles in endowing peroxidase-like activity to Fe1-xS at neutral pH. As expected, Fe1-xS/MK10 exhibited 11-fold higher Vmax and 52-fold higher catalytic efficiency than bare Fe1-xS. As a proof of concept, the sensor constructed based on Fe1-xS/MK10 achieved colorimetric detection of xanthine under neutral conditions with a linear range of 5-300 µM and a limit of detection of 2.49 µM. Finally, we achieved highly sensitive detection of xanthine in serum using the constructed biosensor. Our contribution is the novel use of a nanoclay-mediated interfacial modulation strategy for boosting the peroxidase-mimicking activity and breaking the pH limitation, which contributes to the in situ detection of disease markers by nanozymes under physiological conditions.

Research Note: Effect of fasting time on the fasting heat production, blood metabolites, and body components of layer-type pullets.

Fasting heat production (FHP) is used to assess the maintenance net energy requirement of animals. Herein, the FHP of layer-type pullets was estimated. In trial 1, 16 40-day-old Jingfen layer-type pullets were divided into 4 groups of 4 chickens and placed in 4 respiratory chambers. Pullets had free access to feed and water. After 4-d acclimatization, feed was withdrawn, and chickens were measured for FHP for 3 consecutive days. In trial 2, twenty-four 40-day-old pullets were placed in 4 respiratory calorimetry chambers, with 6 pullets per chamber. After 4-d acclimatization, one chamber was randomly selected and all pullets in the chamber was sampled at 5, 25, 50, or 65 h after feed withdrawal. The result showed that FHP declined with fasting time and reached the lowest level between 48 and 72 h. Respiratory quotient was decreased (P < 0.05) between 24 and 48 h compared with that in the first 24 h after fasting. The FHP in the light period showed a significant to decline with fasting time (P < 0.01), whereas the FHP in the dark period was decreased (P < 0.01) 24 h after fasting. Body weight, thigh mass, and abdominal fat decreased (P < 0.05) at 25 h after fasting. Serum glucose were increased (P < 0.01) and while triglycerides were significantly decreased (P < 0.01) at 50 h compared with that at 5 and 25 h time point. The result suggests that the adequate measuring period for FHP for layer-type pullets is from 24 to 48 h after fasting. The FHP of 7-wk-old layer-type pullets was 562.20 kJ/kg of BW0.75/d under a 10-h light and 14-h dark lighting regime.

Differential Adsorption of Dissolved Organic Matter and Phosphorus on Clay Mineral in Water-Sediment System.

Lake sediments connection to the biogeochemical cycling of phosphorus (P) and carbon (C) influences streamwater quality. However, it is unclear whether and how the type of sediment controls P and C cycling in water. Here, the adsorption behavior of montmorillonite (Mt) with different interlayer cations (Na+, Ca2+, or Fe3+) on dissolved organic matter (DOM) and P was investigated to understand the role of Mt in regulating the organic carbon-to-phosphate (OC/P) ratio within freshwater systems. The adsorption capacity of Fe-Mt for P was 3.2-fold higher than that of Ca-Mt, while it was 1/3 lower for DOM. This dissimilarity in adsorption led to an increased OC/P in Fe-Mt-dominated water and a decreased OC/P in Ca-Mt-dominated water. Moreover, an in situ atomic force microscope and high-resolution mass spectrometry revealed molecular fractionation mechanisms and adsorptive processes. It was observed that DOM inhibited the nucleation and crystallization processes of P on the Mt surface, and P affected the binding energy of DOM on Mt through competitive adsorption, thereby governing the interfacial P/DOM dynamics on Mt substrates at a molecular level. These findings have important implications for water quality management, by highlighting the role of clay minerals as nutrient sinks and providing new strategies for controlling P and C dynamics in freshwater systems.