The performance of quaternary-ammonium chitosan in wastewater treatment: The overlooked role of solubility.

Quaternary-ammonium chitosan (CT-CTA) is a popular water treatment agent, and its electropositivity and cation strength are improved compared with chitosan. The use of CT-CTA is widely advocated to remove suspended particles and organic matter from wastewater. However, the solubility of CT-CTA is an important factor affecting the performance of CT-CTA, which is a neglected problem in previous studies. In the study, CT-CTA with different solubilities were prepared by adjusting pH from 2 to 7 in preparation, and their applications were explored in wastewater. When the pH was 2, 2.5, or 3, the obtained CT-CTA was a dissolved state. The turbidity and color removal were 95 % - 98 % and 60 % - 74 %, respectively. When the pH was 4, 5, 6, or 7, the obtained CT-CTA was a solid state. The turbidity and color removal were 30 % - 63 % and 90 % - 97 %, respectively. For domestic-wastewater treatment, CT-CTA in a dissolved state removed 92 % of turbidity and 50 % of chemical oxygen demand (COD). CT-CTA in a solid state removed 86 % of turbidity and 64 % of COD with poly aluminum chloride (PAC). The results illustrated the performance of CT-CTA with different solubilities, which can broaden its application in wastewater treatment.

Highly Stable Amide-Functionalized Zirconium-Organic Frameworks: Synthesis, Structure, and Methane Storage Capacity.

With the development of crystalline porous materials toward methane storage, the stability issue of metal-organic framework (MOF) materials has caused great concern despite high working capacity. Considering the high stability of zirconium-based MOFs and effective functions of amide groups toward gas adsorption, herein, a series of UiO-66 type of Zr-MOFs, namely, Zr-fcu-H/F/CH3/OH, were successfully designed and synthesized by virtue of amide-functionalized dicarboxylate ligands bearing distinct side groups (i.e., -H, -F, -CH3, and -OH) and ZrCl4 in the presence of trifluoroacetic acid as the modulator. Single-crystal X-ray diffraction and topology analyses reveal that these compounds are archetypal fcu MOFs encompassing octahedral and tetrahedral cages, respectively. The N2 sorption isotherms and acid-base stability tests demonstrate that the materials possess not only relatively high surface areas, pore volumes, and appropriate pore sizes but also great hydrolytic stabilities ranging pH = 3-11. Furthermore, the volumetric methane storage working capacities of Zr-fcu-H, Zr-fcu-F, Zr-fcu-CH3, and Zr-fcu-OH at 298/273 K and 80 bar are 187/217, 175/193, 167/187, and 154/171 cm3 (STP) cm-3, respectively, which indicate that the zirconium-based crystalline porous materials are capable of storing relatively high amounts of methane.

Protective effects of phosphocreatine on human vascular endothelial cells against hydrogen peroxide-induced apoptosis and in the hyperlipidemic rat model.

Phosphocreatine (PCr) has been shown to have a cardio-protective effect during cardiopulmonary resuscitation (CPR). However, little is known about its impact on atherosclerosis. In this study, we first evaluated the pharmacological effects of PCr on antioxidative defenses and mitochondrial protection against hydrogen peroxide (H2O2) induced human umbilical vascular endothelial cells (HUVECs) damage. Then we investigated the hypolipidemic and antioxidative effects of PCr on hyperlipidemic rat model. Via in vitro studies, H2O2 significantly reduced cell viability and increased apoptosis rate of HUVECs, while pretreatment with PCr abolished its apoptotic effect. PCr could reduce the generation of ROS induced by H2O2. Moreover, PCr could increase the activity of SOD and the content of NO, as well as decrease the activity of LDH and the content of MDA. PCr could also antagonize H2O2-induced up-regulation of Bax, cleaved-caspase3, cleaved-caspase9, and H2O2-induced down-regulation of Bcl-2 and p-Akt/Akt ratio. In addition, PCr reduced U937 cells' adhesion to H2O2-stimulated HUVECs. Via in vivo study, PCr could decrease MDA, TC, TG and LDL-C levels in hyperlipidemic rats. Finally, different-concentration PCr could increase the leaching of TC, HDL, and TG from fresh human atherosclerotic plaques. In conclusion, PCr could suppress H2O2-induced apoptosis in HUVECs and reduce hyperlipidemia through inhibiting ROS generation and modulating dysfunctional mitochondrial system, which might be an effective new therapeutic strategy to further prevent atherosclerosis.

Cellulose cryogels from herbal residues for oily wastewater purification.

Recycling herbal residues for oily wastewater purification is a potential way to use the wastes to treat wastes. Cellulose extracted from herbal residues is a fine material for cryogel fabrication. However, the cellulose cryogels were not suitable for oily wastewater treatment due to their amphiphilicity. To address this issue, the cryogels were modified with methyltrimethoxysilane (MTMS), which made them hydrophobic and reduced their surface energy. In this study, the herbal residues (Ficus microcarpa L. f) were used in cryogel preparation for the first time. The cryogels exhibit super lightweight and low density. The modified cryogels show excellent sorption capacity for free oils, especially silicone oil (51.22 g/g), and outperformed some recent sorbents. They also effectively separated water-in-toluene emulsion stabilized by Span 80, with a separation efficiency of 98.57 % and a flux of 1474.67 L/m2h. This study demonstrated a novel application of waste herbal residues in the field of environmental remediation.

Carbon-Encapsulated Magnetite Nanodoughnut as a NIR-II Responsive Nanozyme for Synergistic Chemodynamic-Photothermal Therapy.

Magnetite-based nanozymes have attracted great interest for catalytic cancer therapy enabled by catalyzing hydrogen peroxide (H2 O2 ) to produce highly toxic hydroxyl radicals (•OH) to kill tumor cells. However, their therapeutic efficacies remain low due to insufficient •OH. Here, a light-responsive carbon-encapsulated magnetite nanodoughnuts (CEMNDs) with dual-catalytic activities for photothermal-enhanced chemodynamic therapy (CDT) is reported. The CEMNDs can accumulate in tumor and get into tumor cells and effectively act as peroxidase to convert H2 O2 to •OH that causes tumor cell death. The CEMNDs also possess intrinsic glutathione oxidase-like activity that which catalyzes the oxidation of reduced glutathione and produce lipid peroxidase for enhanced catalytic therapy. Furthermore, the CEMNDs can absorb 1064 nm light to elevate local temperature and increase release of Fe ions for photothermal therapy and enhanced CDT respectively. The in vivo experiments in an aggressive and drug-resistant metastatic mouse model of triple negative breast cancer model demonstrate excellent synergistic anti-tumor function and no measurable systemic toxicity of CEMNDs.

Hydrophobic Carbon Dots Derived from Organic Pollutants and Applications in NIR Anticounterfeiting and Bioimaging.

In an effort to fulfill the strategy of sustainable development, Rhodamine B, a common and toxic organic pollutant in the textile industry, was reported for the first time as a single precursor to develop a kind of novel hydrophobic nitrogen-doped carbon dot (HNCD) through a green and facile one-pot solvothermal method. The HNCDs with an average size of 3.6 nm possess left and right water contact angles of 109.56° and 110.34°, respectively. The HNCDs manifest excitation wavelength-tunable and upconverted fluorescence from the ultraviolet (UV) to the near-infrared (NIR) range. Furthermore, the PEGylation of HNCDs enables them to be used as an optical marker for cell and in vivo imaging. Notably, the HNCDs with solvent-dependent fluorescence can be used for invisible inks with a wide range of light responses from UV-vis-NIR spectra. This work not only provides an innovative way to recycle chemical waste but also expands the potential application of HNCDs in NIR security printing and bioimaging.

Darinaparsin (ZIO-101) enhances the sensitivity of small-cell lung cancer to PARP inhibitors.

Small-cell lung cancer (SCLC) is an aggressive high-grade neuroendocrine carcinoma of the lung associated with early metastasis and an exceptionally poor prognosis. Little progress has been made in developing efficacious targeted therapy for this recalcitrant disease. Herein, we showed that H3.3, encoded by two genes (H3F3A and H3F3B), was prominently overexpressed in SCLC. Darinaparsin (ZIO-101), a derivative of arsenic trioxide, dose- and time-dependently inhibited the viability of SCLC cells in an H3.3-dependent manner. More importantly, ZIO-101 treatment resulted in substantial accumulation of H3.3 and PARP1 besides induction of G2/M cell cycle arrest and apoptosis in SCLC cells. Through integrative analysis of the RNA-seq data from Cancer Cell Line Encyclopedia dataset, JNCI and Genomics of Drug Sensitivity in Cancer 2 datasets, we found that H3F3A expression was negatively correlated with the IC50 values of PARP inhibitors (PARPi). Furthermore, co-targeting H3.3 and PARP1 by ZIO-101 and BMN673/olaparib achieved synergistic growth inhibition against SCLC in vitro and in vivo. In conclusion, it is feasible to target H3.3 by ZIO-101 to potentiate the response rate of PARPi in SCLC patients.

Desolvation-Degree-Induced Structural Dynamics in a Rigid Cerium-Organic Framework Exhibiting Tandem Purification of Ethylene from Acetylene and Ethane.

Due to the industrial requirements for high production and high quality of ethylene, efficient purification of ethylene from acetylene and ethane is of prime importance but challenging. Dynamic metal-organic frameworks (MOFs) have demonstrated intriguing structural dynamics and diverse applications recently. Among them, although a few flexible ones have exhibited interesting ethylene purification capability, rigid ones were yet barely investigated for such purpose. In this regard, a cerium(III)-based MOF was solvothermally synthesized, which is rigid and assembled from rod molecular building blocks associated with coordinative N,N-dimethylformamide (DMF) molecules. After liberating different degrees of DMF ligands via heating under vacuum or acetone exchange, both partially desolvated compounds of Ce-MOF-1 and Ce-MOF-2 were concertedly isolated in a fashion of single-crystal to single-crystal transformation. Although both newly generated materials crystallize in the same space group, they exhibit dissimilar unit cell parameters and slightly distinct ultramicropore sizes and pore microenvironments, thanks to the discrepancy in the desolvation degree. Consequently, Ce-MOF-1 and Ce-MOF-2 individually demonstrate C2H2- and C2H6-selective adsorption behavior, resulting in the potential tandem separation of C2H4 from C2H2 and C2H6 mixtures. The above results were successfully supported by not only single gas adsorption isotherms but also grand canonical Monte Carlo (GCMC) calculation studies and dynamic breakthrough experiments. The present work may pave the way for rigid MOFs aiming at advancing applications via solid-state structural dynamics.

Pyrolysis of sulfuric acid-treated chrome-tanned leather wastes: Kinetics, mechanism and evolved gas analysis.

Management and safe disposal of chrome-tanned leather wastes generated in leather industry are of great importance due to their potential health risks and environmental hazards. Herein, an integrated strategy was proposed for disposing of chrome-tanned leather scrap (CTLS). This method involves the separation of chromium salts from CTLS with sulfuric acid for recycling purpose, followed by pyrolysis of the acid-treated CTLS in an inert atmosphere. SEM/EDX analysis was employed to characterize the changes in composition and morphology of CTLS after acid treatment. CO2 and H2O are main pyrolysis gases of CTLS, while the acid treatment increases the relative content of aliphatic hydrocarbons and NH3 in evolved gases. The pyrolysis characteristics and kinetics of the acid-treated CTLS were investigated by thermogravimetric analysis (TGA) at three different heating rates. After 3 and 6 days of acid treatment, the average activation energy of CTLS (450.9 kJ/mol) obtained from the Flynn-Wall-Ozawa method decreased to 369.6 and 351.0 kJ/mol, respectively. It is assumed that the CTLS consists of two pseudocomponents: low-crosslinked collagen (LCol) and highly-crosslinked collagen (HCol). Using the generalized master plots method, random nucleation and nuclei growth model (An model) was found to be the most probable kinetic model for the pyrolysis process of LCol and HCol. The kinetic exponent for pseudocomponent pyrolysis varied between 3.00 and 3.90, and the pre-exponential factor ranged from 5.83 × 1012 to 2.93 × 1013 min-1. The results of the present study provide an alternative route and useful information for recycling and disposing of chrome-containing leather wastes.

Tuning Open Metal Site-Free ncb Type of Metal-Organic Frameworks for Simultaneously High Gravimetric and Volumetric Methane Storage Working Capacities.

The design and synthesis of a single metal-organic framework (MOF) material with simultaneously high gravimetric and volumetric methane storage working capacities are still a great challenge. The open metal site (OMS) in MOFs is generally regarded as an advantage to enhance host-guest affinity. However, it is detrimental to the methane storage working capacity to some extent due to the resulting high low-pressure uptake. Moreover, the reported methane storage MOFs are predominately focusing on edge-transitive or low-connected mixed-linker networks. In contrast, high-connected mixed-linker MOFs have been less investigated for methane storage. Herein, three isoreticular nine-connected trinuclear iron-based Fe-ncb-MOFs without OMSs have been judiciously designed and successfully constructed by means of the mixed-linker approach associated with the fixing amide-functionalized pyridyl-carboxylate ligand LP (4-(pyridin-4-ylcarbamoyl)benzoate) and three differing sized dicarboxylate ligands. High-pressure methane adsorption measurements show that, with the isoreticular extension from BDC (1,4-benzenedicarboxylate) to BPDC (4,4'-biphenyldicarboxylate) and ABDC (azobenzene-4,4'-dicarboxylate), three Fe-ncb-MOFs exhibit gradually increasing not only gravimetric but also volumetric storage capacities because of their balancing gravimetric surface area and volumetric surface area, hierarchical pore system, and modest CH4 heats of adsorption. Among them, the Fe-ncb-ABDC demonstrates a rare combination of simultaneously high gravimetric and volumetric CH4 storage working capacities of 0.302/0.37 g g-1 and 196/240 cm3 (STP) cm-3 at 298/273 K and between 80 and 5 bar, respectively, which outperform the 8-c Fe-8T18-ABDC assembled from a shorter pyridyl-carboxylate ligand IN (isonicotinate) and ABDC, due to its limited pore volume, the presence of OMSs, and more confined pore spaces, and place Fe-ncb-ABDC among the best performing MOFs.

Formation of a N/O/F-Rich and Rooflike Cluster-Based Highly Stable Cu(I/II)-MOF for Promising Pipeline Natural Gas Upgrading by the Recovery of Individual C3H8 and C2H6 Gases.

Due to the ultralow amounts of C3H8 and C2H6 gases, to design and synthesize water-stable MOFs that are promising for real-world efficient pipeline natural gas (NG) upgrading by the recovery of individual C3H8 and C2H6 gases is still a great challenge. Here, a N/O/F heteroatom-rich and rooflike [Cu(II)4Cu(I)2(COO)4(tetrazolyl)6] cluster-based ultra-microporous tsi-MOF (SNNU-Bai68) was afforded as a multiple heteroatom-rich and curved-surface-shaped cluster-based ultra-microporous MOF and the first porous MOF based upon such rooflike [Cu(II)xCu(I)y(tetrazolyl)z](2x+y-z)+ cluster. In SNNU-Bai68, the rooflike cluster was further assembled into a 1D chain secondary building block (SBB), which led to a high density of accessible potential adsorptive sites. Very interestingly, it exhibited the most promising balance of high gas adsorption uptakes at 0.01, 0.03, and 0.05 bar, high C3H8/CH4, C3H8/C2H6, and C2H6/CH4 adsorption selectivities, moderate adsorption enthalpies, and high water and chemical stability for pipeline natural gas upgrading by the recovery of individual C3H8 and C2H6 gases, which was further confirmed by the breakthrough experiments of the gas mixtures with/without 74% RH. Furthermore, the SC-XRD and GCMC studies revealed that the successful separation of C3H8, C2H6, and CH4 gases in SNNU-Bai68 is due to different synergistic effects of H-bonds between the frameworks at three adsorptive sites around each rooflike cluster and those different gas molecules, which were initially described systematically by the number of H atoms from the gas molecules, the total number of H-bonds within the synergistic H-bonds, and the binding energy of the framework at an adsorption site toward the gas molecules. In addition, this work may provide a method for the construction of a multiple heteroatom-rich and curved-surface-shaped cluster-based ultra-microporous MOF as a novel approach to build MOFs with polar pore surfaces, suitable pore sizes, and unique pore shapes to maximize the synergistic H-bonds between the framework and guests.

New Reticular Chemistry of the Rod Secondary Building Unit: Synthesis, Structure, and Natural Gas Storage of a Series of Three-Way Rod Amide-Functionalized Metal-Organic Frameworks.

Reticular chemistry and methane storage materials have been predominately focused on finite metal-cluster-based metal-organic frameworks (MOFs). In contrast, MOFs constructed from infinite rod secondary building units (SBUs), i.e., rod MOFs, are less developed, and the existing ones are typically built from simple one-way helical, zigzag, or (mixed)polyhedron SBUs. Herein, inspired by a recent unveiled structure of Zn6(H2O)3(BTP)4 and by means of an amide-functionalized preliminary single tricarboxylate, a subsequent mixed tricarboxylate, and dicarboxylate linkers, an intricate three-way rod MOF and the next three isoreticular three-way rod MOFs have been successfully realized, namely, 3W-ROD-1 and 3W-ROD-2-X (X = -OH, -F, and -CH3), respectively. The structural analyses disclosed that the four compounds were constructed from unprecedented three-way invariant nonintersecting trigonal rod-packing SBUs cross-linked via the noncovalent-interaction-driven self-assembly of pseudo hexacarboxylates with the original tricarboxylate or different functional ditopic linkers, resulting in cage-like pore geometries accessible via ultramicroporous apertures concomitant with the complex topology transitivity, namely, 18 42 and 18 44. Sorption studies show that the apparent surface areas of these materials are among the most highly porous materials for rod MOFs. Due to the presence of favorable pocket sites created by X, ketone, and proximal amide groups as revealed by Monte Carlo molecular dynamics (MCMD) computational calculations, the MOFs exhibit impressive methane storage working capacities, outperforming the well-known rod Ni-MOF-74 and representing the highest values among rigid rod MOFs.

Ligand-Conformer-Induced Formation of Zirconium-Organic Framework for Methane Storage and MTO Product Separation.

In pursuit of novel adsorbents with efficient adsorptive gas storage and separation capabilities remains highly desired and challenging. Although the documented zirconium-tricarboxylate-based metal-organic frameworks (MOFs) have displayed a variety of topologies encompassing underlying and geometry mismatch ones, the employed organic linkers are exclusively rigid and poorly presenting one type of conformation in the resultant structures. Herein, a used and semirigid tricarboxylate ligand of H3 TATAB was judiciously selected to isolate a zirconium-based spe-MOF after the preliminary discovery of srl-MOF. Single-crystal X-ray diffraction reveals that the fully deprotonated TATAB linker in spe-MOF exhibits two distinct conformers, concomitant with popular Oh and rare S6 symmetrical Zr6 molecular building blocks, generating an unprecedented (3,3,12,12)-c nondefault topology. Specifically, the spe-MOF exhibits structurally higher complexity, hierarchical micropores, open metal sites free and rich electronegative groups on the pore surfaces, leading to relatively high methane storage capacity without considering the missing-linker defects and efficient MTO product separation performance.

High-throughput determination of fungicides in grapes using thin-film microextraction coupled with liquid chromatography-tandem mass spectrometry.

A high-throughput and environmentally friendly method based on 96-well plate thin-film microextraction was established to determine 14 fungicides in grapes and grape juice using liquid chromatography-tandem mass spectrometry. The thin-film microextraction optimized method consisted of 60 min of extraction at pH 6.0 with the addition of sodium chloride (2-5%). Acetonitrile/water in the ratio of 8:2 was used for desorption analytes for 60 min. Evaluation of different extractive phases showed that polyacrylonitrile-polystyrene-divinylbenzene was the optimum coating. The linearity of the method was good in the range of 0.01-0.5 µg/mL for 14 fungicides with determination coefficients (R2 ) from 0.990 to 0.999, which indicated good linearity for both the grape juice and grape matrixes. The limit of detection was in the range of 0.002-0.01 µg/mL. The limit of quantitation was in the range of 0.01 mg/kg according to the minimum fortified level. The average absolute recoveries of the 14 fungicides ranged from 75.0 to 118.3%. The intraday relative standard deviation (n = 4) and interday relative standard deviation (n = 4) were 5.6-13.0% and 1.6-6.4%, respectively. This study showed that this method can be used for analyzing 96 samples in parallel, and the sample preparation time was approximately 2.0 min per sample. In addition, this approach offers a green and low-cost sample pretreatment technique for future analyses.

Effect of ß-endoxylanase and α-arabinofuranosidase enzymatic hydrolysis on nutritional and technological properties of wheat brans.

Wheat bran (WB) was treated using xylanase and arabinofuranosidase from Thermotoga maritima and added to steamed breads on 15% flour weight basis. The antioxidant capacity and water and oil retention capacity of brans were increased while their soluble xylooligosaccharides and phenolic acids content were increased. Two enzymes treatment was found to be more effective in decreasing the resistance to extension, softening degree, water absorption and development time, and in increasing the extensibility, stability time, porosity and sensorial characteristics of the steamed breads. Two enzymes treatment had significantly (P < 0.05) greater specific volume, springiness and cohesiveness and lower crumb firmness, gumminess, chewiness than single enzyme treatment. All results highlighted that combination of xylanase and arabinofuranosidase can improve the degrees hydrolysis of WB and its soluble AX xylooligosaccharides produced, having a synergetic effect on the dough rheology and nutritional and quality characteristics of steamed bread.

Syntheses, Structures and Sorption Properties of Three Isoreticular Trinuclear Indium-Based Amide-Functionalized Metal-Organic Frameworks.

Amide-functionalized metal-organic frameworks (AFMOFs) as a subclass of MOF materials have received great interest recently because of their intriguing structures and diverse potential applications. In this work, solvothermal reactions between indium nitrate and two mixed-linkers afforded two new isoreticular 8-connected trinuclear indium-based AFMOFs of [(In3 O)(OH)(L2)2 (IN)2 ]⋅(solv)x (2-In) and [(In3 O)(OH)(L2)2 (AIN)2 ]⋅(solv)x (NH2 -2-In) (H2 L2=4,4'-(carbonylimino)dibenzoic acid and HIN=isonicotinic acid or HAIN=3-aminoisonicotinic acid), respectively. Moreover, by means of reticular chemistry, an extended network of [(In3 O)(OH)(L3)2 (PB)2 ]⋅(solv)x (3-In) (H2 L3=4,4'-(terephthaloylbis(azanediyl))dibenzoic acid, HPB=4-(4-pyridyl)benzoic acid) was also successfully realized after prolongation of the former dicarboxylate linker and HIN, resulting in a truly 8-connected isoreticular AFMOF platform. These frameworks were structurally determined by single-crystal X-ray diffraction (SCXRD). Sorption studies further demonstrate that 2-In and NH2 -2-In exhibit not only high surface areas and pore volumes but also relatively high carbon capture capabilities (the CO2 uptakes reach 60.0 and 75.5 cm3 g-1 at 298 K and 760 torr, respectively) due to the presences of amide and/or amine functional groups. The selectivity of CO2 /N2 and CO2 /CH4 calculated by IAST are 10.18 and 12.43, 4.20 and 4.23 for 2-In and NH2 -2-In, respectively, which were additionally evaluated by mixed-gases dynamic breakthrough experiments. In addition, high-pressure gas sorption measurements show that both materials could take up moderate amounts of natural gas.

Expression, purification, crystallization and preliminary X-ray diffraction analysis of swine leukocyte antigen 2 complexed with a CTL epitope AS64 derived from Asia1 serotype of foot-and-mouth disease virus.

BACKGROUND: Currently, the structural characteristics of the swine major histocompatibility complex (MHC) class I molecule, also named swine leukocyte antigen class I (SLA-I) molecule need to be further clarified. RESULTS: A complex of SLA-I constituted by an SLA-2*HB01 molecule with swine ß2-microglobulin and a cytotoxic T lymphocyte (CTL) epitope FMDV-AS64 (ALLRSATYY) derived from VP1 protein (residues 64-72) of Asia 1 serotype of foot-and-mouth disease virus (FMDV) was expressed, refolded, purified and crystallized. By preliminary X-ray diffraction analysis, it was shown that the diffraction resolution of the crystal was 2.4 Å and the space group belonged to P212121 with unit cell parameters a = 48.37, b = 97.75, c = 166.163 Å. CONCLUSION: This research will be in favor of illuminating the structural characteristics of an SLA-2 molecule associated with a CTL epitope derived from Asia1 serotype of FMDV.

Purification, crystallization and preliminary X-ray crystallographic studies of swine MHC class I complexed with an FMDV CTL epitope Hu64.

Up to now, no crystal structure of swine leukocyte antigen 2 (SLA-2) molecules was reported. In order to elucidate the structure of SLA-2 and to study the cytotoxic T lymphocyte (CTL) epitopes derived from foot-and-mouth disease virus (FMDV), a complex of swine major histocompatibility complex (MHC) class I molecule (SLA-2 haplotype, Hebao allele) with swine ß2-microglobulin and the CTL epitope FMDV-Hu64 (ALLRTATYY) derived from O serotype of FMDV VP1 protein (residues 64-72) was refolded and crystallized. The crystal, which belonged to space group P212121, diffracted to 2.5 Šresolution and had unit cell parameters a = 48.37, b = 97.75, c = 166.163 Å. These results will help to determine the first structure of a SLA-2 molecule in the context of an FMDV CTL epitope.

Identification of two novel foot-and-mouth disease virus cytotoxic T lymphocyte epitopes that can bind six SLA-I proteins.

Currently available vaccines from inactivated foot-and-mouth disease virus (FMDV) only protect animals by inducing neutralizing antibodies. A vaccine that contains cytotoxic T lymphocytes (CTL) epitopes to induce strong CTL responses might protect animals more effectively. Herein, we used swine leukocyte antigen class I (SLAI) proteins derived from six different strains of domestic pigs to screen and identify shared FMDV CTL epitopes. Four potential FMDV CTL epitopes (Q01, Q02, AS3, and QA4) were confirmed by mass spectrometry. We also determined the antigenicity of these epitopes to elicit cell-mediated immunoresponse by the ELISPOT and CTL assays. Among the four peptides, Q01 and QA4 were found to bind all six SLA-I proteins with strong affinity and elicit significant activity of CTL (P < 0.01). We conclude that Q01 and QA4 peptides are novel shared epitopes that can be recognized by all six SLA-I molecules on representative CTLs.