RESUMO
Azobenzene (Azo) liquid-crystalline polymers are intriguing due to their unique photo-induced isomerization and supramolecular chirality. However, clarification on multicomponent chiral induction towards Azo polymers remains ambiguous and challenging. Herein, chiral solvents and amines were employed to control the chiroptical activity of achiral Azo polymers. Methyl L-/D-lactate was added as the poor solvent and chiral inducer to achieve the first chiral induction in Azo aggregates. Chiral amines were utilized for the second chiral induction based on the acid-base interactions between the carboxyl groups of polymers and amines. The chiral enhancement and inversion of Azo units could be observed through the synergistic or antagonistic effect between solvents and amines. The impacts of solvent, chemical structures, feed ratio, enantiomeric excess, and temperature on supramolecular chirality were systematically studied. Furthermore, this system displayed the chiroptical switching property and chiral recovery under reversible irradiation.
RESUMO
Chiral plasmonic nanostructures exhibit potential in the advanced manufacturing industry, due to their fascinating characteristics. However, the limitation of existing fabrication methods as difficulty to precisely manipulate chiral nanostructures at the nanoscale restricts their application and optimization of performance. In this work, we report a simple and robust route for the precise construction of chiral Au nanoparticles (NPs), employing star-like block copolymers with well-defined structures as chiral templates. The globular unimolecular micelles as nanoreactors enabled control over the size, shape, and chirality of in situ grown nanocrystals. Utilizing the chiral anisotropy property of surface-enhanced Raman scattering (SERS), the enantioselective discrimination on various substrates was accomplished with an enhancement factor over 9.3 × 106. NPs with a smaller size exhibited strengthened Raman enhancement and chiral recognition. Furthermore, these chiral unimolecular-micelle-based templates with high efficiency and strong controllability could pave the way for tailor-made chiral nanomaterials.
RESUMO
Compared with normal stimulus such as light and heat, ultrasonic possesses much deeper penetration into tissues and organs and has lower scattering in heterogeneous systems as a noninvasive stimulus. Reversible addition-fragmentation chain-transfer polymerization (RAFT) in aqueous media is performed in a commercial ultrasonic wash bath with 40 kHz frequency ultrasonic, in the presence of piezoelectric tetragonal BaTiO3 (BTO) nanoparticles. Owing to the electron transfer from BTO under the ultrasonic action, the water can be decomposed to produce hydroxyl radical (HOâ¢) and initiate the RAFT polymerization (piezo-RAFT). The piezo-RAFT polymerization exhibits features of controllable and livingness, such as linear increase of molar mass and narrow molar mass distributions (Mw/Mn < 1.20). Excellent temporal control of the polymerization and the chain fidelity of polymers are illustrated by "ON and OFF" experiment and chain extension, separately. Moreover, this ultrasonic-driven piezoelectric-induced RAFT polymerization in aqueous media can be directly used for the preparation of piezoelectric hydrogel which have potential application for stress sensor.
RESUMO
Ultrasmall fluorescent nanomaterials have been widely studied as novel fluorescent probes; however, these nanomaterials are prone to structural damage or aggregation, and the sensitivity and accuracy of most single emission fluorescence probes were very low. Therefore, the controlled synthesis of stable dual-emission ratiometric fluorescence ultrasmall assembly probes still remains a challenge. Herein, star-like polymer unimolecular micelles were utilized as a scaffold template to encapsulate fluorescent ultrasmall carbon quantum dots (CQDs) and gold nanoclusters (AuNCs) via the polymer template directed self-assembly strategy to obtain multiple-responsive ratiometric fluorescent assemblies. The assemblies were ultrastable, well-defined, and nearly monodispersed with controlled size, regular morphology, and pH- and thermal-responsiveness. The assemblies can be applied to realize rapid, sensitive, quantitative, and specific detection of Cu2+ and GSH. Moreover, the convenient rapid real-time detection was realized via the combination of the visualized paper-based sensor, and the multilevel information encryption was also achieved.
RESUMO
Traditional transparent polymer nanocomposites combined with functional fluorescent inorganic nanofillers are promising for many advanced optical applications. However, the aggregation of the incorporated functional nanoparticles results in light scattering and will decrease the transparency of nanocomposites, which will restrain the application of the transparent nanocomposites. Herein, a robust synthesis strategy was proposed to modify upconversion nanoparticles (UCNPs) with polymethyl methacrylate (PMMA) to form UCNP@PMMA core@shell nanocomposites though metal-free photoinduced surface-initiated atom transfer radical polymerization (photo-SI-ATRP), and thus, the dispersity of UCNP@PMMA and the interface compatibility between the surface of UCNPs and the bulk PMMA matrix was greatly improved. The obtained PMMA nanocomposites possess high transparency and show strong upconversion photoluminescence properties, which promises great opportunities for application in 3D display and related optoelectronic fields. This strategy could also be applied to fabricate other kinds of functional transparent polymer nanocomposites with inorganic nanoparticles uniformly dispersed.
RESUMO
Anisotropic thermally conductive composites are very critical for precise thermal management of electronic devices. In this work, in order to prepare a composite with significant anisotropic thermal conductivity, polyamide 12/styrene-acrylic copolymer-boron nitride (PA12/SA-BN) composites with macro and micro double anisotropic structures were fabricated successfully using 3D printing and micro-shear methods. The morphologies and thermally conductive properties of composites were systematically characterized via SEM, XRD, and the laser flash method. Experimental results indicate that the through-plane thermal conductivity of the composite is 4.2 W/(m·K) with only 21.4 wt% BN, which is five times higher than that of the composite with randomly oriented BN. Simulation results show that the macro-anisotropic structure of the composite (caused by the selective distribution of BN) as well as the micro-anisotropic structure (caused by the orientation structure of BN) both play critical roles in spreading heat along the specified direction. Therefore, as-obtained composites with double anisotropic structures possess great potential for the application inefficient and controllable thermal management in various fields.
RESUMO
Highly ordered TiO2 nanotube arrays (TNTAs) and their heterostructure nanocomposites by structural engineering design were utilized as heterogeneous photocatalysts for highly efficient broadband photoinduced controlled radical polymerization (photoCRP), including photoATRP and PET-RAFT. Highly efficient broadband UV-visible light responsive photoCRP was achieved by combining the acceleration effects of electron transfer derived from the distinctive highly ordered nanotube structure of TNTAs and the localized surface plasmon resonance (LSPR) effect combined with the formation of the Schottky barrier via modification of Au nanoparticles. This polymerization system was capable to polymerize acrylate and methacrylate monomers with high conversion, "living" chain-ends, tightly regulated molecular weights, and outstanding temporal control properties. The heterogeneous nature of the photocatalysts enabled simple separation and effective reusability in subsequent polymerizations. These results highlight the modular design of highly efficient catalysts to optimize the controlled radical polymerization process.
RESUMO
Successive structural transformations were observed in a methanolic solution containing 4-iodo-1-methylpyridin-1-ium iodide (IPyMe·I) and bismuth iodide (BiI3). When kept in the solution, the amorphous solid (P_1) obtained immediately on mixing would transform to needle crystals (C_1) in hours, which would convert to prismatic crystals (C_2) in around 2 days. In the presence of hydroiodic acid, the hydrothermal reaction of IPyMe·I and BiI3 also gave rise to C_2, and crystals of C_2 in this solution would transform to a third crystalline product C_3 in ca. 3 days. X-ray single crystal diffraction experiments show C_1 containing one-dimensional {BiI4-}n chains, C_2 as a binuclear Bi2I93- structure, and C_3 consisting of a monomeric BiI63- unit, all with IPyMe+ as counter cations. Halogen bonds exist between IPyMe+ and the iodobismuthate, which may play key roles in the structural transformation. By introducing halogen bonding, the hybrids demonstrate excellent water-resistance. A thermal-induced reversible colour change from yellow to dark red occurred from 100 K to 450 K for all three hybrids, in which lattice expansion over the temperature range may be a reason for the thermochromism. The bandgaps derived from the UV-vis diffusion reflectance for the three complexes were 1.80 eV for C_1, 1.84 eV for C_2 and 2.00 eV for C_3. DTF computations followed by electron density topological analysis were applied to explain the structure-optical property relationship for complexes of diverse iodobismuthate types but the same counter cation. It was found that the nature of the Bi-I bonds rather than the dimensionality of the inorganic iodobismuthates is mainly responsible for the light absorption of the materials.
RESUMO
Silver nanomaterials have attracted a great deal of interest due to their broad-spectrum antimicrobial activity. However, it is still challenging to balance the high antibacterial efficiency with low damage to biological cells of silver nanostructures, especially when the diameter decreases to less than 10 nm. Here, we developed a new type of Ag nanohybrid material via a unimolecular micelle template method, which presents amazing antibacterial activities and almost noncytotoxicity. First, water-soluble multiarm star-shaped brushlike copolymer α-CD-g-[(PEO40-g-PAA50)-b-PEO5]18 was precisely synthesized and its micelle behavior in different solvents was revealed. Then, nanocrystal clusters assembled by Ag grains (Ag@Template NCs) were prepared through an in situ redox route using the unimolecular micelle of α-CD-g-[(PEO40-g-PAA50)-b-PEO5]18 as the soft template, AgNO3 as a precursor, and tetrabutylammonium borohydride (TBAB) as the reducing agent. The overall size of the achieved Ag@Template NCs is controlled by the template structure at around 40 nm (Dh in DMF), and the size of the Ag grain can be easily regulated from â¼1 to â¼5 nm by adjusting the feeding ratio of AgNO3/acrylic acid (AA) units in the template from 1:10 to 1:1. Benefitting from the structural design of the template, all Ag@Template NCs prepared here exhibit excellent dispersibility and chemical stability in different aqueous environments (neutral, pH = 5.5, and 0.9% NaCl physiological saline solution), which play a crucial role in the long-term storage and potential application in a complex physiological environment. The antibacterial and cytotoxicity tests indicate that Ag@Template NCs display much better performance than Ag nanoparticles (Ag NPs), which have a comparable overall size of â¼25 nm. The inhibitory capability of Ag@Template NCs to bacteria strongly depends on the grain size. Specifically, the Ag@Template-1 NC assembled by the smallest grains (1.6 ± 0.3 nm) presents the best antibacterial activity. For E. coli (-), the MIC value is as low as 5 µg/mL (0.36 µg/mL of Ag), while for S. aureus (+), the value is around 10 µg/mL (0.72 µg/mL of Ag). The survival rate of L02 cells and lactate dehydrogenase assay together illustrate the low cytotoxicity possessed by the prepared Ag@Template NCs. Therefore, the proposed Ag@Template NC structure successfully resolves the high reactivity, instability, and fast oxidation issues of the ultrasmall Ag nanoparticles, and integrates high antibacterial efficiency and nontoxicity to biological cells into one platform, which implies its broad potential application in biomedicine.
Assuntos
Antibacterianos/efeitos adversos , Antibacterianos/química , Nanopartículas Metálicas/química , Prata/química , Antibacterianos/metabolismo , Boroidretos/química , Sobrevivência Celular/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Humanos , Testes de Sensibilidade Microbiana , Tamanho da Partícula , Polímeros/química , Compostos de Amônio Quaternário/química , Staphylococcus aureus/efeitos dos fármacos , Propriedades de Superfície , Nanomedicina TeranósticaRESUMO
Based on the DFT-level-calculated molecular volume (Vmol ) of pyrrole and its liquid density, pyrrole manifests the highest liquid density coefficient LDc (defined as [Vmol ×density ×0.6023]/FW) value of 0.7. Normal liquids have LDc <0.63. This very high LDc is due to the strong N-Hâ â â π interactions in solution, and hence pyrrole can be considered to be a pseudo-crystalline liquid. When trapped inside the confined space of a crystalline sponge, a reorientation of the N-Hâ â â π interaction is observed leading to specific cyclic N-Hâ â â π tetramers and N-Hâ â â π dimers, as verified by single-crystal X-ray crystallographic and computational methods. These tetramers are of the same size as four pyrrole molecules in the solid-state of pyrrole, yet the cyclic N-Hâ â â π intermolecular interactions are circularly oriented instead of being in the linear zigzag structure found in the X-ray structure of a solid pyrrole. The confinement thus acts as an external driving force for tetramer formation.