Quasi-Solid-State Electrolyte Induced by Metallic MoS2 for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are a promising high-energy-density technology for next-generation energy storage but suffer from an inadequate lifespan. The poor cycle life of Li-S batteries stems from their commonly adopted catholyte-mediated operating mechanism, where the shuttling of dissolved polysulfides results in active material loss on the sulfur cathode and surface corrosion on the lithium anode. Here, we report in situ formation of a quasi-solid-state electrolyte (QSSE) on the metallic 1T phase molybdenum disulfide (MoS2) host that extends the lifetime of Li-S batteries. We find that the metallic 1T phase MoS2 host is able to initiate the ring-opening polymerization of 1,3-dioxolane (DOL), forming an integrated QSSE inside batteries. Nuclear magnetic resonance analysis reveals that the QSSE consists of ∼13% liquid DOL in a solid polymer matrix. The QSSE efficiently mediates sulfur redox reactions through dissolution-conversion chemistry while simultaneously suppressing polysulfide shuttling. Therefore, while ensuring high sulfur utilization, it avoids degradation of both electrodes, as well as the concomitant electrolyte consumption, leading to enhanced cycling stability. Under a practical lean electrolyte condition (electrolyte-to-sulfur ratio = 2 µL mg-1), Li-S pouch cell batteries with the QSSE demonstrate a capacity retention of 80.7% after 200 cycles, much superior to conventional liquid electrolyte cells that fail within 70 cycles. The QSSE also enables Li-S pouch cell batteries to operate across a wider temperature range (5 to 45 °C), together with improved safety under mechanical damage.

Steric Control of Luminescence in Phenyl-Substituted Trityl Radicals.

Triphenylmethyl (trityl) radicals have shown potential for use in organic optoelectronic applications, but the design of practical trityl structures has been limited to donor/radical charge-transfer systems due to the poor luminescence of alternant symmetry hydrocarbons. Here, we circumvent the symmetry-forbidden transition of alternant hydrocarbons via excited-state symmetry breaking in a series of phenyl-substituted tris(2,4,6-trichlorophenyl)methyl (TTM) radicals. We show that 3-fold phenyl substitution enhances the emission of the TTM radical and that steric control modulates the optical properties in these systems. Simple ortho-methylphenyl substitution boosts the photoluminescence quantum efficiency from 1% (for TTM) to 65% at a peak wavelength of 612 nm (for 2-T3TTM) in solution. In the crystalline solid state, the neat 2-T3TTM radical shows a remarkably high photoluminescence quantum efficiency of 25% for emission peaking at 706 nm. This has implications in the design of aryl-substituted radical structures where the electronic coupling of the substituents influences variables such as emission, charge transfer, and spin interaction.

Asymmetrically Functionalized Electron-Deficient π-Conjugated System for Printed Single-Crystalline Organic Electronics.

Large-area single-crystalline thin films of n-type organic semiconductors (OSCs) fabricated via solution-processed techniques are urgently demanded for high-end electronics. However, the lack of molecular designs that concomitantly offer excellent charge-carrier transport, solution-processability, and chemical/thermal robustness for n-type OSCs limits the understanding of fundamental charge-transport properties and impedes the realization of large-area electronics. The benzo[de]isoquinolino[1,8-gh]quinolinetetracarboxylic diimide (BQQDI) π-electron system with phenethyl substituents (PhC2 -BQQDI) demonstrates high electron mobility and robustness but its strong aggregation results in unsatisfactory solubility and solution-processability. In this work, an asymmetric molecular design approach is reported that harnesses the favorable charge transport of PhC2 -BQQDI, while introducing alkyl chains to improve the solubility and solution-processability. An effective synthetic strategy is developed to obtain the target asymmetric BQQDI (PhC2 -BQQDI-Cn ). Interestingly, linear alkyl chains of PhC2 -BQQDI-Cn (n = 5-7) exhibit an unusual molecular mimicry geometry with a gauche conformation and resilience to dynamic disorders. Asymmetric PhC2 -BQQDI-C5 demonstrates excellent electron mobility and centimeter-scale continuous single-crystalline thin films, which are two orders of magnitude larger than that of PhC2 -BQQDI, allowing for the investigation of electron transport anisotropy and applicable electronics.

Electron-Deficient Benzo[de]isoquinolino[1,8-gh]quinoline Diamide π-Electron Systems.

Synthetically versatile electron-deficient π-electron systems are urgently needed for organic electronics, yet their design and synthesis are challenging due to the low reactivity from large electron affinities. In this work, we report a benzo[de]isoquinolino[1,8-gh]quinoline diamide (BQQDA) π-electron system. The electron-rich condensed amide as opposed to the generally-employed imide provides a suitable electronic feature for chemical versatility to tailor the BQQDA π-electron system for various electronic applications. We demonstrate an effective synthetic method to furnish the target BQQDA parent structure, and highly selective functionalization can be performed on bay positions of the π-skeleton. In addition, thionation of BQQDA can be accomplished under mild conditions. Fine-tuning of fundamental properties and supramolecular packing motifs are achieved via chemical modifications, and the cyanated BQQDA organic semiconductor demonstrates a high air-stable electron-carrier mobility.

Mixed-Orbital Charge Transport in N-Shaped Benzene- and Pyrazine-Fused Organic Semiconductors.

The hole-carrier transport of organic semiconductors is widely known to occur via intermolecular orbital overlaps of the highest occupied molecular orbitals (HOMO), though the effect of other occupied molecular orbitals on charge transport is rarely investigated. In this work, we first demonstrate evidence of a mixed-orbital charge transport concept in the high-performance N-shaped decyl-dinaphtho[2,3-d:2',3'-d']benzo[1,2-b:4,5-b']dithiophene (C10-DNBDT-NW), where electronic couplings of the second HOMO (SHOMO) and third HOMO (THOMO) also contribute to the charge transport. We then present the molecular design of an N-shaped bis(naphtho[2',3':4,5]thieno)[2,3-b:2',3'-e]pyrazine (BNTP) π-electron system to induce more pronounced mixed-orbital charge transport by incorporating the pyrazine moiety. An effective synthetic strategy for the pyrazine-fused extended π-electron system is developed. With substituent engineering, the favorable two-dimensional herringbone assembly can be obtained with BNTP, and the decylphenyl-substituted BNTP (C10Ph-BNTP) demonstrates large electronic couplings involving the HOMO, SHOMO, and THOMO in the herringbone assembly. C10Ph-BNTP further shows enhanced mixed-orbital charge transport when the electronic couplings of all three occupied molecular orbitals are taken into consideration, which results in a high hole mobility up to 9.6 cm2 V-1 s-1 in single-crystal thin-film organic field-effect transistors. The present study provides insights into the contribution of HOMO, SHOMO, and THOMO to the mixed-orbital charge transport of organic semiconductors.

Nitrogen-Containing Perylene Diimides: Molecular Design, Robust Aggregated Structures, and Advances in n-Type Organic Semiconductors.

ConspectusOrganic semiconductors (OSCs) have attracted much attention because of their potential applications for flexible and printed electronic devices and thus have been extensively investigated in a variety of research fields, such as organic chemistry, solid-state physics, and device physics and engineering. Organic thin-film transistors (OTFTs), a class of OSC-based devices, have been expected to be an alternative of silicon-based metal oxide semiconductor field-effect transistors (MOSFETs), which is the indispensable element for most of the current electronic devices. However, the noncovalently aggregated, van der Waals solid nature of the OSCs, by contrast to covalently bound silicon, conventionally exhibits lower carrier mobilities, limiting the practical applications of OTFTs. In particular, electron-transporting (i.e., n-type) OSCs lag behind their hole-transporting (p-type) counterparts in carrier mobility and ambient stability as OTFTs. This is primarily because of the difficulty in achieving compatibility between the aggregated structure exhibiting excellent carrier mobility and that with enough electron affinity. Recent understandings of carrier transport in OSCs explain that large and two-dimensionally isotropic transfer integrals coupled with small fluctuations are crucial for high carrier mobilities. In addition, from a practical point of view, the compatibility with practical device processes is highly required. Rational molecular design principles, therefore, are still demanded for developing OSCs and OTFTs toward high-end device applications.Herein, we will show our recent progress in the development of n-type OSCs with the key π-electron core (π-core) of benzo[de]isoquinolino[1,8-gh]quinolinetetracarboxylic diimide (BQQDI) on the basis of single-crystal OTFT technologies and the band-transport model enabled by two-dimensional molecular packing arrangements. The critical point is the introduction of electronegative nitrogen atoms into the π-core: the nitrogen atoms in BQQDI not only deepen the molecular orbital energies but also allow hydrogen-bonding-like attractive intermolecular interactions to control the aggregated structures, unlike the conventional role of the nitrogen introduced into OSCs only for the former role. Hence, the BQQDI analogues exhibit air-stable OTFT behavior and two-dimensional brickwork packing structures. Specifically, phenethyl-substituted analogue (PhC2-BQQDI) has been shown as the first principal BQQDI-based material, demonstrating solution-processable thin-film single crystals, fewer anisotropic transfer integrals, and an effective suppression of molecular motions, leading to band-like electron-transport properties and stress-durable n-channel OTFT performances, in conjunction with the support of computational calculations. Insights into more fundamental points of view have been found by side-chain derivatization and OTFT studies on polycrystalline and single-crystal films. We hope that this Account provides readers with new strategies for designing high-performance OSCs by two-dimensional control of the aggregated structures.

Role of Perfluorophenyl Group in the Side Chain of Small-Molecule n-Type Organic Semiconductors in Stress Stability of Single-Crystal Transistors.

Operational stability, such as long-term ambient durability and bias stress stability, is one of the most significant parameters in organic thin-film transistors (OTFTs). The understanding of such stabilities has been mainly devoted to energy levels of frontier orbitals, thin-film morphologies, and device configuration involving gate dielectrics and electrodes, whereas the roles of molecular and aggregated structural features in device stability are seldom discussed. In this Letter, we report a remarkable enhancement of operational stability, especially bias stress, of n-channel single-crystal OTFTs derived from a replacement of phenyl with perfluorophenyl groups in the side chain. Because of the several-molecule-thick single-crystal nature employed for the OTFTs, the crystal-surface properties are thought to be critical, where the surface structure composed of perfluorophenyl moieties could suppress interactions between environmental species and field-induced carriers owing to increased hydrophobicity and steric protection of π-conjugated units.

Approaching isotropic charge transport of n-type organic semiconductors with bulky substituents.

Benzo[de]isoquinolino[1,8-gh]quinolinetetracarboxylic diimide (BQQDI) is an n-type organic semiconductor that has shown unique multi-fold intermolecular hydrogen-bonding interactions, leading to aggregated structures with excellent charge transports and electron mobility properties. However, the strong intermolecular anchoring of BQQDI presents challenges for fine-tuning the molecular assembly and improving the semiconducting properties. Herein, we report the design and synthesis of two BQQDI derivatives with phenyl- and cyclohexyl substituents (Ph-BQQDI and Cy6-BQQDI), where the two organic semiconductors show distinct molecular assemblies and degrees of intermolecular orbital overlaps. In addition, the difference in their packing motifs leads to strikingly different band structures that give rise to contrasting charge-transport capabilities. More specifically, Cy6-BQQDI bearing bulky substituents exhibits isotropic intermolecular orbital overlaps resulting in equal averaged transfer integrals in both π-π stacking directions, even when dynamic disorders are taken into account; whereas Ph-BQQDI exhibits anisotropic averaged transfer integrals in these directions. As a result, Cy6-BQQDI shows excellent device performances in both single-crystalline and polycrystalline thin-film organic field-effect transistors up to 2.3 and 1.0 cm2 V-1 s-1, respectively.

Alkyl-Substituted Selenium-Bridged V-Shaped Organic Semiconductors Exhibiting High Hole Mobility and Unusual Aggregation Behavior.

Toward the development of high-performance organic semiconductors (OSCs), carrier mobility is the most important requirement for next-generation OSC-based electronics. The strategy is that OSCs consisting of a highly extended π-electron core exhibit two-dimensional (2D) aggregated structures to offer effective charge transport. However, such OSCs, in general, show poor solubility in common organic solvents, resulting in limited solution processability. This is a critical trade-off between the development of OSCs with simultaneous high carrier mobility and suitable solubility. To address this issue, herein, five-membered ring-fused selenium-bridged V-shaped binaphthalene with decyl substituents (C10-DNS-VW) is developed and synthesized by an efficient method. C10-DNS-VW exhibits significantly high solubility for solution processes. Notably, C10-DNS-VW forms a one-dimensional π-stacked packing motif (1D motif) and a 2D herringbone (HB) packing motif (2D motif), depending on the crystal growth condition. On the other hand, the fabrication of thin films by means of both solution process and vacuum deposition techniques forms only the 2D HB motif. External stress tests such as heating and exposure to solvent vapor indicated that 1D and 2D motifs could be synergistically induced by the total balance of intermolecular interactions. Finally, the single-crystalline films of C10-DNS-VW by solution process exhibit carrier mobility up to 11 cm2 V-1 s-1 with suitable transistor stability under ambient conditions for more than two months, indicating that C10-DNS-VW is one of the most promising candidates for breaking the trade-off in the field of solution-processed technologies.

Bent-Shaped p-Type Small-Molecule Organic Semiconductors: A Molecular Design Strategy for Next-Generation Practical Applications.

Significant progress has been made in both molecular design and fundamental scientific understanding of organic semiconductors (OSCs) in recent years. Suitable charge-carrier mobilities (µ) have been obtained by many high-performance OSCs (µ > 10 cm2 V-1 s-1), but drawbacks remain, including low solution processability and poor thermal durability. In addition, since aggregation of OSCs involves weak intermolecular interactions, the molecules are perpetually in thermal motion, even in the solid state, which disrupts charge-carrier transport. These issues limit potential applications of OSCs. The present work examines a molecular design for hole-transporting (p-type) OSCs based on the "bent-shaped" geometry with specific molecular orbital configurations, which aims to enhance effective intermolecular orbital overlaps, stabilize crystal phases, suppress detrimental molecular motions in the solid state, and improve solution processability. The results indicated that such OSCs have high µ and suitable solution processability, and are resistant to ambient and thermal conditions, making them suitable for practical applications.

Intramolecular charge transfer and solvation dynamics of push-pull dyes with different π-conjugated linkers.

The solvation-dependent excited state dynamics of two push-pull fluorophores with donor-π-acceptor (D-π-A) structures were investigated using steady-state and ultrafast transient absorption (TA) spectroscopy, backed by theoretical calculations. Identical D and A groups were present in both dyes, which differed only in the structure of their central π-conjugated linkers. Dye 1 features a p-phenylenediethynyl linker, while dye 2 contains a 2,5-diethynylthiophene linker. From the steady-state spectra, no appreciable shifts in absorption bands were observed, whereas large red-shifts in emission were seen with increasing solvent polarity, which indicated that the excited states were more polar than the ground state. Theoretical calculations support charge transfer from the triphenylamine (TPA) donor to the pentafluorosulfanyl (SF5) acceptor viaπ-conjugated linkers to form an intramolecular charge transfer (ICT) state. TA spectra revealed that a solvation-stabilized conformationally relaxed intramolecular charge transfer (ICT') state was formed in polar solvents, but only an ICT state was observed in nonpolar solvent. The SE band was quenched within 1 ps in high-polarity solvent, which corresponds to the low fluorescence quantum yield. It can be concluded that the dye with the p-phenylenediethynyl π-linker (i.e., dye 1) exhibits a larger degree of ICT than the thiophene analogue (i.e., dye 2). These findings demonstrate how solvation can fine-tune the photophysical properties of push-pull dyes, and this study highlights the importance of π-conjugated linkers in the excited state ICT process.

Air-Stable Benzo[ c]thiophene Diimide n-Type π-Electron Core.

In this paper, the molecular design of the first deep-lowest unoccupied molecular orbital (LUMO) level diimide π-electron core, benzo[ c]thiophene diimide (BTDI), as a novel n-type organic semiconductor was determined. An original synthetic sequence was devised to obtain the target cyclohexyl-BTDI (Cy6-BTDI) derivative. Cy6-BTDI demonstrated completely reversible reduction waves and a stable radical anionic state. Favorable brickwork molecular assembly and two-dimensional charge transport properties of Cy6-BTDI were exhibited in the solid state. As a result, air-stable electron mobilities were obtained from the BTDI organic field-effect transistors under ambient conditions.

Pulling with the Pentafluorosulfanyl Acceptor in Push-Pull Dyes.

A new class of push-pull fluorophores featuring the pentafluorosulfanyl (SF5) group as a potent acceptor has been synthesized. Known for its excellent chemical and thermal stability, the unique SF5 functionality is also strongly electron-withdrawing but at the same time highly lipophilic. We report six new fluorescent dyes, which were characterized by UV-vis/fluorescence spectroscopy, single-crystal X-ray diffraction, and cyclic voltammetry. Notable dye properties include large Stokes shifts (>100 nm), pronounced solvatofluorochromic effects arising from intramolecular charge transfer, moderate fluorescence quantum yields in both solutions and thin films, and extensive supramolecular C-H···F interactions in their crystalline states. Reversible mechanofluorochromism was also observed in dye 5, where grinding and fuming of a solid sample gave blue- and red-shifted emissions, respectively. Postfunctionalization of dye 3 to afford a pair of strong visible-light absorbers was also demonstrated.

Sultam-Based Hetero[5]helicene: Synthesis, Structure, and Crystallization-Induced Emission Enhancement.

A deep-blue-emitting sultam-based hetero[5]helicene was synthesized in four steps, and its crystal structure and physical properties were characterized. The helicene displays more than two-fold crystallization-induced emission enhancement as well as atypical blue-shifting of its solid-state emission relative to the solution phase. This rapid synthesis of an unusual sulfonamide-based helicene fluorophore is expected to generate new molecular design options that will help address the ongoing challenges associated with designing pure-blue emitters for organic optoelectronic and sensing applications.