RESUMO
Photosynthetically active radiation (PAR) is typically defined as light with a wavelength within 400-700 nm. However, ultra-violet (UV) radiation within 280-400 nm and far-red (FR) radiation within 700-750 nm can also excite photosystems, though not as efficiently as PAR. Vegetation and land surface models (LSMs) typically do not explicitly account for UV's contribution to energy budgets or photosynthesis, nor FR's contribution to photosynthesis. However, whether neglecting UV and FR has significant impacts remains unknown. We explored how canopy radiative transfer (RT) and photosynthesis are impacted when explicitly implementing UV in the canopy RT model and accounting for UV and FR in the photosynthesis models within a next-generation LSM that can simulate hyperspectral canopy RT. We validated our improvements using photosynthesis measurements from plants under different light sources and intensities and surface reflection from an eddy-covariance tower. Our model simulations suggested that at the whole plant level, after accounting for UV and FR explicitly, chlorophyll content, leaf area index (LAI), clumping index, and solar radiation all impact the modeling of gross primary productivity (GPP). At the global scale, mean annual GPP within a grid would increase by up to 7.3% and the increase is proportional to LAI; globally integrated GPP increases by 4.6 PgC year-1 (3.8% of the GPP without accounting for UV + FR). Further, using PAR to proxy UV could overestimate surface albedo by more than 0.1, particularly in the boreal forests. Our results highlight the importance of improving UV and FR in canopy RT and photosynthesis modeling and the necessity to implement hyperspectral or multispectral canopy RT schemes in future vegetation and LSMs.
Assuntos
Fotossíntese , Raios Ultravioleta , Folhas de Planta/efeitos da radiação , Modelos Teóricos , Clorofila/metabolismo , Modelos Biológicos , Plantas/efeitos da radiação , Plantas/metabolismoRESUMO
Regenerating bone in the oral and maxillofacial region is clinically challenging due to the complicated osteogenic environment and the limitation of existing bone graft materials. Constructing bone graft materials with controlled degradation and stable mechanical properties in a physiological environment is of utmost importance. In this study, we used silk fibroin (SF) and polyglycolic acid (PGA) to fabricate a coaxial PGA-SF fibrous scaffold (PGA-SF-FS) to meet demands for bone grafts. The SF shell exerted excellent osteogenic activity while protecting PGA from rapid degradation and the PGA core equipped scaffold with excellent tenacity. The experiments related to biocompatibility and osteogenesis (e.g., cell attachment, proliferation, differentiation, and mineralization) demonstrated the superior ability of PGA-SF-FS to improve cell growth and osteogenic differentiation. Furthermore, in vivo testing using Sprague-Dawley rat cranial defect model showed that PGA-SF-FS accelerates bone regeneration as the implantation time increases, and its stepwise degradation helps to match the remodeling kinetics of the host bone tissue. Besides, immunohistochemical staining of CD31 and Col-1 confirmed the ability of PGA-SF-FS to enhance revascularization and osteogenesis response. Our results suggest that PGA-SF-FS fully utilizing the advantages of both components, exhibites stepwise degradation and superior tenacity in wetting regime, making it a promising candidate in the treatment of bone defects.
RESUMO
Koumiss, a traditional fermented dairy product made from fresh mare milk, is a sour beverage that contains an abundance of microbial communities, including lactic acid bacteria, yeast and others. Firstly, probiotics such as Lacticaseibacillus in koumiss can induce the secretion of immunoglobulin G in serum and interleukin-2 in the spleen while beneficial Saccharomyces can secrete antibacterial compounds such as citric acid and ascorbic acid for specific immunopotentiation. Additionally, more isoflavone in koumiss can regulate estrogen levels by binding to its receptors to prevent breast cancer directly. Bile salts can be converted into bile acids such as taurine or glycine by lactic acid bacteria to lower cholesterol levels in vivo. Butyric acid secretion would be increased to improve chronic gastrotis by regulating intestinal flora with lactic acid bacteria. Finally, SCFA and lCFA produced by Lacticaseibacillus inhibit the reproduction of pathogenic microorganisms for diarrhea prevention. Therefore, exploring the mechanisms underlying multiple physiological functions through utilizing microbial resources in koumiss represents promising avenues for ameliorating chronic diseases.
RESUMO
Aerosols can affect photosynthesis through radiative perturbations such as scattering and absorbing solar radiation. This biophysical impact has been widely studied using field measurements, but the sign and magnitude at continental scales remain uncertain. Solar-induced fluorescence (SIF), emitted by chlorophyll, strongly correlates with photosynthesis. With recent advancements in Earth observation satellites, we leverage SIF observations from the Tropospheric Monitoring Instrument (TROPOMI) with unprecedented spatial resolution and near-daily global coverage, to investigate the impact of aerosols on photosynthesis. Our analysis reveals that on weekends when there is more plant-available sunlight due to less particulate pollution, 64% of regions across Europe show increased SIF, indicating more photosynthesis. Moreover, we find a widespread negative relationship between SIF and aerosol loading across Europe. This suggests the possible reduction in photosynthesis as aerosol levels increase, particularly in ecosystems limited by light availability. By considering two plausible scenarios of improved air quality-reducing aerosol levels to the weekly minimum 3-d values and levels observed during the COVID-19 period-we estimate a potential of 41 to 50 Mt net additional annual CO2 uptake by terrestrial ecosystems in Europe. This work assesses human impacts on photosynthesis via aerosol pollution at continental scales using satellite observations. Our results highlight i) the use of spatiotemporal variations in satellite SIF to estimate the human impacts on photosynthesis and ii) the potential of reducing particulate pollution to enhance ecosystem productivity.
Assuntos
Ecossistema , Aerossóis e Gotículas Respiratórios , Humanos , Aerossóis/análise , Clorofila/análise , Poeira/análise , Fluorescência , FotossínteseRESUMO
Burgeoning commercial applications of catechol have led to its excessive accumulation in the environment, thereby posing a severe ecological threat. Bioremediation has emerged as a promising solution. The potential of the microalga Crypthecodinium cohnii to degrade catechol and use the byproduct as a carbon source was investigated in this study. Catechol significantly increased C. cohnii growth and was rapidly catabolized within 60 h of cultivation. Transcriptomic analysis highlighted the key genes involved in catechol degradation. Real-time polymerase chain reaction (RT-PCR) analysis showed that transcription of key genes CatA, CatB, and SaID involved in the ortho-cleavage pathway was remarkably increased by 2.9-, 4.2-, and 2.4- fold, respectively. Key primary metabolite content was also markedly altered, with a specific increment in polyunsaturated fatty acids. Electron microscopy and antioxidant analysis showed that C. cohnii could tolerate catechol treatment without morphological aberrations or oxidative stress. The findings provide a strategy for C. cohnii in the bioremediation of catechol and concurrent polyunsaturated fatty acids (PUFA) accumulation.
Assuntos
Dinoflagellida , Microalgas , Ácidos Docosa-Hexaenoicos/metabolismo , Microalgas/genética , Microalgas/metabolismo , Biodegradação Ambiental , Catecóis/metabolismo , Dinoflagellida/metabolismoRESUMO
Forestation is regarded as an effective strategy for increasing terrestrial carbon sequestration. However, its carbon sink potential remains uncertain due to the scarcity of large-scale sampling data and limited knowledge of the linkage between plant and soil C dynamics. Here, we conduct a large-scale survey of 163 control plots and 614 forested plots involving 25304 trees and 11700 soil samples in northern China to fill this knowledge gap. We find that forestation in northern China contributes a significant carbon sink (913.19 ± 47.58 Tg C), 74% of which is stored in biomass and 26% in soil organic carbon. Further analysis reveals that the biomass carbon sink increases initially but then decreases as soil nitrogen increases, while soil organic carbon significantly decreases in nitrogen-rich soils. These results highlight the importance of incorporating plant and soil interactions, modulated by nitrogen supply in the calculation and modelling of current and future carbon sink potential.
RESUMO
During the last two decades, inventory data show that droughts have reduced biomass carbon sink of the Amazon forest by causing mortality to exceed growth. However, process-based models have struggled to include drought-induced responses of growth and mortality and have not been evaluated against plot data. A process-based model, ORCHIDEE-CAN-NHA, including forest demography with tree cohorts, plant hydraulic architecture and drought-induced tree mortality, was applied over Amazonia rainforests forced by gridded climate fields and rising CO2 from 1901 to 2019. The model reproduced the decelerating signal of net carbon sink and drought sensitivity of aboveground biomass (AGB) growth and mortality observed at forest plots across selected Amazon intact forests for 2005 and 2010. We predicted a larger mortality rate and a more negative sensitivity of the net carbon sink during the 2015/16 El Niño compared with the former droughts. 2015/16 was indeed the most severe drought since 1901 regarding both AGB loss and area experiencing a severe carbon loss. We found that even if climate change did increase mortality, elevated CO2 contributed to balance the biomass mortality, since CO2 -induced stomatal closure reduces transpiration, thus, offsets increased transpiration from CO2 -induced higher foliage area.
Assuntos
Carbono , Secas , Biomassa , Floresta Úmida , Dióxido de CarbonoRESUMO
Global vegetation greening has been widely confirmed in previous studies, yet the changes in the velocity of green-up in each month of green-up period (GUP) remains unclear. Here, we defined the velocity of vegetation green-up as VNDVI (the monthly increase of Normalized Difference Vegetation Index [NDVI] during GUP) and further explored its response to climate change in middle-high-latitude Northern Hemisphere. We found that in early GUP, VNDVI generally showed positive trends from 1982 to 2015, whereas in late GUP, it showed negative trends in most areas. Such contrasting trends were mainly due to a positive temperature effect on VNDVI in early GUP, but this effect turned negative in late GUP. The increase of soil moisture also in part explained the accelerated vegetation green-up, especially in the arid and semi-arid ecosystems of inland areas. Our analyses also indicate that the first month of the GUP was the key stage impacting vegetation greenness in summer. Future warming may continuously speed up the early growth of vegetation, altering the seasonal trajectory of vegetation and its feedbacks to the Earth system.
Assuntos
Mudança Climática , Ecossistema , Temperatura , Estações do Ano , Solo , ChinaRESUMO
Macrophages are known to modulate the osteogenic environment of bone regeneration elicited by biological bone grafts. Alteration in certain chemical components tends to affect macrophages polarization. Comparatively to hydroxyapatite (HAp), carbonate hydroxyapatite (CHA) consists of 7.4 (wt%) carbonate ions and more closely resembles the mineral content of bone. It remains unknown whether CHA scaffolds or HA scaffolds have better osteogenic properties. In this study, we fabricated PCL/SF scaffold, PCL/SF/HAp scaffold and PCL/SF/CHA scaffold using the electrospinning technique. Despite comparable mechanical properties, the PCL/SF/CHA scaffold exhibited better osteogenic properties than the PCL/SF/HAp scaffold. Although no significant differences were observed between the two scaffolds for promoting osteoblast differentiation in vitro, the PCL/SF/CHA group appeared to be more effective at promoting bone regeneration in cranial defects in vivo. The PCL/SF/CHA scaffold was found to promote macrophage polarization toward M2 via activating the JAK/STAT5 pathway which caused a pro-osteogenic microenvironment to facilitate osteoblast differentiation. The results of this study indicated a higher potential of CHA to substitute HAp in the production of bone scaffolds for better bone regeneration.
RESUMO
The 2015/16 El Niño brought severe drought and record-breaking temperatures in the tropics. Here, using satellite-based L-band microwave vegetation optical depth, we mapped changes of above-ground biomass (AGB) during the drought and in subsequent years up to 2019. Over more than 60% of drought-affected intact forests, AGB reduced during the drought, except in the wettest part of the central Amazon, where it declined 1 y later. By the end of 2019, only 40% of AGB reduced intact forests had fully recovered to the predrought level. Using random-forest models, we found that the magnitude of AGB losses during the drought was mainly associated with regionally distinct patterns of soil water deficits and soil clay content. For the AGB recovery, we found strong influences of AGB losses during the drought and of [Formula: see text]. [Formula: see text] is a parameter related to canopy structure and is defined as the ratio of two relative height (RH) metrics of Geoscience Laser Altimeter System (GLAS) waveform data-RH25 (25% energy return height) and RH100 (100% energy return height; i.e., top canopy height). A high [Formula: see text] may reflect forests with a tall understory, thick and closed canopy, and/or without degradation. Such forests with a high [Formula: see text] ([Formula: see text] ≥ 0.3) appear to have a stronger capacity to recover than low-[Formula: see text] ones. Our results highlight the importance of forest structure when predicting the consequences of future drought stress in the tropics.
Assuntos
Biomassa , Secas , El Niño Oscilação Sul , Floresta Úmida , Solo , Clima Tropical , ÁguaRESUMO
Modification of the titanium (Ti) surface is widely known to influence biological reactions such as protein adsorption and bacterial adhesion in vivo, ultimately controlling osseointegration. In this study, we sought to investigate the correlation of protein adsorption and bacterial adhesion with the nanoporous structure of acid-alkali-treated Ti implants, shedding light on the modification of Ti implants to promote osseointegration. We fabricated nontreated porous Ti (NTPT) by powder metallurgy and immersed it in mixed acids and NaOH to obtain acid-alkali-treated porous Ti (AAPT). Nontreated dense sample (NTDT) served as control. Our results showed that nanopores were formed after acid-alkali treatment. AAPT showed a higher specific surface area and became much more hydrophilic than NTPT and NTDT (p < 0.001). Compared to dense samples, porous samples exhibited a lower zeta potential and higher adsorbed protein level at each time point within 120 min (p < 0.001). AAPT formed a thicker protein layer by serum precoating than NTPT and NTDT (p < 0.001). The main adsorbed proteins on AAPT and NTPT were albumin, α1 antitrypsin, transferrin, apolipoprotein A1, complement C3 and haptoglobin α1 chain. The amounts of bacteria adhering to the serum-precoated samples were lower than those adhering to the nonprecoated samples (p < 0.05). Lower-molecular-weight proteins showed higher affinity to porous Ti. In conclusion, acid-alkali treatment facilitated protein adsorption by porous Ti, and the protein coating tended to prevent bacteria from adhering. These findings may be utilized for Ti implant modification aimed at reducing bacterial adhesion and enhancing osseointegration. Graphical abstract.
Assuntos
Ácidos , Álcalis , Aderência Bacteriana/efeitos dos fármacos , Proteínas Sanguíneas/química , Streptococcus mutans/efeitos dos fármacos , Titânio/química , Aderência Bacteriana/fisiologia , Materiais Biocompatíveis , Streptococcus mutans/fisiologia , Propriedades de SuperfícieRESUMO
Resolving regional carbon budgets is critical for informing land-based mitigation policy. For nine regions covering nearly the whole globe, we collected inventory estimates of carbon-stock changes complemented by satellite estimates of biomass changes where inventory data are missing. The net land-atmospheric carbon exchange (NEE) was calculated by taking the sum of the carbon-stock change and lateral carbon fluxes from crop and wood trade, and riverine-carbon export to the ocean. Summing up NEE from all regions, we obtained a global 'bottom-up' NEE for net land anthropogenic CO2 uptake of -2.2 ± 0.6 PgC yr-1 consistent with the independent top-down NEE from the global atmospheric carbon budget during 2000-2009. This estimate is so far the most comprehensive global bottom-up carbon budget accounting, which set up an important milestone for global carbon-cycle studies. By decomposing NEE into component fluxes, we found that global soil heterotrophic respiration amounts to a source of CO2 of 39 PgC yr-1 with an interquartile of 33-46 PgC yr-1-a much smaller portion of net primary productivity than previously reported.
RESUMO
To find out the optimal porosity and pore size of porous titanium (Ti) regarding the cytocompatibility and osteogenic differentiation. Six groups of porous Ti samples with different porosities and pore sizes were fabricated by the powder metallurgy process. The microstructure and compressive mechanical properties were characterized. The cytocompatibility was examined by a series of biological tests as protein absorption with BCA assay kit, cell attachment with laser scanning confocal microscopy and vinculin expression, cell proliferation with CCK-8 assay. Cell differentiation and calcification were detected by qPCR and Alizarin Red S dying respectively. Pores distributed homogeneously throughout the porous Ti samples. The compressive test results showed that Young's modulus ranged from 2.80 ± 0.03 GPa to 5.43 ± 0.34 GPa and the compressive strength increased from 112.4 ± 3.6 MPa to 231.1 ± 9.4 MPa. Porous Ti with high porosity (53.3 ± 1.2%) and small pore size (191.6 ± 3.7 µm) adsorbed more proteins. More MC3T3-E1 cells adhered onto dense Ti samples than onto any other porous ones already after culture and no difference was identified within the porous groups. The porous structure of porous Ti with a porosity of 53.3 ± 1.2% and an average pore size of 191.6 ± 3.7 µm facilitated cell differentiation and calcification. Small pores were not beneficial to the osteo-initiation at the very beginning. Porous Ti with a porosity of 53.3 ± 1.2% and an average pore size of 191.6 ± 3.7 µm fabricated by powder metallurgy process showed the expected mechanical property and improved osseointegration as implants in dental treatment.
Assuntos
Força Compressiva , Teste de Materiais/métodos , Osteogênese/efeitos dos fármacos , Titânio/química , Células 3T3 , Adsorção , Ligas/química , Animais , Materiais Biocompatíveis/química , Diferenciação Celular/efeitos dos fármacos , Proliferação de Células , Células Cultivadas , Módulo de Elasticidade , Camundongos , Osseointegração/efeitos dos fármacos , Porosidade , Estresse MecânicoRESUMO
Escherichia coli represents one of the most widely used hosts for recombinant protein production, but its limited capacity for producing extracellular proteins is often cited as a drawback. NJ7G_0991 is an extracellular protein of the haloarchaeon Natrinema sp. J7-2 and comprises a signal peptide, a putative LolA-like domain, and a C-terminal domain of unknown function. Here, we found that the full-length (0991) and the C-terminal domain-deletion variant (0991ΔC) of NJ7G_0991, but not its signal peptide-deletion variant (0991ΔS), were efficiently released into the culture supernatant of E. coli without extensive cell lysis as determined by ß-galactosidase activity assay. After lysozyme treatment, E. coli cells producing 0991 or 0991ΔC, but not 0991ΔS, were converted from rod-shaped forms to spheres, suggesting that the secretion of 0991 or 0991ΔC into the periplasm leads to an increase of outer membrane permeability of E. coli. A pelB signal peptide was fused to the N-terminus of the LolA-like domain, and the resulting variant PelB-0991ΔC could be released into the culture supernatant of E. coli more efficiently than 0991ΔC. By using PelB-0991ΔC as a co-expression partner, the extracellular production level of a recombinant thermostable subtilase WF146 could be enhanced by up to 14-fold, and the extracellular concentration of an active site variant of WF146 (WF146-SA) reached up to 129 mg/l. To the best of our knowledge, this is the first report on archaeal protein-based co-expression system for extracellular production of recombinant proteins in E. coli. KEY POINTS: ⢠The haloarchaeal protein NJ7G_0991 can be efficiently released into the culture supernatant of E. coli. ⢠The recombinant NJ7G_0991 increases the outer membrane permeability of E. coli. ⢠The LolA-like domain of NJ7G_0991 can be used as a co-expression partner to improve extracellular production of recombinant proteins in E. coli.
Assuntos
Proteínas de Escherichia coli , Proteínas Periplásmicas de Ligação , Permeabilidade da Membrana Celular , Escherichia coli/genética , Escherichia coli/metabolismo , Proteínas de Escherichia coli/genética , Periplasma/metabolismo , Sinais Direcionadores de Proteínas , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismoRESUMO
A significant, fundamental challenge in the field of valleytronics is how to generate and regulate valley-polarized currents in practical ways. Here, we discover a new mechanism for producing valley polarization in a monolayer transition metal dichalcogenide superlattice, in which valley-resolved gaps are formed at the supercell Brillouin zone boundaries and centers due to intervalley scattering. When the incident energy of the electron lies in the gaps, the available states are valley polarized, thus providing a valley-polarized current from the superlattice. We show that the direction and strength of the valley polarization may be further tuned by varying the potential applied to the superlattice. The transmission can have a net valley polarization of 55% for a four-period heterostructure. Moreover, two such valley filters in series may function as an electrostatically controlled giant valleyresistance device, representing a zero-magnetic field counterpart to the familiar giant magnetoresistance device.
RESUMO
Due to the excellent restoration of masticatory function, satisfaction on aesthetics and other superiorities, dental implants represent an effective method to resolve tooth losing and damaging. Current dental implant systems still have problems waiting to be addressed, and problems are centralized on the materials of implant bodies. This review aims to summarize major developments in the field of dental implant materials, starting with an overview on structures, procedures of dental implants and challenges of implant materials. Next, implant materials are examined in three categories, that is, metals, ceramics, and polymers, their mechanical properties, biocompatibility, and bioactivity are summarized. And as an important aspect, strategies of surface modification are also reviewed, along with some finite element analysis to guiding the research direction of implant materials. Finally, the conclusive remarks are outlined to provide an outlook on the future research directions and prospects of dental implants.
Assuntos
Implantes Dentários , Materiais Dentários/química , Materiais Biocompatíveis/química , Materiais Biocompatíveis/uso terapêutico , Materiais Dentários/uso terapêutico , Análise de Elementos Finitos , Humanos , Teste de Materiais , Desenho de PróteseRESUMO
Metal-based implants possess excellent mechanical strength, corrosion resistance, and biocompatibility and can deliver favorable performances in clinic treatments. However, modulus mismatching is considered a common defect for metal-based materials, while polymer-based materials with a bonelike elastic modulus have been regarded as one of the most promising candidates for bone replacement implants. In this work, a phosphonic acid- and fluorine-containing poly(aryl ether) (PAE) resin is designed and synthesized, which is determined to be an amorphous polymer with excellent thermostability. The elastic modulus of composites is improved to 15.7 GPa by reinforcing with 60 wt % hydroxyapatite (HA), which demonstrates admirable protein adsorption and hydrophilicity. After 14 days of immersion in simulated body fluid, a layer of HA deposition can be observed, indicating favorable bioactivity in advance, and the preliminary in vitro cell experiments also suggest that PAE-HA composites possess favorable cell responses on adhesion, proliferation, and differentiation, which reveal the feasibility of synthesized polymers to be employed as bone replacement materials, while the adjustability in molecular chains also leaves room for further investigations.
RESUMO
BACKGROUND: To elucidate the bioactivity and bone regeneration of porous titanium surfaces treated using acid-alkali combination, and to define the optimal alkali reaction time. METHODS: Ten groups of porous Ti with at least 3 per group undergoing different acid-alkali treated time were prepared. The surface was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), bicinchoninic acid method (BCA), optical contact angle measurement and Raman spectrometry. Compression testing was performed with a universal testing machine. The bioactivity and osteoinduction were evaluated by a series of biological tests using a simulated body fluid (SBF) test, cell proliferation test, vinculin, ALP and OCN expression, and cell mineralization. RESULTS: The acid-alkali treatment formed micro- and nano-scale structures on the sample surfaces. The alkali treatment for 12â¯h achieved the sharpest nano-scale surface relief and the most protein absorption. The treated porous surface was coated with a NaHTiO3 layer. The acid-alkali etching did not compromise the elastic modulus and compressive strength of the porous Ti samples. In addition to hydroxyapatite, a perovskite phase was also formed on the treated porous samples in SBF. Non-treated dense Ti showed more cell adhesion and proliferation (Pâ¯<â¯0.05), while osteoinduction and mineralization were more pronounced on the treated porous sample (Pâ¯<â¯0.05). CONCLUSION: Acid-alkali treatment is an effective means of generating nano-scale relief on porous Ti surface, and is beneficial for bioactivity and bone regeneration. The 15â¯min acid and 12â¯h alkali etching is the optimal combination. The osteoinductive efficacy may be attributable to the surface physical chemistry and the formation of hydroxyapatite and perovskite layers, rather than direct cell adhesion and proliferation.
Assuntos
Materiais Biocompatíveis/farmacologia , Osseointegração/efeitos dos fármacos , Hidróxido de Sódio/farmacologia , Ácidos Sulfúricos/farmacologia , Titânio/farmacologia , Adsorção , Fosfatase Alcalina/metabolismo , Animais , Proteínas Sanguíneas/metabolismo , Calcificação Fisiológica/efeitos dos fármacos , Cálcio/química , Diferenciação Celular/efeitos dos fármacos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Forma Celular , Força Compressiva , Camundongos , Osteocalcina/metabolismo , Osteogênese/efeitos dos fármacos , Porosidade , Espectrometria por Raios X , Análise Espectral Raman , Propriedades de Superfície , ÁguaRESUMO
To study the effects of polyethylene glycol (PEG) content on the mechanical properties and degradation of silk fibroin, nano-hydroxyapatite, and PEG (SF/nHAP/PEG) electrospun scaffolds, and according to the PEG ratio in the scaffold (SF : nHAP : PEG), test groups were divided as follows: PEG-0 (10 : 2), PEG-0.5 (10 : 2 : 0.5), PEG-1 (10 : 2 : 1), and PEG-2 (10 : 2 : 2). A series of tests to determine the mechanical properties, degradation rates, and osteogenic characteristics was undertaken. PEG facilitated SF degradation (PEG-1 > PEG-0.5 > PEG-0 > PEG-2), and the mass loss of the scaffolds in PEG-1 was more than 30%, while in PEG-2 it was less than 20% after 8 days (P < 0.05). The addition of PEG strengthened the mechanical properties of the scaffold (PEG-1 > PEG-2 > PEG-0.5 > PEG-0), as the Young's modulus increased from 41.72 ± 3.40 MPa for PEG-0 to 76.12 ± 3.73 MPa for PEG-1 (P < 0.05). PEG was favorable for the osteogenic differentiation of BMSCs (PEG-0.5 > PEG-1 > PEG-2 > PEG-0). The enhancements were attributable to the increased hydrophilicity and nHAP dispersion, as well as to the secondary structure transformation of SF. The PEG content was deemed to be optimal when the SF/nHAP/PEG ratio was equal to 10 : 2 : 1.