RESUMO
Developing a reliable method for constructing mesoporous metal-organic frameworks (MOFs) with single-crystalline forms remains a challenging task despite numerous efforts. This study presents a solvent-mediated assembly method for fabricating zeolitic imidazolate framework (ZIF) single-crystal nanoparticles with a well-defined micro-mesoporous structure using polystyrene-block-poly(ethylene oxide) diblock copolymer micelles as a soft-template. The precise control of particle sizes, ranging from 85 to 1200 nm, is achieved by regulating nucleation and crystal growth rates while maintaining consistent pore diameters in mesoporous nanoparticles and a rhombohedral dodecahedron morphology. Furthermore, this study presents a robust platform for nanoarchitecturing to prepare hierarchically porous materials (e.g., core-shell and hollow structures), including microporous ZIF@mesoporous ZIF, hollow mesoporous ZIF, and mesoporous ZIF@mesoporous ZIF. Such a multimodal pore design, ranging from microporous to microporous/mesoporous and further micro-/meso-/macroporous, provides significant evidence for the future possibility of the structural design of MOFs.
RESUMO
Maximizing the utilization efficiency of monatomic Fe sites in Fe-N-C catalysts poses a significant challenge for their commercial applications. Herein, a structural and electronic dual-modulation is achieved on a Fe-N-C catalyst to substantially enhance its catalytic performance. We develop a facile multi-component ice-templating co-assembly (MIC) strategy to construct two-dimensional (2D) arrays of monatomic Fe-anchored hollow carbon nanoboxes (Fe-HCBA) via a novel dual-outward interfacial contraction hollowing mechanism. The pore engineering not only enlarges the physical surface area and pore volume but also doubles the electrochemically active specific surface area. Additionally, the unique 2D carbon array structure reduces interfacial resistance and promotes electron/mass transfer. Consequently, the Fe-HCBA catalysts exhibit superior oxygen reduction performance with a six-fold enhancement in both mass activity (1.84 A cm-2) and turnover frequency (0.048 e- site-1 s-1), compared to microporous Fe-N-C catalysts. Moreover, the incorporation of phosphorus further enhances the total electrocatalytic performance by three times by regulating the electron structure of Fe-N4 sites. Benefitting from these outstanding characteristics, the optimal 2D P/Fe-HCBA catalyst exhibits great applicability in rechargeable liquid- and solid-state zinc-air batteries with peak power densities of 186 and 44.5 mW cm-2, respectively.
RESUMO
Atomically dispersed Pt-group metals are promising as nanocatalysts because of their unique geometric structures and ultrahigh atomic utilization. However, loading isolated Pt-group metals in single-atom alloys (SAAs) with distinctive bimetallic sites is challenging. In this study, we present amorphous mesoporous Ni boride (Ni-B) as an ideal substrate to uniformly disperse Pt atoms with tunable loadings (1.7 to 12.2 wt %). The effect of the morphology, composition, and crystal phase of the Ni-B host on the growth and dispersion of Pt atoms is discussed. The resulting amorphous Pt-Ni-B mesoporous nanospheres exhibit superior electrocatalytic H2 evolution performance in acidic media. This strategy holds the potential to synthesize a diverse library of mesoporous amorphous Pt-group SAAs, by leveraging functional amorphous nanostructured 3d transition-metal borides as substrates, thereby proposing a comprehensive strategy to control atomically dispersed Pt-group metals.
RESUMO
The intrinsic roadblocks for designing promising Pt-based oxygen reduction reaction (ORR) catalysts emanate from the strong scaling relationship and activity-stability-cost trade-offs. Here, a carbon-supported Pt nanoparticle and a Mn single atom (PtNP-MnSA/C) as in situ constructed PtNP-MnSA pairs are demonstrated to be an efficient catalyst to circumvent the above seesaws with only â¼4 wt % Pt loadings. Experimental and theoretical investigations suggest that MnSA functions not only as the "assist" for Pt sites to cooperatively facilitate the dissociation of O2 due to the strong electronic polarization, affording the dissociative pathway with reduced H2O2 production, but also as an electronic structure "modulator" to downshift the d-band center of Pt sites, alleviating the overbinding of oxygen-containing intermediates. More importantly, MnSA also serves as a "stabilizer" to endow PtNP-MnSA/C with excellent structural stability and low Fenton-like reactivity, resisting the fast demetalation of metal sites. As a result, PtNPs-MnSA/C shows promising ORR performance with a half-wave potential of 0.93 V vs reversible hydrogen electrode and a high mass activity of 1.77 A/mgPt at 0.9 V in acid media, which is 19 times higher than that of commercial Pt/C and only declines by 5% after 80,000 potential cycles. Specifically, PtNPs-MnSA/C reaches a power density of 1214 mW/cm2 at 2.87 A/cm2 in an H2-O2 fuel cell.
RESUMO
Electrocatalyst engineering from the atomic to macroscopic level of electrocatalysts is one of the most powerful routes to boost the performance of electrochemical devices. However, multi-scale structure engineering mainly focuses on the range of atomic-to-particle scale such as hierarchical porosity engineering, while catalyst engineering at the macroscopic level, such as the arrangement configuration of nanoparticles, is often overlooked. Here, a 2D carbon polyhedron array with a multi-scale engineered structure via facile chemical etching, ice-templating induced self-assembly, and high-temperature pyrolysis processes is reported. Controlled phytic acid etching of the carbon precursor introduces homogeneous atomic phosphorous and nitrogen doping, as well as a well-defined mesoporous structure. Subsequent ice-templated self-assembly triggers the formation of a 2D particle array superstructure. The atomic-level doping gives rise to high intrinsic activity, while the well-engineered porous structure and particle arrangement addresses the mass transport limitations at the microscopic particle level and macroscopic electrode level. As a result, the as-prepared electrocatalyst delivers outstanding performance toward oxygen reduction reaction in both acidic and alkaline media, which is better than recently reported state-of-the-art metal-free electrocatalysts. Molecular dynamics simulation together with extensive characterizations indicate that the performance enhancement originates from multi-scale structural synergy.
RESUMO
Improving catalytic performance relies heavily on the rational design of the spatial structure of electrocatalysts, achieved through exposure of active sites, acceleration of the charge/mass transfer rate, and confinement of the reactants. In this study, we have fabricated Co nanoparticles embedded in overhang eave-like hollow N-doped mesoporous carbon (Co@EMPC) by adjusting the thickness of mesoporous polydopamine (mPDA). Thanks to the abundance of short mesoporous channels within the porous structure and the tuned electronic properties resulting from heterojunction structures between metal and carbon, the prepared Co@EMPC provides increased accessibility to active sites and enhanced mass and charge transfer rates. These features contribute to superior performance in the oxygen reduction reaction (ORR), with a half-wave potential of 0.874 V vs RHE, as well as exceptional durability in alkaline media. This study introduces a useful approach to enhance the ORR using eave-like hollow nanoreactors.
RESUMO
Although hollow carbon structures have been extensively studied in recent years, their interior surfaces are not fully utilized due to the lack of fluent porous channels in the closed shell walls. This study presents a tailored design of open-mouthed particles hollow cobalt/nitrogen-doped carbon with mesoporous shells (OMH-Co/NC), which exhibits sufficient accessibility and electroactivity on both the inner and outer surfaces. By leveraging the self-conglobation effect of metal sulfate in methanol, a raspberry-structured Zn/Co-ZIF (R-Zn/Co-ZIF) precursor is obtained, which is further carbonized to fabricate the OMH-Co/NC. In-depth electrochemical investigations demonstrate that the introduction of open pores can enhance mass transfer and improve the utilization of the inner active sites. Benefiting from its unique structure, the resulting OMH-Co/NC exhibits exceptional electrocatalytic oxygen reduction performance, achieving a half-wave potential of 0.865 V and demonstrating excellent durability.
RESUMO
Construction of a well-defined mesoporous nanostructure is crucial for applying nonnoble metals in catalysis and biomedicine owing to their highly exposed active sites and accessible surfaces. However, it remains a great challenge to controllably synthesize superparamagnetic CoFe-based mesoporous nanospheres with tunable compositions and exposed large pores, which are sought for immobilization or adsorption of guest molecules for magnetic capture, isolation, preconcentration, and purification. Herein, a facile assembly strategy of a block copolymer was developed to fabricate a mesoporous CoFeB amorphous alloy with abundant metallic Co/Fe atoms, which served as an ideal scaffold for well-dispersed loading of Au nanoparticles (â¼3.1 nm) via the galvanic replacement reaction. The prepared Au-CoFeB possessed high saturation magnetization as well as uniform and large open mesopores (â¼12.5 nm), which provided ample accessibility to biomolecules, such as nucleic acids, enzymes, proteins, and antibodies. Through this distinctive combination of superparamagnetism (CoFeB) and biofavorability (Au), the resulting Au-CoFeB was employed as a dispersible nanovehicle for the direct capture and isolation of p53 autoantibody from serum samples. Highly sensitive detection of the autoantibody was achieved with a limit of detection of 0.006 U/mL, which was 50 times lower than that of the conventional p53-ELISA kit-based detection system. Our assay is capable of quantifying differential expression patterns for detecting p53 autoantibodies in ovarian cancer patients. This assay provides a rapid, inexpensive, and portable platform with the potential to detect a wide range of clinically relevant protein biomarkers.
Assuntos
Nanopartículas Metálicas , Feminino , Humanos , Nanopartículas Metálicas/química , Autoanticorpos , Ouro/química , Proteína Supressora de Tumor p53 , Nanopartículas Magnéticas de Óxido de FerroRESUMO
Carbon-based electrocatalysts with atomically dispersed Fe-N-C display promising performance for oxygen reduction reaction (ORR) amongst non-precious electrocatalysts. Nonetheless, increasing the number and utilization of Fe-N-C active sites is challenging. Designing morphologies and adjusting the pore structure of carbon-based electrocatalysts would boost the mass transfer, enhance the utilization of the active sites, and increase the overall ORR performance. In this work, a concave N-doped carbon cubes structure adorned with highly external Fe-Nx was designed and produced by the space-confined induced strategy. The optimal electrocatalyst revealed excellent ORR activity in both alkaline and acidic electrolytes, with half-wave potentials of 0.86 and 0.75â V, respectively. The superior performance arose from its unique concave structure, possessing more accessible active sites with improved intrinsic activity, which holds promising potential for preparing advanced ORR electrocatalysts.
RESUMO
Mesenchymal stem cells (MSCs) secrete cytokines in a paracrine or autocrine manner to regulate immune response and tissue regeneration. Our previous research revealed that MSCs use the complex of Fas/Fas-associated phosphatase-1 (Fap-1)/caveolin-1 (Cav-1) mediated exocytotic process to regulate cytokine and small extracellular vesicles (EVs) secretion, which contributes to accelerated wound healing. However, the detailed underlying mechanism of cytokine secretion controlled by Cav-1 remains to be explored. We show that Gingiva-derived MSCs (GMSCs) could secrete more C-X-C motif chemokine ligand 10 (CXCL10) but showed lower phospho-Cav-1 (p-Cav-1) expression than skin-derived MSCs (SMSCs). Moreover, dephosphorylation of Cav-1 by a Src kinase inhibitor PP2 significantly enhances CXCL10 secretion, while activating phosphorylation of Cav-1 by H2O2 restraints CXCL10 secretion in GMSCs. We also found that Fas and Fap-1 contribute to the dephosphorylation of Cav-1 to elevate CXCL10 secretion. Tumor necrosis factor-α serves as an activator to up-regulate Fas, Fap-1, and down-regulate p-Cav-1 expression to promote CXCL10 release. Furthermore, local applying p-Cav-1 inhibitor PP2 could accelerate wound healing, reduce the expression of α-smooth muscle actin and increase cleaved-caspase 3 expression. These results indicated that dephosphorylation of Cav-1 could inhibit fibrosis during wound healing. The present study establishes a previously unknown role of p-Cav-1 in controlling cytokine release of MSC and may present a potential therapeutic approach for promoting scarless wound healing.
RESUMO
Electrocatalytic reduction of carbon dioxide to valuable chemicals is a sustainable technology that can achieve a carbon-neutral energy cycle in the environment. Electrochemical CO2 reduction reaction (CO2 RR) processes using metal-organic frameworks (MOFs), featuring atomically dispersed active sites, large surface area, high porosity, controllable morphology, and remarkable tunability, have attracted considerable research attention. Well-defined MOFs can be constructed to improve conductivity, introduce active centers, and form carbon-based single-atom catalysts (SACs) with enhanced active sites that are accessible for the development of CO2 conversion. In this review, the progress on pristine MOFs, MOF hybrids, and MOF-derived carbon-based SACs is summarized for the electrocatalytic reduction of CO2 . Finally, the limitations and potential improvement directions with respect to the advancement of MOF-related materials for the field of research are discussed. These summaries are expected to provide inspiration on reasonable design to develop stable and high-efficiency MOFs-based electrocatalysts for CO2 RR.
RESUMO
Mesenchymal stem cells (MSCs) hold great potential in treating patients with diabetes, but the therapeutic effects are not always achieved. Particularly, the clinical factors regulating MSC therapy in this setting are largely unknown. In this study, 24 patients with type 2 diabetes mellitus (T2DM) treated with insulin were selected to receive three intravenous infusions of stem cells from human exfoliated deciduous teeth (SHED) over the course of 6 weeks and were followed up for 12 months. We observed a significant reduction of glycosylated serum albumin level (P < .05) and glycosylated hemoglobin level (P < .05) after SHED transplantation. The total effective rate was 86.36% and 68.18%, respectively, at the end of treatment and follow-up periods. Three patients ceased insulin injections after SHED transplantation. A steamed bread meal test showed that the serum levels of postprandial C-peptide at 2 hours were significantly higher than those at the baseline (P < .05). Further analysis showed that patients with a high level of blood cholesterol and a low baseline level of C-peptide had poor response to SHED transplantation. Some patients experienced a transient fever (11.11%), fatigue (4.17%), or rash (1.39%) after SHED transplantation, which were easily resolved. In summary, SHED infusion is a safe and effective therapy to improve glucose metabolism and islet function in patients with T2DM. Blood lipid levels and baseline islet function may serve as key factors contributing to the therapeutic outcome of MSC transplantation in patients with T2DM.
Assuntos
Diabetes Mellitus Tipo 2 , Transplante de Células-Tronco Mesenquimais , Dente Decíduo/citologia , Glicemia , Peptídeo C , Diabetes Mellitus Tipo 2/terapia , Humanos , Insulina , Ilhotas Pancreáticas , Células-TroncoRESUMO
Multiple heteroatom-doped carbons with 3D ordered macro/meso-microporous structures have not been realized by simple carbonization of metal-organic frameworks (MOFs). Herein, ordered macroporous phosphorus- and nitrogen-doped carbon (M-PNC) is prepared successfully by carbonization of double-solvent-induced MOF/polystyrene sphere (PS) precursors accompanied with spontaneous removal of the PS template, followed by post-doping. M-PNC shows a high specific surface area of 837 m2 g-1, nitrogen doping of 3.17 at%, and phosphorus doping of 1.12 at%. Thanks to the hierarchical structure, high specific surface area, and multiple heteroatom-doping, M-PNC exhibits unusual catalytic activity as an electrocatalyst for the oxygen reduction reaction. Computational calculation reveals that the P[double bond, length as m-dash]O group helps stabilize the adsorption of intermediates, and the position of P[double bond, length as m-dash]O relative to graphitic N significantly improves the activity of the adjacent carbons for electrocatalysis.
RESUMO
Currently, designing and developing high-performance, cost-effective yet stable electrocatalysts for oxygen evolution reaction (OER) is a challenging task owing to the existing high overpotential and sluggish OER kinetics. Herein, we successfully fabricated a hierarchical necklace-like nanohybrid via assembling Ni-Co mixed metal phosphides/carbon (NiCoP/C) hollow nanocages and nanosheets with carbon nanotubes (CNTs). It was revealed that Ni-Co-layered double hydroxide/carbon hollow nanocages and nanosheets derived from Co-based MOF polyhedrons (ZIF-67) could pass through CNTs and perpendicularly anchor onto the surface of CNTs, respectively, thus finally constructing a hierarchical CNTs@NiCoP/C nanohybrid via further low-temperature phosphorization. The as-assembled CNTs@NiCoP/C electrocatalyst exhibited promising electrocatalytic performance towards OER with a low overpotential of about 0.297 V for reaching a current density of 10.0 mA cm-2 and a low Tafel slope of 57.35 mV dec-1 in 1.0 M KOH owing to the advantages of its unique superstructure and multiple composition. Furthermore, the present CNTs@NiCoP/C also possessed good long-term operation stability. This synthesis strategy involving the combination of transition metal phosphides and CNTs to form hierarchical nanostructures holds promising potential for designing highly OER-active electrocatalysts.