Simultaneous removal of ammonia and sulfur odorants in biotrickling filters and N2O production.

Research on the stability evaluation of biotrickling filters (BTFs) under harsh conditions and the bacterial adaptation process still needs to be improved. Herein, BTFs with polypropylene plastic (PP) and ceramic raschig rings (CRR) were investigated for a better understanding of the biodegradation of ammonia (NH3), hydrogen sulfide (H2S), and dimethyl sulfide (DMS). The results showed an excellent performance in removal efficiency (RE) for NH3 (91.6 %-99.9 %), H2S (RE: 55.3 %-99.5 %), and DMS (RE: 10.6 %-99.9 %). It was found that a more apparent positive correlation between N2O emission and pressure drop in CRR BTF (R2 = 0.92) than in PP BTF (R2 = 0.79) (P < 0.01). Low temperature promotes an increase in the abundance ofComamonasandBacillus. The polysaccharides in PP and CRR reactors decreased by 78.6 % and 68.1 % when temperature reduced from 25℃ to 8℃. This work provides a novel insight into understanding bacterial survival under harsh BTF environments.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell.

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

Boosting o-xylene removal and power generation in an airlift microbial fuel cell system.

Microbial fuel cells (MFCs) are widely acknowledged to be a promising eco-friendly abatement technology of pollutants, and are capable of generating electricity. However, the poor mass transfer and reaction rate in MFCs significantly decrease their treatment capacity for contaminants, especially hydrophobic substances. The present work developed a novel MFC integrated with an airlift (ALR) reactor using a polypyrrole modified anode to promote the bioaccessibility of gaseous o-xylene and attachment of microorganisms. The results indicated that the established ALR-MFC system showed excellent elimination capability, with removal efficiency exceeding 84% even at high o-xylene concentration (1600 mg m-3). The maximum output voltage of 0.549 V and power density of 13.16 mW m-2 obtained by the Monod-type model were approximately twice and sixfold higher than that of a conventional MFC, respectively. According to the microbial community analysis, the superior performances of the ALR-MFC in terms of o-xylene removal and power generation were mainly ascribed to the enrichment of degrader (i.e. Shinella) and electrochemical active bacteria (i.e. Proteiniphilum). Moreover, the electricity generation of the ALR-MFC did not decrease at a high O2 concentration, as O2 was conducive to o-xylene degradation and electron release. The supplication of an external carbon source such as sodium acetate (NaAc) was conducive to increasing output voltage and coulombic efficiency. The electrochemical analysis revealed that released electrons can be transmitted with the action of NADH dehydrogenase to OmcZ, OmcS, and OmcA outer membrane proteins via a direct or indirect pathway, and ended up transferring to the anode directly.

Efficient biodechlorination at the Fe3O4-based silicone powder modified chlorobenzene-affinity anode.

The treatment of chlorinated volatile organic compounds faces challenges of secondary pollution and less-efficiency due to the substitution of chlorine. Microbial fuel cells (MFCs) provide a promising opportunity for its abatement. In this study, a novel Fe3O4 nanoparticles and silicone-based powder (SP) were integrated and immobilized on carbon felt (CF+Fe3O4@SP), which was further used as anode in the chlorobenzene (CB) powered MFC. Owing to the cooperation between SP and Fe3O4, the anode exhibited excellent performance for both biodechlorination and power generation. The results indicated that the CF+Fe3O4@SP anode loaded MFC achieved 98.5% removal of 200 mg/L CB within 28 h, and the maximum power density was 675.9 mW/m3, which was a 45.6% increase compared to that of the bare CF anode. Microbial community analysis indicated that the genera Comamonadaceae, Pandoraea, Obscuribacteraceae, and Truepera were dominated, especially, the Comamonadaceae and Obscuribacteraceae showed outstanding affinity for Fe3O4 and SP, respectively. Moreover, the proportion of live bacteria, secretion of extracellular polymer substances, and protein content in the extracellular polymer substances were significantly increased by modifying Fe3O4@SP onto the carbon-based anode. Thus, this study provides new insights into the development of MFCs for refractory and hydrophobic volatile organic compounds removal.

The Efficacy and Mechanism of Qinghua Jianpi Recipe in Inhibiting Canceration of Colorectal Adenoma Based on Inflammatory Cancer Transformation.

Objective: This study is aimed at exploring the effect of Qinghua Jianpi Recipe on preventing colon polyp recurrence and inhibiting the progress of "inflammatory cancer transformation." And another goal is to explore the changes of intestinal flora structure and intestinal inflammatory (immune) microenvironment of mice with colon polyps treated by Qinghua Jianpi Recipe and to clarify its mechanism. Methods: Clinical trials were conducted to confirm the therapeutic effect of Qinghua Jianpi Recipe on patients with inflammatory bowel disease. The inhibitory effect of Qinghua Jianpi Recipe on "inflammatory cancer transformation" of colon cancer was confirmed by an adenoma canceration mouse model. Histopathological examination was used to evaluate the effects of Qinghua Jianpi Recipe on intestinal inflammatory state, adenoma number, and pathological changes of adenoma model mice. The changes of inflammatory indexes in intestinal tissue were tested by ELISA. Intestinal flora was detected by 16S rRNA high-throughput sequencing. Short-chain fatty acid metabolism in the intestine was analyzed by targeted metabolomics. Network pharmacology analysis of possible mechanism of Qinghua Jianpi Recipe on colorectal cancer was performed. Western blot was used to detect the protein expression of the related signaling pathways. Results: Qinghua Jianpi Recipe can significantly improve intestinal inflammation status and function in patients with inflammatory bowel disease. Qinghua Jianpi Recipe could significantly improve the intestinal inflammatory activity and pathological damage of adenoma model mice and reduce the number of adenoma. Qinghua Jianpi Recipe significantly increased the levels of Peptostreptococcales_Tissierellales, NK4A214_group, Romboutsia, and other intestinal flora after intervention. Meanwhile, the treatment group of Qinghua Jianpi Recipe could reverse the changes of short-chain fatty acids. Network pharmacology analysis and experimental studies showed that Qinghua Jianpi Recipe inhibited the "inflammatory cancer transformation" of colon cancer by regulating intestinal barrier function-related proteins, inflammatory and immune-related signaling pathways, and free fatty acid receptor 2 (FFAR2). Conclusion: Qinghua Jianpi Recipe can improve the intestinal inflammatory activity and pathological damage of patient and adenoma cancer model mice. And its mechanism is related to the regulation of intestinal flora structure and abundance, short-chain fatty acid metabolism, intestinal barrier function, and inflammatory pathways.

Dibenzothiophene Removal from Fuel Oil by Metal-Organic Frameworks: Performance and Kinetics.

Desulfurization of organic sulfur in the fuel oil is essential to cut down the emission of sulfur dioxide, which is a major precursor of the acid rain and PM2.5. Currently, hydrodesulfurization is regarded as a state-of-art technology for the desulfurization of fuel oil. However, due to the stringent legislation of the fuel oil, the deep desulfurization technology is urgent to be developed. Adsorptive desulfurization method is promising due to the high selectivity and easy operation. The development of efficient adsorbent is important to advance this technology into industrial application. In this work, the five types of metal-organic frameworks (MOFs), including Cu-BTC, UMCM-150, MIL-101(Cr), UIO-66, and Cu-ABTC were synthesized for the adsorption of dibenzothiophene (DBT), a typical organic sulfur compound in the fuel oil. The experimental results revealed that the adsorption capacity of the five MOFs followed the order of Cu-ABTC, UMCM-150, Cu-BTC, MIL-101(Cr), and UIO-66, which adsorption capacities were 46.2, 34.2, 28.3, 26.3, and 22.0 mgS/g, respectively. The three types of Cu-based MOFs such as Cu-ABTC, UMCM-150, and Cu-BTC outperformed the Cr-based MOFs, MIL-101, and Zr-based MOFs, UIO-66. Since the surface area and pore volumes of the Cu-based MOFs were not the greatest among the tested five MOFs, the physical properties of the MOFs were not the only limited factor for the DBT adsorption. The π-complexation between DBT and linkers/metal in the MOFs was also important. Kinetic analysis showed that the DBT adsorption onto the five tested MOFs follows the pseudo-second-order kinetics, confirming that the chemical π-complexation was also contributed to the DBT adsorption. Furthermore, the operation parameters such as oil-adsorbent ratio, initial sulfur concentration and adsorption temperature for the DBT adsorption onto Cu-ABTC were optimized to be 100:1 g/g, 1000 mgS/L and 30 °C, respectively. This work can provide some insights into the development of efficient adsorbent for the organic sulfur adsorption.

Superior dimethyl disulfide degradation in a microbial fuel cell: Extracellular electron transfer and hybrid metabolism pathways.

To enhance the biological degradation of volatile organic sulfur compounds, a microbial fuel cell (MFC) system with superior activity is developed for dimethyl disulfide (DMDS) degradation. The MFC achieves a removal efficiency near 100% within 6 h (initial concentration: 90 mg L-1) and a maximum biodegradation rate constant of 0.743 mM h-1. The DMDS removal load attains 2.684 mmol h-1 L-1, which is 6.18-2440 times the loads of conventional biodegradation processes reported. Meanwhile, the maximum power density output and corresponding current density output are 5.40 W m-3 and 40.6 A m-3, respectively. The main mechanism of extracellular electron transfer is classified as mediated electron transfer, supplemented by direct transfer. Furthermore, the mass balance analysis indicates that methanethiol, S0, S2-, SO42-, HCHO, and CO2 are the main intermediate and end products involved in the hybrid metabolism pathway of DMDS. Overall, these findings may offer basic information for bioelectrochemical degradation of DMDS and facilitate the application of MFC in waste gas treatment. ENVIRONMENTAL IMPLICATION: Dimethyl disulfide (DMDS), which features poor solubility, odorous smell, and refractory property, is a typical pollutant emitted from the petrochemical industry. For the first time, we develop an MFC system for DMDS degradation. The superior DMDS removal load per unit reactor volume is 6.18-2440 times those of conventional biodegradation processes in literature. Both the electron transfer route and the hybrid metabolism pathway of DMDS are cleared in this work. Overall, these findings give an in-depth understanding of the bioelectrochemical DMDS degradation mechanism and provide an efficient alternative for DMDS removal.

Super enhancement of methanethiol biodegradation by new isolated Pseudomonas sp. coupling silicone particles.

A new strain, Pseudomonas sp. SJ-1, which was able to remove model odorous organics methanethiol (MT) has been isolated from the wastewater treatment plant and identified via 16S rRNA analysis. Initial MT concentration, temperature and pH played an important role in MT removal, and up to 100% of 260 mg L-1 of MT could be removed within 11 h under the optimum conditions (30 °C, pH 7.0) with an average degradation rate of 23.6 mg L-1 h-1, which was the highest one in literature so far. The silicone particles were added as the non-aqueous phases (NAP) to enhance the performance of MT degradation. The results indicated that the maximum degradation rate and specific cell growth of strain SJ-1 were 2.36 times and 1.31 times by Haldane kinetic model analysis in the NAP added test. The SO42- was identified as the major intermediate and CO2 as a final product in MT biodegradation. Overall, this is the first report that a newly isolated Pseudomonas sp. could use high concentration MT as sole energy source and carbon source and its activity could be enhanced by adding NAP. The results provide a suggestion for the development of more effective and reliable biological treatment processes.

External potential regulated biocathode for enhanced removal of gaseous chlorobenzene in bioelectrchemical system.

Microbial electrolysis cell (MEC) with a biocathode could provide extra reaction driving force for gaseous chlorobenzene (CB) removal. In this work, external potentials (-0.1 to -0.7 V vs. SHE) were applied to regulate the biocathodic activity. Results showed -0.3 V was the optimum potential, while the removal efficiency, dechlorination efficiency and Coulombic efficiency achieved 94%, 65%, and 89%, respectively. Electrochemical stimulation enriched dechlorination microorganisms (Achromobacter and Gordonia), and significantly improved CB mineralization efficiency, which was twice higher than that without additional potential at 300 mg m-3 inlet concentration. Furthermore, electron transfer between biocathode and microorganisms was mainly through direct electron transfer (DET). A new integrated redox pathway for CB anaerobic degradation was proposed, in which CB was sequentially converted into 2-chlorophenol and 3-chlorocatechol, then dechlorinated to catechol, and finally mineralized into CO2. Overall, this work provided an insight into gaseous CB bioelectrochemical degradation through the potential regulation.

Enhancement of gaseous o-xylene degradation in a microbial fuel cell by adding Shewanella oneidensis MR-1.

An exoelectrogens, Shewanella oneidensis MR-1 (S. oneidensis MR-1), was supplied to a microbial fuel cell (MFC) to enhance the degradation of a recalcitrant organic compound, o-xylene. The experimental results revealed that, with the addition of the S. oneidensis MR-1, the o-xylene removal efficiency increased by 35-76% compared with the original MFC. The presence of the S. oneidensis MR-1 not only improved the activity of the biofilm in the bioanode but also developed the connections between the bacteria by nanowires. Therefore, the maximum power density increased from 52.1 to 92.5 mW/m3 after the addition of the S. oneidensis MR-1. The microbial community analysis showed that adding the S. oneidensis MR-1 increased the biodiversity in bioanode. The dominant exoelectrogens shifted from Zoogloea sp., Delftia sp., Achromobacter sp., Acinetobacter sp., Chryseobacterium sp., and Stenotrophomonas sp. to Zoogloea sp., Delftia sp., Shewanella sp., Achromobacter sp., Hydrogenophaga sp., Sedimentibacter sp. and Chryseobacterium sp.. Furthermore, the cyclic voltammetry analysis showed that the outer membrane bound protein complex of OmcA-MtrCAB was involved as direct electron transfer pathway in the S. oneidensis MR-1 containing bioanode. We believed that this work is promising to provide optional strategy for efficient VOCs degradation by adjusting the microbial community in the bioanode.

Superior performance and mechanism of chlorobenzene degradation by a novel bacterium.

A newly isolated strain was identified as Ochrobactrum sp. by 16S rRNA sequence analysis and named as ZJUTCB-1. The strain was able to degrade mono-chlorobenzene (CB) as the sole carbon and energy source under aerobic conditions. This study is the first to report the degradation of CB by the genus Ochrobactrum. The degradation rate of CB reached 170.9 µmol L-1 h-1, which is at least 6 times higher than the previously reported data. The strain can efficiently degrade CB under a rang of temperatures (30-40 °C) and pH (6.0-7.0) with optimum at 40 °C and pH 7.0. Salt concentration higher than 0.05 mol L-1 remarkably reduced the biodegradation capability. Moreover, true oxic condition was not an essential element for biodegradation given that the CB degradation rate of 210.4 µmol L-1 h-1 was obtained under microaerobic condition. Based on the Haldane kinetic model, the maximum specific growth rate was 0.895 h-1, which is the highest in ever described CB-degrading strains. According to GC-MS analysis and enzymatic assay, CB was degraded via the meta-cleavage pathway by using 2,3-dioxygenase and 2-chlorophenol as the main intermediates, producing CO2 and Cl- as the final products. The great performance of CB degradation by Ochrobactrum sp. ZJUTCB-1 provided an alternative for development of more effective and reliable biotreatment process.