A novel flexible nerve guidance conduit promotes nerve regeneration while providing excellent mechanical properties.

JOURNAL/nrgr/04.03/01300535-202507000-00029/figure1/v/2024-09-09T124005Z/r/image-tiff Autografting is the gold standard for surgical repair of nerve defects > 5 mm in length; however, autografting is associated with potential complications at the nerve donor site. As an alternative, nerve guidance conduits may be used. The ideal conduit should be flexible, resistant to kinks and lumen collapse, and provide physical cues to guide nerve regeneration. We designed a novel flexible conduit using electrospinning technology to create fibers on the innermost surface of the nerve guidance conduit and employed melt spinning to align them. Subsequently, we prepared disordered electrospun fibers outside the aligned fibers and helical melt-spun fibers on the outer wall of the electrospun fiber lumen. The presence of aligned fibers on the inner surface can promote the extension of nerve cells along the fibers. The helical melt-spun fibers on the outer surface can enhance resistance to kinking and compression and provide stability. Our novel conduit promoted nerve regeneration and functional recovery in a rat sciatic nerve defect model, suggesting that it has potential for clinical use in human nerve injuries.

Versatile Design of NO-Generating Proteolipid Nanovesicles for Alleviating Vascular Injury.

Vascular injury is central to the pathogenesis and progression of cardiovascular diseases, however, fostering alternative strategies to alleviate vascular injury remains a persisting challenge. Given the central role of cell-derived nitric oxide (NO) in modulating the endogenous repair of vascular injury, NO-generating proteolipid nanovesicles (PLV-NO) are designed that recapitulate the cell-mimicking functions for vascular repair and replacement. Specifically, the proteolipid nanovesicles (PLV) are versatilely fabricated using membrane proteins derived from different types of cells, followed by the incorporation of NO-generating nanozymes capable of catalyzing endogenous donors to produce NO. Taking two vascular injury models, two types of PLV-NO are tailored to meet the individual requirements of targeted diseases using platelet membrane proteins and endothelial membrane proteins, respectively. The platelet-based PLV-NO (pPLV-NO) demonstrates its efficacy in targeted repair of a vascular endothelium injury model through systemic delivery. On the other hand, the endothelial cell (EC)-based PLV-NO (ePLV-NO) exhibits suppression of thrombosis when modified onto a locally transplanted small-diameter vascular graft (SDVG). The versatile design of PLV-NO may enable a promising therapeutic option for various vascular injury-evoked cardiovascular diseases.

Surface Functionalization of Electrospun Scaffolds by QK-AG73 Peptide for Enhanced Interaction with Vascular Endothelial Cells.

Rapid endothelialization still remains challenging for blood-contacting biomaterials, especially for long-term, functional, small-diameter vascular grafts. The vascular endothelial growth factor (VEGF)-mimicking QK peptide holds great promise in promoting vascular endothelial cellular activities such as adhesion, spreading, proliferation, and migration. Syndecans are transmembrane proteoglycans that are highly expressed on cell surfaces, including vascular endothelial cells, which can act as docking receptors to provide binding sites for a variety of cellular growth and signaling molecules. Herein, a novel peptide QK-AG73 that coupled the QK domain with the syndecan binding peptide AG73 was proposed, aiming to synergistically enhance the interaction with vascular endothelial cells. In addition, mechanically matched bioactive scaffolds based on poly(l-lactide-co-ε-caprolactone) were successfully prepared by surface functionalization of the covalently combined QK-AG73 peptide. The result showed that the adhesion of human umbilical vein endothelial cells (HUVECs) was increased by approximately 2-fold on QK-AG73-modified surface compared with those modified with a single QK or AG73 peptide. Moreover, surface functionalization of electrospun scaffolds by this QK-AG73 peptide was more efficient in specifically promoting the proliferation of HUVECs and allowing them to grow with an elongated cobblestone-like cell morphology. It was hypothesized that both VEGF receptors and transmembrane syndecan receptors were involved in cellular regulation by the QK-AG73 peptide, which resulted in synergistic improvement of the interactions with vascular endothelial cells and provided a promising strategy to promote endothelialization of small-diameter vascular grafts.

Decellularized Scaffolds with Double-Layer Aligned Microchannels Induce the Oriented Growth of Bladder Smooth Muscle Cells: Toward Urethral and Ureteral Reconstruction.

There is a great clinical need for regenerating urinary tissue. Native urethras and ureters have bidirectional aligned smooth muscle cells (SMCs) layers, which plays a pivotal role in micturition and transporting urine and inhibiting reflux. Thus far, urinary scaffolds have not been designed to induce the native-mimicking aligned arrangement of SMCs. In this study, a tubular decellularized extracellular matrix (dECM) with an intact internal layer and bidirectional aligned microchannels in the tubular wall, which is realized by the subcutaneous implantation of a template, followed by the removal of the template, and decellularization, is engineered. The dense and intact internal layer effectively increases the leakage pressure of the tubular dECM scaffolds. Rat-derived dECM scaffolds with three different sizes of microchannels are fabricated by tailoring the fiber diameter of the templates. The rat-derived dECM scaffolds exhibiting microchannels of ≈65 µm show suitable mechanical properties, good ability to induce the bidirectional alignment and growth of human bladder SMCs, and elevated higher functional protein expression in vitro. These data indicate that rat-derived tubular dECM scaffolds manifesting double-layer aligned microchannels may be promising candidates to induce the native-mimicking regeneration of SMCs in urethra and ureter reconstruction.

The loading of C-type natriuretic peptides improved hemocompatibility and vascular regeneration of electrospun poly(ε-caprolactone) grafts.

As a result of thrombosis or intimal hyperplasia, synthetic artificial vascular grafts had a low success rate when they were used to replace small-diameter arteries (inner diameter < 6 mm). C-type natriuretic peptides (CNP) have anti-thrombotic effects, and can promote endothelial cell (EC) proliferation and inhibit vascular smooth muscle cell (SMC) over-growth. In this study, poly(ε-caprolactone) (PCL) vascular grafts loaded with CNP (PCL-CNP) were constructed by electrospinning. The PCL-CNP grafts were able to continuously release CNP at least 25 days in vitro. The results of scanning electron microscopy (SEM) and mechanical testing showed that the loading of CNP did not change the microstructure and mechanical properties of the PCL grafts. In vitro blood compatibility analysis displayed that PCL-CNP grafts could inhibit thrombin activity and reduce platelet adhesion and activation. In vitro cell experiments demonstrated that PCL-CNP grafts activated ERK1/2 and Akt signaling in human umbilical vein endothelial cells (HUVECs), as well as increased cyclin D1 expression, enhanced proliferation and migration, and increased vascular endothelial growth factor (VEGF) secretion and nitric oxide (NO) production. The rabbit arteriovenous (AV)-shunt ex vitro indicated that CNP loading significantly improved the antithrombogenicity of PCL grafts. The assessment of vascular grafts in rat abdominal aorta implantation model displayed that PCL-CNP grafts promoted the regeneration of ECs and contractile SMCs, modulated macrophage polarization toward M2 phenotype, and enhanced extracellular matrix remodeling. These findings confirmed for the first time that loading CNP is an effective approach to improve the hemocompatibility and vascular regeneration of synthetic vascular grafts. STATEMENT OF SIGNIFICANCE: Small-diameter (< 6 mm) vascular grafts (SDVGs) have not been made clinically available due to their prevalence of thrombosis, limited endothelial regeneration and intimal hyperplasia. The incorporation of bioactive molecules into SDVGs serves as an effective solution to improve hemocompatibility and endothelialization. In this study, for the first time, we loaded C-type natriuretic peptides (CNP) into PCL grafts by electrospunning and confirmed the effectiveness of loading CNP on improving the hemocompatibility and vascular regeneration of artificial vascular grafts. Regenerative advantages included enhancement of endothelialization, modulation of macrophage polarization toward M2 phenotypes, and improved contractile smooth muscle cell regeneration. Our investigation brings attention to CNP as a valuable bioactive molecule for modifying cardiovascular biomaterial.

Design, synthesis and biological evaluations of novel pyridone-thiazole hybrid molecules as antitumor agents.

A hybrid pharmacophore approach was adopted to design and synthesize new series of pyridone-thiazole hybrid compounds. The structures of the compounds were established by IR, 1H NMR, 13C NMR, and HRMS. All the newly prepared compounds (3a-3m) were in vitro evaluated for their antiproliferative activity against three human cancer cell lines, namely Colon cancer (HCT-116), gastric carcinoma (MGC803) and hepatocellular cancer (Huh7). Bioassay results demonstrated that most of the tested compounds showed potent anti-tumor activities against various cancer cells in vitro, and some compounds exhibited stronger effects than positive control 5-Fluorouracil (5-FU). Compound 3b showed the best anti-tumor activity with IC50 values of 8.17 µM and 3.15 µM against HCT116 and MGC803 cell lines, respectively, which was 1.4-8.1 times more potent than 5-Fluorouracil (IC50 = 11.29 µM and 25.54 µM against HCT116 and MGC803 respectively). These findings suggest that compound 3b may have potential to be developed as a promising lead for the design of novel anticancer small-molecule drugs.

Synthesis and biological evaluation of novel hydroxybenzaldehyde-based kojic acid analogues as inhibitors of mushroom tyrosinase.

Two series of novel kojic acid analogues (4a-j) and (5a-d) were designed and synthesized, and their mushroom tyrosinase inhibitory activities was evaluated. The result indicated that all the synthesized derivatives exhibited excellent tyrosinase inhibitory properties having IC50 values in the range of 1.35±2.15-17.50±2.75µM, whereas standard inhibitor kojic acid have IC50 values 20.00±1.08µM. Specifically, 5-phenyl-3-[5-hydroxy-4-pyrone-2-yl-methylmercap-to]-4-(2,4-dihydroxyl-benzylamino)-1,2,4-triazole (4f) exhibited the most potent tyrosinase inhibitory activity with IC50 value of 1.35±2.15µM. The kinetic studies of the compound (4f) demonstrated that the inhibitory effects of the compound on the tyrosinase were belonging to competitive inhibitors. Meanwhile, the structure-activity relationship was discussed.

Synthesis and biological evaluation of kojic acid derivatives containing 1,2,4-triazole as potent tyrosinase inhibitors.

A series of 5-substituted-3-[5-hydroxy-4-pyrone-2-yl-methymercapto]-4-amino-1,2,4-triazole derivatives were synthesized by nucleophilic substitution reaction of 5-hydroxy-2-chloromethyl -4H-pyran-4-one with 5-substituted-3-mercapto-4-amino-1,2,4-triazole, and their inhibitory effects on mushroom tyrosinase were evaluated. The results indicated that most of the synthesized compounds exhibited significant inhibitory activity. Specifically, 5-(4-chlorophenyl)-3-[5-hydroxy-4-pyrone-2-yl-methymercapto]-4-amino-1,2,4-triazole (6j) exhibited the most potent tyrosinase inhibitory activity with IC50 value of 4.50 ± 0.34 µm. The kinetic studies of the compound (6j) demonstrated that the inhibitory effects of the compound on the tyrosinase were belonging to competitive inhibitors. Meanwhile, the structure-activity relationship was also discussed.