Specific reference interval for high-sensitivity cardiac troponin I among healthy children in Wuhan, China.

Background: Troponin (Tn) is of an important biomarker for the diagnosis and prognosis of myocardial injury and for evaluating the severity of cardiac involvement due to other systemic diseases in children. Unfortunately, high-sensitivity cardiac troponin I (hs-cTnI) specific reference intervals (RIs) are extremely limited. This study aimed to establish a preliminary pediatric hs-cTnI RI for newborns, children, and adolescents in Wuhan, China. Methods: A total of 1,355 healthy participants (1 day to 19 years) were recruited from a cross-sectional study implemented in Wuhan Children's Hospital from September 2022 to August 2023. Serum hs-cTnI levels were detected via the Mindray automated chemiluminescence immunoassay analyzer (CL-6000i). Specific serum hs-cTnI RIs were established according to the Clinical and Laboratory Standards Institute (CLSI) guidelines. The RIs were defined by the nonparametric median (P50), and 2.5th, 97.5th [P50 (P2.5-P97.5)] intervals. Results: Of the 1,355 pediatric participants, serum hs-cTnI concentrations of 1,332 children were measured. The serum overall P50 and 95% interval range (P2.5-P97.5) of serum hs-cTnI was 0.41 (0.00, 44.31) ng/L. This was higher in males of 0.47 (0.00, 44.90) ng/L than in females of 0.36 (0.00, 44.17) ng/L (P<0.01). Age- and sex-specific differences in hs-cTnI levels were observed. The levels were highly variable in children under 1 year of age (especially in newborns), deriving a P50 (P2.5-P97.5) of 22.06 (1.04, 154.22) ng/L, and gradually narrowed and decreased with increasing age, with a markedly lower established P50 (P2.5-P97.5) of 0.36 (0.00, 2.16) ng/L. However, the levels began to increase slightly at the age of 9-12 years and reached a small peak at the age range of 15 to 18 years in males with 0.71 (0.03, 3.29) ng/L, while females were less affected by puberty. Sex- and age-specific RIs for hs-cTnI were established: 5 age-specific RIs in males, 1 day-1 month: 30.16 (8.67, 171.81) ng/L; >1-12 months: 13.20 (0.63, 61.91) ng/L; >1-15 years: 0.36 (0.00, 1.86) ng/L; >15-18 years: 0.71 (0.03, 3.29) ng/L; >18-19 years: 0.52 (0.00, 1.92) ng/L; and 4 age-specific RIs in females, 1 day-1 month: 43.93 (18.82, 146.38) ng/L; >1-12 months: 5.22 (0.92, 42.54) ng/L; >1-6 years: 0.54 (0.00, 2.74) ng/L; >6-19 years: 0.23 (0.00, 1.56) ng/L. Conclusions: This study preliminarily established age- and sex-specific serum hs-cTnI RIs using the Mindray CL-6000i system in healthy children in Wuhan, China.

High-Temperature-Resistant Profile Control System Formed by Hydrolyzed Polyacrylamide and Water-Soluble Phenol-Formaldehyde Resin.

To realize the effective profile control of a heavy oil reservoir, hydrolyzed polyacrylamide (HPAM) and water-soluble phenol-formaldehyde resin (PR) were chosen to prepare the profile control system, which gelled at medium or low temperatures and existed stably at high temperatures in the meantime. The effects of phenolic ratios, PR concentration, and HPAM concentration on the formation and strength of the gels were systematically studied by the gel-strength code method and rheological measurements. And the microstructure of the gels was investigated by scanning electron microscope measurements. The results showed that the gelling time of the HPAM-PR system was 13 h at 70 °C. The formed gel could stay stable for 90 days at 140 °C. In addition, the gels showed viscoelastic properties, and the viscosity reached 18,000 mPa·s under a 1.5 s-1 shearing rate due to their three-dimensional cellular network structure. The formation of the gels was attributable to the hydroxyl groups of the PR crosslinking agent, which could undergo the dehydration condensation reaction with amide groups under non-acidic conditions and form intermolecular crosslinking with HPAM molecules. And the organic crosslinker gel system could maintain stability at higher temperatures because covalent bonds formed between molecules.

An ultrasensitive solid-state electrochemiluminescence sensor based on Ni-MOF@Ru(bpy)32+ and Au NPs@TiO2 for determination of permethrin.

The novel TiO2 and Ni-MOF materials were synthesized and utilized for the detection of permethrin (PET). A highly sensitive solid-state electrochemiluminescence (ECL) sensor was developed based on Ni-MOF@Ru(bpy)32+ and Au NPs@TiO2. In this sensing platform, Ru(bpy)32+-Tripropyl Amine (TPrA) was used as a luminescent signal, Ni-MOF acted as a carrier to carry more luminescent reagents Ru(bpy)32+. Au NPs acted as promoters facilitated electron transport and TiO2 could further enhance the luminescence intensity of the system by synergistical interaction with Au NPs. The possible mechanisms of signal amplification were investigated. The ECL intensity decreased significantly with increasing PET concentration, enabling the determination of PET amount through the observation of the change in ECL signal intensity (ΔI). Under optimal experimental conditions, the linear range of PET concentration from 1.0 × 10-11 mol L-1 to 1.0 × 10-6 mol L-1, with a detection limit of 3.3 × 10-12 mol L-1 (3S/N). This method was successfully applied to determine PET in various vegetable samples.

Synthesis, Structure and Antibacterial Activity of Two Novel Coordination Polymers Based on N,N'-bis(4-carbozvlbenzvl)-4-aminotoluene and Heterocyclic Ligand against S. aureus.

As the use of antibiotics increases, the increasing resistance of bacteria is the main reason for the reduced efficiency of antibacterial drugs, making the research of new antibacterial materials become new hot spot. In this article, two novel coordination polymers (CPs), namely, [Cd2(L)2(bibp)2]n (1) and [Ni(L)(bib)]n (2), where H2L = N,N'-bis(4-carbozvlbenzvl)-4-aminotoluene, bibp = 4,4'-bis(imidazol-1-yl)biphenyl, and bib = 1,3-bis(1-imidazoly)benzene, have been synthesized under solvothermal and hydrothermal condition. Structural clarification was performed through infrared spectrum and single-crystal X-ray diffraction analysis, while thermal analysis and XRD technology were used for the performance assessment of compounds 1 and 2. In addition, antibacterial performance experiments showed that compounds 1 and 2 have certain selectivity in their antibacterial properties and have good antibacterial properties against S. aureus. As the concentration of the compound increases, the inhibitory effect gradually strengthens, and when the concentration of the compound reaches 500 µg/mL and 400 µg/mL, the concentration of the S. aureus solution no longer increases and has been completely inhibited.

Developmental pleiotropy of SDP1 from seedling to mature stages in B. napus.

Rapeseed, an important oil crop, relies on robust seedling emergence for optimal yields. Seedling emergence in the field is vulnerable to various factors, among which inadequate self-supply of energy is crucial to limiting seedling growth in early stage. SUGAR-DEPENDENT1 (SDP1) initiates triacylglycerol (TAG) degradation, yet its detailed function has not been determined in B. napus. Here, we focused on the effects of plant growth during whole growth stages and energy mobilization during seedling establishment by mutation in BnSDP1. Protein sequence alignment and haplotypic analysis revealed the conservation of SDP1 among species, with a favorable haplotype enhancing oil content. Investigation of agronomic traits indicated bnsdp1 had a minor impact on vegetative growth and no obvious developmental defects when compared with wild type (WT) across growth stages. The seed oil content was improved by 2.0-2.37% in bnsdp1 lines, with slight reductions in silique length and seed number per silique. Furthermore, bnsdp1 resulted in lower seedling emergence, characterized by a shrunken hypocotyl and poor photosynthetic capacity in the early stages. Additionally, impaired seedling growth, especially in yellow seedlings, was not fully rescued in medium supplemented with exogenous sucrose. The limited lipid turnover in bnsdp1 was accompanied by induced amino acid degradation and PPDK-dependent gluconeogenesis pathway. Analysis of the metabolites in cotyledons revealed active amino acid metabolism and suppressed lipid degradation, consistent with the RNA-seq results. Finally, we proposed strategies for applying BnSDP1 in molecular breeding. Our study provides theoretical guidance for understanding trade-off between oil accumulation and seedling energy mobilization in B. napus.

Turbulence-resistant free space optical communication via chaotic block-matching and 3D filtering.

In this paper, we propose a chaotic block-matching and three-dimensional (C-BM3D) filtering algorithm to remove the noise and enhance the security in the turbulent channel of free space optical (FSO) communication. We experimentally demonstrate the performance of C-BM3D by comparing it with chaotic non-local means filtering (C-NLM), chaotic Gaussian filtering and chaotic Median filtering based on Log-normal and Gamma-Gamma turbulence models. The results show that the peak signal-to-noise ratios (PSNRs) of C-BM3D in the weak turbulence under Log-normal and Gamma-Gamma models are up to 96.2956 and 93.2853, respectively. The C-BM3D also achieves superior image similarity in Log-normal turbulent channel, with its structural similarity index measures (SSIMs) nearly equal to 1. Additionally, the signal-to-noise ratio (SNR) of C-BM3D ranks the highest, and its bit error rate (BER) improves by at least 15 dB compared to that of the other three algorithms. The experimental results indicate that the C-BM3D can be a good candidate for the next generation of FSO communication in security and turbulence resistance.

A SE-DenseNet-LSTM model for locomotion mode recognition in lower limb exoskeleton.

Locomotion mode recognition in humans is fundamental for flexible control in wearable-powered exoskeleton robots. This article proposes a hybrid model that combines a dense convolutional network (DenseNet) and long short-term memory (LSTM) with a channel attention mechanism (SENet) for locomotion mode recognition. DenseNet can automatically extract deep-level features from data, while LSTM effectively captures long-dependent information in time series. To evaluate the validity of the hybrid model, inertial measurement units (IMUs) and pressure sensors were used to obtain motion data from 15 subjects. Five locomotion modes were tested for the hybrid model, such as level ground walking, stair ascending, stair descending, ramp ascending, and ramp descending. Furthermore, the data features of the ramp were inconspicuous, leading to large recognition errors. To address this challenge, the SENet module was incorporated, which improved recognition rates to some extent. The proposed model automatically extracted the features and achieved an average recognition rate of 97.93%. Compared with known algorithms, the proposed model has substantial recognition results and robustness. This work holds promising potential for applications such as limb support and weight bearing.

Functional genomics of Brassica napus: Progresses, challenges, and perspectives.

Brassica napus, commonly known as rapeseed or canola, is a major oil crop contributing over 13% to the stable supply of edible vegetable oil worldwide. Identification and understanding the gene functions in the B. napus genome is crucial for genomic breeding. A group of genes controlling agronomic traits have been successfully cloned through functional genomics studies in B. napus. In this review, we present an overview of the progress made in the functional genomics of B. napus, including the availability of germplasm resources, omics databases and cloned functional genes. Based on the current progress, we also highlight the main challenges and perspectives in this field. The advances in the functional genomics of B. napus contribute to a better understanding of the genetic basis underlying the complex agronomic traits in B. napus and will expedite the breeding of high quality, high resistance and high yield in B. napus varieties.

Electrochemiluminescent assay based on Co-MOF and TiO2 for determination of bisphenol A.

An electrochemiluminescence (ECL) sensor for determining bisphenol A (BPA) was prepared based on titanium dioxide (TiO2) and Co-MOF. TiO2 is a co-reaction promoter that amplifies the ECL signal in the Ru(bpy)32+-trinpropylamine (TPrA) system. When the electrode is modified with Co-MOF the ECL signal is significantly enhanced. This is because Co-MOF can not only be used as a co-reaction accelerator but also as a carrier to adsorb more luminescent substances. Possible mechanisms for amplifying the original signal through the synergistic action of the two substances are investigated. The ECL strength decreases with increasing concentrations of BPA, and the amount of BPA can be determined by the change in ECL signal strength (ΔI). Under optimal experimental conditions, the linear range of BPA was 2.0 × 10-10 to 2.0 × 10-5 M, with a determination limit of 6.7 × 10-11 M (3σ/m). The relative standard deviation (RSD) of the signal for ten consecutive measurements was 1.5%. The sensor can be used to detect BPA in bottled samples with recoveries of 96 to 105%.

Two-stage look-up-table-based 16QAM vector millimeter-wave signal generation and reception.

We propose a two-stage look-up table (LUT) scheme for a photonic 16 quadrature-amplitude-modulation (QAM) millimeter-wave (MMW) communication system. The first-stage LUT is used at the transmitter, which can eliminate complex computational processes and adaptively adjust the precoded amplitude values to achieve optimal performance without being affected by half-wave voltage variations. We have completed a signal transmission below the hard-decision forward error correction (HD-FEC) threshold of 3.8 × 10-3 at the baud rate of 2/4 GBaud for weak turbulence and 2 GBaud for medium turbulence free-space optics (FSO) channel transmission. The second-stage LUT is used for post-compensation at the receiver as a nonlinear scheme that records the average pattern-related distortion of the channel and mitigates transmission impairment through nonlinear post-compensation. With the help of the second-stage LUT, the sensitivity of the optical receiver is improved by 0.15 dB at a baud rate of 2 GBaud for medium turbulence FSO channel transmission. As the baud rate increases to 4 GBaud, the system's bit error ratio (BER) can reach the soft-decision forward error correction (SD-FEC) threshold of 4.2 × 10-2 only after applying the second-stage LUT.

Construction of Prognostic Model and miRNA-mRNA Regulatory Network for Lung Squamous Cell Carcinoma.

The purpose of this paper was to construct a prognostic model, miRNA-mRNA regulatory network and protein-protein interaction (PPI) network for lung squamous cell carcinoma (LUSC) used data from the cancer genome atlas (TCGA) database. In this study, we first downloaded and sorted out the expression matrix containing 19962 mRNA transcripts (including 502 LUSC and 51 normal control (NC) samples) and the expression matrix containing 2205 miRNA transcripts (including 478 LUSC and 45 NC samples) from the TCGA database. We obtained 389 differentially expressed miRNAs (DE-miRNAs), of which 305 were upregulated and 84 down-regulated DE-miRNAs. Next, a total of 7 prognosis-related DE-miRNAs (PDE-miRNAs) were identified by Cox regression analysis, and the prognosis model consisting of three PDE-miRNAs (hsa-miR-4746-5p, hsa-miR-556-3p and hsa-miR-489-3p) was optimized. Then, we drew the survival curves and found that the survival rates of the three PDE-miRNA high and low expression groups and the survival rates of the high-risk and low-risk patients in the prognosis model had significant statistical differences. In addition, the receiver operating characteristics (ROC) curve analysis and independent prognostic analysis confirmed that the prognostic model we built has a relatively accurate ability to predict the grouping and prognosis of LUSC patients. Finally, Cox regression analysis were used to construct the miRNA-mRNA regulatory network, which showed the regulatory relationship between PDE-miRNAs and targeted mRNAs. Moreover, we constructed the PPI network composed of 145 targeted mRNAs and the subnetwork composed of 10 hub-targeted mRNAs (FCGR3A, IL13, CCR2, PPARGC1A, FCGR3B, ACSL1, PLXNA4, LPL, KAT2B and AOC3), which showed the interaction between targeted mRNAs. The above results indicated that the prognosis model we built can predict LUSC patients relatively accurately. The miRNA-mRNA regulatory network and the PPI network of targeted mRNAs illustrated the regulatory mechanisms and interactions between RNAs, which were of certain reference significance for us to further understand the molecular pathogenesis of LUSC and for clinical early diagnosis and treatment.

Simultaneous deep transcriptome and proteome profiling in a single mouse oocyte.

Although single-cell multi-omics technologies are undergoing rapid development, simultaneous transcriptome and proteome analysis of a single-cell individual still faces great challenges. Here, we developed a single-cell simultaneous transcriptome and proteome (scSTAP) analysis platform based on microfluidics, high-throughput sequencing, and mass spectrometry technology to achieve deep and joint quantitative analysis of transcriptome and proteome at the single-cell level, providing an important resource for understanding the relationship between transcription and translation in cells. This platform was applied to analyze single mouse oocytes at different meiotic maturation stages, reaching an average quantification depth of 19,948 genes and 2,663 protein groups in single mouse oocytes. In particular, we analyzed the correlation of individual RNA and protein pairs, as well as the meiosis regulatory network with unprecedented depth, and identified 30 transcript-protein pairs as specific oocyte maturational signatures, which could be productive for exploring transcriptional and translational regulatory features during oocyte meiosis.

Hybrid digital-analog FSO fronthaul system with channel-adaptive insertion of analog bandwidth.

With the arrival of the 5th generation mobile network, the number of user devices is increasing exponentially, and thus it is necessary to expand the capacity of transmission systems. In order to further improve the system spectral efficiency on the basis of existing mobile fronthaul devices, we propose a hybrid digital-analog fronthaul transmission system with adaptive insertion of analog bandwidth, which can dynamically change the position of inserted analog bandwidth based on the state information of free space optical (FSO) channel. We consider the effects of atmospheric attenuation and turbulence on the FSO channel and derive an analytical expression for the maximum analog signal bandwidth that can be inserted into the first null of the digital signal spectrum to meet BER requirement of 3.8 × 10-3. Through a comprehensive simulation, it is verified that the analog bandwidth is obtained by this expression can exactly represent the lower bound of the simulation results under weak turbulence condition. The obtained results show that the maximum insertable analog bandwidth beyond the spectral null of the digital signal can reach 10% of the digital signal bandwidth, even in the FSO link with a transmission distance of 0.5 km and attenuation factor of 8 dB/km.

Development of machine learning prognostic models for overall survival of prostate cancer patients with lymph node-positive.

Prostate cancer (PCa) patients with lymph node involvement (LNI) constitute a single-risk group with varied prognoses. Existing studies on this group have focused solely on those who underwent prostatectomy (RP), using statistical models to predict prognosis. This study aimed to develop an easily accessible individual survival prediction tool based on multiple machine learning (ML) algorithms to predict survival probability for PCa patients with LNI. A total of 3280 PCa patients with LNI were identified from the Surveillance, Epidemiology, and End Results (SEER) database, covering the years 2000-2019. The primary endpoint was overall survival (OS). Gradient Boosting Survival Analysis (GBSA), Random Survival Forest (RSF), and Extra Survival Trees (EST) were used to develop prognosis models, which were compared to Cox regression. Discrimination was evaluated using the time-dependent areas under the receiver operating characteristic curve (time-dependent AUC) and the concordance index (c-index). Calibration was assessed using the time-dependent Brier score (time-dependent BS) and the integrated Brier score (IBS). Moreover, the beeswarm summary plot in SHAP (SHapley Additive exPlanations) was used to display the contribution of variables to the results. The 3280 patients were randomly split into a training cohort (n = 2624) and a validation cohort (n = 656). Nine variables including age at diagnosis, race, marital status, clinical T stage, prostate-specific antigen (PSA) level at diagnosis, Gleason Score (GS), number of positive lymph nodes, radical prostatectomy (RP), and radiotherapy (RT) were used to develop models. The mean time-dependent AUC for GBSA, RSF, and EST was 0.782 (95% confidence interval [CI] 0.779-0.783), 0.779 (95% CI 0.776-0.780), and 0.781 (95% CI 0.778-0.782), respectively, which were higher than the Cox regression model of 0.770 (95% CI 0.769-0.773). Additionally, all models demonstrated almost similar calibration, with low IBS. A web-based prediction tool was developed using the best-performing GBSA, which is accessible at https://pengzihexjtu-pca-n1.streamlit.app/ . ML algorithms showed better performance compared with Cox regression and we developed a web-based tool, which may help to guide patient treatment and follow-up.

Application of a Metal Cobalt Based on 4,6-Bis(imidazol-1-yl)isophthalicacid Metal-Organic -Framework Materials in Photocatalytic CO2 Reduction, Antibacterial, and Dye Adsorption.

In this paper, the reported MOF ([Co(bimip)(H2O)0.5]·0.5H2O) was employed in photocatalytic CO2 reduction, antibacterial, and dye adsorption experiments. The photocatalytic activity of the MOF for CO2 reduction was systematically investigated. The high average CO generation rate of 3421.59 µmol·g-1·h-1 after 12 h confirms the efficient photocatalytic CO2 reduction ability of the MOF. At the same time, the MOF can completely inhibit the growth of S. aureus and C. albicans within 24 h when its concentration reaches 400 µg/mL and 500 µg/mL, respectively. The MOF has an adsorption capacity for CR. The adsorption rate was 83.42% at 60 min, and the adsorption capacity of the MOF for CR reached 500.00 mg·g-1.

3D organization of regulatory elements for transcriptional regulation in Arabidopsis.

BACKGROUND: Although spatial organization of compartments and topologically associating domains at large scale is relatively well studied, the spatial organization of regulatory elements at fine scale is poorly understood in plants. RESULTS: Here we perform high-resolution chromatin interaction analysis using paired-end tag sequencing approach. We map chromatin interactions tethered with RNA polymerase II and associated with heterochromatic, transcriptionally active, and Polycomb-repressive histone modifications in Arabidopsis. Analysis of the regulatory repertoire shows that distal active cis-regulatory elements are linked to their target genes through long-range chromatin interactions with increased expression of the target genes, while poised cis-regulatory elements are linked to their target genes through long-range chromatin interactions with depressed expression of the target genes. Furthermore, we demonstrate that transcription factor MYC2 is critical for chromatin spatial organization, and propose that MYC2 occupancy and MYC2-mediated chromatin interactions coordinately facilitate transcription within the framework of 3D chromatin architecture. Analysis of functionally related gene-defined chromatin connectivity networks reveals that genes implicated in flowering-time control are functionally compartmentalized into separate subdomains via their spatial activity in the leaf or shoot apical meristem, linking active mark- or Polycomb-repressive mark-associated chromatin conformation to coordinated gene expression. CONCLUSION: The results reveal that the regulation of gene transcription in Arabidopsis is not only by linear juxtaposition, but also by long-range chromatin interactions. Our study uncovers the fine scale genome organization of Arabidopsis and the potential roles of such organization in orchestrating transcription and development.

Application of a Mixed-Ligand Metal-Organic Framework in Photocatalytic CO2 Reduction, Antibacterial Activity and Dye Adsorption.

In this paper, a known mixed-ligand MOF {[Co2(TZMB)2(1,4-bib)0.5(H2O)2]·(H2O)2}n (compound 1) was reproduced, and its potential application potential was explored. It was found that compound 1 had high photocatalytic activity for CO2 reduction. After 12 h of illumination, the formation rate of CO, which is the product of CO2 reduction by compound 1, reached 3012.5 µmol/g/h. At the same time, compound 1 has a good antibacterial effect on Staphylococcus aureus (S. aureus), Escherichia coli (E. coli) and Candida albicans (C. albicans), which has potential research value in the medical field. In addition, compound 1 can effectively remove Congo Red from aqueous solutions and achieve the separation of Congo red from mixed dye solutions.

Corrigendum: Genome-wide analysis of transcriptome and histone modifications in Brassica napus hybrid.

[This corrects the article DOI: 10.3389/fpls.2023.1123729.].

Xanthophyll esterases in association with fibrillins control the stable storage of carotenoids in yellow flowers of rapeseed (Brassica juncea).

Biosynthesis, stabilization, and storage of carotenoids are vital processes in plants that collectively contribute to the vibrant colors observed in flowers and fruits. Despite its importance, the carotenoid storage pathway remains poorly understood and lacks thorough characterization. We identified two homologous genes, BjA02.PC1 and BjB04.PC2, belonging to the esterase/lipase/thioesterase (ELT) family of acyltransferases. We showed that BjPCs in association with fibrillin gene BjFBN1b control the stable storage of carotenoids in yellow flowers of Brassica juncea. Through genetic, high-resolution mass spectrometry and transmission electron microscopy analyses, we demonstrated that both BjA02.PC1 and BjB04.PC2 can promote the accumulation of esterified xanthophylls, facilitating the formation of carotenoid-enriched plastoglobules (PGs) and ultimately producing yellow pigments in flowers. The elimination of BjPCs led to the redirection of metabolic flux from xanthophyll ester biosynthesis to lipid biosynthesis, resulting in white flowers for B. juncea. Moreover, we genetically verified the function of two fibrillin genes, BjA01.FBN1b and BjB05.FBN1b, in mediating PG formation and demonstrated that xanthophyll esters must be deposited in PGs for stable storage. These findings identified a previously unknown carotenoid storage pathway that is regulated by BjPCs and BjFBN1b, while offering unique opportunities for improving the stability, deposition, and bioavailability of carotenoids.