Identification of biological significance of different stages of varicose vein development based on mRNA sequencing.

Normal veins could develop to varicose vein (VV) by some risk factors, and might further progress to shallow vein thrombosis (SVT). However, the molecular mechanism of key genes associated with the progression and regression of VV are still not thorough enough. In this study, the healthy control (HC), VV, and SVT vascular samples were collected for transcriptome sequencing. The differentially expressed genes (DEGs) were screened by "DESeq2", including DEGs1 (HC vs. VV), DEGs2 (HC vs. SVT) and DEGs3 (VV vs. SVT). And their functional enrichment analyses were conducted by "ClusterProfiler". The receiver operating characteristic (ROC) curve was used to obtain the key genes (KGs) of the pathogenesis of VV and SVT. The qRT-PCR assay was performed to validate the expressions of KGs. Immune cell infiltration analyses were conducted based on ssGSEA method. The competitive endogenous RNAs (ceRNAs) regulatory network was constructed. The target drugs of KGs were predicted using DrugBank database. The biofunctions of DACT3 were further investigated through a series of experiments in vitro. All of these DEGs were associated with inflammation and immunity related functions. Immune cell infiltration was significantly different between VV and SVT. Six key genes including PLP2, DACT3, LRRC25, PILRA, MSX1 and APOD that were associated with the progression and regression of VV were screened. The expression of LRRC25 and PILRA was significantly negatively associated with central memory T cell, and significantly positively associated with B cell. Besides, XIST was the critical regulator of multiple KGs. Cimetidine was potential drug for VV and SVT therapy. Overexpression of DACT3 significantly inhibited the proliferation and migration of vascular smooth muscle cells (VSMCs), and affected their cell cycle and phenotypic transition. This study identified six key genes associated with the progression and regression of VV. Among them, DACT3 was proved to hinder VV progression. These findings may help to deepen understanding its underlying mechanisms.

Preparation Method and Application of Porous Poly(lactic acid) Membranes: A Review.

Porous membrane technology has garnered significant attention in the fields of separation and biology due to its remarkable contributions to green chemistry and sustainable development. The porous membranes fabricated from polylactic acid (PLA) possess numerous advantages, including a low relative density, a high specific surface area, biodegradability, and excellent biocompatibility. As a result, they exhibit promising prospects for various applications, such as oil-water separation, tissue engineering, and drug release. This paper provides an overview of recent research advancements in the fabrication of PLA membranes using electrospinning, the breath-figure method, and the phase separation method. Firstly, the principles of each method are elucidated from the perspective of pore formation. The correlation between the relevant parameters and pore structure is discussed and summarized, subsequently followed by a comparative analysis of the advantages and limitations of each method. Subsequently, this article presents the diverse applications of porous PLA membranes in tissue engineering, oil-water separation, and other fields. The current challenges faced by these membranes, however, encompass inadequate mechanical strength, limited production efficiency, and the complexity of pore structure control. Suggestions for enhancement, as well as future prospects, are provided accordingly.

Controllable Synthesis of Cadmium-Free Blue-Emitting Cu-Ga-Zn-S-Based Nanocrystals for Solution-Processed Quantum-Dot Light-Emitting Diodes.

The utility of semiconductor nanocrystals (NCs) in light-emitting diodes (LED) has shown great potential in the field of display, whereas the challenge remains in developing efficient and stable cadmium-free blue-emitting LED devices due to the poor photophysical properties of blue-emitting NCs. Herein, we develop a controllable synthesis of Cu-Ga-Zn-S (CGZS) semiconductor NCs that show blue light emission with a relative photoluminescence quantum yield exceeding 90%. Furthermore, we have successfully fabricated a solution-processed quantum-dot LED (QLED) using CGZS NCs, achieving a notable maximum external quantum efficiency (EQE) of 1.00% at a luminance of 100 cd/m2. Our work lays a foundational framework for advancing cadmium-free blue-emitting QLEDs and facilitates the development of quantum dot electroluminescent panchromatic displays.

One-Pot Synthesis of Color-Tunable Narrow-Bandwidth Ag-In-Ga-Zn-S Semiconductor Nanocrystals for Quantum-Dot Light-Emitting Diodes.

I-III-VI type semiconductor nanocrystals (NCs) have attracted considerable attention due to their environmental friendly nature and large-scale tunable emission. Herein, we report the successful synthesis of full-spectrum (470 to 614 nm) Ag-In-Ga-Zn-S (AIGZS) NCs by precisely regulating the In/Ga ratios using a facile one-pot method. Intriguingly, the photoluminescence (PL) peak width exhibits a continuous narrowing trend with extended reaction time, ultimately reaching a full width at half-maximum (fwhm) of 34 nm for green AIGZS NCs. Furthermore, the exciton relaxation dynamics of AIGZS NCs were systematically investigated using time-resolved photoluminescence and femtosecond transient absorption spectroscopy. Remarkably, we successfully fabricated blue, green, and red quantum-dot light-emitting diodes (QLEDs), forecasting the potential of AIGZS NCs with high color purity for applications in full-spectrum QLEDs.

Highly Efficient Flexible Photodetectors Based on Pb-Free CsBi3I10 Perovskites.

Perovskites have made remarkable advancements in optoelectronics owing to their high light absorption coefficient, tunable bandgap, and long charge diffusion. Nonetheless, the practical applications of Pb-based perovskites have been hindered by the instability and toxicity of Pb, especially in flexible electronics, which require high biosecurity and low toxicity. Hence, the development of stable Pb-free perovskite materials has gained increasing attention. In this study, we synthesized stable CsBi3I10 Pb-free perovskites outside the glovebox and improved the optoelectronic and mechanical performances of the CsBi3I10-based flexible devices through polyvinylcarbazole (PVK) doping. Flexible photodetectors with the device structure of PET/ITO/PEDOT:PSS/CsBi3I10:PVK/Au was fabricated. The results indicated that the introduction of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) reduced the surface roughness of the flexible PET substrate, while PVK doping further improved the surface smoothness of CsBi3I10 thin films, thereby enhancing the interfacial charge transportation. Moreover, PEDOT:PSS and PVK acted as stepwise hole transport layers in the photodetectors. The device demonstrated a maximum responsivity of 0.3 A/W, detectivity of 2.6 × 1011 Jones, and a response time of 102 µs at 650 nm. After subjecting it to 1000 bending tests, the light current retained 80% of its initial value. This study presents a universally applicable method for controlling the surface morphology of a flexible perovskite thin film.

Enhanced performance of quantum dot light-emitting diodes enabled by zirconium doped SnO2 as electron transport layers.

Next-generation display and lighting based on quantum dot light-emitting diodes (QLEDs) require a balanced electron injection of electron transport layers (ETLs). However, classical ZnO nanoparticles (NPs) as ETLs face inherent defects such as excessive electron injection and positive aging effects, urgently requiring the development of new types of ETL materials. Here, we show that high stability SnO2 NPs as ETL can significantly improve the QLED performance to 100567 cd·m-2 luminance, 14.3% maximum external quantum efficiency, and 13.1 cd·A-1 maximum current efficiency using traditional device structures after optimizing the film thickness and annealing the temperature. Furthermore, experimental tests reveal that by doping Zr4+ ions, the size of SnO2 NPs will reduce, dispersion will improve, and energy level will shift up. As expected, when using Zr-SnO2 NPs as the ETL, the maximum external quantum efficiency can reach 16.6%, which is close to the state-of-the-art QLEDs based on ZnO ETL. This work opens the door for developing novel, to the best of our knowledge, type ETLs for QLEDs.

Solvent-modulated luminescence of carbon dots for ion sensing and fingerprint detection.

Since carbon dots (CDs) with good water solubility are preferred by researchers and biological applications, a hydrothermal method was used to synthesize green fluorescent CDs with an excitation-independent peak at 526 nm using deionized water as the solvent and neutral red as the carbon source. To achieve spectral modulation, the pH of the solvent was adjusted with KOH to obtain orange CDs (O-CDs) in an alkaline environment, with the emission peak red-shifted to 630 nm. The water-soluble CDs were prepared for multidimension sensing as Fe3+ sensing (on/off). Carbon dots dispersed into a silica gel matrix can be used for fingerprint detection of various materials.

Boosting Cu─In─Zn─S-based Quantum-Dot Light-Emitting Diodes Enabled by Engineering Cu─NiOx /PEDOT:PSS Bilayered Hole-Injection Layer.

The imbalance of charge injection is considered to be a major factor that limits the device performance of cadmium-free quantum-dot light-emitting diodes (QLEDs). In this work, high-performance cadmium-free Cu─In─Zn─S(CIZS)-based QLEDs are designed and fabricated through tailoring interfacial energy level alignment and improving the balance of charge injection. This is achieved by introducing a bilayered hole-injection layer (HIL) of Cu-doped NiOx (Cu─NiOx )/Poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT:PSS). High-quality Cu─NiOx film is prepared through a novel and straightforward sol-gel procedure. Multiple experimental characterizations and theoretical calculations show that the incorporation of Cu2+ ions can regulate the energy level structure of NiOx and enhance the hole mobility. The state-of-art CIZS-based QLEDs with Cu─NiOx /PEDOT:PSS bilayered HIL exhibit the maximum external quantum efficiency of 6.04% and half-life time of 48 min, which is 1.3 times and four times of the device with only PEDOT:PSS HIL. The work provides a new pathway for developing high-performance cadmium-free QLEDs.

The Structural Evolution of ß-to-α Phase Transition in the Annealing Process of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate).

In this study, the structural and property changes induced in the highly ordered structure of preoriented poly(3-hydroxybutyrate-co-3-hydroxyvalerate) PHBV films containing the ß-form during annealing were investigated. The transformation of the ß-form was investigated by means of in situ wide-angle X-ray diffraction (WAXD) using synchrotron X-rays. The comparison of PHBV films with the ß-form before and after annealing was performed using small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The evolution mechanism of ß-crystal transformation was elucidated. It was revealed that most of the highly oriented ß-form directly transforms into the highly oriented α-form, and there might be two kinds of transformations: (1) The ß-crystalline bundles may be transformed one by one rather than one part by one part during annealing before a certain annealing time. (2) The ß-crystalline bundles crack or the molecular chains of the ß-form are separated from the lateral side after annealing after a certain annealing time. A model to describe the microstructural evolution of the ordered structure during annealing was established based on the results obtained.

Bifurcations of a prey-predator system with fear, refuge and additional food.

In the predator-prey system, predators can affect the prey population by direct killing and inducing predation fear, which ultimately force preys to adopt some anti-predator strategies. Therefore, it proposes a predator-prey model with anti-predation sensitivity induced by fear and Holling-Ⅱ functional response in the present paper. Through investigating the system dynamics of the model, we are interested in finding how the refuge and additional food supplement impact the system stability. With the changes of the anti-predation sensitivity (the refuge and additional food), the main result shows that the stability of the system will change accordingly, and it has accompanied with periodic fluctuations. Intuitively the bubble, bistability phenomena and bifurcations are found through numerical simulations. The bifurcation thresholds of crucial parameters are also established by the Matcont software. Finally, we analyze the positive and negative impacts of these control strategies on the system stability and give some suggestions to the maintaining of ecological balance, we perform extensive numerical simulations to illustrate our analytical findings.