Surface gold atoms determine peroxidase mimic activity in gold alloy nanoparticles.

The development of peroxidase mimic nanocatalysts is relevant for oxidation reactions in biosensing, environmental monitoring and green chemical processes. Several nanomaterials have been proposed as peroxidase mimic, the majority of which consists of noble metals and oxide nanoparticles (NPs). Yet, there is still limited information about how the change in the composition influences their catalytic activity. Here, the peroxidase mimic behaviour of gold NPs is compared to a traditional nanoalloy as Au-Ag and to the Au-Fe and the Au-Co nanoalloys, which were not tested before as oxidation catalysis. Since the alloys of gold with iron and cobalt are thermodynamically unstable, laser ablation in liquid (LAL) is exploited for the synthesis of these NPs. Using LAL, no chemical stabilizers or capping agents are present on the NPs surface, allowing the evaluation of the oxidation behaviour as a function of the alloy composition. The results point to the importance of surface gold atoms in the catalytic process, but also indicate the possibility of obtaining active nanocatalysts with a lower content of Au by alloying it with iron, which is earth-abundant, non-toxic and low cost. Overall, Au nanoalloys are worth consideration as a more sustainable alternative to pure Au nanocatalysts for oxidation reactions.

DFT study of the moiré pattern of FeO monolayer on Au(111).

Metal oxides are a class of material of particular interest for catalytic purposes. Among them the iron oxide as a monolayer supported on gold, FeO/Au, stands out for its capability to promote the CO oxidation and the dissociation of O2 and H2. In this work, we use density functional theory calculations to characterize interfacial properties of this heterostructure. We consider a FeO/Au realistic model system, managing to reproduce the moiré pattern experimentally found. Specific features of the high-symmetry domains of the moiré are identified, providing a robust ground for establishing a structure-activity relationship and guessing how the surface would behave in catalytic conditions. We also describe a strategy to model smaller systems representative of each high-symmetry domains of the moiré, which will be useful in the future to model catalytic reaction mechanisms.

Fe,Ni-Based Metal-Organic Frameworks Embedded in Nanoporous Nitrogen-Doped Graphene as a Highly Efficient Electrocatalyst for the Oxygen Evolution Reaction.

The quest for economically sustainable electrocatalysts to replace critical materials in anodes for the oxygen evolution reaction (OER) is a key goal in electrochemical conversion technologies, and, in this context, metal-organic frameworks (MOFs) offer great promise as alternative electroactive materials. In this study, a series of nanostructured electrocatalysts was successfully synthesized by growing tailored Ni-Fe-based MOFs on nitrogen-doped graphene, creating composite systems named MIL-NG-n. Their growth was tuned using a molecular modulator, revealing a non-trivial trend of the properties as a function of the modulator quantity. The most active material displayed an excellent OER performance characterized by a potential of 1.47 V (vs. RHE) to reach 10 mA cm-2, a low Tafel slope (42 mV dec-1), and a stability exceeding 18 h in 0.1 M KOH. This outstanding performance was attributed to the synergistic effect between the unique MOF architecture and N-doped graphene, enhancing the amount of active sites and the electron transfer. Compared to a simple mixture of MOFs and N-doped graphene or the deposition of Fe and Ni atoms on the N-doped graphene, these hybrid materials demonstrated a clearly superior OER performance.

Genomic and functional evaluation of exopolysaccharide produced by Liquorilactobacillus mali t6-52: technological implications.

BACKGROUND: This study explores the biosynthesis, characteristics, and functional properties of exopolysaccharide produced by the strain Liquorilactobacillus mali T6-52. The strain demonstrated significant EPS production with a non-ropy phenotype. RESULTS: The genomic analysis unveiled genes associated with EPS biosynthesis, shedding light on the mechanism behind EPS production. These genes suggest a robust EPS production mechanism, providing insights into the strain's adaptability and ecological niche. Chemical composition analysis identified the EPS as a homopolysaccharide primarily composed of glucose, confirming its dextran nature. Furthermore, it demonstrated notable functional properties, including antioxidant activity, fat absorption capacity, and emulsifying activity. Moreover, the EPS displayed promising cryoprotective activities, showing notable performance comparable to standard cryoprotective agents. The EPS concentration also demonstrated significant freeze-drying protective effects, presenting it as a potential alternative cryoprotectant for bacterial storage. CONCLUSIONS: The functional properties of L. mali T6-52 EPS reveal promising opportunities across various industrial domains. The strain's safety profile, antioxidant prowess, and exceptional cryoprotective and freeze-drying characteristics position it as an asset in food processing and pharmaceuticals.

Prediction of vascular complications in free flap reconstruction with machine learning.

OBJECTIVE: This study aims to explore the risk factors of vascular complications following free flap reconstruction and to develop a clinical auxiliary assessment tool for predicting vascular complications in patients undergoing free flap reconstruction leveraging machine learning methods. METHODS: We reviewed the medical data of patients who underwent free flap reconstruction at the Affiliated Hospital of Zunyi Medical University retrospectively from January 1, 2019, to December 31, 2021. Statistical analysis was used to screen risk factors. A training data set was generated and augmented using the synthetic minority oversampling technique. Logistic regression, random forest and neural network, models were trained, using this dataset. The performance of these three predictive models was then evaluated and compared using a test set, with four metrics, area under the receiver operating characteristic curve (AUC), accuracy, sensitivity, and specificity. RESULTS: A total of 570 patients who underwent free flap reconstruction were included in this study, 46 of whom developed postoperative vascular complications. Among the models tested, the neural network model exhibited superior performance on the test set, achieving an AUC of 0.828. Multivariate logistic regression analysis identified that preoperative hemoglobin levels, preoperative fibrinogen levels, operation duration, smoking history, the number of anastomoses, and peripheral vascular injury as statistically significant independent risk factors for vascular complications post-free flap reconstruction. The top five predictive factors in the neural network were fibrinogen content, operation duration, donor site, body mass index (BMI), and platelet count. CONCLUSION: Hemoglobin levels, fibrinogen levels, operation duration, smoking history, and anastomotic veins are independent risk factors for vascular complications following free flap reconstruction. These risk factors enhance the ability of machine learning models to predict the occurrence of vascular complications and identify high-risk patients. The neural network model outperformed the logistic regression and random forest models, suggesting its potential to aid clinicians in early identification of high-risk patients thereby mitigating patient suffering and improving prognosis.

Arterial chemotherapy for hepatocellular carcinoma in China: consensus recommendations.

Hepatocellular carcinoma (HCC) is one of the most common malignancies and the third leading cause of cancer-related deaths globally. Hepatic arterial infusion chemotherapy (HAIC) treatment is widely accepted as one of the alternative therapeutic modalities for HCC owing to its local control effect and low systemic toxicity. Nevertheless, although accumulating high-quality evidence has displayed the superior survival advantages of HAIC of oxaliplatin, fluorouracil, and leucovorin (HAIC-FOLFOX) compared with standard first-line treatment in different scenarios, the lack of standardization for HAIC procedure and remained controversy limited the proper and safe performance of HAIC treatment in HCC. Therefore, an expert consensus conference was held on March 2023 in Guangzhou, China to review current practices regarding HAIC treatment in patients with HCC and develop widely accepted statements and recommendations. In this article, the latest evidence of HAIC was systematically summarized and the final 22 expert recommendations were proposed, which incorporate the assessment of candidates for HAIC treatment, procedural technique details, therapeutic outcomes, the HAIC-related complications and corresponding treatments, and therapeutic scheme management.

Radioiodine-131-Labeled Theranostic Nanoparticles for Transarterial Radioembolization and Chemoembolization Combination Therapy of VX2 Liver Tumor.

In interventional treatment, materials are administered into the blood supply artery and directly delivered to tumors, offering proper scenarios for nanomedicine potential clinical applications. Transarterial chemoembolization (TACE) and transarterial radioembolization (TARE) are effective treatment methods for hepatocellular carcinoma (HCC), but postoperative residual tumor may result in intrahepatic recurrence and distant metastasis. The combination therapy of TACE and TARE based on multifunctional nanoparticles (NPs) is expected to overcome the drug resistance in hypoxic tumors and improve the therapeutic effect. Herein, BaGdF5 NPs are synthesized and then coated with polydopamine (PDA), conjugated with the chemotherapeutic drug cis-diamminedichloride platinum (CDDP), radio-labeled with therapeutic radionuclide 131 I, yielding 131 I-BaGdF5 @PDA-CDDP NPs. The in vitro anti-cancer effects of 131 I-BaGdF5 @PDA-CDDP NPs are confirmed using CCK-8 and γ-H2AX assays in Huh7 cells. Mixed with Lipiodol, 131 I-BaGdF5 @PDA-CDDP NPs are injected into the hepatic artery via a microcatheter to realize the TACE and TARE combination therapy in a rabbit VX2 liver tumor model. The results indicate that glucose metabolism is clearly decreased based on 18 F-FDG PET imaging and the apoptosis of tumor cells is increased. Furthermore, 131 I and BaGdF5 NPs can be used for SPECT imaging and CT/MR imaging respectively, facilitating real-time monitoring of the in vivo biodistribution of 131 I-BaGdF5 @PDA-CDDP NPs.

CT-Guided Percutaneous Cryoablation for Lung Metastasis of Colorectal Cancer: A Case Series.

PURPOSE: This study aimed to evaluate the efficacy of computed tomography (CT) guided percutaneous cryoablation (CA) for the management of lung metastases in patients with metastatic colorectal cancer (mCRC). METHODS: Retrospective analysis was performed on 38 mCRC patients with lung metastases, who underwent CT-guided percutaneous CA at our center from May 1, 2020 to November 1, 2021. The technical success rate, 1-year local control (LC) rate, recurrence-free survival (RFS) and treatment-related complications were analyzed. RESULTS: The CA procedure was successfully performed in all patients, with a technical success rate of 100%. The 1-year LC rate was 94.7% (36/38), while 16 patients experienced new distant lung metastases during the follow-up period. The median RFS was 20 months (95% CI: 13.0-27.0). The median RFS of patients with and without extrapulmonary metastasis was 15 and 23 months, respectively. Complications were reported in 18 (47.4%) patients following the CA procedure. Pneumothorax was discovered in 15 (39.5%) patients, and five of these patients (13.2%) required chest tube intubation. Two patients (5.3%) presented with hemoptysis during the CA procedure. One patient developed subcutaneous emphysema as detected in the post-procedure follow-up imaging. All patients tolerated the peri-procedural pain well under local anesthesia, and the mean visual analog scale (VAS) score was 2.8. CONCLUSION: Lung CA is a safe and well-tolerated treatment with a satisfactory local control rate for patients with lung metastases derived from mCRC.

Growth suppression of bacteria by biofilm deterioration using silver nanoparticles with magnetic doping.

Decades of antibiotic use and misuse have generated selective pressure toward the rise of antibiotic-resistant bacteria, which now contaminate our environment and pose a major threat to humanity. According to the evolutionary "Red queen theory", developing new antimicrobial technologies is both urgent and mandatory. While new antibiotics and antibacterial technologies have been developed, most fail to penetrate the biofilm that protects bacteria against external antimicrobial attacks. Hence, new antimicrobial formulations should combine toxicity for bacteria, biofilm permeation ability, biofilm deterioration capability, and tolerability by the organism without renouncing compatibility with a sustainable, low-cost, and scalable production route as well as an acceptable ecological impact after the ineluctable release of the antibacterial compound in the environment. Here, we report on the use of silver nanoparticles (NPs) doped with magnetic elements (Co and Fe) that allow standard silver antibacterial agents to perforate bacterial biofilms through magnetophoretic migration upon the application of an external magnetic field. The method has been proved to be effective in opening micrometric channels and reducing the thicknesses of models of biofilms containing bacteria such as Enterococcus faecalis, Enterobacter cloacae, and Bacillus subtilis. Besides, the NPs increase the membrane lipid peroxidation biomarkers through the formation of reactive oxygen species in E. faecalis, E. cloacae, B. subtilis, and Pseudomonas putida colonies. The NPs are produced using a one-step, scalable, and environmentally low-cost procedure based on laser ablation in a liquid, allowing easy transfer to real-world applications. The antibacterial effectiveness of these magnetic silver NPs may be further optimized by engineering the external magnetic fields and surface conjugation with specific functionalities for biofilm disruption or bactericidal effectiveness.

Research trends and areas of focus on cryoablation and oncology: A bibliometric analysis from 2001 to 2020.

BACKGROUND: Cryoablation is an interdisciplinary, widely used treatment approach for several types of solid tumors, making it difficult to obtain a comprehensive picture of its current status and popular research topics. This study aimed to use a bibliometric approach to understand important research themes and trends in cryoablation and oncology. METHODS: Literature studies on cryoablation and oncology from 2001 to 2020 were extracted from the Web of Science. A bibliometric analysis was performed based on the annual publication volume, several journal articles and local citation score, and distribution of keywords and trends in the literature using tools such as COOC version 9.94, VOSviewer version 1.6.17, and the bibliometrix version 3.1.3 R package. RESULTS: This study included 2793 publications. Total yearly publications have plateaued over the last 20 years. Five research themes were presented in the keyword network, including clinical applications of cryoablation in liver, lung, kidney, prostate, and skin cancers and comparison of cryoablation with other energy ablations. After 2012, 2 new research topics emerged: synergy between cryoablation and immunotherapy in tumors and cryoablation of Barrett esophagus. The high cited literatures are dominated by studies related to cryoablation for renal and prostate cancer treatment, but they also reflect the recent increasing interest in immunotherapy and bone metastases. Twenty important journals were identified, with Cryobiology publishing the most articles. CONCLUSION: Bibliometric analysis of studies related to tumor cryoablation can help researchers rapidly comprehend popular topics and determine future trends, guiding future research directions.

Evolution of the Properties and Composition of Heavy Oil by Injecting Dry Boiler Flue Gas.

As the increasing pressure to carbon peak and carbon neutral has brought carbon capture and storage (CCS) to the forefront as an emission mitigation tool, greater attention is being paid to the potential for injecting dry boiler flue gas (DBFG) into oil reservoirs. With the aim to directly inject DBFG with steam into heavy oil reservoirs, this study presents the results of a laboratory investigation of the effect of DBFG on the properties and composition of heavy oil by viscosity measurement, pressure-volume-temperature measurement, high-temperature and high-pressure experiment, and high-resolution mass spectrometry analysis. The results of the experiments show that adding 0.5 wt % particulate matter has no obvious influence on the viscosity of heavy oil. DBFG dissolved in heavy oil can reduce viscosity, increase the flow capability, and make the heavy oil volume swell. Heavy oil is oxidized with DBFG at 140 °C, which is mainly caused by the O2 in the DBFG, and the oxidation product is alcohol. The findings of the beneficial effect of DBFG on viscosity and swelling factor and the negligible negative effect of the small amount of nitrogen oxides, sulfides, and particulate matter in DBFG are very encouraging. It is expected that DBFG can be directly injected into heavy oil, not only for enhanced oil recovery (EOR) but also for reducing the emissions of greenhouse gases and pollutants, as well as for saving costs.

Endovascular Double-Layer Bare Stent Placement in the Treatment of Posttraumatic Pseudoaneurysm.

OBJECTIVE: To investigate the efficacy and safety of endovascular double-layer bare stent placement for the treatment of traumatic false aneurysm (TFA). METHODS: This is a retrospective review of five patients with TFA undergone double-layer bare stent placement in our center between February 2011 and August 2020. There are 2 males and 3 females aged 29-65 years, with an average age of 43 years. One case suffered from common carotid artery pseudoaneurysm, and four cases suffered superficial femoral artery pseudoaneurysm. RESULTS: The endovascular interventional treatment was successful in all 5 patients, and the pseudoaneurysms disappeared after treatment. No TFA recurrence and no complications such as instent stenosis, stent migration, stent fracture, endoleak, and infection were observed during the 3-99-month follow-up period. CONCLUSION: For the treatment of TFA, endovascular interventional therapy with double-layer bare stent was minimally invasive, safe, and effective with fewer complications. It could preserve all branches of parent artery and had the advantage of lower cost. It can be used in the treatment of TFA in selected cases. However, further clinical researches with larger cohorts are needed before its long-term efficacy can be completely clarified.

Reconstructing 3D digital model without distortion for poorly conductive porous rock by nanoprobe-assisted FIB-SEM tomography.

Oil and natural gas prospecting requires precise pore characterisation of insulating rock samples, which involves severe charging problems in the state-of-art FIB-SEM tomography, such as overexposure, drift and distortion. For weak cemented samples with very poor conductivity, the conventional ways such as decreasing accelerating voltage or current as well as coating a thin layer of carbon or gold fail to eliminate all the detrimental effect, leading to image distortion in the form of lateral shift and longitudinal stretching. A new nanoprobe-assisted method is explored in FIB-SEM tomography to address this problem and improve image quality. To be specific, a metallic nanoprobe is induced and attached on the sample surface to create an express path for the export of excess electrons near the region of interest, which effectively removes distortion and drift when imaging. Two adjacent areas were characterised and reconstructed into 3D digital models by FIB-SEM tomography with nanoprobe-assisted method applied to one region only. The lateral shift creates zigzag feature for distorted region and the longitudinal stretching of undistorted object can reach 14%. Average pore size of distorted region is larger than that of the undistorted region, however considering the longitudinal stretching, the average pore size of distorted region can be corrected to the same level as the undistorted region. The systematic error caused by distortion for poorly conductive porous rock is hazardous for digital rock physics analysis. Therefore, the nanoprobe-assisted FIB-SEM tomography should be regarded as a one of the optional and feasible procedures in case decreasing accelerating voltage or current as well as coating a thin layer of conductive material does not work.

Image distortion caused by charging problems influence quantitative analysis and simulation, which is more serious in FIB-SEM tomography. This study is used to correct image distortion and reconstruct 3D digital model for poorly conductive samples such as porous rock by nanoprobe-assisted method applied in FIB-SEM tomography. A metallic nanoprobe is induced and attached on the sample surface to removes distortion and drift when imaging. By comparing two adjacent areas with nanoprobe-assisted method applied for one region only, the degree of distortion and pore size distributions are analysed and computed. We observe and analyse lateral shift creates zigzag feature for distorted region and the longitudinal stretching of undistorted object. The average pore size of distorted region is higher than undistorted region, which can be corrected considering the longitudinal stretching. Such systematic error caused by distortion for poorly conductive porous rock is hazardous for not only digital rock physics analysis but also research of unconductive materials. Therefore, the nanoprobe-assisted FIB-SEM tomography should be regarded as a one of the optional and feasible procedures in case decreasing accelerating voltage or current as well as coating a thin layer of conductive material does not work.

Thiol-Branched Solid Polymer Electrolyte Featuring High Strength, Toughness, and Lithium Ionic Conductivity for Lithium-Metal Batteries.

Lithium-metal batteries (LMBs) with high energy densities are highly desirable for energy storage, but generally suffer from dendrite growth and side reactions in liquid electrolytes; thus the need for solid electrolytes with high mechanical strength, ionic conductivity, and compatible interface arises. Herein, a thiol-branched solid polymer electrolyte (SPE) is introduced featuring high Li+ conductivity (2.26 × 10-4 S cm-1 at room temperature) and good mechanical strength (9.4 MPa)/toughness (≈500%), thus unblocking the tradeoff between ionic conductivity and mechanical robustness in polymer electrolytes. The SPE (denoted as M-S-PEGDA) is fabricated by covalently cross-linking metal-organic frameworks (MOFs), tetrakis (3-mercaptopropionic acid) pentaerythritol (PETMP), and poly(ethylene glycol) diacrylate (PEGDA) via multiple CSC bonds. The SPE also exhibits a high electrochemical window (>5.4 V), low interfacial impedance (<550 Ω), and impressive Li+ transference number (tLi+ = 0.44). As a result, Li||Li symmetrical cells with the thiol-branched SPE displayed a high stability in a >1300 h cycling test. Moreover, a Li|M-S-PEGDA|LiFePO4 full cell demonstrates discharge capacity of 143.7 mAh g-1 and maintains 85.6% after 500 cycles at 0.5 C, displaying one of the most outstanding performances for SPEs to date.

Three-dimensional pore characterization of intact loess and compacted loess with micron scale computed tomography and mercury intrusion porosimetry.

The pore structure is one of the most important properties of soil, which can directly affect the other properties such as water content, permeability and strength. It is of great significance to study the soil pore structure for agricultural cultivation, water and soil conservation and engineering construction. This paper investigates the 3D pore characterization of intact loess and four kinds of compacted loess (with different dry density) in northwest China. Micro scale computed tomography and mercury intrusion porosimetry tests were performed to get the porosity, specific surface area, pore size distribution, connected pores content and isolated pores content of different samples. Results show that the intact loess has more connected pores than the compacted loess, and the compacted loess whose dry density appears to be modelled well still have different pore structure with the intact loess. In addition, as the compactness increasing, the large pores (>13 µm) were firstly broken into medium pores (8~13 µm) and some small pores (<8 µm) until the pore structure was close to the natural structure of the intact loess, after that medium pores began to be broken into small pores.

One-dimensional hollow FePt nanochains: applications in hydrolysis of NaBH4 and structural stability under Ga+ ion irradiation.

Pt-based one-dimensional hollow nanostructures are promising catalysts in fuel cells with excellent activity. Herein, one-dimensional hollow FePt nanochains were shown to be efficient nanocatalysts in the hydrolysis of NaBH4. The characterization of composition, structure and morphology identifies an ultrathin shell (∼3 nm) with uniformly distributed Fe30Pt70 constituents. The H2 generation rate of hollow Fe30Pt70 nanochains achieves 16.9 l/(min · g) at room temperature, while the activation energy is as low as 17.6 kJ mol-1 based on the fitting over the whole reaction time span. After the catalysis of NaBH4 hydrolysis, the morphology and composition of hollow FePt nanochains remain unchanged. Furthermore, the structural stability of hollow FePt nanochains under Ga+ ion irradiation is clarified. Theoretical simulation indicates that the stopping range of such a Fe30Pt70 shell is 7.7 keV, which offers a prediction that structure evolves diversely under Ga+ ions below and above such energy. The Ga+ ion irradiation experiments show a consistent trend with the simulation, where Ga+ ions with kinetic energy of 30 keV make the hollow architecture subside and sputter away, while Ga+ ions with kinetic energy of 5 keV only etch the top and lead to an eggshell structure.

Advances in the treatment of hepatocellular carcinoma using drug-eluting beads.

Hepatocellular carcinoma (HCC) is one of the most common types of malignant tumor. Although radical surgery and liver transplantation are possible cures for the disease, most patients are beyond the optimum stage for radical treatment at the time of diagnosis. Transarterial chemoembolization (TACE) is the first choice of treatment for advanced HCC. Owing to the widespread use of conventional TACE (cTACE), the problems with this treatment cannot be ignored. Drug-eluting beads (DEBs), a new type of embolization material, appear to overcome the problems of cTACE, and they have other advantages such as synchronous controlled continuous drug release after chemotherapy and embolization and low blood concentrations after treatment. This review summarizes the recent advances in the use of DEB-TACE to treat HCC.

Percutaneous cryoablation of subcapsular hepatocellular carcinoma: a retrospective study of 57 cases.

PURPOSE This study aims to evaluate the safety and effectiveness of the percutaneous cryoablation for subcapsular hepatocellular carcinoma (HCC). METHODS A total of 57 patients with subcapsular (<1 cm form the liver edge) HCCs (68 lesions), who were treated with CT-guided percutaneous cryoablation in the Department of Interventional Radiology of our hospital between July 1, 2016 and September 1, 2018, were retrospectively included. Complete ablation rate, local tumor progression (LTP) and treatment-related complications were evaluated. Furthermore, the degree of intraoperative and postoperative pain was measured with the visual analog scale (VAS), and laboratory findings were compared before and after the procedure. RESULTS All patients successfully completed the treatment. The mean follow-up period was 12.8 months (range, 3-27 months), and the complete ablation rate was 97% (66/68). Local tumor progression occurred in 11 lesions (16.2%), and the 6-, 12- and 18-month cumulative LTP rates were 4.0%, 8.2% and 20.5%, respectively. Two patients (3.5%, 2/57) developed major complications, and 12 patients had minor complications (22.8%, 12/57). The mean VAS score during the operation was 1.65 points (range, 1-3 points). Postoperative pain worsened in 3 patients, and the VAS scores reached 4-5. Transient changes in biochemical and hematologic markers were observed. CONCLUSION Percutaneous cryoablation for subcapsular HCC is safe and effective, the procedure is simple and the patients suffer less pain.

Dendrite-Free Lithium Deposition via a Superfilling Mechanism for High-Performance Li-Metal Batteries.

Uncontrollable Li dendrite growth and low Coulombic efficiency severely hinder the application of lithium metal batteries. Although a lot of approaches have been developed to control Li deposition, most of them are based on inhibiting lithium deposition on protrusions, which can suppress Li dendrite growth at low current density, but is inefficient for practical battery applications, with high current density and large area capacity. Here, a novel leveling mechanism based on accelerating Li growth in concave fashion is proposed, which enables uniform and dendrite-free Li plating by simply adding thiourea into the electrolyte. The small thiourea molecules can be absorbed on the Li metal surface and promote Li growth with a superfilling effect. With 0.02 m thiourea added in the electrolyte, Li | Li symmetrical cells can be cycled over 1000 cycles at 5.0 mA cm-2 , and a full cell with LiFePO4 | Li configuration can even maintain 90% capacity after 650 cycles at 5.0 C. The superfilling effect is also verified by computational chemistry and numerical simulation, and can be expanded to a series of small chemicals using as electrolyte additives. It offers a new avenue to dendrite-free lithium deposition and may also be expanded to other battery chemistries.

MicroRNA-2053 overexpression inhibits the development and progression of hepatocellular carcinoma.

MicroRNAs (miRNAs) represent a class of small RNAs that participate in the regulation of tumor progression. However, the identification of functional miRNAs in tumors has not been thoroughly elucidated. In the present study we aim to investigate the impact of altered miR-2053 expression in hepatocellular carcinoma (HCC) cells. The results of the present study demonstrated that miR-2053 overexpression inhibited cell proliferation, migration and invasion, and promoted apoptosis in a HCC cell line, while miR-2053 knockdown induced the opposite cellular phenotypic changes. Mechanistically, it was found that overexpression of miR-2053 resulted in the downregulation of the phosphoinositide 3-kinase (PI3K) and Wnt/ß-catenin signaling pathways, which are aberrantly expressed in HCC. Collectively, the results indicate that miR-2053 serves as a tumor suppressor with a crucial role in inhibiting the proliferation, migration and invasion of HCC via targeting the PI3K and Wnt/ß-catenin signaling pathways. These data indicate a potential application of miR-2053 in cancer therapy.