Electromechanically Reconfigurable Terahertz Stereo Metasurfaces.

Dynamic terahertz devices are vital for the next generation of wireless communication, sensing, and non-destructive imaging technologies. Metasurfaces have emerged as a paradigm-shifting platform, offering varied functionalities, miniaturization, and simplified fabrication compared to their 3D counterparts. However, the presence of in-plane mirror symmetry and reduced degree of freedom impose fundamental limitations on achieving advanced chiral response, beamforming, and reconfiguration capabilities. In this work, a platform composed of electrically actuated resonators that can be colossally reconfigured between planar and 3D geometries is demonstrated. To illustrate the platform, metadevices with 3D Split Ring Resonators are fabricated, wherein two counteracting driving forces are combined: i) folding induced by stress mismatch, which enables non-volatile state design and ii) unfolding triggered by the strain associated with insulator-to-metal transition in VO2, which facilitates volatile structural reconfiguration. This large structural reconfiguration space allows for resonance mode switching, widely tunable magnetic and electric polarizabilities, and increased frequency agility. Moreover, the unique properties of VO2, such as the hysteretic nature of its phase transition is harnessed to demonstrate a multi-state memory. Therefore, these VO2 integrated metadevices are highly attractive for the realization of 6G communication devices such as reconfigurable intelligent surfaces, holographic beam formers, and spatial light modulators.

Skeletal, dentoalveolar and soft tissue changes after stabilization splint treatment for patients with temporomandibular joint disorders.

BACKGROUND: Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable treatment effect in TMD. The possible changes at the skeletal, dental, and soft tissue levels need to be addressed to evaluate the benefit/risk ratio of this therapeutic procedure. Accordingly, this study aimed to three­dimensionally evaluate skeletal, dentoalveolar and soft tissue changes after SS treatment for patients with TMD. METHODS: This retrospective study included 74 adult patients with myofascial and/or intra-articular disorders (25 males and 49 females), with an average age of 22.88 ± 4.8 years, who underwent SS treatment. Pre- and post-treatment Cone beam computed tomography were analysed using Invivo 6.0.3 software. The primary outcome was the vertical skeletal and dentoalveolar changes, while the secondary outcomes were the anteroposterior skeletal, dentoalveolar and soft tissue changes. Paired t-test and Wilcoxon rank sum test were used for statistical analyses. RESULTS: For the primary outcome; skeletally, there was a significant increase in mandibular plane inclination (difference: 0.82°±1.37), decrease facial height ratio (difference: 0.45%±1.07) and at the dentoalveolar level, the inclination of the functional (FOP-SN, FOP-FH) and bisecting (BOP-SN, BOP-FH) occlusal planes exhibited a significant increase too (difference: 0.38 ± 1.43°, 0.49 ± 1.62°, 0.44 ± 1.29° and 0.41 ± 1.17°, respectively) and also a decrease in the overbite (difference: -0.54 ± 0.83). For the secondary outcomes; there was a significant decrease in mandibular position (SNB) (difference: 1.60 ± 1.36°) and increase in the overjet (difference: 0.93 ± 1.04, p < 0.001) and a significant lower lip retrusion (difference: 0.33 ± 1.01 mm p < 0.01), was observed too. CONCLUSIONS: SS therapy resulted in significant vertical skeletal and dentoalveolar changes that were manifested mainly by facial height ratio, mandibular and occlusal plane changes, and to a lesser extent, significant anteroposterior skeletal, dentoalveolar, and soft tissue changes in the form of mandibular position, increased overjet and a more retrusive lower lip. These changes should be considered during patients' selection prior to initiating SS therapy.

Therapeutic Effect of a Novel M1 Macrophage-Targeted Nanodrug in Chronic Periodontitis Mice.

Chronic periodontitis is a chronic, progressive, and destructive disease. Especially, the large accumulation of advanced glycation end products (AGEs) in a diseased body will aggravate the periodontal tissue damage, and AGEs induce M1 macrophages. In this project, the novel nanodrugs, glucose-PEG-PLGA@MCC950 (GLU@MCC), are designed to achieve active targeting with the help of glucose transporter 1 (GLUT1) which is highly expressed in M1 macrophages induced by AGEs. Then, the nanodrugs release MCC950, which is a kind of NLRP3 inhibitor. These nanodrugs not only can improve the water solubility of MCC950 but also exhibit superior characteristics, such as small size, stability, innocuity, etc. In vivo experiments showed that GLU@MCC could reduce periodontal tissue damage and inhibit cell apoptosis in periodontitis model mice. In vitro experiments verified that its mechanism of action might be closely related to the inhibition of the NLRP3 inflammatory factor in M1 macrophages. GLU@MCC could effectively reduce the damage to H400 cells caused by AGEs, decrease the expression of NLRP3, and also obviously reduce the M1-type macrophage pro-inflammatory factors such as IL-18, IL-1ß, caspase-1, and TNF-α. Meanwhile, the expression of anti-inflammatory factor Arg-1 in the M2 macrophage was increased. In brief, GLU@MCC would inhibit the expression of inflammatory factor NLRP3 and exert antiperiodontal tissue damage in chronic periodontitis via GLUT1 in the M1 macrophage as the gating target. This study provides a novel nanodrug for chronic periodontitis treatment.

Quantitative and qualitative condylar changes following stabilization splint therapy in patients with temporomandibular joint disorders with and without skeletal lateral mandibular asymmetry: a cone beam computed tomographic study.

BACKGROUND: Temporomandibular disorders (TMDs) encompass pain and dysfunction in the jaw, muscles, and adjacent structures. This study aimed to explore the quantitative (condylar position, morphology) and qualitative (bone mineral density (BMD)) therapeutic outcomes following a stabilization splint (S.S.) therapy in adult patients diagnosed with TMD (Arthralgia) with/without lateral mandibular asymmetry (MA) using cone beam computed tomography (CBCT). METHODS: In this retrospective clinical study, 60 adult TMD patients who received S.S. therapy were enrolled and allocated into the TMD group (TMDG) and TMD with MA group (TMD + MAG). The diagnosis was made according to the Diagnostic Criteria for TMD (DC/TMD) AXIS I. MA was measured from the mid-sagittal plane to the Menton point. CBCT was used to scan the temporomandibular joints pre- (T0) and post- (T1)-treatment for three-dimensional analysis. Intra- and intergroup statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal‒Wallis test. RESULTS: For quantitative comparisons, there was a statistically significant difference between T0 and T1 in the joint spaces of TMD + MAG (anterior, superior, posterior, and coronal lateral on the deviated side as well as in the superior, coronal medial joint space of the contralateral side). Morphologically, the deviated side had a narrower condylar width, reduced condylar height, and a steeper eminence angle. In contrast, the contralateral side tended to have a greater condylar length. For qualitative measurements, BMD also showed statistical significance between T0 and T1 in the majority of the condyle slopes (AS, SS, PS, and LS on the deviated side and in AS and MS on the contralateral side) of TMD + MAG. Additionally, only the AS and PS showed significance in TMDG. CONCLUSION: Multiple joint space widening (AJS and CMS) and narrowing (SJS, PJS, and CLS) could characterize the deviated side in TMD + MA. Factors like narrower condylar width, reduced condylar height, and steeper eminence angle on the deviated side can worsen TMD + MA. Proper alignment of the condyle-disc position is essential for optimal function and load distribution, potentially affecting bone mineral density (BMD). MA plays a prominent role in disturbing bone densities. S.S. therapy shows more evident outcomes in TMD + MAG (on the deviated side compared to the contralateral side) than the TMDG.

Influence of polyether ether ketone coping crown on the adaptation of implant abutment.

OBJECTIVE: To evaluate the influence of polyether ether ketone coping crown on the adaptation of implant abutment. Methods: The vitro study was conducted at the department of Prosthodontics, Hainan Stomatological Hospital, China, from October 2021 to March 2022, and comprised patients undergoing implant surgery on first molar. Patients were divided into two groups, with group A patients receiving polyether ether ketone coping crowns, and group B receiving zirconia crowns. Replica technique was used to replicate the gap between the crowns and the abutments. The thickness of the silicone film was measured under the stereomicroscope, and the gap between the groups was compared. Data was analysed using SPSS 22. RESULTS: In group A, mean marginal gap was 82.43±25.00µm, and mean overall gap was 85.45±33.75µm. In group B, the corresponding values were 65.09±11.69µm and 78.04±26.67µm. There was a significant difference in the adaptation between the groups at the marginal and overall measurement points (p<0.05). Conclusion: Marginal and internal adaptations of polyether ether ketone coping crown for abutment could be considered clinically acceptable.

Abnormal Thickness-Dependent Thermal Transport in Suspended 2D PdSe2.

Research on 2D materials originally focused on the highly symmetrical materials like graphene, h-BN. Recently, 2D materials with low-symmetry lattice such as PdSe2 have drawn extensive attention, due to the interesting layer-dependent bandgap, promising mechanical properties and excellent thermoelectric performance, etc. In this work, the phonon thermal transport is studied in PdSe2 with a pentagonal fold structure. The thermal conductivity of PdSe2 flakes with different thicknesses ranging from few nanometers to several tens of nanometers is measured through the thermal bridge method, where the thermal conductivity increases from 5.04 W mk-1 for 60 nm PdSe2 to 34.51 W mk-1 for the few-layer one. The atomistic modelings uncover that with the thickness thinning down, the lattice of PdSe2 becomes contracted and the phonon group velocity is enhanced, leading to the abnormal increase in the thermal conductivity. And the upshift of the optical phonon modes contributes to the increase of the thermal conductivity as well by creating less acoustic phonon scattering as the thickness reduces. This study probes the interesting abnormal thickness-dependent thermal transport in 2D materials, which promotes the potential thermal management at nanoscale.

Accurate Thermal Conductivity Measurements of Porous Thin Films by Time-Domain Thermoreflectance.

Accurate measurements of the thermal conductivity (κ) of porous thin films are still limited due to challenges to deposit flat and continuous metal transducers on porous samples, a necessity for many thermal measurement techniques for nanostructures. In this paper, we introduce an approach based on time-domain thermoreflectance (TDTR) to accurately and conveniently measure κ of porous thin films by transferring a flat and smooth metal film unto porous samples as the transducer for TDTR measurements. We demonstrate our approach by measuring κ of a series of microscale holey SiO2 films with diameters of 1-3.5 µm and porosity of 13-50%. To achieve a measurement uncertainty of <12%, we ensure that the metal transducer films are sufficiently stiff and establish good thermal contact with the holey SiO2 samples. Our κ measurements agree well with calculations of κ from effective medium theory. Our approach could provide a convenient way to further investigate the thermal transport properties of porous films.

Interleukin-37 ameliorates periodontitis development by inhibiting NLRP3 inflammasome activation and modulating M1/M2 macrophage polarization.

OBJECTIVE: Our study was designed to explore the role of IL-37 in M1/M2 macrophage polarization imbalance in the pathogenesis of periodontitis. BACKGROUND: Periodontitis is a chronic progressive inflammatory disease featured by gingival inflammation and alveolar bone resorption. Recent research has revealed that regulating macrophage polarization is a viable method to ameliorate periodontal inflammation. IL-37 is an anti-inflammatory cytokine, which has been reported to inhibit innate and adaptive immunity. METHODS: For in vitro experiment, mouse macrophage RAW264.7 cells were pretreated with 0.1 ng/mL recombinant human IL-37. M1 and M2 polarizations of RAW264.7 cells were induced by 100 ng/mL LPS and 20 ng/mL IL-4, respectively. The expression of M1 (iNOS, TNF-α, and IL-6) and M2 (CD206, Arg1, and IL-10) phenotype markers in RAW264.7 cells was detected by RT-qPCR, western blotting, and immunofluorescence staining. For in vivo experiment, experimental periodontitis mouse models were established by sterile silk ligation (5-0) around the bilateral maxillary second molar of mice for 1 week. H&E staining of the maxillary alveolar bone was used to show the resorption of root cementum and dentin. Alveolar bone loss in mouse models was evaluated through micro-CT analysis. The expression of iNOS and CD206 in gingival tissues was assessed by immunohistochemistry staining. NLRP3 inflammasome activation was confirmed by western blotting. RESULTS: IL-37 pretreatment reduced iNOS, TNF-α, and IL-6 expression in LPS-treated RAW264.7 cells but increased CD206, Arg1, and IL-10 in IL-4-treated RAW264.7 cells. LPS-induced upregulation in NLRP3, GSDMD, cleaved-IL-1ß, and cleaved-caspase-1 expression was antagonized by IL-37 treatment. In addition, IL-37 administration ameliorated the resorption of root cementum and dentin in periodontitis mouse models. IL-37 prominently decreased iNOS+ cell population but increased CD206+ cell population in gingival tissues of periodontitis mice. The enhancement in NLRP3, GSDMD, cleaved-IL-1ß, and cleaved-caspase-1 expression in the gingival tissues of periodontitis mice was offset by IL-37 administration. CONCLUSION: IL-37 prevents the progression of periodontitis by suppressing NLRP3 inflammasome activation and mediating M1/M2 macrophage polarization.

Three-dimensional evaluation of upper pharyngeal airway, hyoid bone, and craniocervical changes following stabilization splint therapy in adult patients with temporomandibular joint disorders and mandibular deviation: A retrospective study.

OBJECTIVE: This study aimed primarily to analyze the three-dimensional (3D) changes in the pharyngeal airway (PA), and secondarily, the hyoid bone (HB) and the craniocervical (CC) following stabilization splint (SS) therapy in adult patients with temporomandibular joint disorders (TMD) and mandibular deviation (MD). METHODS: Thirty-five adult patients with TMD and MD, who were treated using SS with a mean age of 25.14 ± 6.11 years, were enrolled in this retrospective clinical study. Pre- and post-therapeutic cone-beam computed tomography (CBCT) scans were analyzed. PA dimension,nasopharyngeal, oropharyngeal, hypopharyngeal, sub-hypopharyngeal, and total pharyngeal airway spaces were measured in surface area, volume, minimum constricted area (MCA) and width, HB position, and CC posture were analyzed three-dimensionally using InVivo 6.0.3 and Dolphin 11.95 software. Wilcoxon rank-sum or Paired t-test was conducted, and P < 0.05 was considered significant. RESULTS: SS therapy was administered for a period of 9.49 ± 4.02 months. The oropharyngeal airway space showed a significant decrease in sagittal width. The hypopharyngeal surface area, volume, MCA, and sagittal width decreased significantly. In terms of HB, hyoid-mandibular plane (H-MP), retrognathia-third vertebra's most inferior-anterior (RGN-C3ia), and retrognathia-Sella (RGN-S) distances significantly decreased. The Nasion-Sella line and the line that passes through C2ip to the odontoid process posterior tangent (NSL-OPT) angle in CC posture also decreased significantly. CONCLUSION: SS therapy in TMD patients with MD mainly results in narrowing of the hypopharyngeal region, no change in HB position and improvement in head posture. These results undoubtedly assist in diagnosis and treatment of clinical conditions.

Quantitative and qualitative condylar changes following stabilization splint therapy in patients with temporomandibular joint disorders.

OBJECTIVE: This study aimed to explore the quantitative and qualitative condylar changes following stabilization splint (S.S) therapy, including condylar position, morphology, and bone mineral density (BMD) in subjects with temporomandibular disorders (TMD). MATERIALS AND METHODS: In this retrospective clinical study, we enrolled 40 TMD subjects (80 joints) aged 18 to 35 years, for whom a S.S was used to treat TMD. The 80 TMD consists of 32 masticatory muscle disorders (myalgia) and 48 TMJ disorders (arthralgia). Cone beam computed tomography (CBCT) was used to scan the TMJs of subjects pre- and post-treatment for three-dimensional analysis (3D). Using Mimics software v.21.0, quantitative (3D condylar and joint spaces dimensions parameters were measured using linear measurements in millimeters, according to the Kamelchuk method and Ikeda method, while the assessment of anteroposterior condyle position within the glenoid fossa was based on the method of Pullinger and Hollender), and qualitative (a round bone tissue with an area of 2 mm2 in three representative areas according to the Kamelchuk method to measure condylar BMD) pre- and post-treatment. Intra- and inter-group statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal-Wallis test, respectively. RESULTS: The course of treatment was 6-12 months, with an average of 9.1 months. For the pre- and post-treatment quantitative comparisons, there was a statistically significant difference in the anterior joint space (AJS) and coronal medial space, as well as the condyle length in the myalgia group and condylar width in the arthralgia group. For qualitative measurements, a significant difference was observed in the posterior slope of the myalgia group and the arthralgia group's anterior, superior, and posterior slopes. The inter-group comparisons revealed significant differences in AJS, condylar length, and anterior slope density. CONCLUSION: In short-term follow-up, the S.S influenced patients with TMD from different origins; it changes anterior and coronal medial joint space, condyle length in myalgia, and width in arthralgia. Furthermore, it improved the condyle bone density more evidently in arthralgia. CLINICAL RELEVANCE: This study highlights the influence of S.S on symptomatic populations with TMD of different origins from a qualitative and quantitative perspective.

Giant thermal switching in ferromagnetic VSe2 with programmable switching temperature.

Active and reversible modulation of thermal conductivity can realize efficient heat energy management in many applications such as thermoelectrics. Using first-principles calculations, this study reports a giant thermal switching ratio of 12, much higher than previously reported values, in monolayer 2H-VSe2 above room temperature. Detailed analysis indicates that the high thermal switching ratio is dominated by the ferromagnetic ordering induced phonon bandgap, which significantly suppresses the phonon-phonon scattering phase space across the entire vibration spectrum. The thermal switching in bulk 2H-VSe2 is also investigated and the thermal switching ratio reaches 9.2 at the magnetic transition temperature. Both the phonon-phonon scattering space phase and phonon anharmonicity are responsible for the 9.2-fold thermal switching. This study advances the understanding of heat energy transport in two-dimensional ferromagnets, and also provides new insight into heat energy control and conversion.

Analysis of ceRNA networks during mechanical tension-induced osteogenic differentiation of periodontal ligament stem cells.

The molecular mechanisms underlying osteogenic differentiation of periodontal ligament stem cells (PDLSCs) under mechanical tension remain unclear. This study aimed to identify a potential long non-coding ribonucleic acids (lncRNAs)/circular RNAs (circRNAs)-microRNAs (miRNAs)-messenger RNAs (mRNAs) network in mechanical tension-induced osteogenic differentiation of PDLSCs. PDLSCs were isolated from the healthy human periodontal ligament, identified, cultured, and exposed to tensile force. The expression of osteogenic markers was examined, and whole transcriptome sequencing was performed to identify the expression patterns of lncRNA, circRNA, miRNAs, and mRNAs. Enrichment analyses were also performed. Candidate targets of differentially expressed non-coding RNAs (ncRNAs) were predicted, and potential competitive endogenous RNA (ceRNA) networks were constructed by Cytoscape. We found that the osteogenic differentiation of PDLSCs was significantly enhanced under dynamic tension (magnitude: 12%, frequency: 0.7 Hz). Overall, 344 lncRNAs, 57 miRNAs, 41 circRNAs, and 70 mRNAs were differentially expressed in the tension group and the control group. Functional enrichment analysis showed that differentially expressed mRNAs were mainly enriched in osteogenesis-related and mechanical stress-related biological processes and signal transduction pathways (e.g., tumor necrosis factor [TNF] and Hippo signaling pathways). The lncRNA/circRNA-miRNA-mRNA networks were depicted, and potential key ceRNA networks were identified. Our findings may help to further explore the underlying regulatory mechanism of osteogenic differentiation of PDLSCs under mechanical tensile stress.

Effect of Tensile Frequency on the Osteogenic Differentiation of Periodontal Ligament Stem Cells.

Purpose: The role of periodontal ligament stem cells (PDLSCs) in mediating osteogenesis involved in orthodontic tooth movement (OTM) is well established. However, various relevant in vitro studies vary in the frequency of tension. The effect of tensile frequency on the mechanotransduction of PDLSCs is not clear. The current study aimed to determine the effect of different tensile frequencies on the osteogenic differentiation of PDLSCs and to identify important mechano-sensitivity genes. Methods: Human PDLSCs were isolated, identified, and subjected to cyclic equibiaxial tensile strain of 12% at different frequencies of 0.1 Hz, 0.5 Hz, 0.7 Hz, or static cultures. Osteogenic differentiation of PDLSCs was assessed by using Western blotting. High-throughput sequencing was used to identify differential mRNA expression. Short time-series expression miner (STEM) was utilized to describe the frequency patterns of the mRNAs. The functions and enriched pathways were identified, and the hub genes were identified and validated. Results: We found that the osteoblastic differentiation capacity of PDLSCs increased with tensile frequency in the range of 0.1-0.7 Hz. Eight frequency-tendency gene expression profiles were identified to be statistically significant. Tensile frequency-specific expressed genes, such as SALL1 and EYA1, which decreased with the increase in tensile frequency, were found. Conclusion: The osteoblastic differentiation of PDLSCs under mechanical tensile force is frequency dependent. EYA1 and SALL1 were identified as potential important tensile frequency-sensitive genes, which may contribute to the cyclic tension-induced osteogenic differentiation of PDLSCs in a frequency-dependent manner.

FAM3B Serves as a Biomarker for the Development and Malignancy of Oral Lichen Planus.

PURPOSE: Oral lichen planus (OLP) is a potentially malignant condition with unclear etiology. This study aimed to identify potential biomarkers and mechanisms for OLP progression through bioinformatics analyses. METHODS: Gene Expression Omnibus (GEO) datasets were screened to identify differentially expressed genes (DEGs) between OLP patients and healthy individuals. The functions and enriched pathways of the DEGs were identified. Sequencing dataset GSE70665 was then used to analyze the role of DEGs in the development of OLP to oral squamous cell carcinoma (OSCC). Oncomine and The Cancer Genome Atlas (TCGA) databases were utilized to evaluate clinicopathological characters of OSCC. Univariate and multivariate Cox regression models were used to identify independent prognostic factors. RESULTS: A total of 24 DEGs were identified between OLP and normal samples. FAM3B was under-expressed in OLP compared with normal samples and was further significantly downregulated in OSCC compared with OLP. Under-expression of FAM3B was significantly correlated with tumor stage and disease-specific survival (DSS), progression-free interval (PFI) and overall survival (OS) of OSCC patients. With univariate and multivariate Cox regression analysis, FAM3B was an independent prognostic factor. CONCLUSION: Under-expression of FAM3B was associated with the development and malignancy of OLP. FAM3B may serve as a potential prognostic biomarker for OLP.

Efficacy of mandibular molar distalization by clear aligner treatment. / æ— æ‰˜æ§½éšå½¢çŸ«æ²»å™¨è¿œç§»ä¸‹é¢Œç£¨ç‰™çš„ç–—æ•ˆ.

OBJECTIVES: At present, the research on clear aligner of molar distalization mainly focuses on the upper jaw, while the research on mandibular molars is few.This study aims to evaluate the therapeutic effect of mandibular molars distalization with clear aligner via cone beam CT (CBCT) and Dolphin software. METHODS: Twenty cases of mandibular molars with clear aligner were included according to the inclusion and exclusion criteria. CBCT was taken before treatment (T0) and when the first molar was moved in place (T1). Dolphin software was used to measure the effectiveness of molar distalization. Three-dimensional changes in direction and the impact on the incisors and facial soft and hard tissues were evaluated. RESULTS: The effective rates of crown and root distalization of the second and first mandibular molars were 74%, 49%, and 71%, 47%, respectively. The second and first molars were both the distal buccal cusp with the largest distalization [(2.15 ± 0.91) mm and (1.85±1.09) mm], respectively, with significant difference between the T0 and T1 (P<0.05). The second and first molars were accompanied by depression, distal tilt, and buccal tilt with 1.06 mm, 2.10°, 2.27°, and 0.91 mm, 1.62°, and 1.91°, respectively, with significant differences between the T0 and T1 (all P<0.05). There was no obvious difference between men and women. The mandibular central incisor showed a lip-side movement of 1.02 mm, a depression of 0.82 mm, a mesial incline of 0.66°, and a crown-lip torque of 1.51° after molar distalization, with significant differences between the T0 and T1 (all P<0.001). Only the lower lip thickness increased by 0.1 cm, the length of the lower lip increased by 0.1 cm, and the ANS-ME (distance from anterior nasal spine to submental point) decreased by 0.13 cm, with significant differences between the T0 and T1 (all P<0.05). CONCLUSIONS: Clear aligner can effectively move mandibular molars farther, the crown is more effective than the root, and it is tilted. The second mandibular molar is more effective than the first mandibular molar in its distant displacement and three-dimensional changes. Molar distalization causes minor changes in mandibular incisors and facial soft and hard tissues.

Phonon transport in graphene based materials.

Graphene, due to its atomic layer structure, has the highest room temperature thermal conductivity k for all known materials. Thus, it is expected that graphene based materials are the best candidates for thermal management in next generation electronic devices. In this perspective, we first review the in-plane k of monolayer graphene and multilayer graphene obtained using experimental measurements, theoretical calculations and molecular dynamics (MD) simulations. Considering the importance of four-phonon scattering in graphene, we also compare the effects of three-phonon and four-phonon scattering on phonon transport in graphene. Then, we review phonon transport along the cross-plane direction of multilayer graphene and highlight that the cross-plane phonon mean free path is several hundreds of nanometers instead of a few nanometers as predicted using classical kinetic theory. Recently, hydrodynamic phonon transport has been observed experimentally in graphitic materials. The criteria for distinguishing the hydrodynamic from ballistic and diffusive regimes are discussed, from which we conclude that graphene based materials with a high Debye temperature and high anharmonicity (due to ZA modes) are excellent candidates to observe the hydrodynamic phonon transport. In the fourth part, we review how to actively control phonon transport in graphene. Graphene and graphite are often adopted as additives in thermal management materials such as polymer nanocomposites and thermal interface materials due to their high k. However, the enhancement of the composite's k is not so high as expected because of the large thermal resistance between graphene sheets as well as between the graphene sheet and matrix. In the fifth part, we discuss the interfacial thermal resistance and analyze its effect on the thermal conductivity of graphene based materials. In the sixth part, we give a brief introduction to the applications of graphene based materials in thermal management. Finally, we conclude our review with some perspectives for future research.

Modification of thermal transport in few-layer MoS2 by atomic-level defect engineering.

Molybdenum disulfide (MoS2) has attracted significant attention due to its good charge carrier mobility, high on/off ratio in field-effect transistors and novel layer-dependent band structure, with potential applications in modern electronic, photovoltaic and valleytronic devices. Despite these advantages, its thermal transport property has often been neglected until recently. In this work, we probe phonon transport in few-layer MoS2 flakes with various point defect concentrations enabled by helium ion (He+) irradiation. For the first time, we experimentally show that Mo-vacancies greatly impede phonon transport compared to S-vacancies, resulting in a larger reduction of thermal conductivity. Furthermore, Raman characterization shows that the in-plane Raman-sensitive peak E2g1 was red-shifted with increasing defect concentration, corresponding to the gradual damage of the in-plane crystalline networks and the gradual reduction in the measured thermal conductivity. Our work provides a practical approach for atomic-level engineering of phonon transport in two-dimensional (2D) layered materials by selectively removing elements, thus holding potential applications in designing thermal devices based on various emerging 2D materials.

Anomalous hybridization complementation effect on phonon transport in heterogeneous nanowire cross junction.

Controlling phonon transport via its wave nature in nanostructures can achieve unique properties for various applications. In this paper, thermal conductivity of heterogeneous nano cross junction (hetero-NCJ) is studied through molecular dynamics simulation. It is found that decreasing or increasing the atomic mass of four side wires (SWs) severed as resonators, thermal conductivity of hetero-NCJ is enhanced, which is larger than that of homogeneous NCJ (homo-NCJ). Interestingly, by setting two SWs with larger atomic mass and other two SWs with smaller atomic mass, thermal conductivity of hetero-NCJ is abnormally decreased, which is even smaller than that of homo-NCJ. After further non-equilibrium Green's function calculations, it is demonstrated that origin of increase is attributed to the hybridization broken induced by unidirectional shift of resonant modes. However, the decrease in thermal conductivity originates from hybridization complementation induced by bidirectional shift of resonant modes, which synergistically blocks phonon transport. This work provides a mechanism for further strengthening resonant hybridization effect and manipulating thermal transport.

Thermo-mechanical correlation in two-dimensional materials.

Two-dimensional (2D) materials have received tremendous attention from the research community in the past decades, because of their numerous striking physical, chemical and mechanical properties and promising potential in a wide range of applications. This field is strongly interdisciplinary, requiring efficient integration of knowledge with different insights. In this review, we summarize the up-to-date research on the thermal and mechanical properties and thermo-mechanical correlation in 2D materials, including both theoretical and experimental insight. Firstly, the mechanical properties of 2D nanomaterials are discussed, in which the underlying physics is summarized. Then, we discuss the impacts of thermal fluctuation on the mechanical properties. Next, from experimental points of view, we present the methods to introduce strain in 2D materials experimentally and the experimental tools to measure the degree of strain. Finally, we discuss the fundamental phonon and thermal properties of 2D materials, including the strain effects on phonon dispersion, phonon hydrodynamic behavior, phonon topological feature, ballistic thermal conductance and diffusive thermal conductivity. This article presents an advanced understanding of the mechanical and thermal properties of 2D materials, which provides new opportunities for promoting their applications in nanoscale electronic, optoelectronic, and thermal functional devices.

Gate-Tunable Polar Optical Phonon to Piezoelectric Scattering in Few-Layer Bi2 O2 Se for High-Performance Thermoelectrics.

Atomically thin Bi2 O2 Se has emerged as a new member in 2D materials with ultrahigh carrier mobility and excellent air-stability, showing great potential for electronics and optoelectronics. In addition, its ferroelectric nature renders an ultralow thermal conductivity, making it a perfect candidate for thermoelectrics. In this work, the thermoelectric performance of 2D Bi2 O2 Se is investigated over a wide temperature range (20-300 K). A gate-tunable transition from polar optical phonon (POP) scattering to piezoelectric scattering is observed, which facilitates the capacity of drastic mobility engineering in 2D Bi2 O2 Se. Consequently, a high power factor of more than 400 µW m-1  K-2 over an unprecedented temperature range (80-200 K) is achieved, corresponding to the persistently high mobility arising from the highly gate-tunable scattering mechanism. This finding provides a new avenue for maximizing thermoelectric performance by changing the scattering mechanism and carrier mobility over a wide temperature range.