Endogenous iron-enriched biochar derived from steel mill wastewater sludge for tetracycline removal: Heavy metals stabilization, adsorption performance and mechanism.

Steel mill wastewater sludge, as an iron-enriched solid waste, was expected to be converted into iron-enriched biochar with acceptable environmental risk by pyrolysis. The purpose of our study was to evaluate the chemical speciation transformation of heavy metals in biochar under various pyrolysis temperatures and its reutilization for tetracycline (TC) removal. The experimental data indicated that pyrolysis temperature was a key factor affecting the heavy metals speciation and bioavailability in biochar, and biochar with pyrolysis temperature at 450 °C was the most feasible for reutilization without potential risk. The endogenous iron-enriched biochar (FSB450) showed highly efficient adsorption towards TC, and its maximum adsorption capacity could reach 240.38 mg g-1, which should be attributed to its excellent mesoporous structure, abundant functional groups and endogenous iron cycling. The endogenous iron was converted to a stable iron oxide crystalline phase (Fe3O4 and MgFe2O4) by pyrolysis, which underwent a valence transition to form a coordination complex with TC by electron shuttling in the FSB450 matrix. The study provides a win-win approach for resource utilization of steel wastewater sludge and treatment of antibiotic contamination in wastewater.

Effect of pyrolytic temperatures on the 2,4-dichlorophenol adsorption performance of biochar derived from Populus nigra.

To investigate the correlation between the physicochemical properties of biochar and its adsorption performance for 2,4-dichlorophenol (2,4-DCP), Populus nigra was subjected to oxygen-limited pyrolysis at temperatures ranging from 300 to 600 ℃. The experimental results showed that as the pyrolysis temperature increased, the specific surface area and degree of graphitization of the resultant biochar increased, but the amount of oxygen-containing functional groups decreased. Populus nigra biochar produced at 450 ℃ exhibits the best adsorption performance for 2,4-DCP due to its excellent physicochemical properties and greater electron exchange capability. The removal of 2,4-DCP is a multi-step adsorption process dominated by chemisorption, which involved oxygen-containing functional groups-mediated hydrogen bonding, as well as π-π electron donor-acceptor (EDA) interaction between the aromatic rings and Cl atoms. The study highlights the potential of Populus nigra residues for producing biochar as an affordable and effective adsorbent for 2,4-DCP removal.

Evaluation of fibrinogen concentration by clot firmness using a dielectric blood coagulation test system.

PURPOSE: To determine if fibrinogen concentration can be evaluated by dielectric permittivity changes in dielectric blood coagulation testing (DBCM) during cardiovascular surgery with cardiopulmonary bypass (CPB). METHODS: We performed a single-center prospective observational study at a university hospital. One hundred patients undergoing cardiovascular surgery with CPB were enrolled. Whole-blood samples were obtained after weaning from CPB, and dielectric clot strength (DCS) was measured by intrinsic pathway testing with or without heparinase in DBCM. The FIBTEM test was performed during rotational thromboelastometry using the same samples, and maximum clot firmness (MCF) was evaluated. Spearman's correlation analysis was performed, and receiver operating characteristics (ROC) curve analyses were used to evaluate the performance of hypofibrinogenemia detection. RESULTS: DCS showed a strong positive correlation with plasma fibrinogen concentration (Rs = 0.76, P < 0.0001). The area under the ROC curve for evaluating plasma fibrinogen concentration < 200 mg/dL was 0.91 (95% confidence interval (CI) 0.85-0.97) for DCS, compared with 0.88 (95% CI 0.81-0.94) for FIBTEM MCF. The optimal cutoff value of DCS was 17.0 (sensitivity 94%, specificity 80%). CONCLUSIONS: DCS variables showed a significantly strong correlation with plasma fibrinogen concentration, and the diagnostic performance for hypofibrinogenemia was comparable to that for FIBTEM MCF. This novel methodology has the potential to provide a point-of-care test with sufficient accuracy for the detection of perioperative hypofibrinogenemia during cardiovascular surgery with CPB.

A meta-analysis of Th1 and Th2 cytokine profiles differentiating tuberculous from malignant pleural effusion.

To clarify the predominance of Th1 or Th2 immune responses in malignant and tuberculous pleural effusion (MPE and TPE, respectively), we performed a meta-analysis of previously published results of the levels of Th1/Th2 cytokines associated with these two types of pleural effusion to evaluate the use of Th1/Th2 cytokine profiles in distinguishing TPE from MPE. We searched the PubMed and EMBASE databases for studies indexed from 2000 to March 2021. We included studies that (a) diagnosed TPE and MPE based on culture or pleural tissue biopsy and that (b) compared levels of Th1/Th2 cytokines between TPE and MPE. Pooled data based on a random-effects model or fixed-effects model and standardized mean differences (SMDs) across studies were used to compare TPE and MPE. We also performed Egger's test to assess publication bias. Of 917 identified studies, a total of 42 studies were selected for the meta-analysis. Compared with MPE subjects, TPE subjects had a significantly higher level of TNF-α [2.22, (1.60-2.84)], an elevated level of IFN-γ [3.30, (2.57-4.40)] in pleural effusion, a situation where the Th1 immune response dominated. Conversely, the levels of interleukin-4 (IL-4) and IL-10 (Th2 cytokines) were higher in the MPE subjects than in the TPE subjects, showing statistically nonsignificant tiny effects [-0.15, (-0.94 to 0.63) and -0.04, (-0.21 to 0.12), respectively]. We confirmed that TPE, a situation in which the Th1 cytokines are predominant. The slight preponderance of Th2 cytokines in MPE, which is not convincing enough to prove.

[Epidemic situation and control strategy of malaria in Yancheng City, Jiangsu Province].

OBJECTIVE: To understand the epidemiological characteristics and epidemic situation of malaria in Yancheng City, so as to provide the evidence for proposing the control strategy of malaria. METHODS: A retrospective investigation was employed. The epidemiological data of the definitely diagnosed malaria cases in Yancheng City from 2003 to 2011 were collected and analyzed for the epidemiological characteristics and epidemic situation of malaria. RESULTS: A total of 134 malaria cases were detected in 9 counties (cities, districts) of Yancheng City from 1993 to 2011, including 18 cases of local vivax malaria, 59 cases of imported vivax malaria, 56 cases of imported falciparum malaria and 1 cases of imported malariae malaria, which comprised 13.43%, 44.03%, 41.79% and 0.75% of the total cases, respectively. From 1993 to 2011, the total incidence of malaria was 0.3 per million to 2.9 per million, and the incidence of local malaria ranged between 0 and 0.6 per million, appearing low epidemic situation. Since 2006, no local malaria cases were detected for 6 successive years. A total of 56 cases of oversea imported falciparum malaria and 1 cases of imported malariae malaria were found from 2007 to 2011, and the number of imported falciparum malaria cases exhibited an increasing tendency year by year. The median interval from onset to treatment for these patients was 1 day, 58.96% of the patients went to clinic when they felt silk and the village clinic was their major choice for the first visit. All of the median intervals from onset to blood test, to diagnosis and to treatment were 4 days. CONCLUSIONS: The transmission of local malaria tends to be gradually eliminated in Yancheng City, and the oversea imported falciparum malaria cases obviously increase. Currently, the surveillance and control of imported malaria should be given a high priority.