[Design and development of a multifunctional moxibustion treatment machine based on heat-sensitive moxibustion therapy].

A multifunctional moxibustion treatment machine is designed and developed to assist the heat-sensitive moxibustion therapy. Through the motion control of the stepping motor by programmable logic controller (PLC), the automatic control is obtained for the acupoint detection of heat-sensitive moxibustion therapy and the manual operation of moxibustion. The skin temperature is monitored in real-time, using infrared non-contact temperature measurement technology. Based on the deviation of the temperature set value and the monitoring one, the distance between the moxibustion device and the exerted region is adjusted automatically by PLC so that the temperature is controlled practically. The multifunctional moxibustion treatment machine based on the heat-sensitive moxibustion therapy is capable of the operation control of mild moxibustion, circling moxibustion, sparrow-pecking moxibustion and along-meridian moxibustion techniques, as well as real-time monitoring of skin temperature. The temperature change curve of this machine is coincident with that obtained by the manual operation of heat-sensitive moxibustion. This multifunctional moxibustion treatment machine assists the delivery of heat-sensitive moxibustion therapy and it is satisfactory in temperature control and precise in operation.

[Analysis of the Spatial Changes in Bacterial Communities in Urban Reclaimed Water Channel Sediments: A Case Study of the North Canal River].

Sediment bacteria have attracted much attention because of their important roles in energy flow and pollutant cycle transformation. The changes in the spatial distribution pattern of bacteria are the basis for research on the biodiversity generation and maintenance mechanisms. However, there are few studies on the spatial variation in benthic microorganisms and its biogeographic models. The highly artificial North Canal River across the Beijing-Tianjin-Hebei area was chosen as the research area in this study. The spatial variation in the different classification levels of the Kingdom, Phylum, Class, Order, Family, Genus, Species, and operational taxonomic units and their diversity formation mechanisms were analyzed. The results showed that the samples at different classification levels had a more homogeneous distribution pattern. There were clearer distribution boundaries at the low classification levels than at the high classification levels. The significance of the bacterial community variation increased as the classification level of the bacterial community decreased. Furthermore, the difference between groups increased and the similarities within groups decreased as the classification level of the bacterial community decreased. The typical rhizosphere microorganisms represented by Frankiales and Rhodobacterales showed significant enrichment in the upstream samples, followed by the midstream samples and a significant decrease in the downstream samples. Microorganisms related to the carbon, nitrogen, and sulfur cycles represented by Anaerolineales and Desulfobacterales showed significant enrichment in the midstream, followed by the downstream and a significant reduction in the upstream. The genus Phenylobacterium was significantly enriched in the upstream followed by the midstream, and was significantly reduced in the downstream. The pathogenic bacteria represented by Clostridium_gasigenes and Moraxella_osloensis showed a significant enrichment pattern in the midstream. The contents of Ca2+, SO42-, and total organic carbon (TOC) in the downstream samples were significantly higher than those in the upstream and midstream samples. The discharge of untreated wastewater downstream increased the salt and TOC contents in the sediment. The ecological restoration project in the sediment of the riparian zone decreased the salt and TOC contents in the upstream and midstream samples. Environmental selection was the main driving factor of the pattern of spatial variation in the bacterial communities in the sediments of the North Canal River.

Speckle-tracking imaging to monitor myocardial function after coronary artery bypass graft surgery.

OBJECTIVES: The purpose of this study was to investigate the changes in myocardial function in patients after coronary artery bypass graft (CABG) surgery using longitudinal and circumferential strain on speckle-tracking imaging. METHODS: A total of 145 patients who successfully underwent CABG surgery with a left ventricular ejection fraction (LVEF) of 50% or greater were enrolled in this study. Patients were classified into 4 groups based on age: group 1 (33-59 years), group 2 (60-64 years), group 3 (65-69 years), and group 4 (70-79 years). Routine echocardiography and longitudinal and circumferential strain measurements on speckle-tracking imaging were performed 1 week before and 1, 3, and 6 months after the CABG. RESULTS: In all groups, longitudinal strain increased significantly at 3 and 6 months after CABG therapy compared to baseline (P < .05). A significant increase in circumferential strain was found 1 month after the CABG in groups 1, 2, and 3, and a continuous increase in the parameter was observed in all groups 3 months after therapy (P < .05). However, the LVEF, left ventricular end-diastolic dimension, and stroke volume measured by routine echocardiography were not significantly changed after successful CABG treatment in all groups during 6 months of follow-up. CONCLUSIONS: Based on the results of our study in all age groups, speckle-tracking imaging parameters are more effective than the LVEF, left ventricular end-diastolic dimension, and stroke volume for monitoring improvement in myocardial function after CABG surgery.

Enhanced Hydrogen Storage Kinetics of Nanocrystalline and Amorphous Mg2Ni-type Alloy by Melt Spinning.

Mg2Ni-type Mg2Ni1-xCox (x = 0, 0.1, 0.2, 0.3, 0.4) alloys were fabricated by melt spinning technique. The structures of the as-spun alloys were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The hydrogen absorption and desorption kinetics of the alloys were measured by an automatically controlled Sieverts apparatus. The electrochemical hydrogen storage kinetics of the as-spun alloys was tested by an automatic galvanostatic system. The results show that the as-spun (x = 0.1) alloy exhibits a typical nanocrystalline structure, while the as-spun (x = 0.4) alloy displays a nanocrystalline and amorphous structure, confirming that the substitution of Co for Ni notably intensifies the glass forming ability of the Mg2Ni-type alloy. The melt spinning treatment notably improves the hydriding and dehydriding kinetics as well as the high rate discharge ability (HRD) of the alloys. With an increase in the spinning rate from 0 (as-cast is defined as spinning rate of 0 m/s) to 30 m/s, the hydrogen absorption saturation ratio () of the (x = 0.4) alloy increases from 77.1 to 93.5%, the hydrogen desorption ratio () from 54.5 to 70.2%, the hydrogen diffusion coefficient (D) from 0.75 × 10-11 to 3.88 × 10-11 cm²/s and the limiting current density IL from 150.9 to 887.4 mA/g.