Interaction of 2-dodecylcyclobutanone (2-DCB) and internal standard in irradiated chicken jerkies and pig ears in solid-phase microextraction (SPME)-coupled gas chromatography-mass spectrometry (GC-MS) analysis.

The radiolysis of palmitic acid in chicken jerky (CJ) and pig ears (PE) can form 2-dodecylcyclobutanone (2-DCB). A solid-phase micro extraction-coupled GC-MS technique can be used for quantitative analysis of 2-DCB with the adequate use of an internal standard (IS). The objectives of this study are to: 1) investigate the IS and 2-DCB interactions as a function of IS concentration and irradiation dose; 2) elucidate the effects of bound 2-DCB; 3) use electron paramagnetic resonance spectroscopy to complement 2-DCB measurements. The measurement of 2-DCB formed by irradiation was significantly (P < 0.05) affected by the palmitic acid content and IS concentration. The amount of 2-DCB measured in irradiated (10 kGy) CJ and PE increased 70% and 300%, respectively, when the IS concentration increased from 8 to 800 ppb. Our findings serve as a guide for the adequate use of IS for quantitative analysis of 2-DCB formed in irradiated meat matrixes.

Knowing the ABCs: teaching the principles of radiology to medical students in Turkey.

BACKGROUND: Radiology education in Turkey is mainly taught during clinical years of medical school and often lacks main principles. Exposure to the fundamentals of radiology at an early stage of medical education may drastically help students generate a better understanding of radiology and expand their interest in the specialty. With the Principles of Radiology Course that we provided, pre- and post-session tests, and assessment survey at the end of the course, we aimed to evaluate the effectiveness of such an online course among Turkish medical students. METHODS: A total of nine online sessions on imaging modalities principles was developed by radiology professors. Each session was given through Zoom by radiologists from different U.S.-institutions to Turkish medical students from state (n = 33) and private (n = 8) universities. Pretests and post-tests were given to participants via Qualtrics before and after each session, respectively. Paired two-sample t-tests were conducted to detect the variance and p=-.05 was used as the significance level. An evaluation survey was distributed at the end of the course to collect their feedback through SurveyMonkey. RESULTS: A total of 1,438 predominantly Turkish (99.32%) medical students engaged with this course. An average of 506 students completed both pre-test and post-test. There was a statistically significant (p < .001) increase in the scores in post-test (mean[range]:7.58[5.21-8.53]) relative to pre-test (mean[range]:5.10[3.52-8.53]). Four hundred and thirty-nine participants (F/M:63.33%/35.54%) completed the end-of-course survey. A total of 71% and 69.70% of the participants strongly agreed that the course would be useful in their clinical practice and had increased their understanding of radiology. They also reported that their level of confidence in the subjects had increased 68% and reached a weighted average of 3.09/4. The survey revealed that 396 (90.21%) of the participants strongly or somewhat agree that introductory principles and concepts should be presented in earlier years of medical education. Compared to in-person education, 358 (81.55%) found the course extremely or very convenient. CONCLUSION: Online lecture series consisting of the principles of the radiological imaging modalities can be offered to Turkish medical students to enhance their grasp of the various imaging modalities and their correct clinical application.

Anti-Adipogenic Activity of High-Phenolic Sorghum Brans in Pre-Adipocytes.

Obesity is one of the leading public health problems that can result in life-threatening metabolic and chronic diseases such as cardiovascular diseases, diabetes, and cancer. Sorghum (Sorghum bicolor (L.) Moench) is the fifth most important cereal crop in the world and certain genotypes of sorghum have high polyphenol content. PI570481, SC84, and commercially available sumac sorghum are high-polyphenol genotypes that have demonstrated strong anti-cancer activities in previous studies. The objective of this study was to explore a potential anti-obesity use of extracts from sorghum bran in the differentiation of 3T3-L1 preadipocytes and to investigate cellular and molecular responses in differentiated adipocytes to elucidate related mechanisms. None of the four different sorghum bran extracts (PI570481, SC84, Sumac, and white sorghum as a low-polyphenol control) caused cytotoxicity in undifferentiated and differentiated 3T3-L1 cells at doses used in this study. Sorghum bran extracts (PI570481, SC84, and Sumac) reduced intracellular lipid accumulation and expression of adipogenic and lipogenic proteins in a dose-dependent manner in differentiated 3T3-L1 cells. The same polyphenol containing sorghum bran extracts also repressed production of reactive oxygen species (ROS) and MAPK signaling pathways and repressed insulin signaling and glucose uptake in differentiated 3T3-L1 cells. These data propose a potential use of high-phenolic sorghum bran for the prevention of obesity.

Effects of moisture and temperature on Salmonella survivability in beef tallow, white grease, and chicken rendered fat.

High moisture levels introduced to fats after the rendering process can lead to Salmonella presence and growth. Limited research on strategies to eliminate pathogens in these environments are available. Rendered fat characteristics, such as water activity and fatty acids composition, may contribute to Salmonella survivability. The purpose of this research was to evaluate the effects of moisture levels (0%, 0.5%, 1%, and 3%), storage temperatures (48 and 76 ˚C), and fat characteristics on the growth and survival of Salmonella in beef tallow, white grease and poultry fat samples. Samples were inoculated with a high (~108 CFU/mL) and a low (~105 CFU/mL) Salmonella cocktail (S. Senftenberg, S. Newport, S. Thompson and S. Infantis). Samples were stored for up to 5 days at 48 and 76 ºC. Remaining population was evaluated daily with and without enrichment step. Death rates were calculated using Weibull model for each temperature and moisture level. Only temperature had an effect (P < 0.05) on Salmonella inactivation, while no effect between moisture and/or inoculum level were observed. When all products were challenged at 76 ˚C, counts were below detectable limits after 6 hours. At 48˚C a progressive decline in Salmonella population was observed within 3 days for both beef tallow and white grease when high inoculum was used for the challenge study. Salmonella was below detectable limit within 4 days for both fat types when a low inoculum was instead applied. This research identified the effect of moisture and temperature in rendered fat samples contaminated with Salmonella and underlined the need to use time-moisture-temperature data to minimize microbial growth during transportation and storage.

Antifungal Packaging Film to Maintain Quality and Control Postharvest Diseases in Strawberries.

Strawberries are a highly perishable crop with postharvest losses than reach up to 40%. Cost-effective and sustainable technologies in the form of active packing films can provide a solution. Antimicrobial packaging films were produced from pullulan polymer and Solid Lipid Nanoparticles (SLN) containing 1% w/w cinnamaldehyde. Strawberries were stored at 3 °C for 10 days and 12 °C for 6 days. Microbial and physical quality parameters were evaluated during storage. A reduction of approximately 2 Log CFU/g in yeast and mold population was observed for treated strawberries stored at 3 °C as compared to the control (p < 0.05). Yeast and molds counts were significantly lower on day 2 and 4 at 12 °C for treated samples. Strawberries packaged with the active films demonstrated lower respiration rates and the retention of bright red color at both storage temperatures. Active pullulan films were effective in maintaining the desired strawberry quality and reducing fungal decay during refrigerated storage.

An analysis of cellulose- and dextrose-based radicals in sweet potatoes as irradiation markers.

Dried sweet potatoes (SPs) are often irradiated for improved safety and shelf life. Formation of irradiation-derived radicals was analyzed using electron paramagnetic resonance (EPR) spectroscopy. These irradiation-specific radicals can be used to characterize the irradiation history of dry plant-based foods containing cellulose and sugars. The signal characteristics (intensity and peak shape) were evaluated at different sample locations (skin and flesh), as a function of sample preparation method (grinding, sieving, and pelletizing). The signal intensity was quantified using a double integration method of the peaks based on the area under the curve. The sieving caused ca. 50% decrease in total signal intensity as compared to nonsieved samples due to loss of cellulose-based radicals. The flesh of irradiated SP showed complex EPR spectra with multiple satellite peaks of cellulose radicals (333.5 and 338.8 mT) and split peak of dextrose radicals (337.4 mT); while skin spectra were distinctive of cellulose radicals. In this study, we demonstrated the effects of sample composition and preparation method on formation and analysis of irradiation-specific radicals based on EPR. PRACTICAL APPLICATION: In the last decade or so, there have been health concerns related to the consumption of irradiated pet food products. Electron paramagnetic resonance spectroscopy can be used to analyze the irradiation history of dry products containing cellulose and sugar, such as the popular dog treat dried sweet potatoes, to ensure the products were irradiated within safe limits. This work demonstrates that the formation of irradiation-specific radicals is affected by the sample location (skin and flesh) and moisture content.

Solid-phase micro extraction of food irradiation marker 2-dodecylcyclobutanone (2-DCB) from chicken jerky treated with glycerol.

The food irradiation marker, 2-dodecylcyclobutanone (2-DCB), assayed by SPME provides a fast and simple method to estimate the irradiation history of fat-containing food products. The SPME conditions were optimized to maximize the extraction of 2-DCB from chicken jerky treats (CJT) irradiated at low (5 kGy) and high (50 kGy) doses. The extracted 2-DCB was measured using GC-MS in selected ion mode (m/z 98, and 112). Water dilution (1:5) was needed to mobilize 2-DCB and allow partition to the headspace form the CJT matrix. Increasing the incubation temperature to 80 °C resulted in higher response. Spiking control jerky samples with 2-DCB from 10 to 150 ng/g CJT compared with spiking water revealed a significant food matrix effect. This method provides a fast, simple, and environmental friendly alternative for the existing solvent extraction methods.

Evaluation of heating effects on the morphology and membrane structure of Escherichia coli using electron paramagnetic resonance spectroscopy.

Bacterial cell characteristics, such as size, morphology, and membrane integrity, are affected by environmental conditions. Thermal treatment results in related structural changes, extent of which is determined by the microorganism's survival skills and inactivation kinetics. The objective of this study was to characterize changes in cell structure of Escherichia coli during heating using the combined analysis of dynamic light scattering (DLS), electron paramagnetic resonance (EPR) spectroscopy, and transmission electron microscopy (TEM) techniques. The size of E. coli cells increased from 2.3 µm to 3.0 µm with heating up to 50 °C followed by a shrinkage with further heating up to 70 °C. The morphological changes were verified using transmission electron microscopy. Related changes in membrane integrity was quantified via the mobility of 16-doxylstearic acid (16-DSA) spin probe using EPR spectroscopy. Two order parameters S1 and S2 defined on x- and y-axes, respectively, decreased with increasing temperature indicating loss of membrane integrity. The combined techniques as in this study can be used to further understand factors that play role in survival behavior of microorganisms.

Effects of different moisture and temperature levels on Salmonella survival in poultry fat.

Fat products have been historically thought to have too low water activity to harbor pathogens. However, it has been recently reported that high moisture levels in fats may lead to Salmonella presence and growth. Limited research on strategies to eliminate pathogens in these environments is available, and the mechanisms contributing to microbial presence and growth are not yet well understood. The purpose of this research was to evaluate the effects of moisture levels and storage temperatures on the growth and survival of Salmonella in poultry fat. Samples were stored for 7 d at 48°C or 76°C and remaining Salmonella was evaluated. When poultry fat was challenged with a wet high inoculum, more than a 4 log CFU/mL difference in Salmonella population was observed with 1% and 3% moisture levels at 48°C after 5 d (P < 0.05). No differences between moisture levels (P > 0.05) were observed when samples were tested with a wet low inoculum. Counts below detectable limits were observed after 24 h in samples challenged at 76°C, regardless of inoculum level. When poultry fat was stored at 48°C and inoculated with low levels of Salmonella spp., bacterial growth was influenced only by time (P < 0.05) and not affected (P > 0.05) by moisture level. However, when poultry fat was stored at 48°C and inoculated with high levels of Salmonella spp., bacterial decrease was easier (P < 0.05) in samples containing greater moisture. This research suggests that residual moisture in containers during transportation of poultry fat largely does not affect Salmonella spp. growth.

Essential Oils Against Pathogen and Spoilage Microorganisms of Fruit Juices: Use of Versatile Antimicrobial Delivery Systems.

Essential oils (EO) are increasingly used as natural antimicrobial compounds, however the effect of delivery system to enhance their antimicrobial activity has not been widely studied. Limonene (0 to 10 µL/mL) was added to microbial suspensions (∼105 CFU/mL) of selected foodborne pathogens (Listeria monocytogenes Scott A, Salmonella enterica Typhimurium, Escherichia coli and Staphylococcus aureus), and spoilage microorganisms (Lactobacillus plantarum, Saccharomyces cerevisiae, and Candida albicans). S. aureus was found to be the most sensitive foodborne pathogen while Salmonella enterica showed continued growth under all concentrations. Stable nanoemulsions and solid lipid nanoparticles (SLN) (d ∼ 170 nm) were prepared using an alkane carrier oil (n-tetradecane and n-eicosane, respectively). Interfacial effects and homogenous distribution of limonene in nanoemulsions improved its (8 and 12 µL/mL) antimicrobial effect against S. aureus. Higher aqueous concentrations as a result of expulsion from SLN further enhanced the antimicrobial activity pronounced at higher limonene concentrations. Therefore, our findings confirm that the emulsion-based delivery systems are able to effectively distribute limonene inside a microbial suspension to improve its antimicrobial activity.

Effect of Protein-Lipid-Salt Interactions on Sodium Availability in the Mouth and Consequent Perception of Saltiness: As Affected by Hydration in Powders.

There is a broad need to reformulate lower sodium food products without affecting their original taste. The present study focuses on characterizing the role of protein-salt interactions on the salt release in low-moisture systems and saltiness perception during hydration. Sodium release from freeze-dried protein powders and emulsion powders formulated at different protein/lipid ratios (5:0 to 1:4) were characterized using a chromatography column modified with a porcine tongue. Emulsion systems with protein structured at the interface were found to have faster initial sodium release rates and faster hydration and were perceived to have a higher initial salt intensity with a lower salty aftertaste. In summary, exposure of the hydrophilic segments of the interface-structured proteins in emulsions was suggested to facilitate hydration and release of sodium during dissolution of low-moisture powder samples.

Effect of Protein-Lipid-Salt Interactions on Sodium Availability in the Mouth and Consequent Perception of Saltiness: In Solutions.

The influence of protein-sodium interactions on the availability of sodium in the aqueous phase of liquid samples and consequently on the perception of saltiness was investigated. The aqueous effluents of casein and casein emulsion-salt solutions were monitored for sodium availability from a tongue column system. In the aqueous protein-salt solutions, increasing the protein/salt ratio from 1:1 to 5:1 or 10:1 significantly decreased the initial salt concentration in the effluent and resulted in a higher salt concentration in the effluent over time. Sensory analysis was in agreement. Samples with increased protein were rated as having significantly lower initial saltiness and a higher salty aftertaste. However, when casein was formulated as an emulsion, the initial release of sodium in the effluent was enhanced (compared to nonemulsified protein). Increasing the emulsion interfacial area (more hydrophilic segments of the protein were structured into the aqueous phase) resulted in a higher salt concentration in the aqueous phase and greater perceived saltiness intensity. In summary, protein interactions, specifically ionic, were reported as food interactions that influence salt perception and provide a basis to develop higher flavor quality low-sodium food products.

Localization and reactivity of a hydrophobic solute in lecithin and caseinate stabilized solid lipid nanoparticles and nanoemulsions.

The distribution and reactivity of the lipophilic spin probe 4-phenyl-2,2,5,5-tetramethyl-3-imidazoline-1-oxyl nitroxide (PTMIO) in tetradecane (C14)- and eicosane (C20)-in-water emulsions and solid lipid nanoparticles (SLN) respectively, were investigated by electron paramagnetic resonance (EPR) spectroscopy. The lipid phase (10 wt% C14 or C20) was emulsified into either caseinate solutions (1 wt%) or lecithin+bile salt dispersions (2.4 wt%+0.6 wt%) at 70-75 °C. In C14 emulsions stabilized with lecithin+bile salt, three populations of PTMIO were observed: a population in the lipid phase (~60%, a(N)~13.9 G), an aqueous phase population (~20%, a(N)~15.4 G) with high mobility, and an immobilized surface layer population (~20%, a(N)~14.2 G) with low mobility. However, in C14 emulsions stabilized by caseinate, only two distinct populations of PTMIO were seen: a lipid phase population (~70%, a(N)~13.8 G) and an aqueous phase population (~30%, a(N)~15.5 G) with high mobility. In C20 SLN stabilized with either lecithin+bile salt or caseinate, PTMIO was excluded from the lipid phase. In lecithin+bile salt-stabilized C20 SLN, the majority of the probe (~77%) was in the interfacial layer. For both surfactant systems the rate of PTMIO reduction by aqueous iron/ascorbate was greater for C20 SLN than C14 emulsions. Lecithin affects the properties of emulsions and SLN as delivery systems by providing a distinct environment for small molecules.

Solute distribution and stability in emulsion-based delivery systems: an EPR study.

Oil-in-water emulsions and related systems are often used to deliver hydrophobic solutes in foods, personal care products, and pharmaceuticals. Recent work has considered the use of crystalline lipid carrier particles (i.e., solid lipid nanoparticles, SLN) to control the availability of the solute; however, there is little direct evidence for the localization of small molecules in these systems. Alkanes (10 wt.% tetradecane or eicosane) containing the spin probe 4-phenyl-2,2,5,5-tetramethyl-3-imidazoline-1-oxyl (PTMIO, 200 ppm) were homogenized into sodium caseinate solution (1 wt.%) to produce fine or coarse droplets (0.2 µm or 1.3 µm, respectively) and cooled to 21.5 °C where eicosane is crystalline and tetradecane is liquid. Analysis of the resulting EPR spectra revealed populations of probe in two discrete environments (i.e., aqueous and lipid). PTMIO is largely hydrophobic with 77% and 70% present in the coarse and fine liquid lipid droplets (i.e., tetradecane droplets), respectively. In the solid droplets (i.e., eicosane), all of the probe was excluded from the droplets into the aqueous environment. In all cases, the mobility of the probe in both lipid and aqueous environments was affected by the droplet surface; thus, we hypothesize that the majority of the probe molecules are associated with the droplet interface. The PTMIO was reduced to an EPR-silent form by the addition of iron/ascorbate to the aqueous phase, and the apparent rate constant of the reaction was proportional to the fraction of the spin probe in the aqueous phase. Based on these findings, we propose that droplet crystallization excludes solute molecules from the droplet core to the aqueous environment where they interact with the droplet surface.

Ultrasonic characterization of lactose crystallization in gelatin gels.

Ultrasonic velocity and attenuation measurements (2.25 MHz center frequency) were used to follow bulk crystallization of lactose (43% and 46%) from gelatin (1.5% and 3%) gels at 25 °C, and compared to turbidity (500 nm) and isothermal calorimetric measurements. Ultrasonic velocity decreased slightly (approximately 0.5%) during crystallization while ultrasonic attenuation was low in the absence of lactose crystals and increased progressively during crystallization. The lag time before the onset of crystallization decreased and the maximum rate of increase in attenuation during crystallization increased with increasing lactose supersaturation but was not affected by gelatin concentration (P < 0.05). Similar results were seen in turbidity and isothermal calorimetric measurements. Ultrasonic attenuation measurements have the potential to measure crystallization kinetics in complex food matrices and to be applied on-line. Practical Application: Many foods contain crystals that affect their taste and texture (for example, lactose crystals can give a grainy defect in ice cream). The formation of crystals is often hard to predict so methods to measure the development of crystals inside real foods are useful. In this study, we show that as lactose crystallizes in a gelatin gel the ultrasonic attenuation--capacity to absorb sound--increases and can be related to the amount of crystals present. Ultrasound is easier to apply in real food processing than the existing methodologies.