RESUMO
Zeolite has a high adsorption capacity for heavy metals, but it is difficult to separate from the medium because of its small particle size. In this study, magnetic zeolite was synthesized from natural, low-grade molybdenum ore by adding nano ferroferric oxide (saturation magnetization 83.43 emu/g) directly in the hydrothermal synthesis process, which was used to adsorb cadmium from wastewater. The results of scanning electron microscopy showed that the nano ferroferric oxide was adhered to the surface of the zeolite to make it magnetic. The vibrating sample magnetometer showed that the larger the amount of nano ferroferric oxide added, the higher the saturation magnetization of the magnetic zeolite. The saturation magnetization of the magnetic zeolite with a loading proportion of 25% was 18.18 emu/g with a specific surface area of 459.8 m2/g. The adsorption experiments showed that when the pH value is greater than 4, the adsorption capacity of magnetic zeolite is high and stable, and the theoretical maximum adsorption capacity is 204.2 mg Cd/g. Na+ and Ca2+ have different inhibitory functions on the adsorption capacity. The mapping graphs showed that cadmium is captured by the magnetic zeolite after contact with cadmium, and XRD confirmed the presence of cadmium oxide in the magnetic zeolite after adsorption, XPS and EDS results indicated that ion exchange is one of the main mechanisms of cadmium adsorption by magnetic zeolites, and electrostatic adsorption may also have a contribution.
RESUMO
This study described the development of a method based on Soxhlet extraction combining high performance liquid chromatography (Soxhlet-HPLC) for the accurate detection of BDE-209 in soils. The solvent effect of working standard solutions in HPLC was discussed. Results showed that 1:1 of methanol and acetone was the optimal condition which could totally dissolve the BDE-209 in environmental samples and avoid the decrease of the peak area and the peak deformation difference of BDE-209 in HPLC. The preliminary experiment was conducted on the configured grassland (1 µ g/g) to validate the method feasibility. The method produced reliable reproducibility, simulated soils (n = 4) RSD 1.0%, and was further verified by the analysis e-waste contaminated soils, RSD range 5.9-11.4%. The contamination level of BDE-209 in burning site was consistent with the previous study of Longtang town but lower than Guiyu town, and higher concentration of BDE-209 in paddy field mainly resulted from the long-standing disassembling area nearby. This accurate and fast method was successfully developed to extract and analyze BDE-209 in soil samples, showing its potential use for replacing GC to determinate BDE-209 in soil samples.
