AgNPs with CNTs to construct multifunctional flexible sensor with dual conductive network structure.

Flexible sensors play an important role in the field of smart devices. However, most flexible sensors suffer from poor sensing signal stability and monofunction. In this study, a multifunctional film (named PM) with dual conductive network structure was fabricated by nanocellulose crystal dispersed with silver nanoparticles and carbon nanotube. The PM film exhibited excellent conductivity (24.6 S/m) along with antimicrobial effects against Staphylococcus aureus and Escherichia coli. Furthermore, the PM sensor showed excellent electrothermal performance, reaching 133.1 °C within 50 s at 12 V, and an excellent temperature coefficient of resistance (TCR = -0.65 % °C-1) over a temperature range of 36-124 °C. More importantly, the PM sensor demonstrated a high strain sensitivity (GF = 1.66) and durability (320 cycles), capable of detecting minute human body movements at a strain as low as 1 %. Additionally, the PM sensor maintained a stable sensing performance even after 30 d of exposure to air. Therefore, the multifunctional integration of the PM sensor shows great potential for application in the field of flexible electronics.

A nanocomposite hydrogel loaded with Ag nanoparticles reduced by aloe vera polysaccharides as an antimicrobial multifunctional sensor.

Developing high-performance hydrogels with anti-freeze, and antimicrobial properties is crucial for the practical application of flexible sensors. In this study, we prepared silver nanoparticles (AgNPs) with aloe polysaccharide (AP) as a reducing agent. Then, the AP/AgNPs were added to a system of polyvinyl alcohol and borax crosslinked in water/glycerol to obtain a multifunctional conductive hydrogel. The incorporated AgNPs improved the conductivity (0.39 S/m) and mechanical properties (elongation at break: 732.9 %, fracture strength: 1267.6 kPa) of the hydrogel. In addition, resultant hydrogel exhibited potential for sensing strain, temperature, and humidity. When used as a strain sensor, the hydrogel system exhibited low detection limit (0.1 %), and fast response (0.08 s). The resistance of the hydrogel decreased with an increase in the absorbed moisture content, enabling humidity detection (25-95 %) to monitor breathing status. As a temperature sensor, the hydrogel supported a wide detection range (-50 to +90 °C) and sensitivity (-30-0 °C, temperature coefficient of resistance (TCR) = -5.64 %/°C) to detect changes in the ambient temperature. This study proposes a simple method for manufacturing multifunctional hydrogel sensors, which broadens their application prospects in wearable sensing and electronic products.

A nanocellulose-based flexible multilayer sensor with high sensitivity to humidity and strain response for detecting human motion and respiration.

Biomass-based flexible sensors with excellent mechanical and sensing properties have attracted significant attention. In this study, based on the excellent dispersibility and degradability of nanocellulose crystals, we designed a polyvinyl alcohol/nanocellulose crystals/phytic acid (PCP) composite film with good flexibility and high sensitivity to humidity. A layer of multiwalled carbon nanotubes (MWCNT) and nanocellulose crystals (CNC) was further sandwiched between two PCP layers as a flexible multifunctional sensor (PCPW) to detect human movement and respiration. Phytic acid contains abundant phosphate groups that enhance proton conduction, allowing the PCPW composite film to change its electrical resistance in a sensitive and repeatable manner when the relative humidity was varied between 35 %-93 %. Meanwhile, CNC derived from sisal fibers enhanced the PCPW sensor's conductivity (3.3 S/m) and mechanical properties (elongation at break: 99 %) by improving the dispersion and connectivity of MWCNT. The PCPW sensor displayed a high sensitivity to strain (gauge factor: 49.5) and could monitor both facial expressions (smiling and winking) and the bending of joints. The sensor also generated stable electrical responses during breathing and blowing due to the change in humidity. Therefore, this biodegradable and multifunctional sensor has good application prospects.

In situ reduction of Ag nanoparticles using okra polysaccharides for the preparation of flexible multifunctional sensors.

This paper reports the fabrication of flexible films loaded with Ag nanoparticles (Ag NPs) and annotated as POPA films from polyvinyl alcohol, okra polysaccharides, phytic acid, and AgNO3 via an in situ reduction and solution-casting method. The prepared films exhibit strain, temperature, and humidity sensing. As a flexible strain sensor, the POPA sensor has a wide strain sensing range (1-250 %), and fast response/recovery (0.22/0.28 s), while as a temperature sensor, it senses the human body temperature and exhibits excellent temperature sensitivity (TCR = -1.401 % °C-1) and good linearity (R2 = 0.994) in the temperature range of 30-55 °C. Additionally, in the relative humidity (RH) of range 35-95 %, the POPA humidity sensor outputs stable electrical signals during adsorption and desorption. Moreover, it exhibits low hysteresis values (3.19 % RH) and good linearity (R2 = 0.989) for the detection of breathing rates during different human body states. Consequently, the POPA sensor exhibits good stability, repeatability, and reversibility for strain, temperature, and humidity sensing. The designed multifunctional POPA sensor thus holds great potential for its application in flexible wearable devices and electronics.