The ultrastructure of the apical organ of the Müller's larva of the tiger flatworm Prostheceraeus crozieri.

The tiger flatworm Prostheceraeus crozieri (Polycladida) develops via an eight-lobed, and three-eyed planktonic Müller's larva. This larva has an apical organ, ultrastructural details of which remain elusive due to a scarcity of studies. The evolution and possible homology of the polyclad larva with other spiralian larvae is still controversial. Here, we provide ultrastructural data and three-dimensional reconstructions of the apical organ of P. crozieri. The apical organ consists of an apical tuft complex and a dorso-apical tuft complex. The apical tuft complex features a central tuft of five long cilia, which emerge from four or five individual cells that are themselves encircled by two anchor cells. The necks of six multibranched gland cells are sandwiched between ciliated tuft cell bodies and anchor cells. The proximal parts of the ciliated cell bodies are in contact with the lateral brain neuropil via gap junctions. Located dorsally of the apical tuft complex, the dorso-apical tuft complex is characterized by several long cilia of sensory neurons, these emerge from an epidermal lumen and are closely associated with several gland cells that form a crescent apically around the dorsal anchor cell, and laterally touch the brain neuropil. Such ciliated sensory neurons emerging from a ciliated lumen are reminiscent of ampullary cells of mollusc and annelid larvae; a similar cell type can be found in the hoplonemertean decidula larva. We hypothesize that the ampullary-like cells and the tuft-forming sensory cells in the apical organs of these spiralian larvae could be homologous.

Correlating whole sample EDS and Raman mappings - A case study of a Chelyabinsk meteorite fragment.

Whole sample microscopy mappings are of interest in many cases as they provide analytical information of phases varying in size by orders of magnitude and in composition across the sample. These benefits are amplified if more than one microscopic technique is used for the mappings. However, to take full advantage of correlative whole sample mappings, the data of each technique has to be carefully prepared, treated, correlated and evaluated. With this work, we want to present the key steps of our data treatment approach as well as the results on an exemplary sample, the Chelyabinsk meteorite. The most important step in our data treatment approach is to start by evaluating the spectral maps separately as far as possible (at-% quantification for EDS for example) and then generate pseudo spectral maps from this evaluation in the form of image stacks. This allows us to preserve the advantages of specialized software packages and standard work flows for every spectral mapping, whilst also unifying the data format and compressing the data sufficiently for correlation and the application of machine learning tools. We have performed whole sample mappings using SEM, EDS and Raman on a cross-section of a Chelyabinsk meteorite fragment, roughly 1.0cm × 0.8cm large. Combining these mappings into a single "super" spectral map, we were able to produce a uniquely detailed mapping of the composition of the meteorite fragment, as well as perform a quantitative analysis of the elemental composition of several crystallographic phases. The results of our compositional analysis; olivine (Fo72Fa28), pyroxene (≈ 97 % En80Fs20Wo0 and 3 % En56Fs6Wo38), feldspar (albite), troilite, FeNi (taenite and kamacite), merrillite, chromite and hydroxyapatite; agree qualitatively with other reports from literature.

The complex synaptic pathways onto a looming-detector neuron revealed using serial block-face scanning electron microscopy.

The ability of locusts to detect looming stimuli and avoid collisions or predators depends on a neuronal circuit in the locust's optic lobe. Although comprehensively studied for over three decades, there are still major questions about the computational steps of this circuit. We used fourth instar larvae of Locusta migratoria to describe the connection between the lobula giant movement detector 1 (LGMD1) neuron in the lobula complex and the upstream neuropil, the medulla. Serial block-face scanning electron microscopy (SBEM) was used to characterize the morphology of the connecting neurons termed trans-medullary afferent (TmA) neurons and their synaptic connectivity. This enabled us to trace neurons over several hundred micrometers between the medulla and the lobula complex while identifying their synapses. We traced two different TmA neurons, each from a different individual, from their synapses with the LGMD in the lobula complex up into the medulla and describe their synaptic relationships. There is not a simple downstream transmission of the signal from a lamina neuron onto these TmA neurons; there is also a feedback loop in place with TmA neurons making outputs as well as receiving inputs. More than one type of neuron shapes the signal of the TmA neurons in the medulla. We found both columnar and trans-columnar neurons connected with the traced TmA neurons in the medulla. These findings indicate that there are computational steps in the medulla that have not been included in models of the neuronal pathway for looming detection.

(Un)expected Similarity of the Temporary Adhesive Systems of Marine, Brackish, and Freshwater Flatworms.

Many free-living flatworms have evolved a temporary adhesion system, which allows them to quickly attach to and release from diverse substrates. In the marine Macrostomum lignano, the morphology of the adhesive system and the adhesion-related proteins have been characterised. However, little is known about how temporary adhesion is performed in other aquatic environments. Here, we performed a 3D reconstruction of the M. lignano adhesive organ and compared it to the morphology of five selected Macrostomum, representing two marine, one brackish, and two freshwater species. We compared the protein domains of the two adhesive proteins, as well as an anchor cell-specific intermediate filament. We analysed the gene expression of these proteins by in situ hybridisation and performed functional knockdowns with RNA interference. Remarkably, there are almost no differences in terms of morphology, protein regions, and gene expression based on marine, brackish, and freshwater habitats. This implies that glue components produced by macrostomids are conserved among species, and this set of two-component glue functions from low to high salinity. These findings could contribute to the development of novel reversible biomimetic glues that work in all wet environments and could have applications in drug delivery systems, tissue adhesives, or wound dressings.

Correlative SEM-Raman microscopy to reveal nanoplastics in complex environments.

Nowadays "microplastics" (MPs) is an already well-known term and results of micro-sized particles found in consumer products or environments are regularly reported. However, studies of native MPs smaller than 1 µm, often referred to as nanoplastics (NPs), in analytically challenging environments are rare. In this study, a correlative approach between scanning electron microscopy and Raman microscopy is tested to meet the challenges of finding and identifying NPs in the 100 nm range in various environments, ranging from ideal (distilled water) to challenging (sea salt, human amniotic fluid). To test the viability of this approach in principle, standardized polystyrene beads (Ø 200 nm) are mixed into the various environments in different concentrations. Promising detection limits of 2 10-3 µg/L (distilled water), 20 µg/L (sea salt) and 200 µg/L (human amniotic fluid) are found. To test the approach in practices both sea salt and amniotic fluid are analysed for native NPs as well. Interestingly a nylon-NP was found in the amniotic fluid, maybe originating from the sampling device. However, the practical test reveals limitations, especially with regard to the reliable identification of unknown NPs by Raman microscopy, due to strong background signals from the environments. We conclude from this in combination with the excellent performance in distilled water that a combination of this approach with an advanced sample preparation technique would yield a powerful tool for the analysis of NPs in various environments.

The combination of Raman microscopy and electron microscopy - Practical considerations of the influence of vacuum on Raman microscopy.

Due to the specific vacuum requirements for scanning electron microscopy (SEM), the Raman microscope has to operate in vacuum in a correlative Raman-SEM, which is a type of microscope combination that has recently increased in popularity. This works considers the implications of conducting Raman microscopy under vacuum, as opposed to operating in ambient air, the standard working regime of this technique. We show that the performance of the optics of the Raman microscope are identical in both conditions, but laser beam-sample interactions, such as fluorescent bleaching and beam damage, might be different due to the lack of oxygen in vacuum. The bleaching of the fluorescent background appears to be mostly unaffected by the lack of oxygen, except when very low laser powers are used. Regarding laser-beam damage, organic samples are more sensitive in vacuum than in air, whereas no definite verdict is possible for inorganic samples. These findings have practical implications for the application of correlative Raman-SEM, as low laser powers, or in extreme cases cryo-methods, need to be used for organic samples that appear only moderately beam sensitive under usual ambient air.

How cellulose nanofibrils and cellulose microparticles impact paper strength-A visualization approach.

Cellulosic nanomaterials are in the focus of academia and industry to realize light-weight biobased materials with remarkable strength. While the effect is well known, the distribution of these nanomaterials are less explored, particularly for paper sheets. Here, we explore the 3D distribution of micro and nanosized cellulosic particles in paper sheets and correlate their extent of fibrillation to the distribution inside the sheets and subsequently to paper properties. To overcome challenges with contrast between the particles and the matrix, we attached probes on the cellulose nano/microparticles, either by covalent attachment of fluorescent dyes or by physical deposition of cobalt ferrite nanoparticles. The increased contrast enabled visualization of the micro and nanosized particles inside the paper matrix using multiphoton microscopy, X-ray microtomography and SEM-EDX. The results indicate that fibrillary fines enrich at pores and fiber-fiber junctions, thereby increasing the relative bonded area between fibers to enhance paper strength while CNF seems to additionally form an inner 3D network.

Fine Cellulosic Materials Produced from Chemical Pulp: the Combined Effect of Morphology and Rate of Addition on Paper Properties.

Among bio-based reinforcement additives for paper existing on the market, microfibrillated cellulose (MFC) turned out to be a promising material, showing outstanding potential in composites science. Its relevance in papermaking as a new family of paper components was suggested more recently. There remains a number of constraints limiting the promotion of their use in papermaking, mostly related to their high cost and effect on dewatering resistance. Also, contrasting results reported in the literature suggest that the effect of fibrillation rate and quantity of such cellulosic additives in a furnish on the technological paper properties needs further research. The purpose of this study is to produce and characterize different MFC-like fine fibrous materials of varying particle size and degree of fibrillation from the same batch of pulp through mechanical treatment or fractionation. The effect of the thus obtained fine fibrous materials on paper properties is evaluated with respect to their concentration within a fiber furnish. We compared: (i) a mixture of primary and secondary fines isolated from the pulp by means of a purpose-built laboratory pressure screen; (ii) MFC-like fine fibrous materials of increasingly fibrillar character obtained by refining and subsequent steps of high-pressure homogenization. The morphology of the different materials was first characterized using flow cell based and microscopic techniques. The thus obtained materials were then applied in handsheet forming in blends of different proportions to evaluate their influence on paper properties. The results of these experiments indicate that all these products lead to a substantial decrease in air permeability and to improved mechanical properties already at low concentration, independent of the type and morphological character of the added fine cellulosic material. At higher addition rates, only highly fibrillated materials allowed a further considerable increase in tensile and z-strength. These observations should help to allow a more targeted application of this new generation of materials in papermaking, depending on the desired application.

Deposition of Cellulose-Based Thin Films on Flexible Substrates.

This study investigates flexible (polyamide 6.6 PA-6.6, polyethylene terephthalate PET, Cu, Al, and Ni foils) and, for comparison, stiff substrates (silicon wafers and glass) differing in, for example, in surface free energy and surface roughness and their ability to host cellulose-based thin films. Trimethylsilyl cellulose (TMSC), a hydrophobic acid-labile cellulose derivative, was deposited on these substrates and subjected to spin coating. For all the synthetic polymer and metal substrates, rather homogenous films were obtained, where the thickness and the roughness of the films correlated with the substrate roughness and its surface free energy. A particular case was the TMSC layer on the copper foil, which exhibited superhydrophobicity caused by the microstructuring of the copper substrate. After the investigation of TMSC film formation, the conversion to cellulose using acidic vapors of HCl was attempted. While for the polymer foils, as well as for glass and silicon, rather homogenous and smooth cellulose films were obtained, for the metal foils, there is a competing reaction between the formation of metal chlorides and the generation of cellulose. We observed particles corresponding to the metal chlorides, while we could not detect any cellulose thin films after HCl treatment of the metal foils as proven by cross-section imaging using scanning electron microscopy (SEM).

Green Procedure to Manufacture Nanoparticle-Decorated Paper Substrates.

For this study, a paper impregnated with silver nanoparticles (AgNPs) was prepared. To prepare the substrates, aqueous suspensions of pulp fines, a side product from the paper production, were mixed with AgNP suspensions. The nanoparticle (NP) synthesis was then carried out via laser ablation of pure Ag in water. After the sheet formation process, the leaching of the AgNPs was determined to be low while the sheets exhibited antimicrobial activity toward Escherichia coli (E. coli).

Application of Industrially Produced Chitosan in the Surface Treatment of Fibre-Based Material: Effect of Drying Method and Number of Coating Layers on Mechanical and Barrier Properties.

Chitosan is a versatile biopolymer with many interesting functionalities. Its effects on the barrier and mechanical properties of single- or double-coated fibre-based packaging papers in dependence on the applied drying regime were successfully tested. Our investigations revealed chitosan to be a highly robust biopolymer, since the different drying regimes did not alter its contribution to the development of strength and barrier properties of the coated packaging papers. These properties showed a stronger influence of the applied coat weights than of the different drying regimes. The effect of chitosan coatings were quantified by measuring tensile strength (TS), burst strength (BS) and tensile energy absorption (TEA). These revealed that TS, BS and TEA of the coated papers increased significantly. Moreover, the chitosan-coated papers were less permeable against water vapor and air. High grease resistance was observed for double-coated papers, irrespective of the drying regimes. The coated paper surface showed a more hydrophilic character, resulting in lower contact angles and higher water absorption properties. In this study, industrially produced chitosan has been proven to be a renewable, robust biopolymer that can be utilized as an additive to increase strength and the barrier properties of fibre-based materials.

Nonspecific protein adsorption on cationically modified Lyocell fibers monitored by zeta potential measurements.

Nonspecific protein deposition on Lyocell fibers via a cationization step was explored by adsorption of two different N,N,N-trimethyl chitosan chlorides (TMCs). Both, the cationization and the subsequent protein deposition steps were performed and monitored in situ by evaluating the zeta potential using the streaming potential method. Both employed TMCs (degree of substitution with N+Me3Cl groups: 0.27 and 0.64) irreversibly adsorb on the fibers as proven by charge reversal (-12 to +7mV for both derivatives) after the final rinsing step. Onto these cationized fibers, BSA was deposited at different pH values (4, 5, and 7). Charge titrations revealed that close to the isoelectric point of BSA (4.7), BSA deposition was particularly favored, while at lower pH values (pH 4), hardly any adsorption took place due to electrostatic repulsion of the cationic fibers and the positively charged BSA. This work sets the foundation for further investigations to use zeta potential measurements for protein adsorption studies on fibrous materials.

Morphological Properties of Methacrylate-Based Polymer Monoliths: From Gel Porosity to Macroscopic Inhomogeneities.

Shaping chemical interfaces of hard and soft matter materials into physical morphologies that guarantee excellent transport properties is of central importance for technologies relying on adsorption, separation, and reaction at the interface. Polymer monoliths with a hierarchically structured pore space, for example, are widely used in flow-driven processes, whose efficiency depends on the morphology of the support material over several length scales. Compared with alternative support structures, particularly silica monoliths, polymer monoliths yield lower efficiency, which suggests a suboptimal morphology. Based on physical reconstruction by serial block-face scanning electron microscopy we evaluate the structural features of a methacrylate-based polymer monolith from the pore scale to the column scale. The morphological data reveal a homogeneous polymer skeleton with a solute-impenetrable core-porous shell architecture and a heterogeneous macropore space that suffers from inhomogeneities at the short-range and the transcolumn scale. Although the morphology of the polymer phase is favorable to efficient mass transport, the performance of the polymer monolith is limited by severe transcolumn gradients in macroporosity and macropore size. We propose to overcome these morphological limitations by pursuing a preparation strategy that involves active rather than passive shaping of the macropore space, for example, by using silica monoliths as templating structures for polymer monolith preparation.

Pulp Fines-Characterization, Sheet Formation, and Comparison to Microfibrillated Cellulose.

In the pulp and paper industry different types of pulp or fiber fines are generated during the pulping (primary fines, mechanical fines), and/or the refining process (secondary fines). Besides fibers, these cellulosic microparticles are a further component of the paper network. Fines, which are defined as the fraction of pulp that is able to pass through a mesh screen or a perforated plate having a hole diameter of 76 µm, are known to influence the properties of the final paper product. To better understand the effect and properties of this material, fines have to be separated from the pulp and investigated as an independent material. In the present study, fines are isolated from the pulp fraction by means of a laboratory pressure screen. To allow for further processing, the solids content of the produced fines suspension was increased using dissolved air flotation. Morphological properties of different types of fines and other cellulosic microparticles, such as microfibrillated celluloses (MFC) are determined and compared to each other. Furthermore, handsheets are prepared from these materials and properties, such as apparent density, contact angle, modulus of elasticity, and strain are measured giving similar results for the analyzed types of fines in comparison to the tested MFC grades. The analysis of the properties of fiber fines contributes on the one hand to a better understanding of how these materials influences the final paper products, and on the other hand, helps in identifying other potential applications of this material.

Two identified looming detectors in the locust: ubiquitous lateral connections among their inputs contribute to selective responses to looming objects.

In locusts, two lobula giant movement detector neurons (LGMDs) act as looming object detectors. Their reproducible responses to looming and their ethological significance makes them models for single neuron computation. But there is no comprehensive picture of the neurons that connect directly to each LGMD. We used high-through-put serial block-face scanning-electron-microscopy to reconstruct the network of input-synapses onto the LGMDs over spatial scales ranging from single synapses and small circuits, up to dendritic branches and total excitatory input. Reconstructions reveal that many trans-medullary-afferents (TmAs) connect the eye with each LGMD, one TmA per facet per LGMD. But when a TmA synapses with an LGMD it also connects laterally with another TmA. These inter-TmA synapses are always reciprocal. Total excitatory input to the LGMD 1 and 2 comes from 131,000 and 186,000 synapses reaching densities of 3.1 and 2.6 synapses per µm2 respectively. We explored the computational consequences of reciprocal synapses between each TmA and 6 others from neighbouring columns. Since any lateral interactions between LGMD inputs have always been inhibitory we may assume these reciprocal lateral connections are most likely inhibitory. Such reciprocal inhibitory synapses increased the LGMD's selectivity for looming over passing objects, particularly at the beginning of object approach.

Optimizing the 3D-reconstruction technique for serial block-face scanning electron microscopy.

BACKGROUND: Elucidating the anatomy of neuronal circuits and localizing the synaptic connections between neurons, can give us important insights in how the neuronal circuits work. We are using serial block-face scanning electron microscopy (SBEM) to investigate the anatomy of a collision detection circuit including the Lobula Giant Movement Detector (LGMD) neuron in the locust, Locusta migratoria. For this, thousands of serial electron micrographs are produced that allow us to trace the neuronal branching pattern. NEW METHOD: The reconstruction of neurons was previously done manually by drawing cell outlines of each cell in each image separately. This approach was very time consuming and troublesome. To make the process more efficient a new interactive software was developed. It uses the contrast between the neuron under investigation and its surrounding for semi-automatic segmentation. RESULTS: For segmentation the user sets starting regions manually and the algorithm automatically selects a volume within the neuron until the edges corresponding to the neuronal outline are reached. Internally the algorithm optimizes a 3D active contour segmentation model formulated as a cost function taking the SEM image edges into account. This reduced the reconstruction time, while staying close to the manual reference segmentation result. COMPARISON WITH EXISTING METHODS: Our algorithm is easy to use for a fast segmentation process, unlike previous methods it does not require image training nor an extended computing capacity. CONCLUSION: Our semi-automatic segmentation algorithm led to a dramatic reduction in processing time for the 3D-reconstruction of identified neurons.

An Esterase from Anaerobic Clostridium hathewayi Can Hydrolyze Aliphatic-Aromatic Polyesters.

Recently, a variety of biodegradable polymers have been developed as alternatives to recalcitrant materials. Although many studies on polyester biodegradability have focused on aerobic environments, there is much less known on biodegradation of polyesters in natural and artificial anaerobic habitats. Consequently, the potential of anaerobic biogas sludge to hydrolyze the synthetic compostable polyester PBAT (poly(butylene adipate-co-butylene terephthalate) was evaluated in this study. On the basis of reverse-phase high-performance liquid chromatography (RP-HPLC) analysis, accumulation of terephthalic acid (Ta) was observed in all anaerobic batches within the first 14 days. Thereafter, a decline of Ta was observed, which occurred presumably due to consumption by the microbial population. The esterase Chath_Est1 from the anaerobic risk 1 strain Clostridium hathewayi DSM-13479 was found to hydrolyze PBAT. Detailed characterization of this esterase including elucidation of the crystal structure was performed. The crystal structure indicates that Chath_Est1 belongs to the α/ß-hydrolases family. This study gives a clear hint that also micro-organisms in anaerobic habitats can degrade manmade PBAT.

The 3D pore structure and fluid dynamics simulation of macroporous monoliths: High permeability due to alternating channel width.

Polymethacrylate-based monoliths have excellent flow properties. Flow in the wide channel interconnected with narrow channels is theoretically assumed to account for favorable permeability. Monoliths were cut into 898 slices in 50nm distances and visualized by serial block face scanning electron microscopy (SBEM). A 3D structure was reconstructed and used for the calculation of flow profiles within the monolith and for calculation of pressure drop and permeability by computational fluid dynamics (CFD). The calculated and measured permeabilities showed good agreement. Small channels clearly flowed into wide and wide into small channels in a repetitive manner which supported the hypothesis describing the favorable flow properties of these materials. This alternating property is also reflected in the streamline velocity which fluctuated. These findings were corroborated by artificial monoliths which were composed of regular (interconnected) cells where narrow cells followed wide cells. In the real monolith and the artificial monoliths with interconnected flow channels similar velocity fluctuations could be observed. A two phase flow simulation showed a lateral velocity component, which may contribute to the transport of molecules to the monolith wall. Our study showed that the interconnection of small and wide pores is responsible for the excellent pressure flow properties. This study is also a guide for further design of continuous porous materials to achieve good flow properties.

Assessing structural correlations and heterogeneity length scales in functional porous polymers from physical reconstructions.

A general, model-free, quantitative approach to the key morphological properties of a porous polymer monolith is presented. After 3D reconstruction, image-based analysis delivers detailed spatial and spatially correlated information on the structural heterogeneities in the void space and the polymer skeleton. Identified heterogeneities, which limit the monolith's performance in targeted applications, are traced back to the preparation process.