Magnetic Nanowires for Nanobarcoding and Beyond.

Multifunctional magnetic nanowires (MNWs) have been studied intensively over the last decades, in diverse applications. Numerous MNW-based systems have been introduced, initially for fundamental studies and later for sensing applications such as biolabeling and nanobarcoding. Remote sensing of MNWs for authentication and/or anti-counterfeiting is not only limited to engineering their properties, but also requires reliable sensing and decoding platforms. We review the latest progress in designing MNWs that have been, and are being, introduced as nanobarcodes, along with the pros and cons of the proposed sensing and decoding methods. Based on our review, we determine fundamental challenges and suggest future directions for research that will unleash the full potential of MNWs for nanobarcoding applications.

Realizing the Principles for Remote and Selective Detection of Cancer Cells Using Magnetic Nanowires.

The unmet demand for selective and remote detection of biological entities has urged nanobiotechnology to prioritize the innovation of biolabels that can be remotely detected. Magnetic nanowires (MNWs) have been deemed promising for remote detection as the magnetic fields can deeply and safely penetrate into tissue. However, the overlapping nature of the magnetic signatures has been a long-standing challenge for selective detection, which we resolve here. To do so, 13 types of MNWs with unique irreversible switching field (ISF) signatures were synthesized for labeling canine osteosarcoma (OSCA-8) cancer cells (one set) and polycarbonate biopolymers (12 sets). After characterizing the ISF signature of each MNW type, the MNW-labeled cancer cells were transferred onto MNW-labeled biopolymers to determine the most distinguishable ISF signatures and to discern the principles for reliable selective detection of biological entities. We show that tailoring the ISF of MNWs by tuning their coercivity is a highly effective approach for generating distinct magnetic biolabels for selective detection of cells. These findings smooth the path for the progression of nanobiotechnology by enabling the remote and selective detection of biological entities using MNWs.

Selective Detection of Cancer Cells Using Magnetic Nanowires.

The main bottleneck for implementing magnetic nanowires (MNWs) in cell-biology research for multimodal therapeutics is the inapplicability of the current state of the art for selective detection and stimulation of MNWs. Here, we introduce a methodology for selective detection of MNWs in platforms that have multiple magnetic signals, such as future multimodal therapeutics. After characterizing the signatures of MNWs, MNWs were surface-functionalized and internalized into canine osteosarcoma (OSCA-8) cancer cells for cell labeling, manipulation, and separation. We also prepared and characterized magnetic biopolymers as multimodal platforms for future use in controlling the movement, growth, and division of cancer cells. First, it is important to have methods for distinguishing the magnetic signature of the biopolymer from the magnetically labeled cells. For this purpose, we use the projection method to selectively detect and demultiplex the magnetic signatures of MNWs inside cells from those inside magnetic biopolymers. We show that tailoring the irreversible switching field of MNWs by tuning their coercivity is a highly effective approach for generating distinct magnetic biolabels for selective detection of cancer cells. These findings open up new possibilities for selective stimulation of MNWs in multimodal therapeutic platforms for drug delivery, hyperthermia cancer therapy, and mitigating cancer cell movement and proliferation.

Unlocking the decoding of unknown magnetic nanobarcode signatures.

Magnetic nanowires (MNWs) rank among the most promising multifunctional magnetic nanomaterials for nanobarcoding applications owing to their safety, nontoxicity, and remote decoding using a single magnetic excitation source. Until recently, coercivity and saturation magnetization have been proposed as encoding parameters. Herein, backward remanence magnetization (BRM) is used to decode unknown remanence spectra of MNWs-based nanobarcodes. A simple and fast expectation algorithm is proposed to decode the unknown remanence spectra with a success rate of 86% even though the MNWs have similar coercivities, which cannot be accomplished by other decoding schemes. Our experimental approach and analytical analysis open a promising direction towards reliably decoding magnetic nanobarcodes to expand their capabilities for security and labeling applications.

Facile decoding of quantitative signatures from magnetic nanowire arrays.

Magnetic nanoparticles have been proposed as contact-free minimal-background nanobarcodes, and yet it has been difficult to rapidly and reliably decode them in an assembly. Here, high aspect ratio nanoparticles, or magnetic nanowires (MNWs), are characterized using first-order reversal curves (FORC) to investigate quantitative decoding. We have synthesized four types of nanowires (differing in diameter) that might be used for barcoding, and identified four possible "signature" functions that might be used to quickly distinguish them. To test this, we have measured the signatures of several combination samples containing two or four different MNW types, and fit them to linear combinations of the individual type signatures to determine the volume ratios of the types. We find that the signature which determines the ratios most accurately involves only the slope of each FORC at its reversal field, which requires only 2-4 data points per FORC curve, reducing the measurement time by a factor of 10 to 50 compared to measuring the full FORC.

Isolation of Cancer-Derived Exosomes Using a Variety of Magnetic Nanostructures: From Fe3O4 Nanoparticles to Ni Nanowires.

Isolating and analyzing tumor-derived exosomes (TEX) can provide important information about the state of a tumor, facilitating early diagnosis and prognosis. Since current isolation methods are mostly laborious and expensive, we propose herein a fast and cost-effective method based on a magnetic nanoplatform to isolate TEX. In this work, we have tested our method using three magnetic nanostructures: (i) Ni magnetic nanowires (MNWs) (1500 × 40 nm), (ii) Fe3O4 nanorods (NRs) (41 × 7 nm), and (iii) Fe3O4 cube-octahedral magnetosomes (MGs) (45 nm) obtained from magnetotactic bacteria. The magnetic response of these nanostructures has been characterized, and we have followed their internalization inside canine osteosarcoma OSCA-8 cells. An overall depiction has been obtained using a combination of Fluorescence and Scanning Electron Microscopies. In addition, Transmission Electron Microscopy images have shown that the nanostructures, with different signs of degradation, ended up being incorporated in endosomal compartments inside the cells. Small intra-endosomal vesicles that could be precursors for TEX have also been identified. Finally, TEX have been isolated using our magnetic isolation method and analyzed with a Nanoparticle tracking analyzer (NanoSight). We observed that the amount and purity of TEX isolated magnetically with MNWs was higher than with NRs and MGs, and they were close to the results obtained using conventional non-magnetic isolation methods.

Projection method as a probe for multiplexing/demultiplexing of magnetically enriched biological tissues.

The unmet demand for cheap, accurate, and fast multiplexing of biomarkers has urged nanobiotechnology to prioritize the invention of new biomarkers that make feasible the remote detection, identification, and quantification of biological units, such as regenerative tissues. Here, we introduce a novel approach that highlights magnetic nanowires (MNWs) with such capabilities. This method employs the stable magnetization states of MNWs as a unique characteristic that can be realized by projecting the MNWs' switching field on the backward field (P Hb), also known as the irreversible switching field. Experimentally, several types of MNWs were directly synthesized inside polycarbonate tissues and their P Hb characteristics were measured and analyzed. Our results show that the P Hb gives an excellent identification and quantification characteristic for demultiplexing MNWs embedded in these tissues. Furthermore, this method significantly improves the characterization speed by a factor of 50×-100× that makes it superior to the current state of the art that ceased the progression of magnetic nanoparticles in multiplexing/demultiplexing applications.

Polyacrylamide Ferrogels with Ni Nanowires.

Nickel magnetic nanowires (NWs) have attracted significant attention due to their unique properties, which are useful for basic studies and technological applications, for example in biomedicine. Their structure and magnetic properties were systematically studied in the recent years. In this work, Ni NWs with high aspect ratios (length/diameter ~250) were fabricated by electrodeposition into commercial anodic aluminum oxide templates. The templates were then etched and the NWs were suspended in water, where their hydrodynamic size was evaluated by dynamic light scattering. The magnetic response of these NWs as a function of an external magnetic field indicates a dominant shape anisotropy with propagation of the vortex domain wall as the main magnetization reversal process. The suspension of Ni NWs was used in the synthesis of two types of polyacrylamide ferrogels (FGs) by free radical polymerization, with weight fractions of Ni NWs in FGs of 0.036% and 0.169%. The FGs were reasonably homogeneous. The magnetic response of these FGs (hysteresis loops) indicated that the NWs are randomly oriented inside the FG, and their magnetic response remains stable after embedding.

Scalable Top-Down Approach Tailored by Interferometric Lithography to Achieve Large-Area Single-Mode GaN Nanowire Laser Arrays on Sapphire Substrate.

GaN nanowires are promising for optical and optoelectronic applications because of their waveguiding properties and large optical band gap. However, developing a precise, scalable, and cost-effective fabrication method with a high degree of controllability to obtain high-aspect-ratio nanowires with high optical properties and minimum crystal defects remains a challenge. Here, we present a scalable two-step top-down approach using interferometric lithography, for which parameters can be controlled precisely to achieve highly ordered arrays of nanowires with excellent quality and desired aspect ratios. The wet-etch mechanism is investigated, and the etch rates of m-planes {11̅00} (sidewalls) were measured to be 2.5 to 70 nm/h depending on the Si doping concentration. Using this method, uniform nanowire arrays were achieved over a large area (>105 µm2) with an spect ratio as large as 50, a radius as small as 17 nm, and atomic-scale sidewall roughness (<1 nm). FDTD modeling demonstrated HE11 is the dominant transverse mode in the nanowires with a radius of sub-100 nm, and single-mode lasing from vertical cavity nanowire arrays with different doping concentrations on a sapphire substrate was interestingly observed in photoluminescence measurements. High Q-factors of ∼1139-2443 were obtained in nanowire array lasers with a radius and length of 65 nm and 2 µm, respectively, corresponding to a line width of 0.32-0.15 nm (minimum threshold of 3.31 MW/cm2). Our results show that fabrication of high-quality GaN nanowire arrays with adaptable aspect ratio and large-area uniformity is feasible through a top-down approach using interferometric lithography and is promising for fabrication of III-nitride-based nanophotonic devices (radial/axial) on the original substrate.