Ligand engineering towards electrocatalytic urea synthesis on a molecular catalyst.

Electrocatalytic C-N coupling from carbon dioxide and nitrate provides a sustainable alternative to the conventional energy-intensive urea synthetic protocol, enabling wastes upgrading and value-added products synthesis. The design of efficient and stable electrocatalysts is vital to promote the development of electrocatalytic urea synthesis. In this work, copper phthalocyanine (CuPc) is adopted as a modeling catalyst toward urea synthesis owing to its accurate and adjustable active configurations. Combining experimental and theoretical studies, it can be observed that the intramolecular Cu-N coordination can be strengthened with optimization in electronic structure by amino substitution (CuPc-Amino) and the electrochemically induced demetallation is efficiently suppressed, serving as the origination of its excellent activity and stability. Compared to that of CuPc (the maximum urea yield rate of 39.9 ± 1.9 mmol h-1 g-1 with 67.4% of decay in 10 test cycles), a high rate of 103.1 ± 5.3 mmol h-1 g-1 and remarkable catalytic durability have been achieved on CuPc-Amino. Isotope-labelling operando electrochemical spectroscopy measurements are performed to disclose reaction mechanisms and validate the C-N coupling processes. This work proposes a unique scheme for the rational design of molecular electrocatalysts for urea synthesis.

Effects of Feeding Systems on the Growth Performance, Carcass Characteristics, and Meat Quality in Sheep: A Meta-Analysis.

Meat quality is important in the meat-production chain. Conflicting reports of the effects of feeding systems on sheep growth performance and meat quality exist. By way of meta-analysis, we reviewed the literature on the growth and slaughter performance, and meat quality of lambs that grazed solely on pasture, those that grazed on pasture but received a dietary supplement, and those were exclusively fed indoors. The relevant literature comprised 28 papers, from which response variables of interest were obtained. Compared with stall-fed sheep, pasture-grazing led to significantly (p < 0.05) lower average daily gain, slaughter live weight, hot carcass weight, cold carcass weight, and similar dressing percentage, but pasture-grazed sheep fed a supplement had similar (p > 0.05) values for each of these attributes to stall-fed sheep. The quality of the longissimus muscle from lambs that grazed either exclusively on pasture or pasture with a supplement had significantly (p < 0.05) lower lightness and intramuscular fat content, and significantly (p < 0.05) higher yellowness, Warner-Bratzler shear force, and protein content than meat from stall-fed sheep. We conclude that sheep that have fed exclusively on pasture have lower carcass yield and meat edibility, but improved meat quality, and that pasture-fed sheep that received a supplement had comparable carcass attributes, but greater meat color and health quality than stall-fed sheep.

Effect of Replacing Alfalfa Hay with Common Vetch Hay in Sheep Diets on Growth Performance, Rumen Fermentation and Rumen Microbiota.

The aim of this study was to determine whether the inclusion of 40% of common vetch (CV) hay as a feed ingredient in place of alfalfa hay (AH) would improve performance and ruminal fermentation and microbiota in fattening lambs. Twenty lambs were equally divided into two groups: control group (fed 40% AH with 20% rice straw) and CV group (fed 40% CV hay with 20% rice straw). Concerning hay quality, CV hay had greater in vitro digestibility of dry matter and neutral detergent fiber (p < 0.05) than AH. Lambs fed the CV diet had a higher average daily gain (ADG) and efficiency of feed and economy than lambs fed the control group. The NH3-N content and estimated methane produced per unit of ADG of the CV diet group were significantly lower (p < 0.05) than control group. Multiple differential microbial genera were identified, with Prevotella being the most dominant genus and a tendency towards higher (p = 0.095) in lambs offered CV diet. The higher Ruminococcus abundance (p < 0.05) was found in animals of the CV group compared to the control group. In summary, CV can be incorporated into lamb diets as a low-cost forage alternative to AH to improve feed efficiency and animal performance and to reduce methane produced per unit of ADG.

Recent Developments in Nickel-Based Layered Double Hydroxides for Photo(-/)electrocatalytic Water Oxidation.

Layered double hydroxides (LDHs), especially those containing nickel (Ni), are increasingly recognized for their potential in photo(-/)electrocatalytic water oxidation due to the abundant availability of Ni, their corrosion resistance, and their minimal toxicity. This review provides a comprehensive examination of Ni-based LDHs in electrocatalytic (EC), photocatalytic (PC), and photoelectrocatalytic (PEC) water oxidation processes. The review delves into the operational principles, highlighting similarities and distinctions as well as the benefits and limitations associated with each method of water oxidation. It includes a detailed discussion on the synthesis of monolayer, ultrathin, and bulk Ni-based LDHs, focusing on the merits and drawbacks inherent to each synthesis approach. Regarding the EC oxygen evolution reaction (OER), strategies to improve catalytic performance and insights into the structural evolution of Ni-based LDHs during the electrocatalytic process are summarized. Furthermore, the review extensively covers the advancements in Ni-based LDHs for PEC OER, including an analysis of semiconductors paired with Ni-based LDHs to form photoanodes, with a focus on their enhanced activity, stability, and underlying mechanisms facilitated by LDHs. The review concludes by addressing the challenges and prospects in the development of innovative Ni-based LDH catalysts for practical applications. The comprehensive insights provided in this paper will not only stimulate further research but also engage the scientific community, thus driving the field of photo(-/)electrocatalytic water oxidation forward.

Lightweight Dual-Functional Segregated Nanocomposite Foams for Integrated Infrared Stealth and Absorption-Dominant Electromagnetic Interference Shielding.

Lightweight infrared stealth and absorption-dominant electromagnetic interference (EMI) shielding materials are highly desirable in areas of aerospace, weapons, military and wearable electronics. Herein, lightweight and high-efficiency dual-functional segregated nanocomposite foams with microcellular structures are developed for integrated infrared stealth and absorption-dominant EMI shielding via the efficient and scalable supercritical CO2 (SC-CO2) foaming combined with hydrogen bonding assembly and compression molding strategy. The obtained lightweight segregated nanocomposite foams exhibit superior infrared stealth performances benefitting from the synergistic effect of highly effective thermal insulation and low infrared emissivity, and outstanding absorption-dominant EMI shielding performances attributed to the synchronous construction of microcellular structures and segregated structures. Particularly, the segregated nanocomposite foams present a large radiation temperature reduction of 70.2 °C at the object temperature of 100 °C, and a significantly improved EM wave absorptivity/reflectivity (A/R) ratio of 2.15 at an ultralow Ti3C2Tx content of 1.7 vol%. Moreover, the segregated nanocomposite foams exhibit outstanding working reliability and stability upon dynamic compression cycles. The results demonstrate that the lightweight and high-efficiency dual-functional segregated nanocomposite foams have excellent potentials for infrared stealth and absorption-dominant EMI shielding applications in aerospace, weapons, military and wearable electronics.

Circular RNA PRKCI (hsa_circ_0067934): a potential target in the pathogenesis of human malignancies.

Circular RNAs (circRNAs) are a new type of endogenous non-coding RNA formed by a covalent closed loop. CircRNAs are characterized by specificity, universality, conservation, and stability. They are abundant in eukaryotic cells and have biological regulatory roles at various transcriptional and post-transcriptional levels. The upregulation of circPRKCI has been observed in a variety of tumors and is directly related to the clinicopathological characteristics of tumors and prognosis. More importantly, circPRKCI can participate in the tumorigenesis, progression, recurrence, and metastasis of various tumors through many functional mechanisms, including the activation of signaling pathways, such as the phosphatidylinositol-3-kinase (PI3K)/AKT pathway, and sponging of many microRNAs (miRNAs). This review summarizes the progress achieved in understanding the biological functions of circRNA PRKCI in various tumors. The goal is to inform the discovery of more functional mechanisms and new anticancer molecular targets.

Effects of Leukocyte-rich platelet-rich plasma and Leukocyte-poor platelet-rich plasma on cartilage in a rabbit osteoarthritis model.

Osteoarthritis is a prevalent chronic disease. One of its primary pathological processes involves the degeneration of articular cartilage. Platelet-rich plasma (PRP) contains cytokines and growth factors that can stimulate the repair and regeneration of articular cartilage tissues. PRP may also slow the progression of osteoarthritis. The purpose of this experiment is to compare the efficacy of Leukocyte poor (LP) - PRP and Leukocyte rich (LR) - PRP in treating rabbit osteoarthritis and to investigate their mechanisms of action. Analyzing the impact of leukocytes on PRP therapeutic effectiveness will provide a valuable clinical reference for the choice of which PRP is better for the treatment of osteoarthritis. A rabbit osteoarthritis model was established by injecting papain into the knee joint cavity, and LP-PRP and LR-PRP were prepared through different centrifugation methods for injection into the knee joint cavity. Eight weeks after injection, rabbit knee cartilage specimens were observed for gross changes, HE staining, senna O-solid green staining, and immunohistochemistry of type II collagen and were quantitatively compared using Pelletier's score, Mankin's pathology score, and ImageJ image processing software. Injection of papain into the knee joint cavity successfully established a rabbit model of osteoarthritis. All three evaluation indexes differed significantly from those of the blank group (P<0.05). LP-PRP and LR-PRP exhibited therapeutic effects when compared with the model group. The two PRP groups had similar gross tissue appearance and pathology (P>0.05). The LR-PRP group had higher collagen type-II expression (P < 0.05) than the LP-PRP group. Both LP-PRP and LR-PRP proved therapeutic for the rabbit papain osteoarthritis model. The difference in leukocyte content between the two groups did not yield different cartilage morphology or other factors by 8 weeks posttreatment. LR-PRP displayed the ability to release more factors relevant to the metabolism of type II collagen than LP-PRP, enabling the preservation of into cartilage collagen content of type II collagen and delaying osteoarthritis progression.

[Study of centrifuge conditions for preparing rabbit leukocyte-poor platelet-rich plasma by single centrifugation].

Objective: To explore the best centrifuge condition for preparing rabbit leukocyte-poor platelet-rich plasma (LP-PRP) by using single centrifugation method. Methods: Sixteen healthy New Zealand rabbits, aged 3-4 months, were utilized in the investigation. A total of 15 mL anticoagulated blood was extracted from the central ear artery of each rabbit, with a repeat of the blood collection procedure after 1 and 2 months. The obtained blood specimens were individually subjected to centrifugation at a radius of 16.7 cm and speeds of 1 200, 1 300, 1 400, and 1 500 r/min (equivalent to centrifugal forces of 269× g, 315× g, 365× g, and 420× g) for durations of 2, 3, 4, and 5 minutes, resulting in a total of 16 groups. Following centrifugation, collect plasma from each group to a distance of 1.5 mL from the separation plane. The volumes, platelet enrichment coefficient, and platelet recovery rates of LP-PRP in each group, under varying centrifugation conditions, were methodically computed and subsequently compared. Results: The volume of LP-PRP obtained under all centrifugation conditions ranged from 1.8 to 7.6 mL. At a consistent centrifugal speed, an extension of centrifugation time leaded to a significant increase in the volume of LP-PRP, accompanied by a declining trend in the platelet enrichment coefficient of LP-PRP. When centrifuged for 2 minutes, the volume of LP-PRP at speeds of 1 200 and 1 300 r/min was less than 2.0 mL, while the volume of LP-PRP obtained under other conditions was more than 2.0 mL. When centrifuged for 4 and 5 minutes, the volume of LP-PRP obtained at each speed was more than 4 mL. LP-PRP with a platelet enrichment coefficient more than 2.0 could be prepared by centrifuging at 1 200 r/min for each time group and 1 300 r/min for 2 and 3 minutes, and the highest LP-PRP platelet enrichment coefficient could be obtained by centrifugation for 2 minutes at a speed of 1 200 r/min. The platelet recovery rates of LP-PRP obtained by centrifugation at 1 200 r/min for 4 and 5 minutes, as well as centrifugation at 1 400 r/min for 5 minutes, were both greater than 60%. There was no significant difference between the groups when centrifuged at 1 200 r/min for 4 and 5 minutes ( P>0.05). Conclusion: In the process of preparing rabbit LP-PRP using a single centrifugation method, collecting 15 mL of blood and centrifuging at a radius of 16.7 cm and speed of 1 200 r/min for 4 minutes can prepare LP-PRP with a volume exceeding 2.0 mL, platelet enrichment coefficient exceeding 2.0, and platelet recovery rate exceeding 60%. This centrifugal condition can achieve the optimal LP-PRP action parameters in the shortest possible time.

Study on the use of 3D printed guides in the individualized reconstruction of the anterior cruciate ligament.

OBJECTIVE: Evaluation of the accuracy and effectiveness of 3D printed guides to assist femoral tunnel preparation in individualised reconstruction of the anterior cruciate ligament. METHODS: Sixty patients who attended the Affiliated Hospital of Binzhou Medical College for autologous hamstring single bundle reconstruction of the anterior cruciate ligament from October 2018 to October 2020 were selected and randomly divided into two groups, including 31 cases in the 3D printing group (14 males and 17 females, mean age 41.94 ± 10.15 years) and 29 cases in the control group (13 males and 16 females, mean age 37.76 ± 10.34 years). Patients in both groups were assessed for intraoperative femoral tunnel accuracy, the number of intraoperative positioning and the time taken to prepare the femoral tunnel, the length of the anteromedial approach incision, the pre-planned bone tunnel length and intraoperative bone tunnel length in the 3D printed group, IKDC score and Lysholm score preoperatively and at 3, 6 and 12 months postoperatively, the Lachman、pivot-shift test preoperatively and at 6 months postoperatively, gait analysis to assess internal and external rotation in flexion of the knee at 12 months postoperatively and postoperative complications in both groups. RESULTS: There was no statistical difference in functional knee scores and anteromedial approach incision length between the 3D printed and control groups (p > 0.05), while there was a statistical difference in the accuracy of tunnel positioning, the time taken to prepare the femoral bone tunnel and the degree of external rotation of the knee in flexion between the two groups (p < 0.05). There was no statistical difference between the preoperative planning of the bone tunnel length and the intraoperative bone tunnel length (p > 0.05). COMPLICATIONS: One case in the 3D printing group developed intermuscular vein thrombosis in the affected lower limb after surgery, which disappeared after treatment, while three cases in the control group developed intermuscular vein thrombosis in the affected lower limb. No complications such as bone tunnel rupture, deep vein thrombosis in the lower limb and infection occurred in either group. CONCLUSION: 3D printed guides assisted with individualized ACL reconstruction may improve the accuracy of femoral tunnel positioning, which is safe and effective, while reducing the operative time and the number of intraoperative positioning, without increasing the length of incision, and may obtain higher functional scores and rotational stability of the knee joint, which is in line with the concept of individualized ACL reconstruction.

Effect of ST36 electroacupuncture on the switch of skeletal muscle fibres in mice with sciatic nerve dissociation.

Skeletal muscle is striated muscle that moves autonomously and is innervated by peripheral nerves. Peripheral nerve injury is very common in clinical treatment. However, the commonly used treatment methods often focus on the regeneration of the injured nerve but overlook the pathological changes in the injured skeletal muscle. Acupuncture, as the main treatment for denervated skeletal muscle atrophy, is used extensively in clinical practice. In the present study, a mouse model of lower limb sciatic nerve detachment was constructed and treated with electroacupuncture Stomach 36 to observe the atrophy of lower limb skeletal muscle and changes in skeletal muscle fibre types before and after electroacupuncture Stomach 36 treatment. Mice with skeletal muscle denervation showed a decrease in the proportion of IIa muscle fibres and an increase in the proportion of IIb muscle fibres, after electroacupuncture Stomach 36. The changes were reversed by specific activators of p38 MAPK, which increased IIa myofibre ratio. The results suggest that electroacupuncture Stomach 36 can reverse the change of muscle fibre type from IIb to IIa after denervation of skeletal muscle by inhibiting p38 MAPK. The results provide an important theoretical basis for the treatment of clinical peripheral nerve injury diseases with electroacupuncture, in addition to novel insights that could facilitate the study of pathological changes of denervated skeletal muscle.

A Novel Variable Selection Method Based on Binning-Normalized Mutual Information for Multivariate Calibration.

Variable (wavelength) selection is essential in the multivariate analysis of near-infrared spectra to improve model performance and provide a more straightforward interpretation. This paper proposed a new variable selection method named binning-normalized mutual information (B-NMI) based on information entropy theory. "Data binning" was applied to reduce the effects of minor measurement errors and increase the features of near-infrared spectra. "Normalized mutual information" was employed to calculate the correlation between each wavelength and the reference values. The performance of B-NMI was evaluated by two experimental datasets (ideal ternary solvent mixture dataset, fluidized bed granulation dataset) and two public datasets (gasoline octane dataset, corn protein dataset). Compared with classic methods of backward and interval PLS (BIPLS), variable importance projection (VIP), correlation coefficient (CC), uninformative variables elimination (UVE), and competitive adaptive reweighted sampling (CARS), B-NMI not only selected the most featured wavelengths from the spectra of complex real-world samples but also improved the stability and robustness of variable selection results.

Real-time in-line prediction of drug loading and release rate in the coating process of diclofenac sodium spheres based on near infrared spectroscopy.

The preparation of diclofenac sodium spheres by fluidized bed is a common production mode for the pharmaceutical preparations at present, but the critical material attributes in the production process is mostly analyzed off-line, which is time-consuming and laborious, and the analysis results lag behind. In this paper, the real-time in-line prediction of drug loading of diclofenac sodium and the release rate during the coating process was realized by using near infrared spectroscopy. For the best near infrared spectroscopy (NIRS) model of drug loading, R2cv, R2p, RMSECV, RMSEP were 0.9874, 0.9973, 0.002549 mg/g, 0.001515 mg/g respectively. For the best NIRS model of three release time points, the R2cv, R2p, RMSECV and RMSEP were 0.9755, 0.9823, 3.233%, 4.500%; 0.9358, 0.9965, 2.598%, 0.7939% and 0.9867, 0.9927, 0.4085%, 0.4726% respectively. And the analytical ability of these model was verified. The organic combination of these two parts of work constituted an important basis for ensuring the safety and effectiveness of diclofenac sodium spheres from the perspective of production process.

Correlation between stem cell molecular phenotype and atherosclerotic plaque neointima formation and analysis of stem cell signal pathways.

Vascular stem cells exist in the three-layer structure of blood vessel walls and play an indispensable role in angiogenesis under physiological conditions and vascular remodeling under pathological conditions. Vascular stem cells are mostly quiescent, but can be activated in response to injury and participate in endothelial repair and neointima formation. Extensive studies have demonstrated the differentiation potential of stem/progenitor cells to repair endothelium and participate in neointima formation during vascular remodeling. The stem cell population has markers on the surface of the cells that can be used to identify this cell population. The main positive markers include Stem cell antigen-1 (Sca1), Sry-box transcription factor 10 (SOX10). Stromal cell antigen 1 (Stro-1) and Stem cell growth factor receptor kit (c-kit) are still controversial. Different parts of the vessel have different stem cell populations and multiple markers. In this review, we trace the role of vascular stem/progenitor cells in the progression of atherosclerosis and neointima formation, focusing on the expression of stem cell molecular markers that occur during neointima formation and vascular repair, as well as the molecular phenotypic changes that occur during differentiation of different stem cell types. To explore the correlation between stem cell molecular markers and atherosclerotic diseases and neointima formation, summarize the differential changes of molecular phenotype during the differentiation of stem cells into smooth muscle cells and endothelial cells, and further analyze the signaling pathways and molecular mechanisms of stem cells expressing different positive markers participating in intima formation and vascular repair. Summarizing the limitations of stem cells in the prevention and treatment of atherosclerotic diseases and the pressing issues that need to be addressed, we provide a feasible scheme for studying the signaling pathways of vascular stem cells involved in vascular diseases.

S100A6 Activates Kupffer Cells via the p-P38 and p-JNK Pathways to Induce Inflammation, Mononuclear/macrophage Infiltration Sterile Liver Injury in Mice.

Noninfectious liver injury, including the effects of chemical material, drugs and diet, is a major cause of liver diseases worldwide. In chemical and drugs-induced liver injury, innate inflammatory responses are mediated by extracellular danger signals. The S100 protein can act as danger signals, which can promote the migration and chemotaxis of immune cells, promote the release of various inflammatory cytokines, and regulate the body's inflammatory and immune responses. However, the role of S100A6 in inflammatory response in chemical and drugs-induced sterile liver injury remains unclear. We constructed the model of sterile liver injury induced by carbon tetrachloride (CCl4)/Paracetamol (APAP) and performed RNA sequencing (RNA-seq) on the liver tissues after injury (days 2 and 5). We analyzed inflammatory protein secretion in the liver tissue supernatant by enzyme-linked immunosorbent assay (ELISA), determined the inflammation response by bioinformatic analysis during sterile liver injury, and assessed mononuclear/macrophage infiltration by immunohistochemistry and flow cytometry. Immunohistochemistry was used to analyze the location of S100A6. We conducted inflammatory factor expression analysis and molecular mechanistic studies in Kupffer cells (KCs) induced by S100A6 using quantitative reverse transcription-polymerase chain reaction (qRT-PCR), ELISA, and western blot in vitro experiments. We performed chemokine CCL2 expression analysis and molecular mechanism studies using the same method. We used a Transwell assay to show the infiltration of mononuclear/macrophage. We here observed that aggravated inflammatory response was shown in CCl4 and APAP-administrated mice, as evidenced by enhanced production of inflammatory cytokines (TNF-α, IL-1ß), and elevated mononuclear/macrophage infiltration and activation of immunity. The expression of S100A6 was significantly increased on day 2 after sterile liver injury, which is primarily produced by injured liver cells. Mechanistic studies established that S100A6 activates Kupffer cells (KCs) via the p-P38, p-JNK and P65 pathways to induce inflammation in vitro. Furthermore, TNF-α can stimulate liver cells via the p-P38 and p-JNK pathways to produce CCL2 and promote the infiltration of mononuclear/macrophage. In summary, we showed that S100A6 plays an important role in regulating inflammation, thus influencing sterile liver injury. Our findings provide novel evidence that S100A6 can as a danger signal that contributes to pro-inflammatory activation through p-P38 and p-JNK pathways in CCl4 and APAP-induced sterile liver injury in mice. In addition, the inflammatory factor TNF-α induces a large amount of CCL2 production in normal liver cells surrounding the injured area through a paracrine action, which is chemotactic for blood mononuclear/macrophage infiltration.

Progress in Multidisciplinary Treatment of Fournier's Gangrene.

Fournier's gangrene (FG) is a life-threatening and special form of necrotizing fasciitis, characterized by occult onset, rapid progress and high mortality, occurring mainly in men over 50 years of age. Risk factors of FG include diabetes, HIV infection, chronic alcoholism and other immunosuppressive state. FG was previously considered as an idiopathic disease, but in fact, three quarters of the infections originated from the skin, urethra and gastrointestinal tract. Initial symptoms of FG are often inconsistent with severity and can progress promptly to fatal infection. Although the treatment measures of FG have been improved in recent years, the mortality does not seem to have decreased significantly and remains at 20% - 30%. The time to identify FG and the waiting period before surgical debridement are directly related to the prognosis. Therefore, in addition to the combination of intensive fluid resuscitation and broad-spectrum antibiotics, treatment of FG should particularly emphasize the importance of early surgical debridement assisted with fecal diversion and skin reconstruction when necessary. This paper is to briefly summarize the progress in the definition, epidemiology, clinical manifestations, diagnosis, treatment and prognosis of Fournier's gangrene in recent years, more importantly, illustrates the importance of multidisciplinary cooperation in the management of FG.

DPP4 as a Potential Candidate in Cardiovascular Disease.

The rising prevalence of cardiovascular disease has become a global health concern. The occurrence of cardiovascular disease is the result of long-term interaction of many risk factors, one of which is diabetes. As a novel anti-diabetic drug, DPP4 inhibitor has been proven to be cardiovascular safe in five recently completed cardiovascular outcome trials. Accumulating studies suggest that DPP4 inhibitor has potential benefits in a variety of cardiovascular diseases, including hypertension, calcified aortic valve disease, coronary atherosclerosis, and heart failure. On the one hand, in addition to improving blood glucose control, DPP4 inhibitor is involved in controlling cardiovascular risk factors. On the other hand, DPP4 inhibitor directly regulates the occurrence and progression of cardiovascular diseases through a variety of mechanisms. In this review, we summarize the recent advances of DPP4 in cardiovascular disease, aiming to discuss DPP4 inhibitor as a potential option for cardiovascular therapy.

Upregulated miR-322-5p regulates cell cycle and promotes cell proliferation and apoptosis by directly targeting Wee1 in mice liver injury.

Liver injury from any number of causes (e.g. chemical material, drugs and diet, viral infection) is a global health problem, and its mechanism is not clearly understood. MicroRNAs (miRNAs) expression profiling is gaining popularity because miRNAs, as key regulators in gene expression networks, can influence many biological processes and have also shown promise as biomarkers for disease. Previous studies reported the regulation effects of miRNAs in liver injury, whereas function and molecular mechanisms of miR-322-5p were still unclear. Therefore, our study focused on the biological role of miR-322-5p in carbon tetrachloride (CCl4)-induced liver injury proliferation, apoptosis, and cell cycle. A mouse model of CCl4-induced liver injury was established, and the transcriptomes and miRNAs transcriptomes of 2d and 5d liver tissues after injury were sequenced. The expression of miR-322-5p and the cell cycle genes were detected in liver tissues and Hepa1-6 cell line by miRNA RT-PCR, qRT-PCR. The effects of miR-322-5p on liver cell proliferation, cell cycle and apoptosis were evaluated using MTS assays and flow cytometry analysis. The relationship between miR-322-5p and Wee1 was predicted and confirmed by bioinformatics analysis and a dual luciferase reporter assay. Functional experiments, including an MTS assay and flow cytometric analysis, were performed to study the effects of Wee1. MiR-322-5p was upregulated in injury liver tissues, and downregulated miR-322-5p was proved to inhibit proliferation, apoptosis and arrest cell cycle at G2/M in vitro. The dual-luciferase reporter assay results indicated that miR-322-5p has a binding site at position 285 in the Wee1 3´UTR. The effects of miR-322-5p in proliferation and cell cycle regulation can be abolished by Wee1 through rescue experiments. By directly targeting Wee1 influenced the expression of several cell cycle factors, including Cyclin dependent kinase 1 (Cdk1), cyclin B1 (Ccnb1) and Cell division cyclin 25C (Cdc25C). MiR-322-5p may function as a suppressive factor by negatively controlling Wee1, thus, highlighting the potential role of miR-322-5p as a therapeutic target for liver injury.Abbreviations: ALT: Alanine aminotransferase; AST: Aspartate aminotransferase; GSH: Glutathione, γ-glutamyl cysteinel + glycine; CCl4: Carbon tetrachloride; HE: Haematoxylin and eosin; KEGG: Kyoto Encyclopedia of Genes and Genomes.

Benefit Finding and Related Factors of Patients with Early-Stage Cancer in China.

(1) Background: Although the research on benefit finding (BF) in China has increased in recent years, it remains in its infancy. Few previous studies have focused on early-stage cancer patients. Therefore, this research study aimed to explore BF and its influencing factors for early-stage cancer patients in China. (2) Methods: From April to August 2019, 319 patients with early-stage cancer in the treatment period were selected by the convenience sampling method and evaluated using the Benefit Finding of Cancer Patients Scale-Chinese (BFS-C), Perceived Social Support Scale (PSSS), and Medical Coping Modes Questionnaire (MCMQ). (3) Results: The mean BF score was 47.57 (SD = 12.26). The results of the correlation analysis show that benefit finding was positively correlated with social support, but negatively correlated with acceptance-resignation. In addition, social support was negatively correlated with avoidance and acceptance-resignation. The results of the multiple linear regression indicate that the variables of self-assessment of disease severity, exercise time, coping mode (acceptance-resignation), and social support, affect BF. Finally, social support was shown to exert an intermediary effect on acceptance-resignation and BF. (4) Conclusions: In this study, the score of BF of patients with early-stage cancer was low. Medical staff should be more aware of the health behavior of patients with early-stage cancer, guide them to actively face the disease, and fully mobilize the social support of patients' friends and family, so as to help patients increase their disease BF.

Method development and validation of a near-infrared spectroscopic method for in-line API quantification during fluidized bed granulation.

Near-infrared spectroscopy (NIRS) is an excellent process analytical technology (PAT) tool for active pharmaceutical ingredient (API) quantification during fluidized granulation. Therefore, a portable near-infrared spectrometer combined with a new innovative method of extended iterative optimization technique (EIOT) was used to in-line monitor the API content uniformity during fluidized bed granulation. The principal component analysis (PCA) and partial least squares regression (PLSR) were also used to characterize and predict API concentration with changes from 75% to 125% of the label claim to prove the superiority of EIOT. The API content prediction accuracy of the EIOT method was verified through offline High Performance Liquid Chromatography (HPLC) measurement. Also, the spatial distribution of API in granules was visualized by Raman imaging technology. The results showed that the established NIRS method was suitable for the prediction of API content in fluidized bed granulation, which provides a new idea for the determination of API content during granulation.