A thorough investigation into the adsorption behavior of sophorolipid-modified fly ash towards compound pollution of lead and tetracycline.

Heavy metal ions and antibiotics were simultaneously detected in authentic water systems. This research, for the first time, employed synthesized sophorolipid-modified fly ash(SFA) to eliminate tetracycline(TC) and lead(Pb2+) from wastewater. Various characterization techniques, including SEM-EDS, FTIR, XPS, BET, and Zeta, were employed to investigate the properties of the SFA. The results showed that the sophorolipid modification significantly improved the fly ash's adsorption capacities for the target pollutants. The static adsorption experiments elucidated the adsorption behaviors of SFA towards TC and Pb2+ in single and binary systems, highlighting the effects of different Environmental factors on the adsorption behavior in both types of systems. In single systems, SFA exhibited a maximum adsorption capacity of 128.96 mg/g for Pb2+ and 55.57 mg/g for TC. The adsorption of Pb2+ and TC followed pseudo-second-order kinetics and Freundlich isotherm models. The adsorption reactions are endothermic and occur spontaneously. SFA demonstrates varying adsorption mechanisms for two different types of pollutants. In the case of Pb2+, the primary mechanisms include ion exchange, electrostatic interaction, cation-π interaction, and complexation, while TC primarily engages in hydrogen bonding, π-π interaction, and complexion. The interaction between Pb2+ and TC has been shown to improve adsorption efficiency at low concentrations. Additionally, adsorption-desorption experiments confirm the reliable cycling performance of modified fly ash, highlighting its potential as a cost-effective and efficient adsorbent for antibiotics and heavy metals.

Material flow analysis of heavy metals in large-scale cattle farms and ecological risk assessment of cattle manure application to fields.

This study bridges the knowledge gap pertaining to the pathways of heavy metal accumulation and migration within the industrial chain of large-scale cattle farms. Two such farms in Shaanxi serve as a basis for our exploration into Zn, Cu, Cr, Pb, As, and Cd dynamics. Employing material flow analysis complemented by predictive models, we evaluate the potential ecological risks of arable soil from heavy metal influx via manure application. Our findings indicate that Zn and Cu predominate the heavy metal export from these operations, composing up to 60.00%-95.67% of their total content. Predictive models based on 2021 data reveal a potential increase in Cd soil concentration by 0.08 mg/kg by 2035, insinuating a reduced safe usage period for cattle manure at less than 50 years. Conversely, projections from 2022 data point towards a gradual Cu rise in soil, reaching risk threshold levels after 126 years. These outcomes inform limitations in cattle manure utilisation strategies, underscoring Cu and Cd content as key barriers. The study underscores the criticality of continuous heavy metal surveillance within farm by products to ensure environmental protection and sustainable agricultural practices.

Enhancing the carbon content of coal gangue for composting through sludge amendment: A feasibility study.

Cocomposting coal gangue and sludge eliminates the challenge of utilizing coal gangue. However, there is limited understanding about the feasibility of cocomposting sludge and coal gangue, as well as the composting indicators, functional microorganisms, and safety risks involved. Therefore, this study evaluated the feasibility of enhancing carbon composting in coal gangue by incorporating sludge along with sawdust as a conditioner. Three laboratory-scale reactors were designed and labeled as T1 (20 % coal gangue, 60 % sludge, and 20 % sawdust), T2 (40 % coal gangue, 40 % sludge, and 20 % sawdust), and T3 (60 % coal gangue, 20 % sludge, and 20 % sawdust). Seed germination and plant growth assessments were conducted to ensure compost stability and assess phytotoxicity to cabbage (Brassica rapa chinensis L.) in terms of growth and biomass. The results indicated that the temperature, pH, EC and ammonia nitrogen of all three reactor conditions met the requirements for product decomposition. Composting was successfully achieved when the sludge proportion was 20 % (T3). However, when the sludge proportion was markedly high (T1), the harmlessness of the compost was reduced. The germination indices of T1, T2, and T3 reached 95 %, 122 %, and 119 % at maturity, respectively. This confirmed that the harmless cycle, which involved promoting condensation and aromatization, enhancing decay, and reducing composting time, was shorter in T2 and T3 than in T1. Coal gangue can also serve as a beneficial habitat for microorganisms, promoting an increase in their population and activity. Potting experiments in sandy soil revealed that the mechanism of action of compost products in soil included not only the enhancement of soil nutrients but also the improvement of soil texture. The results of this study suggest that using coal gangue as a raw material for composting is an efficient and environmentally friendly approach for producing organic fertilizers.

Synergistic catalysis induced by a multi-component system constructed by DBD plasma combined with α-Fe2O3/FeVO4/HCP and peroxymonosulfate for gatifloxacin removal.

The dielectric barrier discharge (DBD) multi-component system containing plasma, α-Fe2O3/FeVO4, and peroxymonosulfate (PMS) with high catalytic activity was successfully constructed. Thereinto, α-Fe2O3/FeVO4 was loaded on the honeycomb ceramic plate (HCP) surface (α-Fe2O3/FeVO4/HCP) and placed under the water surface below the discharge area. The catalytic activity was evaluated by the removal rate of gatifloxacin (GAT), and the DBD+α-Fe2O3/FeVO4+PMS system exhibited the optimal catalytic activity. The enhanced catalytic activity can be attributed to the fact that the occurrence of synergistic catalysis that simultaneously includes plasma oxidation, photocatalysis, PMS oxidation, O3 catalysis, and Fenton reaction. The effect of various initial degradation parameters including input power, PMS dosage, pH, etc. On GAT removal was investigated. DBD+α-Fe2O3/FeVO4+PMS system has a significant increase in the concentration of H2O2 and O3, and the role played in the multi-component system was analyzed. The identification and analysis of organic matters during GAT degradation were visualized with the help of 3D EEMs. HPLC-MS and theoretical calculations identified the major intermediates and further deduced the possible GAT degradation pathways. Additionally, the acute toxicity of the major intermediates was predicted by the QSAR model. Finally, the possible mechanisms of synergistic catalysis to enhance catalytic activity were discussed based on the characteristics of several advanced oxidation processes (AOPs) and the results of experimental and characterization. This work provides a feasible technical route and theoretical basis for wastewater treatment by plasma combined with other AOPs.

Fabrication and Separation of EGaIn Microparticles from Human Blood Based on Dielectrophoresis Force and a W-Type Electrode.

Harmful particles such as heavy metal particles in the human body can cause many problems such as kidney stones, gallstones, and cerebrovascular diseases. Therefore, it is critical to separate them from the blood and perform a systematic analysis as early as possible. Here, we apply eutectic gallium indium (EGaIn) microparticles as a model to study the separation of particles from blood, thanks to their properties of low toxicity, excellent degradability, and negligible vapor pressure. In particular, the dielectrophoresis (DEP) separation method is employed to separate EGaIn of different sizes and characteristics in blood. First, the screen-printing method is used to create EGaIn microparticles with diameters of 15, 23, 18, and 11 µm. According to the lifetime test, these microparticles can last more than 1 month, as evidenced by their surface oxidation characteristics. Moreover, a DEP platform with W-type electrodes is developed to sort EGaIn particles from whole human blood. The results show that a sorting efficiency of 95% can be attained, which is similar to the separation efficiency of 98% achieved by finite element analysis (FEA) using COMSOL software based on the orthogonal array experiment method. The proposed study successfully validates the use of the DEP method to separate particles from human blood, providing insights into heavy metal particle separating, drug screening, and cell sorting and potentially broadening the applications in environmental analysis, food engineering, and bioengineering.

Abundance and characteristics of microplastics in the surface water and sediment of parks in Xi'an city, Northwest China.

Microplastics (MPs), as a new type of pollutants, have attracted wide attention especially in recent years, but there was insufficient research on the distribution and characteristics of MPs in urban park water body. In this study, the pollution of MPs in water and sediment of Xi'an, the largest city in northwest China, was investigated. The MPs concentration in the surface water and sediment was 2900-6970 items/m3 and 940-3560 items/kg, respectively. According to the urban functions, the parks were divided into residential areas, commercial areas, tourism areas and industrial areas, and the highest abundance of MPs was observed in the tourism and residential areas, suggesting the impacts of human activities. MPs in these parks were mainly in four kinds of shapes, namely fiber, pellet, fragment and film, and dominated by fibers and fragments. Most of the extracted MPs were small in size, and 63-92% of them were smaller than 0.5 mm. Polypropylene and polyethylene terephthalate were the main polymer types in surface water and sediments, respectively. This study showed that the park water and sediment can be used as an important "sink" in MPs, which is of great significance for monitoring and alleviating the pollution of urban MPs. This study provided important reference for better understanding MPs levels in inland freshwaters.