RESUMO
Bamboo has great economic values and is used extensively in many industries, and their natural distribution range was divided into 12 zones in China according to the temperature of their geographical distribution in previous works. Different bamboo species had significantly different abilities in low-temperature tolerance, which need to be considered carefully during ex-situ introduction. In this paper, we observed and evaluated the low-temperature damage of 19 bamboo species in winter, and measured the physiological changes of bamboo leaves. A total of 3060 leaf samples were obtained from 102 core collections in 34 bamboo species from the 5 regions of Chinese mainland for anatomical comparison, in order to screen out the key anatomical indicators related to their low-temperature tolerance and to establish a mathematical prediction model for bamboo introduction. The results showed that the low-temperature resistance of clustered bamboos was generally lower than that of the scattered bamboos. The decreased temperature led to the constant decrease of net photosynthetic rate and transpiration rate, but the increase of soluble sugar content in all bamboo species. There was no dormancy for all bamboo species in winter. The temperate bamboos showed lower photosynthesis as compared to tropical bamboos in winter. The leaf shape of bamboos was closely related to their distribution. A total of 13 leaf indicators were screened and more suitable to estimate the low-temperature tolerant abilities of bamboos and to predict their distribution. The MNLR (multiple nonlinear regression) mathematical model showed the highest fitting degree and the optimal prediction ability in the potential northernmost introduction range of bamboos. This study lay a foundation for bamboo introduction, and could also reduce the economic losses caused by the wrong introduction.
RESUMO
To meet aero-engine aluminum skirt requirements, an experiment was carried out using Al-Nb-B2O3-CuO as the reaction system and a 6063 aluminum alloy melt as the reaction medium for a contact reaction, and 6063 aluminum matrix composites containing in situ particles were prepared with the near-liquid-phase line-casting method after the reaction was completed. The effects of the reactant molar ratio and the preheating temperature on the in situ reaction process and products were explored in order to determine the influence of in situ-reaction-product features on the organization and the qualities of the composites. Thermodynamic calculations, DSC analysis, and experiments revealed that the reaction could continue when the molar ratio of the reactants of Al-Nb-B2O3-CuO was 6:1:1:1.5. A kinetic study revealed that the Al thermal reaction in the system produced Al2O3 and [B], and the [B] atoms interacted with Nb to generate NbB2. With increasing temperature, the interaction between the Nb and the AlB2 produced hexagonal NbB2 particles with an average longitudinal size of 1 µm and subspherical Al2O3 particles with an average longitudinal size of 0.2 µm. The microstructure of the composites was reasonably fine, with an estimated equiaxed crystal size of around 22 µm, a tensile strength of 170 MPa, a yield strength of 135 MPa, an elongation of 13.4%, and a fracture energy of 17.05 × 105 KJ/m3, with a content of 2.3 wt% complex-phase particles. When compared to the matrix alloy without addition, the NbB2 and Al2O3 particles produced by the in situ reaction had a significant refinement effect on the microstructure of the alloy, and the plasticity of the composite in the as-cast state was improved while maintaining higher strength and better overall mechanical properties, allowing for industrial mass production.
RESUMO
Axial extrusion-connection technology is one of the important connection technologies for hydraulic piping systems, with high sealing performance and mechanical strength. In this paper, the finite-element-modeling method is used to simulate the experimental process of the connection strength of the axial extrusion joint. The generation mechanism and calculation method of the connection strength are analyzed. To optimize the joint strength, orthogonal testing and grey correlation analysis are used to analyze the influencing factors of joint strength. The key factors affecting joint strength are obtained as the friction coefficient µ1, µ2 between joint components and the groove angle θ1 of the fittings body. The back-propagation (BP) neural-network algorithm is used to establish the connection-strength model of the joint and the genetic algorithm is used to optimize it. The optimal connection strength is 8.237 kN and the optimal combination of influencing factors is 0.2, 0.4 and 76.8°. Compared with the prediction results of the neural-network genetic algorithm, the relative error of the finite-element results is 3.9%, indicating that the method has high accuracy. The results show that the extrusion-based joining process offers significant advantages in the manufacture of high-strength titanium tubular joints.
RESUMO
The purpose of this study was to investigate the purification effect of a new adsorption material containing bioreactor and the critical role of viable but non-culturable (VBNC) bacteria in a eutrophication ecosystem. Major water quality parameters of the prepared eutrophic water were determined, and the microbial community was analyzed during 2 years. The results showed that removal rates of total phosphorus (TP), total nitrogen (TN), chlorophyll-a (Chl-a), and chemical oxygen demand (COD) were 90.7-95.9%, 84.5-92.4%, 87.9-95.8%, and 68.3-82.7%, respectively, indicating the high efficiency of the bioreactor in the eutrophic water treatment. Although the bioreactor had been operated for 2 years, water from the treatment group was much clearer and odorless than from the control group, exhibiting the long service life of the bioreactor. Stopping operation in August caused significant decrease of the removal rates of major water quality parameters (p < 0.05). This operational stop event and high temperature in summer exerted a dual effect on the bioreactor, whereas the impact could be minimized when the bioreactor was running. Moreover, the total bacteria under +Rpf (active resuscitation-promoting factor) treatment were higher than under -Rpf (inactive resuscitation-promoting factor) treatment, implying that Rpf could resuscitate VBNC bacteria in the eutrophication ecosystem. Nine strains of VBNC bacteria were isolated based on the BLAST results of the 16S rRNA gene. Also, these bacteria might contribute to the eutrophic water treatment based on their functions of phosphorus collecting and denitrification. These results provided new insights for engineering technology innovations, and consequently these findings had benefits in eutrophic water treatment.
Assuntos
Microbiota , Purificação da Água , Adsorção , Reatores Biológicos , Eutrofização , Nitrogênio/análise , Fósforo , RNA Ribossômico 16S , SoloRESUMO
A Gram-stain-negative, aerobic, rod-shaped bacterial strain, designated ZYSR67-ZT, was isolated from a pharmaceutical wastewater sample collected from a chemical factory in Zhejiang, China. The strain was motile by a single polar flagellum and grew at 4-42 °C (optimum, 35 °C), pH 5.0-9.0 (optimum, 6.0) and 0-5.0% (w/v) NaCl (optimum, 2.0%). Based on multilocus sequence analysis using 16S rRNA, gyrB, rpoB and rpoD, the strain ZYSR67-ZT formed a distinct phylogenetic group in the genus Pseudomonas. The average nucleotide identity values between strain ZYSR67-ZT and the closely related 10 type strains of the Pseudomonas species were 75.8-78.6%. The in silico DNA-DNA hybridization values indicated that strain ZYSR67-ZT and the type strains of the Pseudomonas shared 21.4-23.1% DNA relatedness. The predominant isoprenoid quinone system was ubiquinone-9 while ubiquinone-8 was present in trace amounts. The major fatty acids (> 10%) identified were C12:0, C16:0, C18:1 ω7c and summed features 3 (C16:1 ω7c and/or iso-C15:0 2OH). The major polar lipids consisted of phosphatidylethanolamine, phosphatidylglycerol and diphosphatidylglycerol. The genomic DNA G+C content was 62.6 mol%. On the basis of morphological, physiological and chemotaxonomic characteristics, together with the results of phylogenetic analysis, strain ZYSR67-ZT was proposed to represent a novel species of the genus Pseudomonas, named Pseudomonas pharmafabricae sp. nov.. The type strain is ZYSR67-ZT (= CGMCC 1.15498T = JCM 31306T).
Assuntos
Preparações Farmacêuticas , Filogenia , Pseudomonas/classificação , Águas Residuárias/microbiologia , Composição de Bases , China , DNA Bacteriano/genética , Ácidos Graxos/análise , Genes Bacterianos/genética , Genoma Bacteriano/genética , Genótipo , Fenótipo , Fosfolipídeos/análise , Pseudomonas/genética , Pseudomonas/fisiologia , RNA Ribossômico 16S/genética , UbiquinonaRESUMO
A gram-stain-negative, aerobic, ovoid or short rod-shaped, and non-motile strain, designed G7T was isolated from a tidal flat sample collected from the coast of East Sea in Zhoushan, China. Strain G7T grew at 4-40 °C and pH 6.0-9.0 (optimum, 28 °C and pH 7.5) and with 0-7% (w/v) NaCl (optimum, 1%). The predominant respiratory quinone was Q-10 and the major fatty acids (>10%) identified were C18:1 ω7c, C16:0 and summed feature 3 (C16:1 ω7c and/or C16:1 ω6c). The polar lipids of strain G7T consisted of phosphatidylglycerol, phosphatidylethanolamine, phosphatidylcholine, and four unidentified lipids. The genomic DNA G+C content was 56.7 mol%. Phylogenetic analysis based on 16S rRNA gene sequences showed that strain G7T formed a distinct lineage belonging to the Roseobacter clade of the family Rhodobacteraceae. On the basis of morphological, physiological, and chemotaxonomic characteristics, together with the results of phylogenetic analysis, strain G7T is described as a novel species in a new genus, for which the name Aestuarium zhoushanense gen. nov., sp. nov. (type strain G7T = MCCC 1K03229T = KCTC 52584T) is proposed.