Solvent Regulation Induced Cathode Aggregation-Induced Electrochemiluminescence of Tetraphenylethylene Nanoaggregates for Ultrasensitive Zearalenone Analysis.

Zearalenone (ZEN) is an extremely hazardous chemical widely existing in cereals, and its high-sensitivity detection possesses significant significance to human health. Here, the cathodic aggregation-induced electrochemiluminescence (AIECL) performance of tetraphenylethylene nanoaggregates (TPE NAs) was modulated by solvent regulation, based on which an electrochemiluminescence (ECL) aptasensor was constructed for sensitive detection of ZEN. The aggregation state and AIECL of TPE NAs were directly and simply controlled by adjusting the type of organic solvent and the fraction of water, which solved the current shortcomings of low strength and weak stability of the cathode ECL signal for TPE. Impressively, in a tetrahydrofuran-water mixed solution (volume ratio, 6:4), the relative ECL efficiency of TPE NAs reached 16.03%, which was 9.2 times that in pure water conditions, and the maximum ECL spectral wavelength was obviously red-shifted to 617 nm. In addition, "H"-shape DNA structure-mediated dual-catalyzed hairpin self-assembly (H-D-CHA) with higher efficiency by the synergistic effect between the two CHA reactions was utilized to construct a sensitive ECL aptasensor for ZEN analysis with a low detection limit of 0.362 fg/mL. In conclusion, solvent regulation was a simple and efficient method for improving the performance of AIECL materials, and the proposed ECL aptasensor had great potential for ZEN monitoring in food safety.

A Fluorescence Light-Up 3D DNA Walker Driven and Accelerated by Endogenous Adenosine-5'-triphosphate for Sensitive and Rapid Label-Free MicroRNA Detection and Imaging in Living Cells.

Herein, a fluorescence light-up 3D DNA walker (FLDW) was powered and accelerated by endogenous adenosine-5'-triphosphate (ATP) molecules to construct a biosensor for sensitive and rapid label-free detection and imaging of microRNA-221 (miRNA-221) in malignant tumor cells. Impressively, ATP as the driving force and accelerator for FLDW could significantly accelerate the operation rate of FLDW, reduce the likelihood of errors in signaling, and improve the sensitivity of detection and imaging. When FLDW was initiated by output DNA H1-op transformed by target miRNA-221, G-rich sequences in the S strand, anchored to AuNP, were exposed to form G-quadruplexes (G4s), and thioflavin T (ThT) embedded in the G4s emitted intense fluorescence to realize sensitive and rapid detection of target miRNA-221. Meanwhile, the specific binding of ThT to G4 with a weak background fluorescence response was utilized to enhance the signal-to-noise ratio of the label-free assay straightforwardly and cost-effectively. The proposed FLDW system could realize sensitive detection of the target miRNA-221 in the range of 1 pM to 10 nM with a detection limit of 0.19 pM by employing catalytic hairpin assembly (CHA) to improve the conversion of the target. Furthermore, by harnessing the abundant ATP present in the tumor microenvironment, FLDW achieved rapid and accurate imaging of miRNA-221 in cancer cells. This strategy provides an innovative and high-speed label-free approach for the detection and imaging of biomarkers in cancer cells and is expected to be a powerful tool for bioanalysis, diagnosis, and prognosis of human diseases.

Single-Atom Iron Doped Carbon Dots with Highly Efficient Electrochemiluminescence for Ultrasensitive Detection of MicroRNAs.

Herein, single-atom iron doped carbon dots (SA Fe-CDs) were successfully prepared as novel electrochemiluminescence (ECL) emitters with high ECL efficiency, and a biosensor was constructed to ultrasensitively detect microRNA-222 (miRNA-222). Importantly, compared with the conventional without single-atom doped CDs with low ECL efficiency, SA Fe-CDs exhibited strong ECL efficiency, in which single-atom iron as an advanced coreactant accelerator could significantly enhance the generation of reactive oxygen species (ROS) from the coreactant S2O82- for improving the ECL efficiency. Moreover, a neoteric amplification strategy combining the improved strand displacement amplification with Nt.BbvCI enzyme-induced target amplification (ISDA-EITA) could produce 4 output DNAs in every cycle, which greatly improved the amplification efficiency. Thus, a useful ECL biosensor was built with a detection limit of 16.60 aM in the range of 100 aM to 1 nM for detecting traces of miRNA-222. In addition, miRNA-222 in cancer cell lysate (MHCC-97L) was successfully detected by using the ECL biosensor. Therefore, this strategy provides highly efficient single-atom doped ECL emitters for the construction of sensitive ECL biosensing platforms in the biological field and clinical diagnosis.

Cascaded autocatalytic hairpin assembly molecular circuit for amplified fluorescent aptamer luteinising hormone assay.

The quantitative detection of luteinising hormone (LH) is critical for the study of the physiological mechanism of reproductive function and the assessment of infertility and the clinical treatment of reproductive disorders. However, conventional approaches for LH detection are mostly based on an antibody recognition module with the limitations of sensitivity, simplicity and cost. The development of robust LH sensing methods is therefore highly demanded for facilitating the diagnosis of LH-related diseases. We establish a convenient, amplified and sensitive fluorescent aptamer LH assay based on new target-triggered and cascaded autocatalytic hairpin assembly (C-aCHA) circuit amplification means via initiator sequence replication. Target LH molecules bind the aptamers in the aptamer/initiator duplexes to release the initiator sequences, which trigger CHA formation of DNA three-way junctions (TWJs) and the unfolding of fluorescently quenched signal hairpins to show amplified fluorescence. The TWJs further activate another CHA cycle for the yield of more initiator sequences to form the C-aCHA circuit amplification cycles, which lead to the unfolding of many signal hairpins to exhibit substantially magnified fluorescence recovery for detecting LH down to 8.56 pM in the range from 10 pM to 50 nM. In addition, the monitoring of trace LH in diluted serums by this sensing approach has been also verified. Our LH assay clearly outperforms current existing antibody-based methods and the C-aCHA signal amplification strategy can be easily extended as a robust means for sensitively monitoring various biomolecular markers with simple replacement of the corresponding aptamers for diverse applications.

Host-Guest Recognition-Mediated Supramolecular Aggregation-Induced Electrochemiluminescence of Iridium(III) Complexes for Nucleic Acid Bioassay.

Currently reported aggregation-induced electroluminescence (AIECL) is usually based on the electrostatic integration of luminous monomers, and its application is still limited by the low ECL efficiency and poor structural stability of electrostatic integration-based AIECL emitters. Herein, host-guest recognition-mediated supramolecular AIECL was creatively developed to overcome the defects of electrostatic-integration-based AIECL. Cucurbit[8]uril (CB[8]) as the host recognized tris (2-phenylpyridine) iridium(III) [Ir(ppy)3] as the guest to form a novel supramolecular complex Ir-CB[8]. CB[8] can not only provide a large hydrophobic cavity to efficiently load Ir(ppy)3 and enrich coreactant tripropylamine but also utilize its carbonyl-laced portals to form intramolecular hydrogen bonds to stabilize the supramolecular structure, so Ir-CB[8] revealed excellent AIECL performance. The AIECL emitter Ir-CB[8] coupled the efficient DNA walker to construct a sensing system for miRNA-16 detection. Au nanoparticles@norepinephrine (AuNPs@NE) trapped by single-strand S1 was developed to significantly quench the ECL emission of Ir-CB[8]. When the target microRNA-16 (miRNA-16) existed, H1 was opened and the sequential assembly from H2 to H7 was triggered, forming "windmill"-like DNA walker with six Pb2+-dependent leg DNA. The assembled DNA walker, which was centered on DNA structure, had high efficiency and biocompatibility and can cut S1 to keep the DNA fragment-carrying quencher AuNPs@NE away from the electrode surface, thus restoring the ECL emission of Ir-CB[8] and realizing ultrasensitive detection of miRNA-16. Supramolecular AIECL mediated by host-guest recognition provides a new way for constructing AIECL emitters with excellent structural stability and AIECL efficiency, and an Ir-CB[8] coupling "windmill"-like DNA walker builds a promising ECL-sensing system for bioassay.

N vacancy and self-enhancement induced high anodic electrochemiluminescence of 3D g-C3N4 for sensitive staphylococcus aureus analysis.

Here, 3D g-C3N4 with dense N vacancy in its 3D porous interconnected open-framework was synthesized, and the co-reactive 3-(dibutylamino)propylamine (DBAPA) was further covalently coupled onto the surface, resulting in a strong self-enhanced anodic electrochemiluminescence (ECL). Through introduction of high-density N vacancy, for the obtained 3D g-C3N4-NV, the band gap was broadened and the electrical conductivity was enhanced, realizing an obvious ECL improvement. Moreover, after the covalent binding of co-reactive DBAPA, the obtained 3D g-C3N4-NV-DBAPA exhibited a more intensive self-enhanced ECL signal due to the higher co-reaction efficiency originated from shorter electron transfer distance and lower energy loss. Based on the high initial signal of the proposed 3D g-C3N4-NV-DBAPA, a sensitive ECL biosensor with signal "on-off" was fabricated in assistance with multiple horizontal ordered hybridization chain reaction (HO-HCR). Through orderly fixing the reacted DNA chains on the Y-shape DNA structure on the electrode could effectively decrease diffusion process and improve the reaction efficiency of HCR process, resulting in the formation of numerous long horizontal double-strand DNA that could immobilize abundant ferrocene-doxorubicin (Fc-Dox) with ECL quenching effect. Meanwhile, compared to the traditional vertical HCR, the HO-HCR could make the quench reagent closer to the ECL emitter on the electrode surface and obtain a more effective quenching effect to enhance the sensing sensitivity. As a result, the proposed ECL biosensor archived the sensitive measurement of staphylococcus aureus with a detection limit of 10.3 aM.

Polymerized carbon dots with high electrochemiluminescence efficiency and long wavelength ECL emission for ultrasensitive detection of MicroRNA-222.

Herein, a new electrochemiluminescence (ECL) biosensor was constructed with highly efficient polymerized carbon dots (PCDs) as ECL emitter and the improved localized catalytic hairpin assembly (L-CHA) as signal amplifier for ultrasensitive detection of microRNA-222 (miRNA-222). Impressively, compared to the traditional carbon dots with inefficient blue region ECL emission, PCDs with N, O co-dope and large conjugated π-system showed high electrical conductivity, narrow band gap and strong radiative transition, which could exhibit high ECL efficiency to improve the sensitivity of detection and long wavelength ECL emission to achieve deep tissue penetration for reducing biological damage. Furthermore, the trace target miRNA-222 could be efficiently converted into large amounts of output DNA labelled with the quencher dopamine (S-DA) through the L-CHA reaction to significantly enhance the target amplification efficiency for further improving the sensitivity of detection. Thus, the ECL biosensor could achieve the ultrasensitive detection of miRNA-222 from 100 aM to 100 pM with the detection limit of 76 aM. Therefore, this work proposed a novel CDs with high ECL efficiency and long wavelength ECL emission, which not only was used to build an ultrasensitive biosensor for biomolecules detection in clinical diagnosis, but also served as a potential emitter for ECL bioimaging.

A simple and reliable interenzyme distance regulation strategy based on a DNA quadrangular prism scaffold for ultrasensitive ochratoxin A detection.

Developing sensitive and accurate Ochratoxin A (OTA) detection methods is essential for food safety. Herein, a simple and reliable strategy for regulating interenzyme distance based on a rigid DNA quadrangular prism as a scaffold was proposed to establish a new electrochemical biosensor for ultrasensitive detection of OTA. The interenzyme distances were precisely adjusted by changing the sequences of the hybridized portions of hairpins SH1 and SH2 to the DNA quadrangular prism, avoiding the complexity and instability of the previous DNA scaffold-based enzyme spacing adjustment strategies. The electrochemical biosensor constructed at the optimal interenzyme distance (10.4 nm) achieved sensitive detection of OTA in a dynamic concentration range from 10 fg/mL to 250 ng/mL with a detection limit of 3.1 fg/mL. In addition, the biosensor was applied to quantify OTA in real samples, exhibiting great application potential in food safety.

The tightest self-assembled ruthenium metal-organic framework combined with proximity hybridization for ultrasensitive electrochemiluminescence analysis of paraquat.

Metal-organic frameworks (MOFs), as porous materials, have great potential for exploring high-performance electrochemiluminescence (ECL) probes. However, the constrained applicability of MOFs in the realm of ECL biosensing is primarily attributed to their inadequate water stability, which consequently impairs the overall ECL efficiency. Herein, we developed a competitive ECL biosensor based on a novel tightest structural ruthenium-based organic framework emitter combining the proximity hybridization-induced catalytic hairpin assembly (CHA) strategy and the quenching effect between the Ru-MOF and ferrocene for detecting paraquat (PQ). Through a simple hydrothermal synthesis strategy, ruthenium and 2,2'-bipyrimidine (bpm) are head-to-head self-assembled to obtain a novel tightest structural Ru-MOF. Due to the metal-ligand charge-transfer (MLCT) effect between ruthenium and the bpm ligand and the connectivity between the internal chromophore units, the Ru-MOF exhibits strong ECL emissions. Meanwhile, the coordination-driven Ru-MOF utilizes strong metal-organic coordination bonds as building blocks, which effectively solves the problem of serious leakage of chromophores caused by water solubility. The sensitive analysis of PQ is realized in the range of 1 pg/mL to 1 ng/mL with a detection limit of 0.352 pg/mL. The tightest structural Ru-MOF driven by the coordination of ruthenium and bridging ligands (2,2'-bipyrimidine, bpm) provides new horizons for exploring high-performance MOF-based ECL probes for quantitative analysis of biomarkers.

Dynamic surface reconstruction of individual gold nanoclusters by using a co-reactant enables color-tunable electrochemiluminescence.

Here we report for the first time the phenomenon of continuously color-tunable electrochemiluminescence (ECL) from individual gold nanoclusters (Au NCs) confined in a porous hydrogel matrix by adjusting the concentration of the co-reactant. Specifically, the hydrogel-confined Au NCs exhibit strong dual-color ECL in an aqueous solution with triethylamine (TEA) as a co-reactant, with a record-breaking quantum yield of 95%. Unlike previously reported Au NCs, the ECL origin of the hydrogel-confined Au NCs is related to both the Au(0) kernel and the Au(i)-S surface. Surprisingly, the surface-related ECL of Au NCs exhibits a wide color-tunable range of 625-829 nm, but the core-related ECL remains constant at 489 nm. Theoretical and experimental studies demonstrate that the color-tunable ECL is caused by the dynamic surface reconstruction of Au NCs and TEA radicals. This work opens up new avenues for dynamically manipulating the ECL spectra of core-shell emitters in biosensing and imaging research.

Renewable Electrochemiluminescence Biosensor Based on Eu-MOGs as a Highly Efficient Emitter and a DNAzyme-Mediated Dual-drive DNA Walker as a Signal Amplifier for Ultrasensitive Detection of miRNA-222.

Herein, novel europium metal-organic gels (Eu-MOGs) with excellent cathode electrochemiluminescence (ECL) emission are first used to construct biosensors for the ultrasensitive detection of miRNA-222. Impressively, N and O elements of organic ligand 2,2':6,2″-terpyridine 4,4',4″-tricarboxylic acid (H3-tctpy) can perfectly coordinate with Eu3+ to form Eu-MOGs, which not only reduce nonradiative transition caused by the intramolecular free rotation of phenyl rings in other MOGs to enhance the ECL signal with extraordinary ECL efficiency as high as 37.2% (vs the [Ru(bpy)3]2+/S2O82- ECL system) but also reinforce ligand-to-metal charge transfer (LMCT) by the strong affinity between Eu3+ and N and O elements to greatly improve the stability of ECL signals. Besides, an improved nucleic acid cascade amplification reaction is developed to greatly raise the conversion efficiency from target miRNA-222 to a DNAzyme-mediated dual-drive DNA walker as output DNA, which can simultaneously shear the specific recognition sites from two directions. In that way, the proposed biosensor can further enhance the detection sensitivity of miRNA-222 with a linear range of 10 aM-1 nM and a detection limit (LOD) of 8.5 aM, which can also achieve an accurate response in cancer cell lysates of MHCC-97L and HeLa. Additionally, the biosensor can be self-regenerated by the folding/unfolding of related triplets with pH changes to simplify experimental operations and reduce the cost. Hence, this work proposed novel MOGs with stable and intense ECL signals for the construction of a renewable ECL biosensor, supplying a reliable detection method in biomarker analysis and disease diagnosis.

Fluorescence Biosensing Based on Bifurcated DNA Scaffold-Aggregated Ag Nanocluster via Responsive Conformation Switch of Quasi-Molecular Beacon.

To address the limitations of typical hairpin-structural molecular beacons, exploring the ability of a quasi-molecular beacon (qMB) to create label-free fluorescence biosensors is intriguing and remains a challenge. Herein, we propose the first example of modular qMB with the feature of a stimulation-responsive conformation switch to develop an aggregated Ag nanocluster (aAgNC) in a bifurcated DNA scaffold for fluorescently sensing a specific initiator (I*). This qMB was well designed to program four functional modules: I*-recognizable element adopting metastable stem-loop bihairpin structure and two DNA splits (exposed C3GT4 and locked C4AC4T) of aAgNC template that is separated by a tunable hairpin spacer for the customized combination of selective recognition and signaling readout. When presenting I* in an assay route, the specific hybridization induces the directional disassembly of the bihairpin unit, on which the qMB is configurationally switched to liberate the locked split. Thus, the bifurcated parent template pair of C3GT4/C4AC4T is proximal, affording in situ nucleation and clustering of emissive aAgNC. By collecting the fluorescence signal, the quantitative detection of I* is achieved. Benefiting from the ingenious programming of qMB, the recognizing and signaling integration actuates the construction of a facile and convenient fluorescent biosensor featuring rapid reaction kinetics, a wide linear range, high sensitivity, and specificity. This would provide a new paradigm to exploit versatile qMB-based biosensing platforms via stimulation-responsive conformation switches for developing various DNA-scaffolded Ag clusters.

Simultaneous and Sensitive Sensing of Intracellular MicroRNA and mRNA for the Detection of the PI3K/AKT Signaling Pathway in Live Cells.

Simultaneous detection of the concentration variations of microRNA-221 (miRNA-221) and PTEN mRNA molecules in the PI3K/AKT signaling pathway is of significance to elucidate cancer cell migration and invasion, which is useful for cancer diagnosis and therapy. In this work, we show the biodegradable MnO2 nanosheet-assisted and target-triggered DNAzyme recycling signal amplification cascaded approach for the specific detection of the PI3K/AKT signaling pathway in live cells via simultaneous and sensitive monitoring of the variation of intracellular miRNA-221 and PTEN mRNA. Our nanoprobes enable highly sensitive and multiplexed sensing of miRNA-221 and PTEN mRNA with low detection limits of 23.6 and 0.59 pM in vitro, respectively, due to the signal amplification cascades. Importantly, the nanoprobes can be readily delivered into cancer cells and the MnO2 nanosheets can be degraded by intracellular glutathione to release the Mn2+ cofactors to trigger multiple DNAzyme recycling cycles to show highly enhanced fluorescence at different wavelengths to realize sensitive and multiplexed imaging of PTEN mRNA and miRNA-221 for detecting the PI3K/AKT signaling pathway. Moreover, the regulation of PTEN mRNA expression by miRNA-221 upon stimulation by various drugs can also be verified by our method, indicating its promising potentials for both disease diagnosis and drug screening.

pH-induced interaction mechanism of zearalenone with zein: Binding characteristics, conformational structure and intermolecular forces.

Zein-bound zearalenone (ZEN) complexes are naturally existed in maize by their spontaneous interaction, which significantly impacts the risk assessment of ZEN. Additionally, the pH levels in processing could affect the binding or release of zein-bound ZEN. In this study, pH-induced interaction mechanism of ZEN with zein were studied. Results showed that the acid conditions increased the binding constant (Ka) from 3.46 to 10.0 × 104 L/mol, binding energy from -17.38 to -43.49 kJ mol-1. By increasing hydrophobic interaction and hydrogen bond of ZEN with zein, the binding of ZEN with zein was promoted, forming zein-bound ZEN. Whereas, alkaline conditions decreased the Ka to 1.45 × 104 L/mol and binding energy to 148.48 kJ mol-1, weakened ZEN-zein interaction and stretched zein molecules, resulting the release of ZEN from zein. This study could provide important theoretical basis for perfecting risk assessment and controlling zein-bound ZEN during processing.

Antibody-Protein-Aptamer Electrochemical Biosensor based on Highly Efficient Proximity-Induced DNA Hybridization on Tetrahedral DNA Nanostructure for Sensitive Detection of Insulin-like Growth Factor-1.

Herein, an antibody-protein-aptamer electrochemical biosensor was designed by highly efficient proximity-induced DNA hybridization on a tetrahedral DNA nanostructure (TDN) for ultrasensitive detection of human insulin-like growth factor-1 (IGF-1). Impressively, the IGF-1 antibody immobilized on the top vertex of the TDN could effectively capture the target protein with less steric effect, and the ferrocene-labeled signal probe (SP) bound on the bottom vertex of the TDN was close to the electrode surface for generating a strong initial signal. In the presence of target protein IGF-1 and an aptamer strand, an antibody-protein-aptamer sandwich could be formed on the top vertex of TDN, which would trigger proximity-induced DNA hybridization to release the SP on the bottom vertex of TDN; therefore, the signal response would decrease dramatically, enhancing the sensitivity of the biosensor. As a result, the linear range of the proposed biosensor for target IGF-1 was 1 fM to 1 nM with the limit of detection down to 0.47 fM, which was much lower than that of the traditional TDN designs on electrochemical biosensors. Surprisingly, the use of this approach offered an innovative approach for the sensitive detection of biomarkers and illness diagnosis.

Covalent organic frame based high-performance nanocomposite for construction of ATP sensor.

In this work, a novel covalent organic frame (TAPT-TFPB COF) with self-enhanced photoelectric activity was prepared for decorating on conductive single-walled carbon nanotubes (SWCNT) to synthetize a high-performance photoelectric nanocomposite (COF/SWCNT), in which the interfacial charge separation and photogenerated carrier migration rate was significantly improved to obtain desiring photoelectric conversion efficiency for generating an extremely high photocurrent. Accordingly, the synthetic COF/SWCNT was ingeniously applied in the fabrication of ultrasensitive photoelectrochemical (PEC) biosensor for realizing the trace ATP detection by integrating with an Exo III-assisted dual DNA recycling amplification strategy. The recycling amplification could efficiently convert trace target ATP into plentiful output DNA, which ingeniously triggered the hybridization chain reaction (HCR) to generate a long DNA strand with substantial quencher manganese porphyrin (MnPP) loading to depress the photocurrent of COF/SWCNT. The experimental data showed that proposed biosensor had a detection range from 10 fmol L-1 to 10 nmol L-1 with the detection limit as low as 2.75 fmol L-1 (S/N = 3). In addition, this proposed biosensor showed excellent analytical performance in terms of stability, specificity and reproducibility, providing a possibility to accomplish sensitive and accurate in vitro diagnosis.

Short-stranded DNA segment-modulated LAMP/H+ as signal transducer to guide CHA-cooperated amplifiable electrochemical biosensing.

BACKGROUND: Modulating loop-mediated isothermal amplification (mLAMP) by short-stranded DNA segment trigger (T) to generate byproducts H+ ions (mLAMP/H+) as signal transducer is intriguing for developing catalytic hairpin assembly (CHA)-cooperated amplifiable electrochemical biosensors. This would be a big challenge for traditional LAMP that is basically suitable for amplifying long-stranded oligonucleotides up to 200-300 nt. To address this inherent limitation of traditional LAMP, many researchers have put in efforts to explore improvements in this that would allow LAMP to be used for a wider range of target species amplification. RESULTS: Here in this work, we are inspired to explore two-step loop-mediated amplification, firstly forming T-activated double-loop dumbbell structure (DLDS) intermediate by a recognition hairpin and a hairpin precursor, and next DLDS-guided mLAMP process with the aid of two primers to yield mLAMP/H+ during successive DNA incorporation via nucleophilic attacking interaction. To manipulate the mLAMP/H+-directed transduction of input T, a pH-responsive triplex strand is designed with the ability of self-folding in Hoogsteen structure at slightly acidic conditions, resulting in the dehybridization of a fuel strand (FS) to participate in CHA between two hairpins on the modified electrode surface, in which FS is repetitively displaced and recycled to fuel the progressive CHA events. In the as-assembled dsDNA complexes, numerous electroactive ferrocene labels are immobilized in the electrode sensing interface, thereby generating significantly amplified electrochemical current signal that can sense the presented and varied T. SIGNIFICANCE: It is clear that we have creatively constructed a unique electrochemical biosensor for disease detection. Benefited from the rational combination of mLAMP and CHA, our electrochemical strategy is highly sensitive, specific and simplified, and would provide a new paradigm to construct various mLAMP/H+-based biosensors for other short-stranded DNA or microRNAs markers.

Rigidifying AIEgens in covalent organic framework nanosheets for electrochemiluminescence enhancement: TABE-PZ-CON as a novel emitter for microRNA-21 detection.

Enhancing electrochemiluminescence (ECL) properties of luminophores is a hot direction in the current ECL field. Herein, we found that covalent rigidification of the aggregation-induced emission luminogens (AIEgens) TABE (TABE = tetra-(4-aldehyde-(1,1-biphenyl))ethylene) into covalent organic framework nanosheets (TABE-PZ-CON, PZ = piperazine) could result in stronger ECL emission than those of TABE aggregates and TABE monomers. We termed the interesting phenomenon "covalent rigidification-triggered electrochemiluminescence (CRT-ECL) enhancement". The superior ECL performance of TABE-PZ-CON not only because massive TABE luminogens were covalently assembled into the rigid TABE-PZ-CON network, which limited the intramolecular motions of TABE and hampered the radiationless transition, but also because the ultrathin porous TABE-PZ-CON significantly reduced the transportation distance of ions, electrons, and coreactants, which enabled the electrochemical excitation of more TABE luminogens and thus enhanced the ECL efficiency. Bearing in mind the exceptional ECL performance of TABE-PZ-CON, it was utilized as a high-efficient ECL indicator in combination with the DNA walker and duplex-specific nuclease-assisted target recycling amplification strategies to design an "off-on" ECL biosensor for the ultrasensitive assay of microRNA-21, exhibiting a favorable response range (100 aM-1 nM) with an ultralow detection limit of 17.9 aM. Overall, this work offers a valid way to inhibit the intramolecular motions of AIEgens for ECL enhancement, which gives a new vision for building high-performance AIEgen-based ECL materials, thus offering more chances for assembling hypersensitive ECL biosensors.

SERS-electrochemical dual-mode detection of microRNA on same interface assisted by exonuclease III signal transformation.

Dual-mode sensing has attracted more attentions which provide more accurate and reliable approach of cancer-related biomarkers. Herein, we developed a novel SERS/electrochemical dual-mode biosensor for miRNA 21 detection based on Exo III-assisted signal transformation. Firstly, the Au NPs were deposited on electrode as SERS substrate and Mn3O4/S4(DNA signal strand) was modified on Au NPs/S5 by the DNA strands S5-S4 pairing principle as hydrogen peroxide catalyst, leading to an obviously high DPV electrical signal without Raman signal. Subsequently, the presence of miRNA 21 will activate the Mn3O4/S4 to be decomposed under exonuclease III-assisted process, then the S3' chains modified with Raman molecular Cy3(Cy3-S3') is continuously connected to the Au NPs/S5 by DNA stands S5-S3' pairing principle, leading to the Raman signal response and DPV signal reduction. The biosensor shows good linear calibration curves of both SERS and electrochemical sensing modes with the detection limit of 3.98 × 10-3 nM and 6.89 × 10-5 nM, respectively. This work finds an ingenious mode for dual detection of microRNA on a same interface, which opens a new strategy for SERS and electrochemical analysis.

Pyrenecarboxaldehyde@Graphene Oxide Acted as a Highly Efficient ECL Emitter and Target-Triggered the Recyclable Cascade System as an Amplifier for Ultrasensitive APE1 Activity Detection.

Herein, pyrenecarboxaldehyde@graphene oxide (Pyc@GO) sheets with highly efficient electrochemiluminescence (ECL) as emitters were prepared by a noncovalent combination to develop a neoteric ECL biosensing platform for the ultrasensitive assessment of human apurinic/apyrimidinic endonuclease1 (APE1) activity. Impressively, the pyrenecarboxaldehyde (Pyc) molecules were able to form stable polar functional groups on the surface of GO sheets through the noncovalent π-π stacking mechanism to prevent intermolecular restacking and simultaneously generate Pyc@GO sheets. Compared with the tightly packed PAH nanocrystals, the Pyc@GO sheets significantly reduced internal filtering effects and diminished nonactivated emitters to enhance ECL intensity and achieve strong ECL emission. Furthermore, the APE1-activated initiators could trigger the recyclable cascade amplified system based on the synergistic cross-activation between catalytic hairpin assembly (CHA) and DNAzyme, which improved the signal amplification and transduction ability. Consequently, the developed ECL platform for the detection of APE1 activity displayed exceptional sensitivity with a low detection limit of 4.6 × 10-9 U·mL-1 ranging from 10-8 to 10-2 U·mL-1. Therefore, the proposed strategy holds great promise for the future development of sensitive and reliable biosensing platforms for the detection of various biomarkers.