One-dimensional van der Waals stacked p-type crystal Ta2Pt3Se8 for nanoscale electronics.

Recently, ternary transition metal chalcogenides Ta2X3Se8 (X = Pd or Pt) have attracted great interest as a class of emerging one-dimensional (1D) van der Waals (vdW) materials. In particular, Ta2Pd3Se8 has been actively studied owing to its excellent charge transport properties as an n-type semiconductor and ultralong ballistic phonon transport properties. Compared to subsequent studies on the Pd-containing material, Ta2Pt3Se8, another member of this class of materials has been considerably less explored despite its promising electrical properties as a p-type semiconductor. Herein, we demonstrate the electrical properties of Ta2Pt3Se8 as a promising channel material for nanoelectronic applications. High-quality bulk Ta2Pt3Se8 single crystals were successfully synthesized by a one-step vapor transport reaction. Scanning Kelvin probe microscopy measurements were used to investigate the surface potential difference and work function of the Ta2Pt3Se8 nanoribbons of various thicknesses. Field-effect transistors fabricated on exfoliated Ta2Pt3Se8 nanoribbons exhibited moderate p-type transport properties with a maximum hole mobility of 5 cm2 V-1 s-1 and an Ion/Ioff ratio of >104. Furthermore, the charge transport mechanism of Ta2Pt3Se8 was analyzed by temperature-dependent transport measurements in the temperature range from 90 to 320 K. To include Ta2Pt3Se8 in a building block for modern 1D electronics, we demonstrate p-n junction characteristics using the electron beam doping method.

High Breakdown Current Density in Quasi-1D van der Waals Layered Material Ta2NiSe7.

We synthesized ternary composition chalcogenide Ta2NiSe7, a quasi-one-dimensional (Q1D) material with excellent crystallinity. To utilize the excellent electrical conductivity property of Ta2NiSe7, the breakdown current density (JBD) according to thickness change through mechanical exfoliation was measured. It was confirmed that as the thickness decreased, the maximum breakdown voltage (VBD) increased, and at 18 nm thickness, 35 MA cm-2 of JBD was measured, which was 35 times higher than that of copper, which is commonly used as an interconnect material. By optimization of the exfoliation process, it is expected that through a theoretical model fitting, the JBD can be increased to about 356 MA cm-2. It is expected that the low-dimensional materials with ternary compositions proposed through this experiment can be used as candidates for current-carrying materials that are required for the miniaturization of various electronic devices.

Ta2 Ni3 Se8 : 1D van der Waals Material with Ambipolar Behavior.

In this study, high-purity and centimeter-scale bulk Ta2 Ni3 Se8 crystals are obtained by controlling the growth temperature and stoichiometric ratio between tantalum, nickel, and selenium. It is demonstrated that the bulk Ta2 Ni3 Se8 crystals could be effectively exfoliated into a few chain-scale nanowires through simple mechanical exfoliation and liquid-phase exfoliation. Also, the calculation of electronic band structures confirms that Ta2 Ni3 Se8 is a semiconducting material with a small bandgap. A field-effect transistor is successfully fabricated on the mechanically exfoliated Ta2 Ni3 Se8 nanowires. Transport measurements at room temperature reveal that Ta2 Ni3 Se8 nanowires exhibit ambipolar semiconducting behavior with maximum mobilities of 20.3 and 3.52 cm2 V-1 s-1 for electrons and holes, respectively. The temperature-dependent transport measurement (from 90 to 295 K) confirms the carrier transport mechanism of Ta2 Ni3 Se8 nanowires. Based on these characteristics, the obtained 1D vdW material is expected to be a potential candidate for additional 1D materials as channel materials.