Mechanism of Interconnected Pore Formation in High Internal Phase Emulsion-Templated Polymer.

High internal phase emulsion-templated polymer, named polyHIPE, has received widespread attention due to its great potential applications in many fields, such as separation, adsorption, heterogeneous catalysis, and sound absorption. The broad applicability is largely dependent on its adjustable opening structure. However, the question of why polyHIPE has an interconnected pore network structure is still to be discussed. Herein, different types (w/o, o/w, and o/o) of HIPEs are prepared and subsequently detected with laser scanning confocal microscopy (LSCM), and the polyHIPEs obtained by curing the HIPEs are characterized by SEM. The observations suggest that the interconnected pore formation is primarily due to the presence of the surfactant-rich phase in the film between the neighboring droplets in HIPE. The interconnected pores are generated by removal of the surfactant-rich domains in the postcuring procedure, and their sizes would be enlarged if the solubility of the surfactant in the continuous phase decreases in the curing stage.

Aminopoly(carboxylic acid)-Functionalized PolyHIPE Beads toward Eliminating Trace Heavy Metal Ions from Water.

Many advanced materials are designed for the removal of heavy metal ions from water. However, materials for eliminating trace heavy metal ions from wastewater to meet drinking water standards remain a major challenge. Herein, epoxy group-functionalized open-cellular beads are synthesized by UV polymerization of a water-in-oil-in-water system. The epoxy groups are further transformed into diethylenetriaminepentaacetic acid (DTPA) with hexamethylene diamine as a bridging agent. The resulting material (DTPA@polyHIPE beads) can eliminate trace Cu(II), Cr(III), Pb(II), Fe(III), or Cd(II) from water. When 0.15 g of DTPA@polyHIPE beads are used to adsorb metal ions of 20 mg in 100 mL of water, the residue concentrations of Cu(II), Cr(III), Pb(II), Fe(III), and Cd(II) are reduced to 0.08, 0.06, 0.02, 0.09, and 0.07 mg/L, respectively. The adsorption efficiencies of the beads for these ions are all higher than 99.55%. The adsorbent is durable and exhibits good recyclability by retaining an adsorption capacity of ≥91% after 5 cycles. The negative values of ΔG in the adsorption process indicate that the adsorption is feasible and spontaneous. The chemical adsorption follows the Freundlich adsorption model, indicating a multilayer heterogeneous adsorption. The DTPA@polyHIPE beads have a great potential application in dealing with trace heavy metal ion polluted water.

Vegetation growth enhancement modulated by urban development status.

Cities are natural laboratories for studying the vegetation response to global change due to their own climatic, atmospheric, and biological conditions. However, whether the urban environment promoted vegetation growth is still uncertain. Using the Yangtze River Delta (YRD), an economic powerhouse of modern China, as a case study, this paper investigated the impact of urban environment on vegetation growth at three scales: cities, sub-cities (rural-urban gradient) -pixels. Based on the satellite observations of vegetation growth indicated during 2000-2020, we explored the direct (replacement of original land by impervious surfaces) and indirect impact (e.g., climatic environment) of urbanization on vegetation growth and their trends with urbanization level. We found that significant greening accounted for 43.18 %, and significant browning accounted for 3.60 % of the pixels in the YRD. Urban area was turning green faster than suburban area. Moreover, land use change intensity (D) was a representation of the direct impact ωd of urbanization. The direct impact of urbanization on vegetation growth was positively correlated with the intensity of land use change. Furthermore, vegetation growth enhancement due to indirect impact ωi occurred in 31.71 %, 43.90 % and 41.46 % of the YRD cities in 2000, 2010 and 2020. And vegetation enhancement occurred in 94.12 % of highly urbanized cities in 2020, while in medium and low urbanization cities, the averaged indirect impact was near zero or even negative, proving that vegetation growth enhancement was modulated by urban development status. Also, the growth offset (τ) was most pronounced in high urbanization cities (4.92 %), but there was no growth compensation in medium urbanization cities (-4.48 %) and low urbanization cities (-57.47 %). When urbanization intensity reached a threshold value of 50 % in highly urbanized cities, the growth offset (τ) tended to saturate and remained unchanged. Our findings have important implications for understanding the vegetation response to continuing urbanization process and future climate change.

Supercontinuum generation by noise-like pulses transmitted through normally dispersive standard single-mode fibers.

We report generation of broadband supercontinuum (SC) by noise-like pulses (NLPs) with a central wavelength of 1070 nm propagating through a long piece of standard single-mode fibers (~100 meters) in normal dispersion region far from the zero-dispersion point. Theoretical simulations indicate that the physical mechanism of SC generation is due to nonlinear effects in fibers. The cascaded Raman scattering is responsible for significant spectral broadening in the longer wavelength regions whereas the Kerr effect results in smoothing of SC generated spectrum. The SC exhibits low threshold (43 nJ) and a flat spectrum over 1050-1250 nm.