RESUMO
INTRODUCTION: Clear aligners (CAs) have recently become popular and widely used orthodontic appliances. Research on CA biomechanics has become a focal point in orthodontics to improve the efficiency of CA treatment and address challenging issues, such as extraction. The biomechanical characteristics of CAs in space closure have been reported. However, previous studies have mainly focused on static biomechanical analysis that cannot demonstrate the dynamic biomechanical changes in CAs during space-closing. Given that these biomechanical changes can be significant and have considerable clinical value, this study aimed to investigate these characteristics. METHODS: Sequential extraction space-closing models were derived from included patient data and refined using modeling and CA design software. A finite element analysis was performed to obtain biomechanical raw data. This study introduced a dual coordinate system and space geometry analysis to demonstrate the biomechanical properties accurately. RESULTS: As space closure progressed, the instantaneous tooth displacements increased, indicating an enhanced space closure force because of the increased strain in the CA extraction area. Meanwhile, the central axis of rotation of the anterior teeth continuously moved toward the labial-apical direction, showing a gradually enhanced vertical and torque control effect. CONCLUSIONS: During space closure, CAs undergo specific biomechanical changes, including increased contraction and control forces on both sides of the gap. These biomechanical effects are beneficial to alleviate the roller coaster effect gradually. Meanwhile, more reasonable staging design strategies can be proposed on the basis of this biomechanical mechanism.
Assuntos
Aparelhos Ortodônticos Removíveis , Técnicas de Movimentação Dentária , Humanos , Análise de Elementos Finitos , Incisivo , Aparelhos Ortodônticos , Fenômenos BiomecânicosRESUMO
INTRODUCTION: Compared with fixed treatments, clear aligners (CAs) have the advantages of comfort, esthetics, and hygiene, and are popular among patients and orthodontists. However, CAs exhibit control deficiencies in extraction patients because of insufficient root control and retention effects. These deficiencies can magnify biomechanical differences in bimaxillary dentition, further causing different orthodontic requirements between maxillary and mandibular dentition. This study aimed to elaborate on the biomechanical characteristics of bimaxillary dentition in extraction space closure and provided feasible biomechanical compensation strategies for use in clinical practice. METHODS: We constructed a 3-dimensional (3D) bimaxillary model based on patient data. Several 3D modeling-related software was used to generate a standard first premolar extraction model, CAs, and attachments. Subsequently, finite element analysis was performed to demonstrate the biomechanical effects. RESULTS: The maxillary and mandibular dentition showed a roller coaster effect during space closure. Compared with the maxillary dentition, the mandibular posterior teeth exhibited stronger relative anchorage causing greater anterior teeth retraction. The tipping and vertical movements of the anterior teeth were related to tooth length. The longer the anterior tooth, the less tipping and greater vertical displacement occurred. Generally, when having the same retraction distance, the mandibular dentition exhibited greater retroclination and fewer extrusions. Both mechanical and retention compensations should be considered to prevent these unwanted tipping movements. Adding specific attachments to bimaxillary dentitions compensated for the retention and root control deficiencies of CAs. CONCLUSIONS: When applying CAs to extraction patients, different biomechanical effects can present in the bimaxillary dentition because of specific dentition morphologies. To effectively treat these patients, mechanical compensation through overcorrection of the target position should be designed on the basis of bimaxillary control deficiencies, and retention compensation by adding specific attachments should also be considered according to the overcorrections.
Assuntos
Aparelhos Ortodônticos Removíveis , Técnicas de Movimentação Dentária , Humanos , Técnicas de Movimentação Dentária/métodos , Análise de Elementos Finitos , Estética Dentária , Mandíbula , Fenômenos BiomecânicosRESUMO
INTRODUCTION: Clear aligners (CAs) have attracted increasing attention from patients and orthodontists because of their excellent esthetics and comfort. However, treating tooth extraction patients with CAs is difficult because their biomechanical effects are more complicated than those of traditional appliances. This study aimed to analyze the biomechanical effect of CAs in extraction space closure under different anchorage controls, including moderate, direct strong, and indirect strong anchorage. It could provide several new cognitions for anchorage control with CAs through finite element analysis, further directing clinical practice. METHODS: A 3-dimensional maxillary model was generated by combining cone-beam computed tomography and intraoral scan data. Three-dimensional modeling software was used to construct a standard first premolar extraction model, temporary anchorage devices, and CAs. Subsequently, finite element analysis was performed to simulate space closure under different anchorage controls. RESULTS: Direct strong anchorage was beneficial for reducing the clockwise occlusal plane rotation, whereas indirect anchorage was conducive for anterior teeth inclination control. In the direct strong anchorage group, an increase in the retraction force would require more specific anterior teeth overcorrection to resist the tipping movement, mainly including lingual root control of the central incisor, followed by distal root control of the canine, lingual root control of the lateral incisor, distal root control of the lateral incisor, and distal root control of the central incisor. However, the retraction force could not eliminate the mesial movement of the posterior teeth, possibly causing a reciprocating motion during treatment. In indirect strong groups, when the button was close to the center of the crown, the second premolar presented less mesial and buccal tipping but more intrusion. CONCLUSIONS: The 3 anchorage groups showed significantly different biomechanical effects in both the anterior and posterior teeth. Specific overcorrection or compensation forces should be considered when using different anchorage types. The moderate and indirect strong anchorages have a more stable and single-force system and could be reliable models in investigating the precise control of future tooth extraction patients.
Assuntos
Procedimentos de Ancoragem Ortodôntica , Aparelhos Ortodônticos Removíveis , Análise de Elementos Finitos , Estética Dentária , Incisivo , Dente Pré-Molar/cirurgia , Maxila , Técnicas de Movimentação Dentária/métodos , Fenômenos BiomecânicosRESUMO
BACKGROUND: Clear aligner (CA) treatment has been gaining popularity, but the biomechanical effects of CAs in bimaxillary dentition have not been thoroughly investigated. Direct and indirect strong anchorages are two common anchorage control methods, but the underlying biomechanical mechanism has not yet been elucidated. This study aimed to investigate the different biomechanical effects of CAs in closing the bimaxillary space under different anchorage controls, further instructing the compensation strategies design and strong anchorage choice in clinical practice. METHODS: Three-dimensional (3D) bimaxillary models of different anchorage controls were created based on cone-beam computed tomography and intraoral scan data. Four first premolars were extracted using 3D modeling software. Finite element analysis was conducted to simulate the space closure process of the CAs. RESULTS: In the two strong anchorage groups, the bimaxillary dentition presented different movement patterns during the space closure process, and the lower dentition was more vulnerable to elastic force. From the vertical view, direct strong anchorage with elastic force had the advantage of flattening the longitudinal occlusal curve and resisting the roller-coaster effects, whereas indirect strong anchorage could lead to a deep longitudinal occlusal curve. From the sagittal view, indirect strong anchorage with metallic ligaments had a greater instantaneous anchorage protection effect, particularly in the lower dentition, which reduced the mesial movement of the posterior teeth by nearly four times that of the direct anchorage group. In addition, indirect strong anchorage presented better anterior teeth torque/tipping control, while direct strong anchorage could aggravate lingual tipping of the upper central incisors. Due to the differences in anterior-posterior anchorage and arch shape, compared with the upper dentition, anchorage preservation and vertical control effects were amplified in the lower dentition. CONCLUSIONS: The biomechanical effects of CAs differed between the two strong anchorage groups. Due to the differences in dentition morphology, anterior-posterior anchorage, and dental arch shape, CAs present different biomechanical effects in bimaxillary space closure. Orthodontists should consider the corresponding mechanical compensation according to specific anchorage control methods and dentitions.
Assuntos
Aparelhos Ortodônticos Removíveis , Técnicas de Movimentação Dentária , Humanos , Análise de Elementos Finitos , Técnicas de Movimentação Dentária/métodos , Incisivo , Dente Pré-Molar , Fenômenos BiomecânicosRESUMO
Bone is a complex tissue that undergoes constant remodeling to maintain homeostasis, which requires coordinated multilineage differentiation and proper proliferation of mesenchymal stromal cells (MSCs). Mounting evidence indicates that a disturbance of bone homeostasis can trigger degenerative bone diseases, including osteoporosis and osteoarthritis. In addition to conventional genetic modifications, epigenetic modifications (i.e., DNA methylation, histone modifications, and the expression of noncoding RNAs) are considered to be contributing factors that affect bone homeostasis. Long noncoding RNAs (lncRNAs) were previously regarded as 'transcriptional noise' with no biological functions. However, substantial evidence suggests that lncRNAs have roles in the epigenetic regulation of biological processes in MSCs and related diseases. In this review, we summarized the interactions between lncRNAs and epigenetic modifiers associated with osteo-/adipogenic differentiation of MSCs and the pathogenesis of degenerative bone diseases and highlighted promising lncRNA-based diagnostic and therapeutic targets for bone diseases.
RESUMO
BACKGROUND: The role of occlusal factors on the occurrence of temporomandibular joint disorders (TMDs) is still unclear and it is tricky for orthodontists to treat malocclusions in patients with TMDs. We report the case of the second orthodontic treatment of an adult female with Class II division 2 malocclusion associated with TMD. With the removal of anterior occlusal interference, TMD symptoms were alleviated and cone beam computed tomography (CBCT) images showed the bilateral condyles shifted forward. CASE SUMMARY: This case report presented an orthodontic retreatment of an adult female with TMD and mandibular backward positioning based on CBCT examination and Joint Space Index (JSI) analysis. The left and right JSI values of -38.5 and -52.6 indicated that the position of bilateral condyles had posterior displacement. Ten years prior to this evaluation, she underwent orthodontic treatment resulting in the extraction of two upper premolars and one lower central incisor. The joint symptoms, including pain and sounds, were alleviated along with verified mandibular forward repositioning by extraction of another lower central incisor. CONCLUSION: Mandibular backward positioning could be associated with TMD. JSI analysis based on CBCT is a convenient way to examine condylar positions quantitatively.
RESUMO
Early orthodontic intervention remains a controversial notion in current dental care regime. Whilst early orthodontic treatment for children is the province for orthodontic specialists, a growing number of general practitioners, who may not possess sufficient specialty knowledge, are also involved, raising the concerns about the propriety and quality of their treatment modalities. However, orofacial development of children and adolescents is in a very complicated environment. Comprehensive theoretical knowledge and a great wealth of practical experience are required to ensure the final treatment effect. The possible complications should be kept under control and fully informed to patients and their parents. In order to unify and standardize early orthodontic treatment protocol and help to promote healthy and orderly development of early orthodontic treatment, this consensus summarized the practical experience of orthodontic experts from many famous colleges and affiliated hospitals for clinical reference.
Assuntos
Má Oclusão , Ortodontia , Adolescente , Consenso , Assistência Odontológica , Humanos , Má Oclusão/diagnóstico , Má Oclusão/terapia , PaisRESUMO
Biomimetic modification of hydroxyapatite on a polymer surface is a potent strategy for activating biological functions in bone tissue engineering applications. However, the polymer surface is bioinert, and it is difficult to introduce a uniform calcium phosphate (CaP) layer. To overcome this limitation, we constructed a specific nano-topographical structure onto a poly(ε-caprolactone) substrate via surface-directed epitaxial crystallization. Formation of the CaP layer on the nano-topological surface was enhanced by 2.34-fold compared to that on a smooth surface. This effect was attributed to the abundant crystallization sites for CaP deposition because of the increased surface area and roughness. Bone marrow mesenchymal stromal cells (BMSCs) were used to examine the biological effect of biomineralized surfaces. We clearly demonstrated that BMSCs responded to surface biomineralization. Osteogenic differentiation and proliferation of BMSCs were significantly promoted on the biomineralized nano-topological surface. The expression of alkaline phosphatase and osteogenic-related genes as well as extracellular matrix mineralization was significantly enhanced. The proposed strategy shows potential for designing bone repair scaffolds.
RESUMO
Porphyromonas gingivalis (P. gingivalis), a Gram-negative oral anaerobe, is considered to be a major pathogenic agent involved in the onset and progression of chronic periodontitis. P. gingivalis must be able to perceive and respond to the complicated changes in host to survive the environmental challenges, in which the two-component signal transduction systems (TCSs) play critical roles by connecting input signals to cellular physiological output. Canonical TCS consists of a sensor histidine kinase and a cognate response regulator that functions via a phosphorylation cascade. In this review, the roles of TCSs in P. gingivalis were demonstrated by illustrating the target genes and modulation modes, which may help elucidate the underlying mechanisms in future studies.
Assuntos
Porphyromonas gingivalis , Transdução de Sinais , FosforilaçãoRESUMO
Orthodontic treatment is a time-consuming process whose duration usually takes 2-3 years. In general, long-term treatment duration possesses higher risks of complications, which may have adverse impact on patients. Therefore, exploring safe and effective adjunctive interventions to accelerate orthodontic tooth movement and shortening the treatment duration are of profound clinical significance. Currently, numerous adjunctive interventions have been generated and developed to accelerate orthodontic tooth movement, which can be divided into two main categories: surgical and non-surgical. However, an intervention that is widely accepted as a routine practice in orthodontic clinic is lacking. This article aims to review com-mon adjunctive interventions used to accelerate orthodontic tooth movement. This review can be used as a basis to guide clinical practice, shorten treatment duration, and improve patients' prognosis.
Assuntos
Técnicas de Movimentação Dentária , HumanosRESUMO
Centric relation (CR) is one of the core research contents in orthodontics, prosthodontics, and gnathology, acting as an important physiological factor in reconstructing the occlusion and adjusting the occlusal relationship. For over a century, CR is still a controversial subject in dentistry. CR has been redefined for several times, and recently, its application has been widened in orthodontics, including orthodontic diagnosis, clinical examination and analysis, and treatment goals. The purpose of this article is to review the definition of CR, its relationship with malocclusion, and the application of this relationship in orthodontic treatment.
Assuntos
Oclusão Dentária Central , Má Oclusão , Relação Central , Assistência Odontológica , Humanos , Ortodontia CorretivaRESUMO
Circular RNAs (circRNAs), novel endogenous non-coding RNAs with the special circular structure, have been found to play critical roles in various development of tissues and diseases. However, few studies have focused on the functions and mechanisms of circRNAs in the osteogenesis of human adipose-derived stem cells (hASCs). Here, we performed the circRNAs sequencing and bioinformatic analysis to investigate the expression profiles of hASCs during osteogenic differentiation. There were 150 upregulated circRNAs and 60 downregulated circRNAs expressed differentially. Among them, the expression of circPOMT1 and circMCM3AP were downregulated during the osteogenesis of hASCs. hsa-miR-6881-3p could promote the osteogenic differentiation of hASCs, while the expression of circPOMT1 and circMCM3AP were negatively correlated with it. Smad6 and Chordin, critical inhibitors of the BMPs signaling pathway, were predicted to be the targets of hsa-miR-6881-3p. Therefore, circPOMT1 and circMCM3AP might influence the osteogenic differentiation of hASCs by targeting hsa-miR-6881-3p via BMPs signaling pathway. CircPOMT1 and circMCM3AP are potential novel targets for the repairment of bone defects.
RESUMO
Until now, the classification system of oral epithelial dysplasia is still based on the architectural and cytological changes, which relies on the observation of pathologists and is relatively subjective. The purpose of present research was to discriminate the oral dysplasia by the near-infrared Raman spectroscope, in order to evaluate the classification system. We collected Raman spectra of normal mucosa, oral squamous cell carcinoma (OSCC) and dysplasia by near-infrared Raman spectroscope. The biochemical variations between different stages were analyzed by the characteristic peaks in the subtracted mean spectra. Gaussian radial basis function support vector machines (SVM) were used to establish the diagnostic models. At the same time, principal component analysis (PCA) and linear discriminant analysis (LDA) were used to verify the results of SVM. Raman spectral differences were observed in the range between 730~1913 cm-1. Compared with normal mucosa, high contents of protein and DNA in oral dysplasia and OSCC were observed. There were no significant or gradual variation of Raman peaks among different dysplastic grades. The accuracies of comparison between mild, moderate, severe dysplasia with OSCC were 100%, 44.44%, 71.15%, which elucidated the low modeling ability of support vector machines, especially for the moderate dysplasia. The analysis by PCA-LDA could not discriminate the stages, either. Combined with support vector machines, near-infrared Raman spectroscopy could detect the biochemical variations in oral normal, OSCC and dysplastic tissues, but could not establish diagnostic model accurately. The classification system needs further improvements.
RESUMO
The aim of this study was to evaluate and compare the colour stabilities of three types of orthodontic clear aligners exposed to staining agents in vitro. Sixty clear orthodontic aligners produced by three manufacturers (Invisalign, Angelalign, and Smartee) were immersed in three staining solutions (coffee, black tea, and red wine) and one control solution (distilled water). After 12-h and 7-day immersions, the aligners were washed in an ultrasonic cleaner and measured with a colourimeter. The colour changes (ΔE*) were calculated on the basis of the Commission Internationale de I'Eclairage L*a*b* colour system (CIE L*a*b*), and the results were then converted into National Bureau of Standards (NBS) units. Fourier transformation infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were conducted to observe the molecular and morphologic alterations to the aligner surfaces, respectively. The three types of aligners exhibited slight colour changes after 12 h of staining, with the exception of the Invisalign aligners stained with coffee. The Invisalign aligners exhibited significantly higher ΔE* values (ranging from 0.30 to 27.81) than those of the Angelalign and Smartee aligners (ΔE* values ranging from 0.33 to 1.89 and 0.32 to 1.61, respectively, P<0.05). FT-IR analysis confirmed that the polymer-based structure of aligners did not exhibit significant chemical differences before and after the immersions. The SEM results revealed different surface alterations to the three types of aligner materials after the 7-day staining. The three types of aesthetic orthodontic appliances exhibited colour stability after the 12-h immersion, with the exception of the Invisalign aligners stained by coffee. The Invisalign aligners were more prone than the Angelalign and Smartee aligners to pigmentation. Aligner materials may be improved by considering aesthetic colour stability properties.
Assuntos
Café , Cor , Chá , Descoloração de Dente , Teste de Materiais , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
OBJECTIVES: This study aims to determine the effectiveness of a messaging app (WeChat) in improving patients' compliance and reducing the duration of orthodontic treatment (DOT). MATERIALS AND METHODS: A randomized controlled trial was performed in a dental hospital and a clinic from August 2012 to May 2015. Orthodontic patients were included at the beginning of treatment. Patients with multiphase treatment or braceless technique were excluded. Participants were randomized to WeChat group (received regular reminders and educational messages) or control group (received conventional management) and were followed up until the treatment was completed. Primary outcome measure was DOT. Others were late and failed attendance, bracket bond failure, and oral hygiene condition. RESULTS: One hundred twelve patients in each group participated and completed the trial. DOT in WeChat group were 7.3 weeks shorter (P = 0.007). There were less failed attendance (3.1 vs. 10.9 %, P < 0.001), late attendance (20.1 vs. 29.9 %, P < 0.001), and bracket bond failure (11.8 vs. 16.1 %, P < 0.001) in WeChat group than control. There was no difference in orthodontic plaque index nor modified gingivitis index between the two groups before and after treatment. Number of failed attendances was identified as an independent factor affecting DOT (P = 0.004; HR = 0.89, 95 % CI 0.84 to 0.95). CONCLUSIONS: The intervention with WeChat is effective in reducing the treatment duration and bracket bond failure, and improving the attendance in orthodontic patients. CLINICAL RELEVANCE: DOT can be reduced by improving patient's compliance. The messaging app is useful for outpatient education and management.
Assuntos
Aplicativos Móveis , Ortodontia Corretiva , Cooperação do Paciente , Adolescente , Adulto , China , Feminino , Humanos , Masculino , Fatores de TempoRESUMO
Bone remodeling is balanced by bone formation and bone resorption as well as by alterations in the quantities and functions of seed cells, leading to either the maintenance or deterioration of bone status. The existing evidence indicates that microRNAs (miRNAs), known as a family of short non-coding RNAs, are the key post-transcriptional repressors of gene expression, and growing numbers of novel miRNAs have been verified to play vital roles in the regulation of osteogenesis, osteoclastogenesis, and adipogenesis, revealing how they interact with signaling molecules to control these processes. This review summarizes the current knowledge of the roles of miRNAs in regulating bone remodeling as well as novel applications for miRNAs in biomaterials for therapeutic purposes.
Assuntos
Remodelação Óssea/fisiologia , MicroRNAs/fisiologia , Animais , Linhagem da Célula , Humanos , Osteoblastos/citologia , Transcrição GênicaRESUMO
OBJECTIVE: To detect the expression of growth factors relating to bone reconstructions in microscrew-bone interface of implanted titanium microscrews near the extraction wounds, and to determine the influence of healing process on the growth factors. METHODS: Eight male Beagle dogs (age 18 months) were divided into experimental and control groups. Titanium microscrews were implanted near an extraction wound in the dogs in the experimental group, while the controls had implantation without extraction wounds. The dogs were sacrificed at 1, 3, 8, 12 weeks, respectively. Immunohistochemistry and in situ hybridization sections were performed to detect the expression of TGF-beta, TNF-alpha, osteocalcin (OC) protein and Cbfal mRNA. RESULTS: The experimental group had higher levels of expression of TGF-beta, TNF-alpha protein and Cbfa1 mRNA than the controls, with significant differences appearing at week one for TNF-alpha (P<0.05), week three for TGF-beta and TNF-alpha (P<0.05), and week eight for Cbfa1 mRNA (P<0.05). The expression of OC increased over time and reached peak at week eight (P<0.05). CONCLUSION: Microscrews implanted near extraction wounds can maintain stability. Severe inflammation occurs in the early stage of healing, but does not sustain. Bone remodeling remains active over the healing process. But prolonged healing phase without force loading could weaken the remodeling.
Assuntos
Parafusos Ósseos , Osso e Ossos/metabolismo , Titânio , Cicatrização , Animais , Remodelação Óssea , Subunidade alfa 1 de Fator de Ligação ao Core/metabolismo , Cães , Masculino , Osteocalcina/metabolismo , Fator de Crescimento Transformador beta/metabolismo , Fator de Necrose Tumoral alfa/metabolismoRESUMO
OBJECTIVES: The purpose of this study was to assess the prevalence, distribution, and intensity of dental caries in the Iron Age population of northern China in order to increase knowledge about the type of food, dietary habit, and social stratification in this Iron Age people. MATERIALS AND METHODS: The samples analyzed were dental remains of 1548 permanent teeth from 69 male individuals unearthed from the Qin archaeological site of Emperor Qinshihuang's Mausoleum in Lintong (northern China). The sex and the age-at-death of the samples were estimated. RESULTS: Overall frequency of antemortem tooth loss in the samples was 0.8%. The proportion of individuals with at least one carious tooth was 65.2%, and the frequency of carious lesions was 9.4%, both showing a trend to rise as age increased. Data obtained on dental caries and antemortem tooth loss provided a corrected rate of 9.5% of teeth with caries. The most frequent carious lesions were occlusal lesions (2.6%), followed by interproximal (2.5%) and buccal/lingual lesions (1.0%). Tooth type analysis showed that molars had the highest percentage of caries (18.6%), followed by premolars (4.5%), canines (3.0%), and incisors (3.0%). The total SRCI was 1.6, increasing with age. CONCLUSIONS: These findings indicate that dental caries may be related, at least in part, to the subsistence and diet of this Iron Age population.
Assuntos
Cárie Dentária/história , China/epidemiologia , Cárie Dentária/epidemiologia , História Antiga , Humanos , Masculino , Paleodontologia , PrevalênciaRESUMO
This study aimed to assess the reliability of experienced Chinese orthodontists in evaluating treatment outcome and to determine the correlations between three diagnostic information sources. Sixty-nine experienced Chinese orthodontic specialists each evaluated the outcome of orthodontic treatment of 108 Chinese patients. Three different information sources: study casts (SC), lateral cephalometric X-ray images (LX) and facial photographs (PH) were generated at the end of treatment for 108 patients selected randomly from six orthodontic treatment centers throughout China. Six different assessments of treatment outcome were made by each orthodontist using data from the three information sources separately and in combination. Each assessment included both ranking and grading for each patient. The rankings of each of the 69 judges for the 108 patients were correlated with the rankings of each of the other judges yielding 13 873 Spearman rs values, ranging from -0.08 to +0.85. Of these, 90% were greater than 0.4, showing moderate-to-high consistency among the 69 orthodontists. In the combined evaluations, study casts were the most significant predictive component (R(2)=0.86, P<0.000 1), while the inclusion of lateral cephalometric films and facial photographs also contributed to a more comprehensive assessment (R(2)=0.96, P<0.000 1). Grading scores for SC+LX and SC+PH were highly significantly correlated with those for SC+LX+PH (r(SC+LX)vs.(SC+LX+PH)=0.96, r(SC+PH)vs.(SC+LX+PH)=0.97), showing that either SC+LX or SC+PH is an excellent substitute for all three combined assessment.
Assuntos
Ortodontia/normas , Revisão dos Cuidados de Saúde por Pares/normas , Adolescente , Cefalometria/normas , China , Estética Dentária , Feminino , Humanos , Masculino , Má Oclusão Classe I de Angle/terapia , Má Oclusão Classe II de Angle/terapia , Má Oclusão Classe III de Angle/terapia , Modelos Dentários/normas , Fotografação/normas , Reprodutibilidade dos Testes , Resultado do TratamentoRESUMO
INTRODUCTION: Orthodontics in China has developed rapidly, but there is no standard index of treatment outcomes. We assessed the validity of the American Board of Orthodontics Objective Grading System (ABO-OGS) for the classification of treatment outcomes in Chinese patients. METHODS: We randomly selected 108 patients who completed treatment between July 2005 and September 2008 in 6 orthodontic treatment centers across China. Sixty-nine experienced Chinese orthodontists made subjective assessments of the end-of-treatment casts for each patient. Three examiners then used the ABO-OGS to measure the casts. Pearson correlation analysis and receiver operating characteristic curve analysis were conducted to evaluate the correspondence between the ABO-OGS cast measurements and the orthodontists' subjective assessments. RESULTS: The average subjective grading scores were highly correlated with the ABO-OGS scores (r = 0.7042). Four of the 7 study cast components of the ABO-OGS score-occlusal relationship, overjet, interproximal contact, and alignment-were statistically significantly correlated with the judges' subjective assessments. Together, these 4 accounted for 58% of the variability in the average subjective grading scores. The ABO-OGS cutoff score for cases that the judges deemed satisfactory was 16 points; the corresponding cutoff score for cases that the judges considered acceptable was 21 points. CONCLUSIONS: The ABO-OGS is a valid index for the assessment of treatment outcomes in Chinese patients. By comparing the objective scores on this modification of the ABO-OGS with the mean subjective assessment of a panel of highly qualified Chinese orthodontists, a cutoff point for satisfactory treatment outcome was defined as 16 points or fewer, with scores of 16 to 21 points denoting less than satisfactory but still acceptable treatment. Cases that scored greater than 21 points were considered unacceptable.