Recent progress in the genotyping of bovine tuberculosis and its rapid diagnosis via nanoparticle-based electrochemical biosensors.

Bovine tuberculosis (bTB) is considered a worldwide infectious zoonotic disease. Mycobacterium bovis causes bTB disease. It is one of the Mycobacterium tuberculosis complex (MTBC) members. MTBC is a clonal complex of close relatives with approximately 99.95% similarity. M. bovis is a spillover pathogen that can transmit from animals to humans and rarely from humans to animals with contact. Genotyping techniques are important to discriminate and differentiate between MTBC species. Spoligotyping and mycobacterial interspersed repetitive unit-variable number tandem repeat (MIRU-VNTR) are widely used but they have some limitations. As an alternative, whole genome sequencing approaches have been utilized due to their high-resolution power. They are employed in typing M. bovis and explain the evolutionary and phylogenetic relationships between isolates. The control of bTB disease has attracted a large amount of attention. Rapid and proper diagnosis is necessary for monitoring the disease as an initial step for its control and treatment. Nanotechnology has a potential impact on the rapid diagnosis and treatment of bTB through the use of nanocarrier and metal nanoparticles (NPs). Special attention has been paid to voltammetric and impedimetric electrochemical strategies as facile, sensitive, and selective methods for the efficient detection of tuberculosis. The efficacy of these sensors is enhanced in the presence of NPs, which act as recognition and/or redox probes. Gold, silver, copper, cobalt, graphene, and magnetic NPs, as well as polypyrrole nanowires and multiwalled carbon nanotubes have been employed for detecting tuberculosis. Overall, NP-based electrochemical sensors represent a promising tool for the diagnosis of bTB.

Conducting dyes as electro-active monomers and polymers for detecting analytes in biological and environmental samples.

Currently, electrochemical sensors are regarded as an efficient tool for the biological and environmental sensing. Electrochemical sensors, such as voltammetric, amperometric, and impedimetric sensors, have gained great attention due to their simplicity, sensitivity, and selectivity. The performance of these electrochemical sensors could be enhanced by surface engineered nano/micro structured materials with conducting dyes/redox species. In this review, a great focus has been put on the redox-active dyes because of their electronic, optical, electrochromic, and conductivity properties. The mechanisms of oxidation and subsequent polymerization of different redox-active dyes at the surface of electrodes have been studied. Additionally, their role in catalyzing the oxidation or reduction of the target analytes at the surfaces of electrodes has also been highlighted. The redox-active dyes were used as electrochemical probes for detecting various analytes in biological and environmental samples. Overall, redox-active dyes are considered promising conducting polymers for the assessment of many analytes such as drugs, pesticides, surfactants, and heavy metal ions.

Biosynthesized silver nanoparticles for electrochemical detection of bromocresol green in river water.

In this study, silver nanoparticles (AgNPs)-based electrochemical sensor has been reported for assessing bromocresol green (BG) in river water. Firstly, AgNPs were greenly produced using the aqueous extract of Ficus sycomorus leaves. Then, the AgNP-modified glassy carbon (GC) electrode was prepared using the sticking method. AgNPs were characterized using transmission electron microscope (TEM), X-ray diffraction (XRD), square wave voltammetry (SWV) and scanning electron microscope (SEM). TEM and SEM were used for determining the size of AgNPs before and after adsorption, respectively. The results show that there was an increase in AgNP size from 20 to 30 nm. Additionally, XRD was used for characterizing the crystal nature of AgNPs, while SWV exhibited a characteristic oxidation peak of AgNPs at 0.06 V. Moreover, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used for characterizing the catalytic effect of AgNPs. BG as a targeted pollutant was detected at AgNPs/GC based on its oxidation through proton and electron transfer. Two peaks corresponding to the monomer and polymer oxidation were detected. The monomer- and polymer-based sensors have revealed a linear range of 2.9 × 10-5 to 2.1 × 10-4 mole l-1 and low detection limits (LODs) of 1.5 × 10-5 and 1.3 × 10-5 mole l-1, respectively.

Mucilage-capped silver nanoparticles for glucose electrochemical sensing and fuel cell applications.

A simple, cost-effective and green mucilage-capped silver nanoparticles (Mucilage-AgNPs) modified glassy carbon electrode (GC) composite was constructed for efficient and facile electrochemical oxidation of glucose for the first time. Mucilage-AgNPs were synthesized through the direct chemical reduction of Ag+ by mucilage extracted from Opuntia ficus-indica. Mucilage-AgNPs were identified and characterized using ultraviolet-visible spectroscopy, transmission electron microscopy and square wave voltammetry. Modification of the GC with AgNPs was carried out via a transfer-sticking technique with an immobilization time of 1 h. The Mucilage-AgNPs/GC composite was studied as a possible anode for glucose oxidation in a biofuel cell. The composite resulted in glucose oxidation with a current density and power density of 85.7 µA cm-2 and 25.7 µW cm-2, respectively. Glucose sensing using the Mucilage-AgNPs/GC composite was achieved successfully via two pathways: glucose oxidation and AgNP inhibition. The glucose oxidation-based sensor showed a lower detection limit of 0.01 mM and a linear range of 0.01 to 2.2 mM. The AgNPs inhibition-based sensor provides an indirect determination pathway of glucose with a detection limit of 0.1 mM and a linear range of 0.1 to 1.9 mM. AgNP inhibition is a novel pathway that could be used for determining a large number of organic and inorganic molecules. Overall, the Mucilage-AgNPs/GC is considered a pioneering composite for glucose sensing and fuel cell applications.

Innovative natural polymer metal nanocomposites and their antimicrobial activity.

Metal based nanocomposites are gaining popularity for the past few years due to their promising chemical and physical properties. These nanocomposites can be obtained by incorporation of metal nanoparticles with glass, ceramic and polymer. Metal polymer nanoparticles can be formed through direct reduction method, in situ methods like chemical reduction, photoreduction and thermal decomposition of metallic salt inside the polymer, ex-situ by direct insertion of metallic nanoparticles into the polymer, through vapor phase deposition techniques and ion implantation. Natural polymers such as cellulose, starch, chitin, chitosan, gelatin, dextran, alginate, pectin, guar gum, rubber and fibrin are preferred than the synthetic ones due to their amazing properties including maximized purity and crystallinity, tensile solidity, improved elasticity and extensive surface area. In our review, we spotlight the fabrication methods and the innovative applications of many natural polymers metal nanocomposites, as well as their antibacterial efficacy against Escherichia coli and Staphylococcus aureus.