[The Optimal Storage Condition and Storage Time of Umbilical Cord Blood from Collection to Preparation].

OBJECTIVE: To explore the optimal storage condition and time of umbilical cord blood from collection to preparation. METHODS: Collect cord blood samples from 30 healthy newborns, with each new born's umbilical cord blood was divided into two parts on average. One part was stored in cold storage (4 ℃) and the other was stored at room temperature (20-24 ℃). Samples were taken at 24, 36, 48, 60 and 72 h, respectively, total nucleated cells (TNC) count and TNC viability was analyzed. Flow cytometry was used to detect the ratio of viable CD34+ cells to viable CD45+ cells and viability of CD34+ cells, and colony-forming unit-granulocyte-macrophage (CFU-GM) count was performed by hematopoietic progenitor cell colony culture. The change trend of each index over time was observed, and the differences in each index was compared between cold storage and room temperature storage under the same storage time. RESULTS: The TNC count (r 4 ℃=-0.9588， r 20-24 ℃=-0.9790), TNC viability (r 4 ℃=-0.9941， r 20-24 ℃=-0.9970), CD34+ cells viability (r 4 ℃=-0.9932， r 20-24 ℃=-0.9828) of cord blood stored in cold storage (4 ℃) and room temperature storage (20-24 ℃) showed a consistent downward trend with the prolongation of storage time. The percentage of viable CD34+ cells (r 4 ℃=0.9169， r 20-24 ℃=0.7470) and CFU-GM count (r 4 ℃=-0.2537， r 20-24 ℃=-0.8098) did not show consistent trends. When the storage time was the same, the TNC count, TNC viability, CD34+ cells viability and CFU-GM count of cord blood stored in cold storage were higher than those stored at room temperature. Under the same storage time (24, 36, 48, 60 or 72 h), TNC viability in room temperature storage was significantly lower than that in cold storage (P <0.001), but TNC count, percentage of viable CD34+ cells and CFU-GM count were not significantly different between room temperature storage and cold storage. When stored at room temperature for 24 h and 36 h, the viability of CD34+ cells was significantly lower than that in cold storage (P <0.001, P <0.01), when the storage time for 48, 60 and 72 h, there was no significant difference in the CD34+ cells viability between room temperature storage and cold storage. CONCLUSION: It is recommended that cord blood be stored in cold storage (4 ℃) from collection to preparation, and processed as soon as possible.

Observation of novel charge ordering and spin reorientation in perovskite oxide PbFeO3.

PbMO3 (M = 3d transition metals) family shows systematic variations in charge distribution and intriguing physical properties due to its delicate energy balance between Pb 6s and transition metal 3d orbitals. However, the detailed structure and physical properties of PbFeO3 remain unclear. Herein, we reveal that PbFeO3 crystallizes into an unusual 2ap × 6ap × 2ap orthorhombic perovskite super unit cell with space group Cmcm. The distinctive crystal construction and valence distribution of Pb2+0.5Pb4+0.5FeO3 lead to a long range charge ordering of the -A-B-B- type of the layers with two different oxidation states of Pb (Pb2+ and Pb4+) in them. A weak ferromagnetic transition with canted antiferromagnetic spins along the a-axis is found to occur at 600 K. In addition, decreasing the temperature causes a spin reorientation transition towards a collinear antiferromagnetic structure with spin moments along the b-axis near 418 K. Our theoretical investigations reveal that the peculiar charge ordering of Pb generates two Fe3+ magnetic sublattices with competing anisotropic energies, giving rise to the spin reorientation at such a high critical temperature.

General hierarchical structure to solve transport phenomena with dissimilar time scales: Application in large-scale three-dimensional thermosolutal phase-field problems.

A general hierarchical structure is developed for phase-field lattice-Boltzmann simulations with dissimilar time scales. The number of the grid levels can be artificially selected in a reasonable range, which can enhance the time marching step by two to three orders of magnitude in comparison with explicit methods. Constructed on a massively parallel platform, the mesh distribution is dynamically adjusted according to a gradient criterion. The developed high performance computing scheme is applied to simulate the coupled thermosolutal dendrite evolution. Numerical tests indicate that the computing efficiency can be further improved by two to three orders of magnitude, which makes numerical simulation of fully coupled thermosolutal dendrite growth viable for alloys with Lewis number ∼10^{4}. The domain size which equivalently consists of billions of uniform meshes is handled to simulate multidendrite evolution. Results show that the domain temperature becomes extremely uneven due to the release of latent heat, which causes a significant difference from isothermal solidification. A simple analytical model is proposed to predict the relation between growth velocity and Lewis number, and the growth morphologies of both equiaxed and directional multiple dendrites are discussed. The combination of the hierarchical mesh structure and the phase-field lattice-Boltzmann method provides an efficiency-driven approach to solve the coupled thermosolutal microstructure evolution.

Sequential Spin State Transition and Intermetallic Charge Transfer in PbCoO3.

Spin state transitions and intermetallic charge transfers can essentially change material structural and physical properties while excluding external chemical doping. However, these two effects have rarely been found to occur sequentially in a specific material. In this article, we show the realization of these two phenomena in a perovskite oxide PbCoO3 with a simple ABO3 composition under high pressure. PbCoO3 possesses a peculiar A- and B-site ordered charge distribution Pb2+Pb4+3Co2+2Co3+2O12 with insulating behavior at ambient conditions. The high spin Co2+ gradually changes to low spin with increasing pressure up to about 15 GPa, leading to an anomalous increase of resistance magnitude. Between 15 and 30 GPa, the intermetallic charge transfer occurs between Pb4+ and Co2+ cations. The accumulated charge-transfer effect triggers a metal-insulator transition as well as a first-order structural phase transition toward a Tetra.-I phase at the onset of ∼20 GPa near room temperature. On further compression over 30 GPa, the charge transfer completes, giving rise to another first-order structural transformation toward a Tetra.-II phase and the reentrant electrical insulating behavior.

High-Pressure Synthesis of the Cobalt Pyrochlore Oxide Pb2Co2O7 with Large Cation Mixed Occupancy.

The novel A2B2O7-type compound Pb2Co2O7 was synthesized at 8 GPa and 1673 K. Synchrotron X-ray diffraction shows a cubic pyrochlore structure with space group Fd3̅m. Rietveld structural analysis reveals a large cation mixed occupancy at both A and B sites by about 40%, the greatest value found in the pyrochlore family. In combination with the X-ray absorption spectroscopy results, the specific chemical composition and charge states are determined to be (Co0.6Pb0.4)3+2(Pb0.6Co0.4)4+2O7, in which both the A-site Co3+ and the B-site Co4+ are low-spin. Due to the tetrahedral geometric frustration effects as well as the random Co4+ and Pb4+ distribution at the B site, spin glassy behavior is well observed following the conventional critical slowing down feature in Pb2Co2O7.

A-Site and B-Site Charge Orderings in an s-d Level Controlled Perovskite Oxide PbCoO3.

Perovskite PbCoO3 synthesized at 12 GPa was found to have an unusual charge distribution of Pb2+Pb4+3Co2+2Co3+2O12 with charge orderings in both the A and B sites of perovskite ABO3. Comprehensive studies using density functional theory (DFT) calculation, electron diffraction (ED), synchrotron X-ray diffraction (SXRD), neutron powder diffraction (NPD), hard X-ray photoemission spectroscopy (HAXPES), soft X-ray absorption spectroscopy (XAS), and measurements of specific heat as well as magnetic and electrical properties provide evidence of lead ion and cobalt ion charge ordering leading to Pb2+Pb4+3Co2+2Co3+2O12 quadruple perovskite structure. It is shown that the average valence distribution of Pb3.5+Co2.5+O3 between Pb3+Cr3+O3 and Pb4+Ni2+O3 can be stabilized by tuning the energy levels of Pb 6s and transition metal 3d orbitals.

High-Pressure Synthesis and Ferrimagnetic Ordering of the B-Site-Ordered Cubic Perovskite Pb2FeOsO6.

Pb2FeOsO6 was prepared for the first time by using high-pressure and high-temperature synthesis techniques. This compound crystallizes into a B-site-ordered double-perovskite structure with cubic symmetry Fm3̅m, where the Fe and Os atoms are orderly distributed with a rock-salt-type manner. Structure refinement shows an Fe-Os antisite occupancy of about 16.6%. Structural analysis and X-ray absorption spectroscopy both demonstrate the charge combination to be Pb2Fe3+Os5+O6. A long-range ferrimagnetic transition is found to occur at about 280 K due to antiferromagnetic interactions between the adjacent Fe3+ and Os5+ spins with a straight (180°) Fe-O-Os bond angle, as confirmed by X-ray magnetic circular-dichroism measurements. First-principles theoretical calculations reveal the semiconducting behavior as well as the Fe3+(↑)Os5+(↓) antiferromagnetic coupling originating from the superexchange interactions between the half-filled 3d orbitals of Fe and t2g orbitals of Os.

Observation of Magnetoelectric Multiferroicity in a Cubic Perovskite System: LaMn(3)Cr(4)O(12).

Magnetoelectric multiferroicity is not expected to occur in a cubic perovskite system because of the high structural symmetry. By versatile measurements in magnetization, dielectric constant, electric polarization, neutron and x-ray diffraction, Raman scattering, as well as theoretical calculations, we reveal that the A-site ordered perovskite LaMn(3)Cr(4)O(12) with cubic symmetry is a novel spin-driven multiferroic system with strong magnetoelectric coupling effects. When a magnetic field is applied in parallel (perpendicular) to an electric field, the ferroelectric polarization can be enhanced (suppressed) significantly. The unique multiferroic phenomenon observed in this cubic perovskite cannot be understood by conventional spin-driven microscopic mechanisms. Instead, a nontrivial effect involving the interactions between two magnetic sublattices is likely to play a crucial role.

Charge Transfer Induced Multifunctional Transitions with Sensitive Pressure Manipulation in a Metal-Organic Framework.

The metal-organic framework {[Fe(2,2'-bipyridine)(CN)4]2Co(4,4'-bipyridine)}·4H2O (Fe2Co-MOF) with single-chain magnetism undergoes an intermetallic charge transfer that converts the Fe2Co charge/spin configurations from Fe(3+)LS-Co(2+)HS-Fe(3+)LS to Fe(2+)LS-Co(3+)LS-Fe(3+)LS (LS = low spin, HS = high spin) around 220 K under ambient pressure. A series of coherent phase transitions in structure, magnetism, permittivity and ferroelectricity are found to take place accompanying with the charge transfer, making Fe2Co-MOF a unique ferroelectric single-chain magnet at low temperature. Moreover, our detailed measurements of magnetization, dielectric constant, and Raman scattering under high pressures illustrate that the charge transfer as well as the resulting multifunctional transitions can be readily induced to occur at room temperature by applying a tiny external pressure of about 0.5 kbar. The present study thus provides a pressure well-controllable multifunctional material with potential applications in a broad temperature region across room temperature.