A Recyclable Ionogel with High Mechanical Robustness Based on Covalent Adaptable Networks.

Ionogels are an emerging class of soft materials for flexible electronics, with high ionic conductivity, low volatility, and mechanical stretchability. Recyclable ionogels are recently developed to address the sustainability crisis of current electronics, through the introduction of non-covalent bonds. However, this strategy sacrifices mechanical robustness and chemical stability, severely diminishing the potential for practical application. Here, covalent adaptable networks (CANs) are incorporated into ionogels, where dynamic covalent crosslinks endow high strength (11.3 MPa tensile strength), stretchability (2396% elongation at break), elasticity (energy loss coefficient of 0.055 at 100% strain), and durability (5000 cycles of 150% strain). The reversible nature of CANs allows the ionogel to be closed-loop recyclable for up to ten times. Additionally, the ionogel is toughened by physical crosslinks between conducting ions and polymer networks, breaking the common dilemma in enhancing mechanical properties and electrical conductivity. The ionogel demonstrates robust strain sensing performance under harsh mechanical treatments and is applied for reconfigurable multimodal sensing based on its recyclability. This study provides insights into improving the mechanical and electrical properties of ionogels toward functionally reliable and environmentally sustainable bioelectronics.

Dynamic Covalent Bonds Enabled Carbon Fiber Reinforced Polymers Recyclability and Material Circularity.

Due to their remarkable features of lightweight, high strength, stiffness, high-temperature resistance, and corrosion resistance, carbon fiber reinforced polymers (CFRPs) are extensively used in sports equipment, vehicles, aircraft, windmill blades, and other sectors. The urging need to develop a resource-saving and environmentally responsible society requires the recycling of CFRPs. Traditional CFRPs, on the other hand, are difficult to recycle due to the permanent covalent crosslinking of polymer matrices. The combination of covalent adaptable networks (CANs) with carbon fibers (CFs) marks a new development path for closed-loop recyclable CFRPs and polymer resins. In this review, we summarize the most recent developments of closed-loop recyclable CFRPs from the unique paradigm of dynamic crosslinking polymers, CANs. These sophisticated materials with diverse functions, oriented towards CFs recycling and resin sustainability, are further categorized into several active domains of dynamic covalent bonds, including ester bonds, imine bonds, disulfide bonds, boronic ester bonds, and acetal linkages, etc. Finally, the possible strategies for the future design of recyclable CFPRs by combining dynamic covalent chemistry innovation with materials interface science are proposed.

Innovative biomaterials for food packaging: Unlocking the potential of polyhydroxyalkanoate (PHA) biopolymers.

Polyhydroxyalkanoate (PHA) biopolyesters show a good balance between sustainability and performance, making them a competitive alternative to conventional plastics for ecofriendly food packaging. With an emphasis on developments over the last decade (2014-2024), this review examines the revolutionary potential of PHAs as a sustainable food packaging material option. It also delves into the current state of commercial development, competitiveness, and the carbon footprint associated with PHA-based products. First, a critical examination of the challenges experienced by PHAs in terms of food packaging requirements is undertaken, followed by an assessment of contemporary strategies addressing permeability, mechanical properties, and processing considerations. The various PHA packaging end-of-life options, including a comprehensive overview of the environmental impact and potential solutions will also be discussed. Finally, conclusions and future perspectives are elucidated with a view of prospecting PHAs as future green materials, with a blend of performance and sustainability of food packaging solutions.

Reprogrammable, Sustainable, and 3D-Printable Cellulose Hydroplastic.

Modern human societies are highly dependent on plastic materials, however, the bulk of them are non-renewable commodity plastics that cause pollution problems and consume large amounts of energy for their thermal processing activities. In this article, a sustainable cellulose hydroplastic material and its composites, that can be shaped repeatedly into various 2D/3D geometries using just water are introduced. In the wet state, their high flexibility and ductility make it conducive for the shaping to take place. In the ambient environment, the wet hydroplastic transits spontaneously into rigid materials with its intended shape in a short time of <30 min despite a thickness of hundreds of microns. They also possess humidity resistance and are structurally stable in highly humid environments. Given their excellent mechanical properties, geometry reprogrammability, bio-based, and biodegradable nature, cellulose hydroplastic poses as a sustainable alternative to traditional plastic materials and even "green" thermoplastics. This article also demonstrates the possibility of 3D-printing these hydroplastics and the potential of employing them in electronics applications. The demonstrated hydroshapable structural electronic components show capability in performing electronic functions, load-bearing ability and geometry versatility, which are attractive features for lightweight, customizable and geometry-unique electronic devices.

Bio-Polyethylene and Polyethylene Biocomposites: An Alternative toward a Sustainable Future.

Polyethylene (PE), a highly prevalent non-biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio-based PE (bio-PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio-PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio-PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio-PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio-PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio-PE biocomposites. In summary, production of PE and bio-PE biocomposites can contribute to a cleaner and sustainable future.

In-situ forming dynamic covalently crosslinked nanofibers with one-pot closed-loop recyclability.

Polymeric nanofibers are attractive nanomaterials owing to their high surface-area-to-volume ratio and superior flexibility. However, a difficult choice between durability and recyclability continues to hamper efforts to design new polymeric nanofibers. Herein, we integrate the concept of covalent adaptable networks (CANs) to produce a class of nanofibers ⎯ referred to dynamic covalently crosslinked nanofibers (DCCNFs) via electrospinning systems with viscosity modulation and in-situ crosslinking. The developed DCCNFs possess homogeneous morphology, flexibility, mechanical robustness, and creep resistance, as well as good thermal and solvent stability. Moreover, to solve the inevitable issues of performance degradation and crack of nanofibrous membranes, DCCNF membranes can be one-pot closed-loop recycled or welded through thermal-reversible Diels-Alder reaction. This study may unlock strategies to fabricate the next generation nanofibers with recyclable features and consistently high performance via dynamic covalent chemistry for intelligent and sustainable applications.

Ionogels: recent advances in design, material properties and emerging biomedical applications.

Ionic liquid (IL)-based gels (ionogels) have received considerable attention due to their unique advantages in ionic conductivity and their biphasic liquid-solid phase property. In ionogels, the negligibly volatile ionic liquid is retained in the interconnected 3D pore structure. On the basis of these physical features as well as the chemical properties of well-chosen ILs, there is emerging interest in the anti-bacterial and biocompatibility aspects. In this review, the recent achievements of ionogels for biomedical applications are summarized and discussed. Following a brief introduction of the various types of ILs and their key physicochemical and biological properties, the design strategies and fabrication methods of ionogels are presented by means of different confining networks. These sophisticated ionogels with diverse functions, aimed at biomedical applications, are further classified into several active domains, including wearable strain sensors, therapeutic delivery systems, wound healing and biochemical detections. Finally, the challenges and possible strategies for the design of future ionogels by integrating materials science with a biological interface are proposed.

Thermoelectric Silver-Based Chalcogenides.

Heat is abundantly available from various sources including solar irradiation, geothermal energy, industrial processes, automobile exhausts, and from the human body and other living beings. However, these heat sources are often overlooked despite their abundance, and their potential applications remain underdeveloped. In recent years, important progress has been made in the development of high-performance thermoelectric materials, which have been extensively studied at medium and high temperatures, but less so at near room temperature. Silver-based chalcogenides have gained much attention as near room temperature thermoelectric materials, and they are anticipated to catalyze tremendous growth in energy harvesting for advancing internet of things appliances, self-powered wearable medical systems, and self-powered wearable intelligent devices. This review encompasses the recent advancements of thermoelectric silver-based chalcogenides including binary and multinary compounds, as well as their hybrids and composites. Emphasis is placed on strategic approaches which improve the value of the figure of merit for better thermoelectric performance at near room temperature via engineering material size, shape, composition, bandgap, etc. This review also describes the potential of thermoelectric materials for applications including self-powering wearable devices created by different approaches. Lastly, the underlying challenges and perspectives on the future development of thermoelectric materials are discussed.

Concepts and Emerging Trends for Structural Battery Electrolytes.

The structural battery is a multifunctional energy storage device that aims to address the weight and volume efficiency issues that conventional batteries face, especially in electric transportation. By combining the functions of mechanical load bearing and energy storage, structural batteries can reduce the reliance on, or even eventually replace the main power source in an electric vehicle or a drone. However, one of the key challenges to be addressed before achieving multifunctionality in structural batteries would be the design of a suitable multifunctional structural battery electrolyte. The structural battery electrolyte is the constituent that provides mechanical integrity under flexural loads or impact and hence determines the electrochemical and much of the mechanical performance of a structural battery device. This concept paper aims to cover the key considerations and challenges facing the design of structural battery electrolytes. In addition, the main approaches to surmount these challenges are highlighted, keeping design aspects like sustainability and recyclability in view.

Oxygen self-supplied enzyme nanogels for tumor targeting with amplified synergistic starvation and photodynamic therapy.

Tumor tissues need vast supply of nutrients and energy to sustain the rapid proliferation of cancer cells. Cutting off the glucose supply represents a promising cancer therapy approach. Herein, a tumor tissue-targeted enzyme nanogel (rGCP nanogel) with self-supply oxygen capability was developed. The enzyme nanogel synergistically enhanced starvation therapy and photodynamic therapy (PDT) to mitigate the rapid proliferation of cancer cells. The rGCP nanogel was fabricated by copolymerizing two monomers, porphyrin and cancer cells-targeted, Arg-Gly-Asp (RGD), onto the glucose oxidase (GOX) and catalase (CAT) surfaces. The cascade reaction within the rGCP nanogel could efficiently consume intracellular glucose catalyzed by GOX. Concurrently, CAT safely decomposed the produced H2O2 with systemic toxicity to promote oxygen generation and achieved low toxicity starvation therapy. The produced oxygen subsequently facilitated the glucose oxidation reaction and significantly enhanced the generation of cytotoxic singlet oxygen (1O2) in the presence of 660 nm light irradiation. Combining starvation therapy and PDT, the designed enzyme nanogel system presented an amplified synergic cancer therapy effect. This approach potentially paved a new way to fabricate a combinatorial therapy approach by employing cascaded catalytic nanomedicines with good tumor selectivity and efficient anti-cancer effect. STATEMENT OF SIGNIFICANCE: The performance of starvation and photodynamic therapy (PDT) is usually suppressed by intrinsic tumorous hypoxia. Herein, an oxygen self-supplied and tumor tissue-targeted enzyme nanogel was created by copolymerization of two monomers, porphyrin and cancer cell-targeted Arg-Gly-Asp (RGD), onto the surface of glucose oxidase (GOX) and catalase (CAT), which synergistically enhanced starvation therapy and PDT. Moreover, the enzyme nanogels possessed high stability and could be synthesized straightforwardly. This anti-cancer system provides an approach for constructing a combinatorial therapy approach by employing cascaded catalytic nanomedicine with good tumor selectivity and therapeutic efficacy.

Temperature and pH Responsive Light-Harvesting System Based on AIE-Active Microgel for Cell Imaging.

A highly emissive microgel is synthesized by polymerizing tetraphenylethene (TPE) based comonomers, acrylic acid, NIPAM, and permanent crosslinker ethylenebisacrylamide (BIS) (named as TPE microgel), which exhibited temperature responsive fluorescence emission. Rhodamine B (RhB), a positively charged molecule, is then inserted onto the surface of fabricated microgels through electrostatic interaction. As a result, a novel artificial light harvesting system with high energy transfer efficiency is constructed (named as TPE microgel-RhB light harvesting system), which is the first light harvesting system based on TPE microgels presenting dual response to pH and temperature. MTT assay indicates the fabricated TPE microgel and TPE microgel-RhB light harvesting system has good cytocompatibility. The strong fluorescence and good cytocompatibility make them perfect candidates for cell imaging. The prepared emissive microgel and light-harvesting system with desirable fluorescent property not only provide a new strategy for the fabrication of tunable luminescent nanomaterials, but also expand potential applications in the fields of stomach recognition, temperature sensors, and drug delivery.

Engineering luminescent pectin-based hydrogel for highly efficient multiple sensing.

Luminescent hydrogels with sensing capabilities have attracted much interest in recent years, especially those responsive to stimuli, making such materials potential for various applications. Pectin is a high-molecular-weight carbohydrate polymer that has the ability to form hydrogel upon heating or mixing with divalent cations. However, intrinsic pectin gels are weak and lack of functionalities. In this study, lanthanide ions and silk fibroin derived carbon dots were incorporated into Pectin/PVA hydrogel (PPH) to form luminescent tough hydrogels. The luminescence of the hydrogel can be tuned by adjusting the ratio of blue emission carbon dots to Eu3+ ions (red emission) and Tb3+ ions (green emission). Such incorporation of emitters only slightly changed the mechanical properties of the tough hydrogel. Notably, the luminescent Pectin/PVA hydrogel (LPPH) showed chromic response to external stimuli, like pH and metal ions. By measuring the ratio of luminescent intensity at 473 nm and 617 nm (I473/I617), the pH response can be quantified in high sensitivity. In addition, the specific detection of Cu2+ and Fe3+ ions using the fabricated hydrogel were demonstrated, the mechanism was also proposed. The different chromic responses to Fe2+ and Fe3+ endow the luminescent tough Pectin/PVA hydrogel potential for multiple sensing applications.

Recent advances in the development of biodegradable PHB-based toughening materials: Approaches, advantages and applications.

Polyhydroxybutyrate (PHB) is a natural biodegradable polymer that is produced by many types of bacteria as an intracellular energy storage material. Due to its numerous advantages such as biodegradability, biocompatibility, availability and with physical properties comparable to petroleum-based thermoplastics, PHB is a potential substitute in biomedical and packaging fields. However, several physical drawbacks, such as high production cost, thermal instability, and poor mechanical properties, due to secondary crystallization and slow nucleation rate, limit its competition with traditional plastics in industrial and biomedical applications. Thereby, many attempts have been employed to improve the material performance of toughened PHB so as to achieve greater competitiveness and sustainability. In this review, the most recent developments of PHB-based toughening materials are discussed with respect to their approaches and strategies, which includes: drawing and thermal treatment, blending with materials from natural sources and synthetic polymers, as well as forming reinforced composites with natural fibers and inorganic fillers. The alternation of PHB chemical structure to form various types of functional copolymers with enhanced materials performance is also summarized. The expanded utilization of these newly developed sophisticated PHB materials as engineering materials and the biomedical significance in different domains are also addressed.