2D-on-2D Al-Doped NiCo LDH Nanosheet Arrays for Fabricating High-Energy-Density, Wide Voltage Window, and Ultralong-Lifespan Supercapacitors.

Battery-type electrode materials with high capacity, wide potential windows, and good cyclic stability are crucial to breaking through energy storage limitations and achieving high energy density. Herein, a novel 2D-on-2D Al-doped NiCo layered double hydroxide (NiCoAlx LDH) nanosheet arrays with high-mass-loading are grown on a carbon cloth (CC) substrate via a two-step hydro/solvothermal deposition strategy, and the effect of Al doping is employed to modify the deposition behavior, hierarchical morphology, phase stability, and multi-metallic synergistic effect. The optimized NiCoAl0.1 LDH electrode exhibits capacities of 5.43, 6.52, and 7.25 C cm-2 (9.87, 10.88, and 11.15 F cm-2) under 0-0.55, 0-0.60, and 0-0.65 V potential windows, respectively, illustrating clearly the importance of the wide potential window. The differentiated deposition strategy reduces the leaching level of Al3+ cations in alkaline solutions, ensuring excellent cyclic performance (108% capacity retention after 40 000 cycles). The as-assembled NiCoAl0.1 LDH//activated carbon cloth (ACC) hybrid supercapacitor delivers 3.11 C cm-2 at 0-2.0 V, a large energy density of 0.84 mWh cm-2 at a power density of 10.00 mW cm-2, and excellent cyclic stability with ≈135% capacity retention after 150 000 cycles.

Insertions of the striated muscles in the skin and mucosa: a histological study of fetuses and cadavers.

Striated muscle insertions into the skin and mucosa are present in the head, neck, and pelvic floor. We reexamined the histology of these tissues to elucidate their role in transmission of the force. We examined histological sections of 25 human fetuses (gestational ages of ~11-19 weeks and ~26-40 weeks) and 6 cadavers of elderly individuals. Facial muscle insertion or terminal almost always formed as an interdigitation with another muscle or as a circular arrangement in which muscle fiber insertions were sandwiched and mechanically supported by other muscle fibers (like an in-series muscle). Our examination of the face revealed some limited exceptions in which muscle fibers that approached the dermis were always in the nasalis and mentalis muscles, and often in the levator labii superioris alaeque nasi muscle. The buccinator muscle was consistently inserted into the basement membrane of the oral mucosa. Parts of the uvulae muscle in the soft palate and of the intrinsic vertical muscle of the tongue were likely to direct toward the mucosa. In contrast, the pelvic floor did not contain striated muscle fibers that were directed toward the skin or mucosa. Although 'cutaneous muscle' is a common term, the actual insertion of a muscle into the skin or mucosa seemed to be very rare. Instead, superficial muscle insertion often consisted of interdigitated muscle bundles that had different functional vectors. In this case, the terminal of one muscle bundle was sandwiched and fixed mechanically by other bundles.

STAG2 mutations regulate 3D genome organization, chromatin loops, and Polycomb signaling in glioblastoma multiforme.

Inactivating mutations of genes encoding the cohesin complex are common in a wide range of human cancers. STAG2 is the most commonly mutated subunit. Here we report the impact of stable correction of endogenous, naturally occurring STAG2 mutations on gene expression, 3D genome organization, chromatin loops, and Polycomb signaling in glioblastoma multiforme (GBM). In two GBM cell lines, correction of their STAG2 mutations significantly altered the expression of ∼10% of all expressed genes. Virtually all the most highly regulated genes were negatively regulated by STAG2 (i.e., expressed higher in STAG2-mutant cells), and one of them - HEPH - was regulated by STAG2 in uncultured GBM tumors as well. While STAG2 correction had little effect on large scale features of 3D genome organization (A/B compartments, TADs), STAG2 correction did alter thousands of individual chromatin loops, some of which controlled the expression of adjacent genes. Loops specific to STAG2-mutant cells, which were regulated by STAG1-containing cohesin complexes, were very large, supporting prior findings that STAG1-containing cohesin complexes have greater loop extrusion processivity than STAG2-containing cohesin complexes and suggesting that long loops may be a general feature of STAG2-mutant cancers. Finally, STAG2 mutation activated Polycomb activity leading to increased H3K27me3 marks, identifying Polycomb signaling a potential target for therapeutic intervention in STAG2-mutant GBM tumors. Together, these findings illuminate the landscape of STAG2-regulated genes, A/B compartments, chromatin loops, and pathways in GBM, providing important clues into the largely still unknown mechanism of STAG2 tumor suppression.

Exploring the neural correlates of fat taste perception and discrimination: Insights from electroencephalogram analysis.

Understanding neural pathways and cognitive processes involved in the transformation of dietary fats into sensory experiences has profound implications for nutritional well-being. This study presents an efficient approach to comprehending the neural perception of fat taste using electroencephalogram (EEG). Through the examination of neural responses to different types of fatty acids (FAs) in 45 participants, we discerned distinct neural activation patterns associated with saturated versus unsaturated fatty acids. The spectrum analysis of averaged EEG signals revealed notable variations in δ and α-frequency bands across FA types. The topographical distribution and source localization results suggested that the brain encodes fat taste with specific activation timings in primary and secondary gustatory cortices. Saturated FAs elicited higher activation in cortical associated with emotion and reward processing. This electrophysiological evidence enhances our understanding of fundamental mechanisms behind fat perception, which is helpful for guiding strategies to manage hedonic eating and promote balanced fat consumption.

CO2 Photoreduction Over Semiconducting 2D Materials with Supported Single Atoms: Recent Progress and Challenges.

In the face of the growing energy crisis and environmental challenges, substantial efforts are now directed toward sustainable clean energy as a replacement for traditional fossil fuels. CO2 photoreduction into value-added chemicals and fuels is widely recognized as a promising approach to mitigate current energy and environmental concerns. Photocatalysts comprising single atoms (SAs) supported on two-dimensional (2D) semiconducting materials (SAs-2DSemi) have emerged as a novel frontier due to the combined merits of SA catalysts and 2D materials. In this study, we review advancements in metal SAs confined on 2DSemi substrates, categorized into four groups: (1) metal oxide-based, (2) g-C3N4-based, (3) emerging, and (4) hybridized 2DSemi, for photocatalytic CO2 conversion over the past few years. With a particular focus on highlighting the distinct advantages of SAs-2DSemi, we delve into the synthesis of state-of-the-art catalysts, their catalytic performances, and mechanistic elucidation facilitated by experimental characterizations and theoretical calculations. Following this, we outline the challenges in this field and offer perspectives on harnessing the potential of SAs-2DSemi as promising photocatalysts. This comprehensive review aims to provide valuable insights for the future development of 2D photocatalytic materials involving SAs for CO2 reduction.

Assays on 3D tumor spheroids for exploring the light dosimetry of photodynamic effects under different gaseous conditions.

The multifaceted nature of photodynamic therapy (PDT) requires a throughout evaluation of a multitude of parameters when devising preclinical protocols. In this study, we constructed MCF-7 human breast tumor spheroid assays to infer PDT irradiation doses at four gradient levels for violet light at 408 nm and red light at 625 nm under normal and hypoxic oxygen conditions. The compacted three-dimensional (3D) tumor models conferred PDT resistance as compared to monolayer cultures due to heterogenous distribution of photosensitizers along with the presence of internal hypoxic region. Cell viability results indicated that the violet light was more efficient to kill cells in the spheroids under normal oxygen conditions, while cells exposed to the hypoxic microenvironment exhibited minimal PDT-induced death. The combination of 3D tumor spheroid assays and the multiparametric screening platform presented a solid framework for assessing PDT efficacy across a wide range of different physiological conditions and therapeutic regimes.

Effects of remimazolam tosilate on gastrointestinal hormones and gastrointestinal motility in patients undergoing gastrointestinal endoscopy with sedation: a randomized control trial.

PURPOSE: To investigate the impacts of remimazolam tosilate on gastrointestinal hormones and motility in patients undergoing gastrointestinal endoscopy with sedation. METHODS: A total of 262 American Society of Anesthesiologists Physical Status I or II patients, aged 18-65 years, scheduled for gastrointestinal endoscopy with sedation, were randomly allocated into two groups (n = 131 each): the remimazolam tosilate group (Group R) and the propofol group (Group P). Patients in Group R received 0.2-0.25 mg/Kg remimazolam tosilate intravenously, while those in Group P received 1.5-2.0 mg/kg propofol intravenously. The gastrointestinal endoscopy was performed when the Modified Observer's Assessment of Alertness/Sedation scores were ≤3. The primary endpoints included the endoscopic intestinal peristalsis rating by the endoscopist; serum motilin and gastrin levels at fasting without gastrointestinal preparation (T0), before gastrointestinal endoscopy (T1), and before leaving the Post Anesthesia Care Unit (T2); and the incidences of abdominal distension during Post Anesthesia Care Unit. RESULTS: Compared with Group P, intestinal peristalsis rating was higher in Group R (P < .001); Group R showed increased motilin and gastrin levels at T2 compared with Group P (P < .01). There was a rise in motilin and gastrin levels at T1 and T2 compared with T0 and at T2 compared with T1 in both groups (P < .01). The incidence of abdominal distension was lower in Group R (P < .05). CONCLUSION: Compared with propofol used during gastrointestinal endoscopy with sedation, remimazolam tosilate mildly inhibits the serum motilin and gastrin levels, potentially facilitating the recovery of gastrointestinal motility.

Modeling and mobile home monitoring of behavioral and psychological symptoms of dementia (BPSD).

With the increasing global aging population, dementia care has rapidly become a major social problem. Current diagnosis of Behavior and Psychological Symptoms of Dementia (BPSD) relies on clinical interviews, and behavioral rating scales based on a period of behavior observation, but these methods are not suitable for identification of occurrence of BPSD in the daily living, which is necessary for providing appropriate interventions for dementia, though, has been studied by few research groups in the literature. To address these issues, in this study developed a BPSD monitoring system consisting of a Psycho-Cognitive (PsyCo) BPSD model, a Behavior-Physio-Environment (BePhyEn) BPSD model, and an implementation platform. The PsyCo BPSD model provides BPSD assessment support to caregivers and care providers, while the BePhyEn BPSD model provides instantaneous alerts for BPSD enabled by a 24-hour home monitoring platform for early intervention, and thereby alleviation of burden to patients and caregivers. Data for acquiring the models were generated through extensive literature review and regularity determined. A mobile robot was utilized as the implementation platform for improving sensitivity of sensors for home monitoring, and elderly individual following algorithms were investigated. Experiments in a virtual home environment showed that, a virtual BPSD elderly individual can be followed safely by the robot, and BPSD occurrence could be identified accurately, demonstrating the possibility of modeling and identification of BPSD in home environment.

Cellular Lipids Regulate the Conformational Ensembles of the Disordered Intracellular Loop 3 in ß2 Adrenergic Receptor.

The structurally disordered intracellular loops (ICLs) of G protein-coupled receptors (GPCRs) play a critical role in G protein coupling. In our previous work, we used a combination of FRET-based and computational methodologies to show that the third intracellular loop (ICL3) modulates the activity and G protein coupling selectivity in GPCRs. In the current study, we have uncovered the role of several lipid components in modulating the conformational ensemble of ICL3 of the ß2-adrenergic receptor (ß2AR). Our findings indicate that phosphatidylinositol 4,5-bisphosphate (PIP2) in the inner leaflet of the membrane bilayer acts as a stabilizing anchor for ICL3, opening the intracellular cavity to facilitate G protein coupling. This interaction between PIP2 and ICL3 causes tilting of ß2AR within the cellular membrane. Notably, this tilting of the receptor is supported by ganglioside GM3 stabilizing the extracellular loops on the outer leaflet of the bilayer, thereby exerting an allosteric effect on the orthosteric ligand binding pocket. Our results underscore the significance of lipids in modulating GPCR activity, proposing an allosteric mechanism that occurs through the receptor's orientation within the membrane.

REC-NN: A reconstruction error compensation neural network for Magnetic Resonance Electrical Property Tomography (MREPT).

Electrical properties (EPs) are expected as biomarkers for early cancer detection. Magnetic resonance electrical properties tomography (MREPT) is a technique to non-invasively estimate the EPs of tissues from MRI measurements. While noise sensitivity and artifact problems of MREPT are being solved progressively through recent efforts, the loss of tissue contrast emerges as an obstacle to the clinical applications of MREPT. To solve the problem, we propose a reconstruction error compensation neural network scheme (REC-NN) for a typical analytic MREPT method, Stab-EPT. Two NN structures: one with only ResNet blocks, and the other hybridizing ResNet blocks with an encoder-decoder structure. Results of experiments with digital brain phantoms show that, compared with Stab-EPT, and conventional NN based reconstruction, REC-NN improves both reconstruction accuracy and tissue contrast. It is found that, the encoder-decoder structure could improve the compensation accuracy of EPs in homogeneous region but showed worse reconstruction than only ResNet structure for tumorous tissues unseen in the training samples. Future research is required to address overcompensation problems, optimization of NN structure and application to clinical data.

Stroke Inpatient Rehabilitation Environments: Aligning Building Construction and Clinical Practice Guidelines Through Care Process Mapping.

BACKGROUND: Stroke inpatient rehabilitation is a complex process involving stroke survivors, staff, and family utilizing a common space for a shared purpose: to optimize recovery. This complex pathway is rarely fully described. Stroke care is ideally guided by Clinical Practice Guidelines, and the rehabilitation built environment should serve to optimize care delivery, patient and staff experience. We aimed to articulate the inpatient stroke rehabilitation process of care in a series of process maps, and to understand the degree to which current stroke clinical and building construction (ie, design) guidelines align to support inpatient stroke rehabilitation. METHODS: We used the Value-Focused Process Engineering methodology to create maps describing the events and activities that typically occur in the current stroke inpatient rehabilitation service model. These maps were completed through individual and group session consultations with stroke survivors, architects, policy makers, and clinical experts. We then determined which sections of the Australian Stroke Rehabilitation Guidelines and the Australasian Health Facility Design Guidelines could be aligned and applied to the process maps. RESULTS: We present a summary process map for stroke inpatient rehabilitation, alongside detailed process maps for 4 different phases of rehabilitation (admission, a normal weekday, a weekend day, and discharge) using Value-Focused Process Engineering notation. The integration of design and clinical guidelines with care pathway maps revealed where guidelines lack detail to be readily linked to current stroke inpatient care practice, providing an opportunity to design stroke inpatient rehabilitation spaces based on the activities occurring within them. CONCLUSIONS: Our findings highlight gaps where clinical and design experts should work together to use guidelines to their full potential; and to improve the process of planning for future stroke rehabilitation units.

Insights into brain perceptions of the different taste qualities and hedonic valence of food via scalp electroencephalogram.

Investigating brain activity is essential for exploring taste-experience related cues. The paper aimed to explore implicit (unconscious) emotional or physiological responses related to taste experiences using scalp electroencephalogram (EEG). We performed implicit measures of tastants of differing perceptual types (bitter, salty, sour and sweet) and intensities (low, medium, and high). The results showed that subjects were partially sensitive to different sensory intensities, i.e., for high intensities, taste stimuli could induce activation of different rhythm signals in the brain, with α and θ bands possibly being more sensitive to different taste types. Furthermore, the neural representations and corresponding sensory qualities (e.g., "sweet: pleasant" or "bitter: unpleasant") of different tastes could be discriminated at 250-1,500 ms after stimulus onset, and different tastes exhibited distinct temporal dynamic differences. Source localization indicated that different taste types activate brain areas associated with emotional eating, reward processing, and motivated tendencies, etc. Overall, our findings reveal a larger sophisticated taste map that accounted for the diversity of taste types in the human brain and assesses the emotion, reward, and motivated behavior represented by different tastes. This study provided basic insights and a perceptual foundation for the relationship between taste experience-related decisions and the prediction of brain activity.

Corrigendum: Design of a SMA-based soft composite structure for wearable rehabilitation gloves.

[This corrects the article DOI: 10.3389/fnbot.2023.1047493.].

Quantitative proteomics analysis on the meat quality of processed pale, soft, and exudative (PSE)-like broiler pectoralis major by different heating methods.

This study aims to assess and compare the influences of different heating methods on the quality characteristics of pale, soft, and exudative (PSE)-like and normal (NOR) pectoralis major through quantitative proteomic analysis. A total of 632 proteins were identified, and there were 84, 89, 50, and 43 differentially abundant proteins (DAPs) between processed PSE and NOR samples after four thermal treatments, including boiling (BO), steaming (ST), roasting (RO), and microwaving (MV), respectively, where moist heating conditions led to more different protein abundance. Processed PSE muscles resulted in significant changes in structural proteins related to myofibrillar and connective tissue, which could be associated with their structural instability and degraded quality. Collagen, tropomyosin, myoglobin, and hemoglobin could be potential indicators of PSE muscles color stability and variation during thermal processing. The quantitative proteomic analysis will help correlate molecular changes with processed meat quality towards future optimization of PSE poultry meat processing.

Transformation-Optics-Designed Plasmonic Singularities for Efficient Photocatalytic Hydrogen Evolution at Metal/Semiconductor Interfaces.

Inspired by transformation optics, we propose a new concept for plasmonic photocatalysis by creating a novel hybrid nanostructure with a plasmonic singularity. Our geometry enables broad and strong spectral light harvesting at the active site of a nearby semiconductor where the chemical reaction occurs. A proof-of-concept nanostructure comprising Cu2ZnSnS4 (CZTS) and Au-Au dimer (t-CZTS@Au-Au) is fabricated via a colloidal strategy combining templating and seeded growth. On the basis of numerical and experimental results of different related hybrid nanostructures, we show that both the sharpness of the singular feature and the relative position to the reactive site play a pivotal role in optimizing photocatalytic activity. Compared with bare CZTS, the hybrid nanostructure (t-CZTS@Au-Au) exhibits an enhancement of the photocatalytic hydrogen evolution rate by up to ∼9 times. The insights gained from this work might be beneficial for designing efficient composite plasmonic photocatalysts for diverse photocatalytic reactions.

Emission of VOCs from service stations in Beijing: Species characteristics and pollutants co-control based on SOA and O3.

Currently, air pollution is primarily characterized by PM2.5 and O3. Therefore, the co-control of PM2.5 and O3 has become an important task of atmosphere pollution prevention and control in China. However, few studies have been conducted on the emissions from vapor recovery and processes, which is an important source of VOCs. This paper analyzed the VOC emissions of three vapor process technologies in service stations and first proposed key pollutants for priority control based on the coordinated reactivity of O3 and SOA. The concentration of VOCs emitted from the vapor processor was 3.14-9.95 g m-3, compared to 631.2-717.8 g m-3 for uncontrolled vapor. Alkanes, alkenes, and halocarbons accounted for a high proportion of the vapor both before and after control. Among the emissions, i-pentane, n-butane, and i-butane were the most abundant species. Then, the species of OFP and SOAP were calculated through the maximum incremental reactivity (MIR) and fractional aerosol coefficient (FAC). The average source reactivity (SR) value of the VOC emissions from three service stations was 1.9 g g-1, while the OFP ranged from 8.2 to 13.9 g m-3 and SOAP ranged from 0.18 to 0.36 g m-3. By considering the coordinated chemical reactivity of O3 and SOA, a comprehensive control index (CCI) was proposed for the control of key pollutant species that have multiplier effects on environment. For adsorption, trans-2-butene and p-xylene were the key co-control pollutants, while toluene and trans-2-butene were the most important for membrane and condensation + membrane control. A 50% emission reduction of the top two key species that emission account for 4.3% averagely will reduce O3 by 18.4% and SOA by 17.9%.

Imparting Outstanding Dispersibility to Nanoscaled 2D COFs for Constructing Organic Solvent Forward Osmosis Membranes.

In the context of thin-film nanocomposite membranes with interlayer (TFNi), nanoparticles are deposited uniformly onto the support prior to the formation of the polyamide (PA) layer. The successful implementation of this approach relies on the ability of nanoparticles to meet strict requirements regarding their sizes, dispersibility, and compatibility. Nevertheless, the synthesis of covalent organic frameworks (COFs) that are well-dispersed, uniformly morphological, and exhibit improved affinity to the PA network, while preventing agglomeration, remains a significant challenge. In this work, a simple and efficient method is presented for the synthesis of well-dispersed, uniformly morphological, and amine-functionalized 2D imine-linked COFs regardless of the ligand composition, group type, or framework pore size, by utilizing a polyethyleneimine (PEI) shielded covalent self-assembly strategy. Subsequently, the as-prepared COFs are incorporated into TFNi for the recycling of pharmaceutical synthetic organic solvents. After optimization, the membrane exhibits a high rejection rate and a favorable solvent flux, making it a reliable method for efficient organic recovery and the concentration of active pharmaceutical ingredient (API) from the mother liquor through an organic solvent forward osmosis (OSFO) process. Notably, this study represents the first investigation of the impact of COF nanoparticles in TFNi on OSFO performance.

Design of a SMA-based soft composite structure for wearable rehabilitation gloves.

The combination of smart soft composite structure based shape memory alloy (SMA) and exoskeleton technology has the advantages of light weight, energy saving, and great human-exoskeleton interaction. However, there are no relevant studies on the application of SMA-based soft composite structure (SSCS) in hand exoskeletons. The main difficulty is that directional mechanical properties of SSCS need to comply with fingers movement, and SSCS can deliver enough output torque and displacement to the relevant joints. This paper aims to study the application of SSCS for wearable rehabilitation gloves and explore its bionic driving mechanism. This paper proposes a soft wearable glove (Glove-SSCS) for hand rehabilitation actuated by the SSCS, based on finger force analysis under different drive modes. The Glove-SSCS can support five-finger flexion and extension, weighs only 120 g, and adopts modular design. Each drive module adopts a soft composite structure. And the structure integrates actuation, sensing and execution, including an active layer (SMA spring), a passive layer (manganese steel sheet), a sensing layer (bending sensor) and connection layers. To obtain a high-performance SMA actuators, the performance of SMA materials was tested in terms of temperature and voltage, temperature at the shortest length, pre-tensile length and load. And the human-exoskeleton coupling model of Glove-SSCS is established and analyzed from force and motion. The results show that the Glove-SSCS can realize bidirectional movements of fingers flexion and extension, with ranges of motion are 90-110° and 30-40°, and their cycles are 13-19 s and 11-13 s. During the use of Glove-SSCS, the temperature of gloves is from 25 to 67°C, and the surface temperature of hands is from 32 to 36°C. The temperature of Glove-SSCS can be kept at the lowest temperature of SMA operation without much impact on the human body.

[Chemical Composition of VOCs from Service Stations Vapor Processing Device and Associated Contributions to Secondary Pollution].

Vapor processing device is a device that can control the headspace pressure in the underground storage tanks and recover the vapor. By analyzing the chemical composition of volatile organic compounds (VOCs) at the inlet and outlet of the vapor processing device, the ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAP) were estimated by maximum incremental reaction (MIR) and fractional aerosol coefficients (FAC), and the secondary pollution formation contribution of VOCs were quantitatively evaluated. The results showed that:① the ρ(total volatile organic compounds, TVOC) at the inlet and outlet of the vapor processing device were 436-706 g·m-3 and 4.98-10.04 g·m-3, respectively. Alkanes (72%±4%), oxygenated organics (14%±2%), and olefins (11%±5%) were the dominant components of VOCs emissions. There were little differences in VOCs emissions from the different vapor processing devices; the key species were i-pentane (approximately 25%), followed by n-butane, i-butane, and n-pentane. ② The ozone source reactivity (SR) of VOCs emissions from the outlet of the vapor processing device was 2.6-3.3 g·g-1, and the OFP was 3.5-25.6 g·m-3. Olefins contributed the most (43%-69%), followed by alkanes (20%-35%) and oxygenated organics (10%-22%). Butene, cis-2-butene, trans-2-butene, i-pentane, and propionaldehyde were the species that highly contributed to OFP. ③ Aromatics in VOCs emissions contributed the most to SOAP (80%-92%), and the main active species were toluene, 1, 2, 4-trimethylbenzene, 1, 3, 5-trimethylbenzene, and p-diethylbenzene. The research showed that different VOCs species emitted by the vapor processing device contributed obvious differences to the secondary atmospheric pollution, and butene species and aromatics such as toluene were the focus of VOCs emission control of vehicle gasoline and vapor processing device.