Prognostic value of different radiation-related cell death genes in patients with lung adenocarcinoma.

BACKGROUND AND AIMS: Radiotherapy is widely applied for lung adenocarcinoma (LUAD), while individualized differences led to different outcomes. This study aimed to establish a multi-gene risk scoring model to predict the benefits of LUAD patients from radiotherapy, based on different types of cell death respectively. RESULTS: Other than autophagy, pyroptosis, ferroptosis and Immunogenic cell death (ICD), the LUAD prognostic model based on apoptosis had the best performance, and the area under curves (AUCs) of the receiver operating curve (ROC) for 1-, 3-, and 5-year OS were 0.700,0.736,0.723,respectively. Such genes were involved as SLC7A5, EXO1, ABAT, NLRP1 and GAR1. Then patients were divided into high and low risk groups by the median apoptosis-LUAD risk score. For patients in the high-risk group, i.e., the radiotherapy-tolerant group, we screened adjuvant chemotherapy and found that besides the conventional first-line chemotherapy regimen, drugs such as Fludarabine, Pevonedistat, and Podophyllotoxin Bromide may also have potential therapeutic value. CONCLUSION: The multi-gene risk scoring model based on apoptosis might predict the radiotherapy benefits of LUAD patients and for those radioresistant patients classified by the model we also provided effective adjuvant chemicals, which would be used to guide clinical treatment.

DDT exposure induces tremor-like behavior and neurotoxicity in developmental stages of embryonic zebrafish.

Dichlorodiphenyltrichloroethane (DDT) is a broad-spectrum insecticide, widely detected in environments due to its high stability characteristic and long natural half-life period. The adverse impact of DDT exposure on organisms and humans has attracted great concern worldwide. The current study explored the developmental and neurobehavioral toxicity response of DDT in embryonic zebrafish. The embryos were treated with DDT (0, 0.1, 1, 2.5 and 5 µM) during 6 h post fertilization (hpf) to 144 hpf. Our result indicated that DDT exposures increased the embryo hatching rate at 48 and 60 hpf, the larval malformation rate at 120 hpf and mortality rate at 144 hpf. The manifested malformations included uninflated swim bladder, bent spine and tail, deformed liver, and pericardial edema. The 120 hpf larval organs size of the gut and swim bladder was decreased in higher exposed concentration groups. Besides, DDT exposure resulted in hyperactivity for the embryo spontaneous movement at 24 hpf and tremor like movement measured by the free larval activity at 72 hpf, as well as the larval activity at 96 hpf under light-dark transition stimulus. Mechanistic examinations at 120 hpf revealed DDT exposure elevated oxidative stress through MDA formation increase, ATP level decrease as well as antioxidant enzyme genes (sod1 and gpx1a) expression decrease. DDT exposure induced abnormal neurotransmitters expression with DA level increase, 5-HT and NOS level decrease. DDT exposure suppressed the gene expressions involved in axon development (rab33a and nrxn2a) and potassium channel (kcnq2 and kcnq3). Our results suggest that the hyperactivity and tremor like movement in DDT-exposed embryos/larvae may result from oxidative stress involved with neuronal damage.

Development of highly efficient ultraviolet LEDs on hybrid patterned sapphire substrates.

A hybrid patterned sapphire substrate (HPSS) aiming to achieve high-quality Al(Ga)N epilayers for the development of GaN-based ultraviolet light-emitting diodes (UV LEDs) has been prepared. The high-resolution X-ray diffraction measurements reveal that the Al(Ga)N epilayers grown on a HPSS and conventional patterned sapphire substrate (CPSS) have similar structural quality. More importantly, benefiting from the larger refractive index contrast between the patterned silica array and sapphire, the photons can escape from the hybrid substrate with an improved transmittance in the UV band. As a result, in comparison with the UV LEDs grown on the CPSS, the LEDs grown on the HPSS exhibit a significantly enhanced light output power by 14.5% and more than 22.9% higher peak external quantum efficiency, owing to the boost of the light extraction efficiency from the adoption of the HPSS which can be used as a promising substrate to realize high-efficiency and high-power UV LEDs of the future.

Synthesis and Study on Ni-Co Phosphite/Activated Carbon Fabric Composited Materials with Controllable Nano-Structure for Hybrid Super-Capacitor Applications.

The advantage of low resistivity and inactive binders makes binder-free electrode an excellent candidate for high-performance energy devices. A simple hydrothermal method was used to fabricate M11(HPO3)8(OH)6 (M: Ni and Co) (MHP) arrays combined with activated carbon fabric (ACF) without binder. The structures of MHP can be easily tuned from bouquets to nano-sheets by the concentration of NaH2PO2. The MHP/ACF composite materials with different structures showed the typical battery-type characteristic of anodic electrodes. In a three-electrode cell configuration, the MHP nano-sheet arrays/ACF composite has a higher capacity, of 1254 F/g, at a scan rate of 10 mA/cm2 and shows better cycling stability: 84.3% remaining specific capacity after 1000 cycles of charge-discharge measurement. The composite is highly flexible, with almost the same electrochemical performance under stretching mode. The MHP/ACF composite@ACF hybrid supercapacitor can deliver the highest energy density, of 34.1 Wh·kg-1, and a power density of 722 W·kg-1 at 1 A·g-1. As indicated by the results, MHP/ACF composite materials are excellent binder-free electrodes, candidates for flexible high-performance hybrid super-capacitor devices.

Development of multicomponent lattice Boltzmann flux solver for simulation of compressible viscous reacting flows.

In this paper, the multicomponent lattice Boltzmann flux solver (LBFS) is developed for simulation of two-dimensional compressible viscous reacting flows. This work is based on the existing LBFS for simulation of single-component compressible flows. The present solver applies the finite volume method to discretize the multicomponent Navier-Stokes equations and evaluates the numerical flux at the cell interface by local solution of the lattice Boltzmann equation. To evaluate numerical flux, the original non-free parameter D1Q4 model in the existing LBFS is extended to the multicomponent counterpart in which the total density at the cell interface is computed directly by summing the density distribution functions, and the densities of different species are calculated from the mass fractions at the left and right sides of cell interface. The internal energy is evaluated from the enthalpy which considers the different physical properties of the species, and the temperature at the cell interface is obtained by Newton iteration. In addition, an improved switch function which takes into account the reacting effects and aspect ratio of the grid is introduced to control the numerical dissipation. Several benchmark problems are simulated to validate the present multicomponent LBFS. It is shown that the present solver is carbuncle-free for the unfavorable aspect ratio grid in the test cases here and has a satisfied performance for simulation of multicomponent compressible viscous reacting flows.

[Experimental study of increasing effect of the fat flap tissue after delay operation on its free graft survival volume and duration].

OBJECTIVE: To observe the effects of the fat flap tissues after delay operation on free fat-graft survival rate and duration. METHODS: The delay operation of fat flaps was performed in the inguinal region of a rabbit. Expression of VEGF was assayed using Elisa method after 12 hours of flap delay. The fat flaps were harvested and cut into pieces after 21 days. A subdermal pocket was created in each side of the dorsal midline of a rabbit, the fat pieces were grafted randomly into a pocket and the normal fat pieces into the other pocket as control. After 1, 3, 6, 9 and 12 months of implantation, the grafted fats were harvested, gross observation, weight measurement and histology were carried out. Number of the vessels stained with anti-CD34 antibody was counted out. RESULTS: VEGF concentrations in flaps were significantly higher (P < 0.05). The density of vessels in experimental groups increased significantly compared with that in control groups at 1 and 3 months, respectively (P < 0.01), and no significant differences in the survival rate of fat tissues between experimental and control groups were observed at 1 and 3 months (P > 0.05). The fat cells from the flaps survived after 12 months of fat plantation, while those in control groups disappeared after 6 months. CONCLUSIONS: The survival rate and duration of grafted fat could be increased implanting the fat tissues from delayed fat flap, which may provide researchers with a new method for fat graft.