RESUMO
Photonic ionogels with dual electrical and optical output have been intensively studied. However, tunable temperature-responsive photonic ionogel assembled by thermosensitive nanogels has not been studied yet. Herein, an innovative approach to fabricate photonic ionogels has been developed for smart wearable devices with tunable temperature sensitivity and structural color. Firstly, poly(isopropylacrylamide-r-phenylmaleanilic acid) P(NIPAm-r-NPMA) nanogels self-assemble into photonic crystals in 2-hydroxyethyl acrylate (HEA), water, and the ionic liquid of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate. And then robust photonic ionogels are developed through a polymerization of 2-hydroxyethyl acrylate crosslinked by poly(ethylene glycol) diacrylate (PEGDA). The incorporation of the ionic liquid, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate, enhances the mechanical strength of photonic ionogels and tunes the temperature-sensitivity of the ionogels, making them adaptable to various environmental conditions. The findings demonstrate that these ionogels can serve dual functions in smart wearable devices, combining electrical and optical signal outputs due to the conductivity of the ionic liquid and structural color from the nanogel assembly. The resultant photonic ionogels exhibit exceptional substrate adhesion, mechanical stability, and fast resilience. More significantly, the nanogels within these ionogels serve as the building blocks of photonic crystals (PCs) endow with angle-independent coloration and enhance stretchability beyond 200 %, while the stretchability of the ionogles without the nanogels is only about 100 %. Our photonic ionogels with tunable temperature-sensitivity and dual outputs will open an avenue to the development of the innovative smart wearable devices.
RESUMO
BRCA1 gene and carcinoembryonic antigen (CEA) are important markers of breast cancer, so accurate detection of them is significant for early detection and diagnosis of breast cancer. In this study, a potential-resolved ratio electrochemiluminescence (ECL) biosensor using perylene diimide (PDI)-metal-organic framework and DNA nanoflowers (NFs)-CdS quantum dots (QDs) was constructed for detection of BRCA1 and CEA. Specifically, PDI-MOF and CdS QDs can generate potential-resolved intense ECL signals only using one coreactant, so the detection procedure can be effectively simplified. PDI-MOF was first attached to the electrode by graphene oxide, and the dopamine (DA) probe was linked to quench the ECL signal by DNA hybridization. In the presence of target BRCA1, it can form a bipedal DNA walker, so the quenching molecules (DA) were detached from the electrode via the walker amplification process aided by Mg2+, so that the PDI signal at -0.25 V was restored for the BRCA1 assay. Moreover, CdS QDs@DNA NFs as amplified signal probes were formed by self-assembly, and the target CEA-amplified product introduced the CdS QDs@DNA NFs to the electrode, so the QD ECL signal at -1.42 V was enhanced, while the ECL signal of PDI is unchanged; thus, CEA detection was achieved by the ratio value between them. Therefore, the detection accuracy is guaranteed by detection of two cancer markers and a ratio value. This biosensor has a great contribution to the development of new ECL materials and a novel ECL technique for fast and efficient multitarget assays, showing great significance for the early monitoring and diagnosis of breast cancer.
Assuntos
Proteína BRCA1 , Técnicas Biossensoriais , Compostos de Cádmio , Antígeno Carcinoembrionário , DNA , Técnicas Eletroquímicas , Imidas , Medições Luminescentes , Perileno , Pontos Quânticos , Sulfetos , Perileno/química , Perileno/análogos & derivados , Pontos Quânticos/química , Compostos de Cádmio/química , Técnicas Biossensoriais/métodos , Sulfetos/química , Técnicas Eletroquímicas/métodos , Imidas/química , DNA/química , Humanos , Proteína BRCA1/genética , Proteína BRCA1/análise , Antígeno Carcinoembrionário/análise , Antígeno Carcinoembrionário/sangue , Estruturas Metalorgânicas/químicaRESUMO
BACKGROUND: Extracorporeal membrane oxygenation (ECMO) represents an important but limited treatment for patients with severe COVID-19. We assessed the effects of an educational intervention on a person's ECMO care preference and examined whether patients and providers had similar ECMO preferences. METHODS: In the Video+Survey group, patients watched an educational video about ECMO's purpose, benefits, and risks followed by an assessment of ECMO knowledge and care preferences in seven scenarios varying by hypothetical patient age, function, and comorbidities. Patients in the Survey Only group and providers didn't watch the video. Logistic regression was used to estimate the probability of agreement for each ECMO scenario between the two patient groups and then between all patients and providers. RESULTS: Video+Survey patients were more likely (64% vs. 17%; p = 0.02) to correctly answer all ECMO knowledge questions than Survey Only patients. Patients in both groups agreed that ECMO should be considered across all hypothetical scenarios, with predicted agreement above 65%. In adjusted analyses, patients and providers had similar predicted agreement for ECMO consideration across six of the seven scenarios, but patients showed greater preference (84% vs. 41%, p = 0.003) for the scenario of a functionally dependent 65-year-old with comorbidities than providers. DISCUSSION AND CONCLUSIONS: An educational video increased a person's ECMO knowledge but did not change their ECMO preferences. Clinicians were less likely than patients to recommend ECMO for older adults, so advanced care planning discussion between patients and providers about treatment options in critically ill patients with COVID-19 is critical.
Assuntos
COVID-19 , Oxigenação por Membrana Extracorpórea , Educação de Pacientes como Assunto , Preferência do Paciente , Humanos , COVID-19/terapia , COVID-19/epidemiologia , Masculino , Feminino , Pessoa de Meia-Idade , Adulto , Educação de Pacientes como Assunto/métodos , Idoso , Inquéritos e Questionários , SARS-CoV-2 , Pessoal de Saúde/psicologia , Conhecimentos, Atitudes e Prática em SaúdeRESUMO
This study introduces a novel virtual cursor control system designed to empower individuals with neuromuscular disabilities in the digital world. By combining eye-tracking with motor imagery (MI) in a hybrid brain-computer interface (BCI), the system enhances cursor control accuracy and simplicity. Real-time classification accuracy reaches 87.92% (peak of 93.33%), with cursor stability in the gazing state at 96.1%. Integrated into common operating systems, it enables tasks like text entry, online chatting, email, web surfing, and picture dragging, with an average text input rate of 53.2 characters per minute (CPM). This technology facilitates fundamental computing tasks for patients, fostering their integration into the online community and paving the way for future developments in BCI systems.
RESUMO
Despite recent revolutionary advancements in photovoltaic (PV) technology, further improving cell efficiencies toward their Shockley-Queisser (SQ) limits remains challenging due to inherent optical, electrical, and thermal losses. Currently, most research focuses on improving optical and electrical performance through maximizing spectral utilization and suppressing carrier recombination losses, while there is a serious lack of effective opto-electro-thermal coupled management, which, however, is crucial for further improving PV performance and the practical application of PV devices. In this article, the energy conversion and loss processes of a PV device (with a specific focus on perovskite solar cells) are detailed under both steady-state and transient processes through rigorous opto-electro-thermal coupling simulation. By innovatively coupling multi-physical behaviors of photon management, carrier/ion transport, and thermodynamics, it meticulously quantifies and analyzes energy losses across optical, electrical, and thermal domains, identifies heat components amenable to regulation, and proposes specific regulatory means, evaluates their impact on device efficiency and operating temperature, offering valuable insights to advance PV technology for practical applications.
RESUMO
Radiotherapy (RT)-induced in situ vaccination greatly promotes the development of personalized cancer vaccines owing to the massive release of antigens initiated by tumor-localized RT eliciting the tumor-specific immune response. However, its broad application in cancer treatment is seriously impeded by poor antigen cross-presentation, low response rate, and short duration of efficacy. Herein, the tumor-antigen-capturing nanosystem dAuNPs@CpG consisting of gold nanoparticles, 3,5-cyclohexanedione (CHD), and immunoadjuvant CpG were fabricated to enhance RT-induced vaccination. Taking advantage of the specific covalent binding between CHD and sulfenic acids of antigen proteins, we show that this nanoplatform has an unexpected potential to capture the sulfenylated tumor-derived protein antigens (TDPAs) induced by RT to in situ generate a vaccination effect, achieving significant growth suppression of both primary and distant tumors in combination with PD-1 blockade. We thus believe that our work presents a powerful and effective means to improve the synergistic tumor radioimmunotherapy.
RESUMO
This research proposes a simple and novel strategy for the green detection of antibiotics along with the reduction of microplastic and humic acid (HA) hazards. The entire process is based on a single-step solvent-sieving method to separate HA into insoluble (IHA) and soluble (SHA) components, subsequently recombining and designing the application according to the original characteristics of selected fractions in accordance with the zero-waste principle. IHA was applied as a dispersive solid phase extraction (DSPE) sorbent without chemical modification for the enrichment of trace MACs in complex biological matrices. The recovery of MACs was 74.06-100.84 % in the range of 2.5-1000 µgâkg-1. Furthermore, SHA could be combined with biodegradable polyvinyl alcohol (PVA) to prepare multifunctional composite films. SHA endows the PVA film with favorable mechanical properties, excellent UV shielding as well as oxidation resistance performance. Compared with pure PVA, the tensile strength, toughness, antioxidant and UV-protection properties were increased to 157.3 Mpa, 258.6 MJ·m-3, 78.6 % and 60 % respectively. This study achieved a green and economically valuable utilization of all components of waste HA, introduced a novel approach for monitoring and controlling harmful substances and reducing white pollution. This has significant implications for promoting sustainable development and recovering valuable resources.
Assuntos
Antibacterianos , Substâncias Húmicas , Álcool de Polivinil , Substâncias Húmicas/análise , Antibacterianos/química , Antibacterianos/análise , Álcool de Polivinil/química , Extração em Fase Sólida/métodos , Química Verde , Resistência à TraçãoRESUMO
In recent years, due to the abuse of antibiotics, nitro explosives and pesticides, which have caused great harm to the environment and human health, social concerns have prompted researchers to develop more sensitive detection platforms for these pollutants. In this paper, a novel two-dimensional Zn (II) coordination polymer, [Zn(L)0.5(1,2-bimb)]·DMF (1), [H4L=[1,1':4',1''-terphenyl]-2, 2'',4, 4'' -tetracarboxylic acid, 1,2-bimb = 1,2-bis(imidazol-1-ylmethyl)benzene] was synthesized using a hydro-solvothermal method. Among commonly used organic solvents, 1 exhibits significant stability. Fast and efficient fluorescence response can be achieved for tetracycline (TET), 4-nitrophenol (4-NP), fluazinam (FLU), and abamectin benzoate (AMB) with low detection limits. A binary intelligent logic gate device with FLU and AMB as chemical input signals is successfully constructed, which provides a new idea for biochemical detection. In addition, a portable visual test paper has been prepared, which has high sensitivity, good selectivity, and simple operation. It can be used for rapid detection of pollutants in daily life and has broad application prospects. Finally, a detailed discussion was conducted on the fluorescence sensing mechanism of 1 for detecting TET, 4-NP, AMB and FLU.
RESUMO
Soft and stretchable electronics have garnered significant attention in various fields, such as wearable electronics, electronic skins, and soft robotics. However, current wearable electronics made from materials like conductive elastomers, hydrogels, and liquid metals face limitations, including low permeability, poor adhesion, inadequate conductivity, and limited stretchability. These issues hinder their effectiveness in long-term healthcare monitoring and exercise monitoring. To address these challenges, we introduce a novel design of web-droplet-like electronics featuring a semi-liquid metal coating for wearable applications. This innovative design offers high permeability, excellent stretchability, strong adhesion, and good conductivity for the electronic skin. The unique structure, inspired by the architecture of a spider web, significantly enhances air permeability compared to commercial breathable patches. Furthermore, the distribution of polyborosiloxane mimics the adhesive properties of spider web mucus, while the use of semi-liquid metals in this design results in remarkable conductivity (9 × 106 S/m) and tensile performance (up to 850% strain). This advanced electronic skin technology enables long-term monitoring of various physiological parameters and supports machine learning recognition functions with unparalleled advantages. This web-droplet structure design strategy holds great promise for commercial applications in medical health monitoring and disease diagnosis.
RESUMO
Silicon (Si) shows great potential as an anode material for lithium-ion batteries. However, it experiences significant expansion in volume as it undergoes the charging and discharging cycles, presenting challenges for practical implementation. Nanostructured Si has emerged as a viable solution to address these challenges. However, it requires a complex preparation process and high costs. In order to explore the above problems, this study devised an innovative approach to create Si/C composite anodes: micron-porous silicon (p-Si) was synthesized at low cost at a lower silver ion concentration, and then porous silicon-coated carbon (p-Si@C) composites were prepared by compositing nanohollow carbon spheres with porous silicon, which had good electrochemical properties. The initial coulombic efficiency of the composite was 76.51%. After undergoing 250 cycles at a current density of 0.2 A·g-1, the composites exhibited a capacity of 1008.84 mAh·g-1. Even when subjected to a current density of 1 A·g-1, the composites sustained a discharge capacity of 485.93 mAh·g-1 even after completing 1000 cycles. The employment of micron-structured p-Si improves cycling stability, which is primarily due to the porous space it provides. This porous structure helps alleviate the mechanical stress caused by volume expansion and prevents Si particles from detaching from the electrodes. The increased surface area facilitates a longer pathway for lithium-ion transport, thereby encouraging a more even distribution of lithium ions and mitigating the localized expansion of Si particles during cycling. Additionally, when Si particles expand, the hollow carbon nanospheres are capable of absorbing the resulting stress, thus preventing the electrode from cracking. The as-prepared p-Si utilizing metal-assisted chemical etching holds promising prospects as an anode material for lithium-ion batteries.
RESUMO
Heavy metals (HMs) seriously harm soil environment and threaten crop quality and human health. The aim of the study was to investigate the characteristics, quantify the sources and assess the risks of HMs in soil of upper Bailang River Basin (UBRB). The results indicated that the soils in UBRB were at a non-polluted level and posed a low ecological risk to the environment as a whole. The main pollutants were Ni and Cr obtained by indices Pi and Igeo. Based on the consideration of toxicity, the fuzzy comprehensive evaluation model and Ei index revealed that Hg and Cd were dominating pollutants and ecological risk factors of soil in UBRB. The positive matrix factorization model ascertained five potential sources of soil HMs, namely, plastic processing, energy activities, parent material, transportation and agriculture mixed source and industrial manufacturing, with contribution rates of 17%, 7%, 15%, 29% and 32%, respectively. Natural source primarily determined the non-carcinogenic risk for all populations, accounting for about 43% of the total risk. Industrial manufacturing mainly determined the carcinogenic risk, accounting for about 45%. For adults, the risk was acceptable for most of the sample points. For children, potential non-carcinogenic risks were present in 13.19% of the sample sites, which were mainly located in the west, and unacceptable carcinogenic risks were present in 57.21% of the sample sites, which were mainly concentrated in the western and central parts.
Assuntos
Monitoramento Ambiental , Metais Pesados , Rios , Poluentes do Solo , Metais Pesados/análise , Medição de Risco , Poluentes do Solo/análise , China , Humanos , Rios/química , Monitoramento Ambiental/métodos , Adulto , CriançaRESUMO
Transcatheter aortic valve replacement (TAVR) has emerged as a revolutionary treatment for aortic stenosis. However, TAVR prices vary considerably, and factors associated with this variation remain unclear. We aim to describe the variation in TAVR prices in relation to hospital financial performance among institutions ranked by the U.S. News and World Report (USNWR). Using a modified two-part model, we examined financial and operational characteristics (TAVR performance scores, median all-payer within-hospital TAVR price, net hospital profit margin, hospital markups [i.e., charge-to-cost ratio], bed days available, and CMS wage index) of 640 TAVR-performing hospitals ranked by the USNWR. After determining observed to expected (O:E) ratios for TAVR prices for each hospital, we then examined hospital characteristics across O:E quintiles. Overall, price disclosure was 48.6% (n=311). Between the lowest and highest O:E quintiles, median hospital markup (4.75 vs 5.33; p=0.41) and median net hospital margin (1.76 vs 3.15; p=0.12) were comparable. The highest O:E ratio quintile had lower median TAVR prices compared to the lowest O:E ratio quintile ($72,129.12 vs $49,022.03; p<0.001). Most significantly, TAVR price IQR's within hospitals had a linear decline from the lowest to the highest O:E ratio quintiles ($119,043 vs $27,240; p<0.001). USNWR ranking scores had no significant variation across the quintiles (p=0.95). We concluded that hospitals that charge more than expected for TAVRs do not have higher profit margins nor markups and are not higher ranked by USNWR as those that charge less than expected. Additionally, with higher observed over expected TAVR prices, the variation in TAVR rates within hospitals decreased linearly. Finally, O:E TAVR price ratios appear to have no association with publicly reported hospital quality.
RESUMO
The exploration of cell-based drug delivery systems for cancer therapy has gained growing attention. Approaches to engineering therapeutic cells with multidrug loading in an effective, safe, and precise manner while preserving their inherent biological properties remain of great interest. Here, we report a strategy to simultaneously load multiple drugs in platelets in a one-step fusion process. We demonstrate doxorubicin (DOX)-encapsulated liposomes conjugated with interleukin-15 (IL-15) could fuse with platelets to achieve both cytoplasmic drug loading and surface cytokine modification with a loading efficiency of over 70 % within minutes. Due to their inherent targeting ability to metastatic cancers and postoperative bleeding sites, the engineered platelets demonstrated a synergistic therapeutic effect to suppress lung metastasis and postoperative recurrence in mouse B16F10 melanoma tumor models.
RESUMO
Gene delivery has revolutionized conventional medical approaches to vaccination, cancer, and autoimmune diseases. However, current gene delivery methods are limited to either intravenous administration or direct local injections, failing to achieve well biosafety, tissue targeting, drug retention, and transfection efficiency for desired therapeutic outcomes. Transdermal drug delivery based on various delivery strategies can offer improved therapeutic potential and superior patient experiences. Recently, there has been increased foundational and clinical research focusing on the role of the transdermal route in gene delivery and exploring its impact on the efficiency of gene delivery. This review introduces the recent advances in transdermal gene delivery approaches facilitated by drug formulations and medical devices, as well as discusses their prospects.
Assuntos
Administração Cutânea , Técnicas de Transferência de Genes , Humanos , Animais , Terapia Genética/métodos , Pele/metabolismo , Sistemas de Liberação de MedicamentosRESUMO
In this study, a novel electrochemiluminescence (ECL) biosensor was developed to detect microRNA-21 (miRNA-21) with high sensitivity by leveraging the combined mechanisms of resonance energy transfer (RET) and surface plasmon coupling (SPC). Initially, the glassy carbon electrode (GCE) were coated with Cu-Zn-In-S quantum dots (CZIS QDs), known for their defect-related emission suitable for ECL sensing. Subsequently, a hairpin DNA H3 with gold nanoparticles (Au NPs) attached at the end was modified over the surface of the quantum dots. The Au NPs could effectively quench the ECL signals of CZIS QDs via RET. Further, a significant amount of report DNA was generated through the action of a 3D DNA walker. When the report DNA opened H3-Au NPs, the hairpin structure experienced a conformational change to a linear shape, increasing the gap between the CZIS QDs and the Au NPs. Consequently, the localized surface plasmon resonance ECL (LSPR-ECL) effect replaced ECL resonance energy transfer (ECL-RET). Moreover, the report DNA was released following the addition of H4-Au NPs, resulting in the formation of Au dimers and a surface plasma-coupled ECL (SPC-ECL) effect that enhanced the ECL intensity to 6.97-fold. The integration of new ECL-RET and SPC-ECL biosensor accurately quantified miRNA-21 concentrations from 10-8 M to 10-16 M with a limit of detection (LOD) of 0.08 fM, as well as successfully applied to validate human serum samples.
Assuntos
Técnicas Biossensoriais , DNA , Técnicas Eletroquímicas , Medições Luminescentes , MicroRNAs , Pontos Quânticos , Ressonância de Plasmônio de Superfície , MicroRNAs/análise , MicroRNAs/sangue , Humanos , Técnicas Eletroquímicas/métodos , Técnicas Biossensoriais/métodos , DNA/química , Pontos Quânticos/química , Ressonância de Plasmônio de Superfície/métodos , Medições Luminescentes/métodos , Ouro/química , Limite de Detecção , Transferência de Energia , Nanopartículas Metálicas/químicaRESUMO
Brewer's spent grain (BSG), one of the main byproducts of brewing, has been widely used in the food industry due to its high nutritional components of dietary fiber, proteins, polysaccharides, and polyphenols. This study investigated the influence of wheat brewer's spent grain (WBSG) on the physicochemical properties of dough and steamed bread-making performance. The incorporation of WBSG in wheat flour significantly increased water absorption, development time, and degree of softening while decreasing the stability time of blending dough. Excessive WBSG up to 20% restricted the dough formation. WBSG contributed to the remarkable increase of pasting viscosities, pasting temperature, and immobilized water proportion in doughs. For all doughs, storage moduli (G') were higher than viscous moduli (Gâ³). WBSG addition resulted in higher moduli values and the formation of highly networked gluten structure, finally leading to the lower specific volume, spread ratio, and elasticity of bread. Lightness (L*) of bread decreased with increasing WBSG while redness (a*) and total color difference (ΔE) augmented. Low WBSG addition (≤5%) could endow steamed bread with the appearance of a chocolate-like color and pleasant malt flavor, which is acceptable for most consumers. Nevertheless, the improvement of nutritional and functional characteristics of steamed bread incorporated with WBSG should be more focused in the future.
RESUMO
The efficacy of adoptive T cell therapy (ACT) for the treatment of solid tumors remains challenging. In addition to the poor infiltration of effector T (Teff) cells limited by the physical barrier surrounding the solid tumor, another major obstacle is the extensive infiltration of regulatory T (Treg) cells, a major immunosuppressive immune cell subset, in the tumor microenvironment. Here, this work develops a grooved microneedle patch for augmenting ACT, aiming to simultaneously overcome physical and immunosuppressive barriers. The microneedles are engineered through an ice-templated method to generate the grooved structure for sufficient T-cell loading. In addition, with the surface modification of chemokine CCL22, the MNs could not only directly deliver tumor-specific T cells into solid tumors through physical penetration, but also specifically divert Treg cells from the tumor microenvironment to the surface of the microneedles via a cytokine concentration gradient, leading to an increase in the ratio of Teff cells/Treg cells in a mouse melanoma model. Consequently, this local delivery strategy of both T cell receptor T cells and chimeric antigen receptor T cells via the CCL22-modified grooved microneedles as a local niche could significantly enhance the antitumor efficacy and reduce the on-target off-tumor toxicity of ACT.
Assuntos
Imunoterapia Adotiva , Agulhas , Linfócitos T Reguladores , Animais , Linfócitos T Reguladores/imunologia , Camundongos , Imunoterapia Adotiva/métodos , Microambiente Tumoral , Linhagem Celular Tumoral , Quimiocina CCL22/metabolismo , Humanos , Camundongos Endogâmicos C57BL , Neoplasias/terapia , Neoplasias/imunologiaRESUMO
In this study, we have for the first time constructed a ratiometric ECL biosensor for the ultrasensitive detection of microRNAs (miRNAs) using gold nanoparticles (Au NPs) to trigger both the low-potential emission from conjugated polymer poly(9,9-dioctylfluorene-2,7-diyl) dots (PFO Pdots) and the LSPR-ECL effect with sulfur-doped boron nitride quantum dots (S-BN QDs). PFO Pdots were first applied to the Au NPs-modified electrode, followed by covalent binding to capture the hairpin H1. Immediately thereafter, a small amount of miRNA-141 was able to generate a large amount of output DNA (OP) by traversing the target cycle. OP, H3-S-BN QDs, and H4-glucose oxidase (H4-GOD) were then added sequentially to the Au NPs-modified electrode surface, and the hybridization chain reaction (HCR) was initiated. This resulted in the introduction of a large amount of GOD into the system, which catalyzed the in situ formation of the co-reactant hydrogen peroxide (H2O2) from the substrate glucose. Due to the electron transfer effect, the production of H2O2 led to the ECL quenching of PFO Pdots. Meanwhile, H2O2 served as a co-reactant of S-BN QDs, resulting in strong ECL emission of S-BN QDs at the cathode. Furthermore, the cathodic ECL intensity of S-BN QDs was further enhanced by an LSPR-ECL mechanism between Au NPs and S-BN QDs. By measuring the ratio of ECL intensities at two excitation potentials, this approach could provide sensitive and reliable detection of miRNA-141 in the range of 0.1 fM â¼10 nM, with a detection limit of 0.1 fM.
Assuntos
Técnicas Biossensoriais , Técnicas Eletroquímicas , Ouro , Limite de Detecção , Medições Luminescentes , Nanopartículas Metálicas , MicroRNAs , Pontos Quânticos , Técnicas Biossensoriais/métodos , Ouro/química , MicroRNAs/análise , Nanopartículas Metálicas/química , Pontos Quânticos/química , Técnicas Eletroquímicas/métodos , Humanos , Medições Luminescentes/métodos , Fluorenos/química , Glucose Oxidase/química , Peróxido de Hidrogênio/químicaRESUMO
Ichthyotoxic red tide is a problem that the world is facing and needs to solve. The use of antialgal compounds from marine macroalgae to suppress ichthyotoxic red tide is considered a promising biological control method. Antialgal substances were screened and isolated from Bangia fusco-purpurea, Gelidium amansii, Gloiopeltis furcate, Hizikia fusifarme, Laminaria japonica, Palmaria palmata, and Sargassum sp. to obtain new materials for the development of algaecides against ichthyotoxic red tide microalgae using bioactivity-guided isolation methods. The fractions of seven macroalgae exhibited selective inhibitory activities against Amphidinium carterae and Karenia mikimotoi, of which the ethyl acetate fractions had the strongest and broadest antialgal activities for the two tested red tide microalgae. Their inhibitory effects on A. carterae and K. mikimotoi were even stronger than that of potassium dichromate, such as ethyl acetate fractions of B. purpurea, H. fusifarme, and Sargassum sp. Thin-layer chromatography and ultraviolet spectroscopy were further carried out to screen the ethyl acetate fraction of Sargassum sp. Finally, a new glycolipid derivative, 2-O-eicosanoyl-3-O-(6-amino-6-deoxy)-ß-D-glucopyranosyl-glycerol, was isolated and identified from Sargassum sp., and it was isolated for the first time from marine macroalgae. The significant antialgal effects of 2-O-eicosanoyl-3-O-(6-amino-6-deoxy)-ß-D-glucopyranosyl-glycerol on A. carterae and K. mikimotoi were determined.