RESUMO
The dynamics and chemistry of interfacial water are essential components of electrocatalysis because the decomposition and formation of water molecules could dictate the protonation and deprotonation processes on the catalyst surface. However, it is notoriously difficult to probe interfacial water owing to its location between two condensed phases, as well as the presence of external bias potentials and electrochemically induced reaction intermediates. An atomically flat single-crystal surface could offer an attractive platform to resolve the internal structure of interfacial water if advanced characterization tools are developed. To this end, here we report a protocol based on the combination of in situ Raman spectroscopy and ab initio molecular dynamics (AIMD) simulations to unravel the directional molecular features of interfacial water. We present the procedures to prepare single-crystal electrodes, construct a Raman enhancement mode with shell-isolated nanoparticle, remove impurities, eliminate the perturbation from bulk water and dislodge the hydrogen bubbles during in situ electrochemical Raman experiments. The combination of the spectroscopic measurements with AIMD simulation results provides a roadmap to decipher the potential-dependent molecular orientation of water at the interface. We have prepared a detailed guideline for the application of combined in situ Raman and AIMD techniques; this procedure may take a few minutes to several days to generate results and is applicable to a variety of disciplines ranging from surface science to energy storage to biology.
Assuntos
Simulação de Dinâmica Molecular , Análise Espectral Raman , Água/química , Eletrodos , HidrogênioRESUMO
Enhanced electrochemiluminescence (ECL) aims to promote higher sensitivity and obtain better detection limit. The core-shell nanostructures, owing to unique surface plasmon resonance (SPR) enabling distance-dependent strong localized electromagnetic field, have attracted rising attention in enhanced ECL research and application. However, the present structures usually with porous shell involve electrocatalytic activity from the metal core and adsorption effect from the shell, which interfere with practical SPR enhancement contribution to ECL signal. Herein, to exclude the interference and unveil exact SPR-enhanced effect, shell-isolated nanoparticles (SHINs) whose shell gets thicker and becomes pinhole-free are developed by modifying pH value and particles concentration. Furthermore, allowing for the distribution of hotspots and stronger enhancement, excitation intensity and ECL reaction layer thickness are mainly investigated, and several types of SHINs-enhanced ECL platforms are prepared to fabricate distinct hotspot distribution via electrostatic attraction (submonolayer) and a layer-by-layer deposition method (monolayer). Consequently, the strongest enhancement up to ≈250-fold is achieved by monolayer SHINs with 10 nm shell, and the platform is applied in a "turn-off" mode sensing for dopamine. The platform provides new guidelines to shell preparation, interface engineering and hotspots fabrication for superior ECL enhancement and analytical application with high performance.
Assuntos
Técnicas Biossensoriais , Nanopartículas Metálicas , Técnicas Biossensoriais/métodos , Dopamina , Técnicas Eletroquímicas/métodos , Ouro/química , Medições Luminescentes/métodos , Nanopartículas Metálicas/químicaRESUMO
The light-matter interaction between plasmonic nanocavity and exciton at the sub-diffraction limit is a central research field in nanophotonics. Here, we demonstrated the vertical distribution of the light-matter interactions at ~1 nm spatial resolution by coupling A excitons of MoS2 and gap-mode plasmonic nanocavities. Moreover, we observed the significant photoluminescence (PL) enhancement factor reaching up to 2800 times, which is attributed to the Purcell effect and large local density of states in gap-mode plasmonic nanocavities. Meanwhile, the theoretical calculations are well reproduced and support the experimental results.
RESUMO
Plasmonic metals under photoexcitation can generate energetic hot electrons to directly induce chemical reactions. However, the capability and fundamental insights of the transportation of these hot electrons at plasmonic metal-2D material interfaces remain unclear. Herein, hot-electron transfer at Au-graphene interfaces has been in situ studied using surface-enhanced Raman spectroscopy (SERS) with atomic layer accuracy. Combining in situ SERS studies with density functional theory calculations, it is proved that hot electrons can be injected from plasmonic Au nanoparticles to graphene and directly penetrate graphene to trigger photocatalytic reactions. With increasing graphene layers, the transportation of hot electrons decays rapidly and would be completely blocked after five layers of graphene. Moreover, the transfer of hot electrons can be modulated by applying an external electric field, and the hot-electron transfer efficiency under electrochemical conditions is improved by over three times in the presence of a monolayer of graphene.
RESUMO
Understanding the structure and dynamic process of water at the solid-liquid interface is an extremely important topic in surface science, energy science and catalysis1-3. As model catalysts, atomically flat single-crystal electrodes exhibit well-defined surface and electric field properties, and therefore may be used to elucidate the relationship between structure and electrocatalytic activity at the atomic level4,5. Hence, studying interfacial water behaviour on single-crystal surfaces provides a framework for understanding electrocatalysis6,7. However, interfacial water is notoriously difficult to probe owing to interference from bulk water and the complexity of interfacial environments8. Here, we use electrochemical, in situ Raman spectroscopic and computational techniques to investigate the interfacial water on atomically flat Pd single-crystal surfaces. Direct spectral evidence reveals that interfacial water consists of hydrogen-bonded and hydrated Na+ ion water. At hydrogen evolution reaction (HER) potentials, dynamic changes in the structure of interfacial water were observed from a random distribution to an ordered structure due to bias potential and Na+ ion cooperation. Structurally ordered interfacial water facilitated high-efficiency electron transfer across the interface, resulting in higher HER rates. The electrolytes and electrode surface effects on interfacial water were also probed and found to affect water structure. Therefore, through local cation tuning strategies, we anticipate that these results may be generalized to enable ordered interfacial water to improve electrocatalytic reaction rates.
RESUMO
The adsorption and electrooxidation of CO molecules at well-defined Pt(hkl) single-crystal electrode surfaces is a key step towards addressing catalyst poisoning mechanisms in fuel cells. Herein, we employed inâ situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) coupled with theoretical calculation to investigate CO electrooxidation on Pt(hkl) surfaces in acidic solution. We obtained the Raman signal of top- and bridge-site adsorbed CO* molecules on Pt(111) and Pt(100). In contrast, on Pt(110) surfaces only top-site adsorbed CO* was detected during the entire electrooxidation process. Direct spectroscopic evidence for OH* and COOH* species forming on Pt(100) and Pt(111) surfaces was afforded and confirmed subsequently via isotope substitution experiments and DFT calculations. In summary, the formation and adsorption of OH* and COOH* species plays a vital role in expediting the electrooxidation process, which relates with the pre-oxidation peak of CO electrooxidation. This work deepens knowledge of the CO electrooxidation process and provides new perspectives for the design of anti-poisoning and highly effective catalysts.
RESUMO
The creatinine concentration of human urine is closely related to human kidney health and its rapid, quantitative, and low-cost detection has always been demanded. Herein, a surface-enhanced Raman spectroscopic (SERS) method for rapid and cost-effective quantification of creatinine concentrations in human urine was developed. A Au nanoparticle solution (Au sol) was used as a SERS substrate and the influence of different agglomerating salts on its sensitivity toward detecting creatinine concentrations was studied and optimized, as well as the effect of both the salt and Au sol concentrations. The variation in creatinine spectra over time on different substrates was also examined, demonstrating reproducible quantitative analysis of creatinine concentrations in solution. By adjusting the pH, a simple liquid-liquid solvent extraction procedure, which extracted creatinine from human urine, was used to increase the SERS detection selectivity toward creatinine in complex matrices. The quantitative results were compared to those obtained with a clinically validated enzymatic "creatinine kit (CK)." The limit of detection (LOD) for the SERS technique was 1.45 mg L-1, compared with 3.4 mg L-1 for the CK method. Furthermore, cross-comparing the results from the two methods, the average difference was 5.84% and the whole SERS detection process could be completed within 2 min compared with 11 min for the CK, indicating the practicality of the quantitative SERS technique. This novel quantitative technique shows promises as a high-throughput platform for relevant clinical and forensic analysis.
Assuntos
Técnicas Biossensoriais , Creatinina/isolamento & purificação , Nanopartículas Metálicas/química , Creatinina/urina , Ouro/química , Humanos , Análise Espectral RamanRESUMO
In situ monitoring of electrocatalytic processes at solid-liquid interfaces is essential for the fundamental understanding of reaction mechanisms, yet quite challenging. Herein, Pt-on-Au nanocatalysts with a Au-core Pt-satellite superstructure have been fabricated. In such Pt-on-Au nanocatalysts, the Au cores can greatly amplify the Raman signals of the species adsorbed on Pt, allowing the in situ surface-enhanced Raman spectroscopy (SERS) study of the electrocatalytic reactions on Pt. Using the combination of an electrochemical method and in situ SERS, size effects of Pt on the catalytic performance of the core-satellite nanocomposites towards CO and methanol electrooxidation are revealed. It is found that such Pt-on-Au nanocomposites show improved activity and long-term stability for the electrooxidation of CO and methanol with a decrease in the Pt size. This work demonstrates an effective strategy to achieve the in situ monitoring of electrocatalytic processes and to simultaneously boost their catalytic performance towards electrooxidation.
RESUMO
OBJECTIVE: To obtain the normative values of the testis volume of 0ï¼14 years old Chinese boys by ultrasound measurement. METHODS: We collected the testicular ultrasound data on 1607 Chinese boys with normal testes between January 2016 and June 2019. The boys were aged 0ï¼14 years and divided into 14 age groups, with at least 100 cases in each group. We compared the mean, standard deviation and median of the testis volume among different age groups. RESULTS: The testis grew slowly in volume before 8 years old (0.372ï¼0.678 ml), faster after 9 years old (1.040ï¼4.600 ml), (1.040 ± 0.970) ml at 9ï¼10 years, (1.876 ± 1.631) ml at 10ï¼11 years, (2.831 ± 2.155) ml at 11ï¼12 years, (3.640 ± 2.376) ml at 12ï¼13 years, and (4.600 ± 3.559) ml at 13ï¼14 years, larger in the 0ï¼1 than in the 1ï¼2 years group (ï¼»0.403 ± 0.130ï¼½ vs ï¼»0.372 ± 0.110ï¼½ ml, P = 0.04), negatively correlated in age between the two groups. CONCLUSIONS: Ultrasonography is an effective method for the measurement of the testis volume, which can provide the normative values of the testis volume of the 0ï¼14 years old Chinese boys and some evidence for clinical diagnosis and consultation.
Assuntos
Povo Asiático , Testículo , Adolescente , Criança , Pré-Escolar , China , Humanos , Lactente , Recém-Nascido , Masculino , Testículo/diagnóstico por imagem , UltrassonografiaRESUMO
In dye-sensitized solar cells (DSSCs), the TiO2/dye interface significantly affects photovoltaic performance. However, the adsorption and photoinduced behavior of dye molecules on the TiO2 substrate remains unclear. Herein, shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) was used to study the adsorption and photoinduced behavior of dye (N719) molecules on different TiO2(hkl) surfaces. On TiO2(001) and TiO2(110) surfaces, the in situ SHINERS and mass spectrometry results indicate S[double bond, length as m-dash]C bond cleavage in the anchoring groups of adsorbed N719, whereas negligible bond cleavage occurs on the TiO2(111) surface. Furthermore, DFT calculations show the stability of the S[double bond, length as m-dash]C anchoring group on three TiO2(hkl) surfaces in the order TiO2(001) < TiO2(110) < TiO2(111), which correlated well with the observed photocatalytic activities. This work reveals the photoactivity of different TiO2(hkl) surface structures and can help with the rational design of DSSCs. Thus, this strategy can be applied to real-time probing of photoinduced processes on semiconductor single crystal surfaces.
RESUMO
Solid/liquid interfaces are ubiquitous in nature and knowledge of their atomic-level structure is essential in elucidating many phenomena in chemistry, physics, materials science and Earth science1. In electrochemistry, in particular, the detailed structure of interfacial water, such as the orientation and hydrogen-bonding network in electric double layers under bias potentials, has a significant impact on the electrochemical performances of electrode materials2-4. To elucidate the structures of electric double layers at electrochemical interfaces, we combine in situ Raman spectroscopy and ab initio molecular dynamics and distinguish two structural transitions of interfacial water at electrified Au single-crystal electrode surfaces. Towards negative potentials, the interfacial water molecules evolve from structurally 'parallel' to 'one-H-down' and then to 'two-H-down'. Concurrently, the number of hydrogen bonds in the interfacial water also undergoes two transitions. Our findings shed light on the fundamental understanding of electric double layers and electrochemical processes at the interfaces.
RESUMO
A gap-mode configuration was developed for the in situ SERS study of the structure-activity relationship of Au@Pd core-shell nanocatalysts, which show much better performance in the selective oxidation of benzyl alcohol compared to Pd. The in situ SERS results reveal that the tensile strain in the Pd shell could promote the activation of oxygen, thus improving the activity. Such a tensile strain effect decreases with the increase of the Pd shell thickness, leading to a volcano correlation between the activity and the shell thickness.
RESUMO
Plasmonic "hot spots" play a key role in surface-enhanced Raman scattering (SERS) enabling its ultrahigh surface sensitivity. Thus, precise prediction and control of the location of hot spots in surface nanostructures is of great importance. However, it is difficult to predict the exact location of hot spots due to complex plasmon competition and synergistic effects in three-dimensional (3D) multiparticle surface configurations. In this work, three types of Au@probe@SiO2 core-shell nanoparticles were prepared and a 3D hot spots matrix was assembled via a consecutive layer on layer deposition method. Combined with SERS, distinct probe molecules were integrated into different layers of the 3D multiparticle nanostructure allowing for the hot spots to be precisely located. Importantly, the hot spots could be controlled and relocated by applying different excitation wavelengths, which was verified by simulations and experimental results. This work proposes a new insight and provides a platform for precisely probing and controlling chemical reactions, which has profound implications in both surface analysis and surface plasmonics.
RESUMO
Heterogeneous metal interfaces play a key role in determining the mechanism and performance of catalysts. However, inâ situ characterization of such interfaces at the molecular level is challenging. Herein, two model interfaces, Pd and Pt overlayers on Au single crystals, were constructed. The electronic structures of these interfaces as well as effects of crystallographic orientation on them were analyzed by shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) using phenyl isocyanide (PIC) as a probe molecule. A clear red shift in the frequency of the C≡N stretch (νNC ) was observed, which is consistent with X-ray photoelectron spectroscopy (XPS) data and indicates that the ultrathin Pt and Pd layers donate their free electrons to the Au substrates. Furthermore, inâ situ electrochemical SHINERS studies showed that the electronic effects weaken Pt-C/Pd-C bonds, leading to improved surface activity towards CO electrooxidation.
RESUMO
Tip-enhanced Raman spectroscopy can provide molecular fingerprint information with ultrahigh spatial resolution, but the tip will be easily contaminated, thus leading to artifacts. It also remains a great challenge to establish tip-enhanced fluorescence because of the quenching resulting from the proximity of the metal tip. Herein, we report shell-isolated tip-enhanced Raman and fluorescence spectroscopies by employing ultrathin shell-isolated tips fabricated by atomic layer deposition. Such shell-isolated tips not only show outstanding electromagnetic field enhancement in TERS but also exclude interference by contaminants, thus greatly promoting applications in solution. Tip-enhanced fluorescence has also been achieved using these shell-isolated tips, with enhancement factors of up to 1.7×103 , consistent with theoretical simulations. Furthermore, tip-enhanced Raman and fluorescence signals are acquired simultaneously, and their relative intensities can be manipulated by changing the shell thickness. This work opens a new avenue for ultrahigh resolution surface analysis using plasmon-enhanced spectroscopies.
RESUMO
Insightful understanding of how interfacial structures and properties affect catalytic processes is one of the most challenging issues in heterogeneous catalysis. Here, the essential roles of Pt-Au and Pt-oxide-Au interfaces on the activation of H2 and the hydrogenation of para-nitrothiophenol (pNTP) were studied at molecular level by in situ surface-enhanced Raman spectroscopy (SERS) and shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). Pt-Au and Pt-oxide-Au interfaces were fabricated through the synthesis of Pt-on-Au and Pt-on-SHINs nanocomposites. Direct spectroscopic evidence demonstrates that the atomic hydrogen species generated on the Pt nanocatalysts can spill over from Pt to Au via the Pt-Au and Pt-TiO2-Au interfaces, but would be blocked at the Pt-SiO2-Au interfaces, leading to the different reaction pathways and product selectivity on Pt-on-Au and Pt-on-SHINs nanocomposites. Such findings have also been verified by the density functional theory calculation. In addition, it is found that nanocatalysts assembled on pinhole-free shell-isolated nanoparticles (Pt-on-pinhole-free-SHINs) can override the influence of the Au core on the reaction and can be applied as promising platforms for the in situ study of heterogeneous catalysis. This work offers a concrete example of how SERS/SHINERS elucidate details about in situ reaction and helps to dig out the fundamental role of interfaces in catalysis.
RESUMO
Surface molecular information acquired in situ from a catalytic process can greatly promote the rational design of highly efficient catalysts by revealing structure-activity relationships and reaction mechanisms. Raman spectroscopy can provide this rich structural information, but normal Raman is not sensitive enough to detect trace active species adsorbed on the surface of catalysts. Here we develop a general method for in situ monitoring of heterogeneous catalytic processes through shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) satellite nanocomposites (Au-core silica-shell nanocatalyst-satellite structures), which are stable and have extremely high surface Raman sensitivity. By combining operando SHINERS with density functional theory calculations, we identify the working mechanisms for CO oxidation over PtFe and Pd nanocatalysts, which are typical low- and high-temperature catalysts, respectively. Active species, such as surface oxides, superoxide/peroxide species and Pd-C/Pt-C bonds are directly observed during the reactions. We demonstrate that in situ SHINERS can provide a deep understanding of the fundamental concepts of catalysis.
RESUMO
An atomic- and molecular-level understanding of heterogeneous catalysis is required to characterize the nature of active sites and improve the rational design of catalysts. Achieving this level of characterization requires techniques that can correlate catalytic performances to specific surface structures, so as to avoid averaging effects. Tip-enhanced Raman spectroscopy combines scanning probe microscopy with plasmon-enhanced Raman scattering and provides simultaneous topographical and chemical information at the nano/atomic scale from ambient to ultrahigh-vacuum and electrochemical environments. Therefore, it has been used to monitor catalytic reactions and is proposed to correlate the local structure and function of heterogeneous catalysts. Bimetallic catalysts, such as Pd-Au, show superior performance in various catalytic reactions, but it has remained challenging to correlate structure and reactivity because of their structural complexity. Here, we show that TERS can chemically and spatially probe the site-specific chemical (electronic and catalytic) and physical (plasmonic) properties of an atomically well-defined Pd(sub-monolayer)/Au(111) bimetallic model catalyst at 3â nm resolution in real space using phenyl isocyanide as a probe molecule (Fig. 1a). We observe a weakened N≡C bond and enhanced reactivity of phenyl isocyanide adsorbed at the Pd step edge compared with that at the Pd terrace. Density functional theory corroborates these observations by revealing a higher d-band electronic profile for the low-coordinated Pd step edge atoms. The 3â nm spatial resolution we demonstrate here is the result of an enhanced electric field and distinct electronic properties at the step edges.
RESUMO
Correction for 'Shell-isolated nanoparticle-enhanced Raman spectroscopy study of the adsorption behaviour of DNA bases on Au(111) electrode surfaces' by Bao-Ying Wen et al., Analyst, 2016, DOI: 10.1039/c6an00180g.
RESUMO
For the first time, we used the electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (EC-SHINERS) technique to in situ characterize the adsorption behaviour of four DNA bases (adenine, guanine, thymine, and cytosine) on atomically flat Au(111) electrode surfaces. The spectroscopic results of the various molecules reveal similar features, such as the adsorption-induced reconstruction of the Au(111) surface and the drastic Raman intensity reduction of the ring breathing modes after the lifting reconstruction. As a preliminary study of the photo-induced charge transfer (PICT) mechanism, the in situ spectroscopic results obtained on single crystal surfaces are excellently illustrated with electrochemical data.