Structural Comparisons, Fluorescence Properties, and Glass-to-Crystal Transformations of Heat-Cooled and Melt-Quenched Zeolitic Imidazolate Framework Glass.

As a representative of zeolitic imidazolate framework glass, agZIF-62 has been reported to be synthesized using a melt-quenching method in which the ZIF-62 crystal is heated to a temperature above the melting point. Interestingly, we unexpectedly found that agZIF-62 can also be synthesized by simple heating at temperatures lower than the melting point, which may be assisted by the release of encapsulated solvent molecules. The structural differences between melt-quenched agZIF-62 (MQ-agZIF-62) and heat-cooled agZIF-62 (HC-agZIF-62) were investigated. The results indicated that MQ-agZIF-62 is closer to the liquid state, while HC-agZIF-62 is closer to the crystal state. Interestingly, their luminescent emissions exhibit significant differences. Compared with the ZIF-62 crystal, MQ-agZIF-62 showed a blue-shift of 14 nm, whereas HC-agZIF-62 showed a red-shift of 9 nm. The emission intensity of agZIF-62 is also significantly stronger than that of ZIF-62; thus, rapid semiquantitative detection of the content of the MOF glass in glass and crystal mixtures can be achieved. In addition, HC-agZIF-62 and MQ-agZIF-62 can transform into ZIF-62 crystals via a solvent-media mechanism. This study provides new insights into ZIF-62 glass.

Construction of binary metal-organic cage-based materials via a "covalently linked plus cage encapsulated" strategy.

A strategy for constructing binary metal-organic cage (MOC)-based materials was developed. The cationic MOCs were covalently linked by organic linkers to a cationic extended network, whereas the anionic MOCs acted as counterions and were encapsulated in the network. Compared with the corresponding unary materials, the binary MOC-based materials exhibited improved porosity and adsorption performance.

Metal-organic framework derived heterostructured phosphide bifunctional electrocatalyst for efficient overall water splitting.

Developing high active and stable cost-effective bifunctional electrocatalysts for overall water splitting to produce hydrogen is of vital significance in clean and sustainable energy development. This work has prepared a novel porous unreported MOF (Ni-DPT) as a precursor to successfully synthesize a non-noble bifunctional NiCoP/Ni12P5@NF electrocatalyst through doping strategy and interface engineering. This catalyst is constructed by layered self-supporting arrays with heterojunction interface and rich nitrogen-phosphorus doping. Structural characterizations and the density function theory (DFT) calculations confirm that the interface effect of NiCoP/Ni12P5 heterojunction can regulate the electronic structure of the catalyst to optimize the Gibbs free energy of hydrogen (ΔGH*); simultaneously, the defect-rich layered nanoarrays can expose more active sites, shorten mass transfer distance, and generate a self-supporting structure for in-situ reinforcing the structural stability. As a result, this NiCoP/Ni12P5@NF catalyst exhibits favorable electrocatalytic performance, which simply needs overpotentials of 100 mV for HER and 310 mV for OER, respectively, at a current density of 10 mA·cm-2. The anion exchange membrane electrolyzer assembled with this NiCoP/Ni12P5@NF as both anode and cathode catalysts can operate stably for 200 h at a current density of 100 mA·cm-2 with an insignificant voltage decrease. This work may provide some inspiration for the further rational design of inexpensive non-noble multifunctional electrocatalysts and electrode materials for water splitting to generate hydrogen.

Hierarchical porous amorphous metal-organic frameworks constructed from ZnO/MOF glass composites.

For the first time, hierarchical porous amorphous metal-organic frameworks (HP-aMOFs) containing ultramicropores, micropores, and mesopores were synthesized by etching a composite of MOF glass (agZIF-76) and ZnO using ammonia. These materials show potential applications in the adsorption of C2 hydrocarbons.

Iodine Adsorption-Desorption-Induced Structural Transformation and Improved Ag+ Turn-On Luminescent Sensing Performance of a Nonporous Eu(III) Metal-Organic Framework.

Posttreatment of pristine metal-organic frameworks (MOFs) with suitable vapor may be an effective way to regulate their structures and properties but has been less explored. Herein, we report an interesting example in which a crystalline nonporous Eu(III)-MOF was transferred to a porous amorphous MOF (aMOF) via iodine vapor adsorption-desorption posttreatment, and the resulting aMOF showed improved turn-on sensing properties with respect to Ag+ ions. The crystalline Eu-MOF, namely, Eu-IPDA, was assembled from Eu(III) and 4,4'-{4-[4-(1H-imidazol-1-yl)phenyl]pyridine-2,6-diyl}dibenzoic acid (H2IPDA) and exhibited a two-dimensional (2D) coordination network based on one-dimensional secondary building blocks. The close packing of the 2D networks gives rise to a three-dimensional supramolecular framework without any significant pores. Interestingly, the nonporous Eu-IPDA could absorb iodine molecules when Eu-IPDA crystals were placed in iodine vapor at 85 °C, and the adsorption capacity was 1.90 g/g, which is comparable to those of many MOFs with large BET surfaces. The adsorption of iodine is attributed to the strong interactions among the iodine molecule, the carboxy group, and the N-containing group and leads to the amorphization of the framework. After immersion of the iodine-loaded Eu-IPDA in EtOH, approximately 89.7% of the iodine was removed, resulting in a porous amorphous MOF, denoted as a-Eu-IPDA. In addition, the remaining iodine in the a-Eu-IPDA framework causes strong luminescent quenching in the fluorescence emission region of the Eu(III) center when compared with that in Eu-IPDA. The luminescence intensity of a-Eu-IPDA in water suspensions was significantly enhanced when Ag+ ions were added, with a detection limit of 4.76 × 10-6 M, which is 1000 times that of pristine Eu-IPDA. It also showed strong anti-interference ability over many common competitive metal ions and has the potential to sense Ag+ in natural water bodies and traditional Chinese medicine preparations. A mechanistic study showed that the interactions between Ag+ and the absorbed iodine, the carboxylate group, and the N atoms all contribute to the sensing performance of a-Eu-IPDA.

Porous amorphous metal-organic frameworks based on heterotopic triangular ligands for iodine and high-capacity dye adsorption.

The research on amorphous metal-organic frameworks (aMOFs) is still in its infancy, and designing and constructing aMOFs with functional pores remains a challenge. Two aMOFs based on Co(II) and heterotopic triangular ligands with large conjugated aromatic planes, namely aMOF-1 and aMOF-2, were constructed and characterized by IR, XPS, EA, ICP, XANS and so on. aMOF-1 possesses mesopores, whereas aMOF-2 possesses micropores. The porosity, conjugated aromatic plane and uncoordinated N atoms in the framework allow these aMOFs to adsorb iodine and dyes. The iodine adsorption capacity of aMOF-1 is 3.3 g per g, which is higher than that of aMOF-2 (0.56 g per g), mainly due to the expansion or swelling of aMOF-1 after iodine adsorption. The uptake of cationic dyes by aMOF-2 showed more rapid kinetics and a higher removal rate than that by aMOF-1, mainly due to the difference in the porosity and surface charge. Although the surface charges of aMOF-1 and aMOF-2 are negative, both of them showed significantly faster adsorption kinetics toward anionic dyes, among which methyl orange (MO) and Congo red (CR) can be removed in 5 min. This occurs possibly because the quick adsorption of Na+ ions alters the surface charge of the framework and promotes dye uptake. The adsorption capacities of aMOF-1 for MO and CR reached 921 and 2417 mg g-1, respectively. The correlation data for aMOF-2 are 1042 and 1625 mg g-1, respectively. All adsorption capacities are among the highest compared to many cMOFs. Adsorption in mixed dye solution is found to be charge-dependent, kinetic-dependent, and synergetic in these systems. The porosity, surface charge regulation during adsorption, weak interactions and multiple adsorption processes contribute to the dye adsorption performance.

Encapsulation of a metal-organic cage-based porous salt in silica nanopores.

A metal-organic cage (MOC)-based porous salt composed of cationic Zr-MOC and anionic Cu-MOC was incorporated into SBA-15 nanopores via a two-step impregnation method for the first time. The encapsulated MOC-based porous salt showed improved iodine adsorption capacity when compared with the bulk sample.

A mixed-ligand Co(II) MOF synthesized from a single organic ligand to capture iodine and methyl iodide vapour.

Mixed-ligand metal-organic frameworks (MOFs) are usually synthesized from two or more organic ligands as initial reactants, and MOFs synthesized from one organic ligand precursor through partial in situ reactions remain very limited. Herein, by introducing an imidazole-tetrazole bifunctional ligand, 5-(4-imidazol-1-yl-phenyl)-2H-tetrazole (HIPT), as a single ligand and performing in situ hydrolysis of the tetrazolium group, a mixed-ligand Co(II)-MOF based on HIPT and 4-imidazol-1-yl-benzoic acid (HIBA), [Co2(µ3-O)(IPT)(IBA)]·x solvent (Co-IPT-IBA), was constructed and applied to capture I2 and methyl iodide vapours. Single crystal structural analyses reveal that Co-IPT-IBA exhibits a 3D porous framework with 1D channels based on the relatively few reported ribbon-like rod SBUs. The nitrogen adsorption-desorption isotherms indicate that the BET surface area of Co-IPT-IBA is 168.5 m2 g-1 and it possesses both micropores and mesopores. Due to its porosity, nitrogen-rich conjugated aromatic rings, and Co(II) ions, Co-IPT-IBA was applied to capture iodine molecules in vapour and exhibited an adsorption capacity of 2.88 g g-1. By combining the IR, Raman, XPS and grand canonical Monte Carlo (GCMC) simulation results, it was deduced that the tetrazole ring, coordination water molecules, and the redox potential of Co3+/Co2+ facilitate iodine capture. The presence of mesopores was also responsible for the high iodine adsorption capacity. In addition, Co-IPT-IBA showed the ability to capture methyl iodide in vapours with a moderate capacity of 625 mg g-1. The transformation of crystalline Co-IPT-IBA to amorphous MOFs may be due to the methylation reaction. This work represents a relatively rare example of methyl iodide adsorption by MOFs.

Metal-organic framework derived FeNi alloy nanoparticles embedded in N-doped porous carbon as high-performance bifunctional air-cathode catalysts for rechargeable zinc-air battery.

Developing efficient and durable bifunctional air-cathode catalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is one of the key efforts promoting the practical rechargeable zinc-air batteries (ZABs). In this paper, high-performance bifunctional air-cathode catalysts by a two-step strategy: atomically dispersed Ni on N-doped carbon is first derived from MOF to form uniformly dispersed NiNC, which are pyrolyzed together with Fe source at different high-temperatures to form FeNi@NC-T (T = 800, 900, and 1000 °C) catalysts. The as-synthesized non-noble metal FeNi@NC-900 catalyst exhibits a considerably small potential gap (ΔE) of 0.72 V between ORR and OER, which is as the same as commercial noble metal Pt/C + Ir black mixed catalyst. The performance of the ZABs using FeNi@NC-900 as the air-cathode catalyst displays a power density of 119 mW·cm-2 and a specific capacity of 830.1 mAh·g-1, which is superior to that of Pt/C + Ir black mixed catalyst. This work provides a guideline for designing alloy electrocatalysts with uniform size and nanoparticle distribution for metal-air batteries with bifunctional air-cathodes.

Regulating the Porosity and Iodine Adsorption Properties of Metal-Organic Framework Glass via an Ammonia-Immersion Approach.

Metal-organic framework (MOF) glass is a new type of glass material, but it usually lacks sufficient porosity. Thus, regulating the pore structure of MOF glass to improve its adsorption performance is very important. Herein, we found that the porosity of MOF glasses agZIF-62 and agZIF-76 can be regulated via an ammonia-immersion approach. After ammonia immersion, the resulting agZIF-62-NH3 and agZIF-76-NH3 could be maintained in their glass states or converted to their amorphous states, respectively. Their porosity changed according to the gas adsorption experiments. Notably, compared with agZIF-62 and agZIF-76, the iodine uptake capacities for agZIF-62-NH3 and agZIF-76NH3 increased by 12 and 21 times, respectively. This work shows that the subsequent treatment of MOF glass can regulate their adsorption performance.

Strategies for the Construction of Functional Materials Utilizing Presynthesized Metal-Organic Cages (MOCs).

Metal-organic cages (MOCs) that assemble from metal ions or metal clusters and organic ligands have attracted the interest of the scientific community because of their various functional coordination cavities. Unlike metal-organic frameworks (MOFs) with infinite frameworks, MOCs have discrete structures, making them soluble and stable in certain solvents and facilitating their application as starting reagents in the further construction of single components or composite materials. In recent years, increasing progress has been made in this field. In this review, we introduce these works from the perspective of design strategies, and focus on how presynthesized MOCs can be used to construct functional materials. Finally, we discuss the challenges and development prospects in this field.

Fabrication of cellulose derivative coated spherical covalent organic frameworks as chiral stationary phases for high-performance liquid chromatographic enantioseparation.

Porous spherical silica-based chiral stationary phases (CSPs) have been commercially used in the field of chiral separation, however, the scope of their application is, to some extent, limited by the instability of silica towards mobile phase containing strong base or acid. As such, developing new matrix-based CSPs is one of the effective strategies to overcome this bottleneck in studies of chiral separation materials. In this work, we have demonstrated that stable spherical covalent organic frameworks (SCOFs) can be utilized as matrixes for the fabrication of new CSPs for the first time. Specifically, a porous imine-linked SCOF with good crystallinity, large surface area, and high chemical stability is synthesized at room temperature. Then, cellulose-tris (3,5-dimethylphenylcarbamate) (CDMPC), a typical cellulose derivative, is selected as a potential chiral selector and coated onto the robust SCOFs, giving rise to the fabrication of new CDMPC@SCOF CSPs. The as-synthesized stable SCOF-based CSPs are exploited for high-performance liquid chromatographic (HPLC) enantioseparation, showing high resolution abilities for the separation of racemic compounds such as metalaxyl, 1-(1-naphthalenyl)ethanol, epoxiconazol, trans-stilbene oxide, and so on. Moreover, the prepared SCOF-based CSPs exhibit more superior acid and base stability than those of the silica-based CSPs. Our work not only uncovers the great potential of SCOFs as matrixes for constructing novel CSPs, but also expands the application of COFs in the field of enantiomeric separation under harsh base and acid conditions.

Amorphous metal-organic frameworks obtained from a crystalline precursor for the capture of iodine with high capacities.

Two amorphous metal-organic frameworks (aMOFs) were obtained from crystalline Co-MOF (SCNU-Z6) via temperature-induced (aT-SCNU-Z6) and water-immersed (aW-SCNU-Z6) approaches. They exhibited high iodine uptake, with the adsorption capacities of aT-SCNU-Z6 and aW-SCNU-Z6 reaching 2.05 and 5.04 g g-1, respectively. This work is the first report of iodine uptake by aMOFs.

Covalent Cross-Linking of Metal-Organic Cages: Formation of an Amorphous Cationic Porous Extended Framework for the Uptake of Oxo-Anions from Water.

Invited for this month's cover are the collaborating groups of Sheng-Run Zheng and Wei-Guang Zhang from South China Normal University, China. The cover picture shows an amorphous cationic porous metal-organic material that constructed from the covalent linking of large cationic metal-organic cage for the removal of toxic oxo-anions from water with high capacities and rapid kinetics. Read the full text of the article at 10.1002/cplu.202000570.

Covalent Cross-Linking of Metal-Organic Cages: Formation of an Amorphous Cationic Porous Extended Framework for the Uptake of Oxo-Anions from Water.

Cationic amorphous metal-organic cage (MOC)-based materials capable of removing anionic pollutants from water are receiving increasing attention but they are still relatively less reported. Herein, for the first time, a cationic porous MOC-based extended framework, namely, CL-aMOC-1, was constructed by covalent linking of a cationic Pd12 L24 (L=3,5-di-pyridin-4-yl-benzaldehyde) cage with a 1,4-bis(4-aminophenyl)benzene (BAPB) linker. Interestingly, the reaction could be completed within 15 min using an amorphous MOC-based solid (aMOC-1) and BAPB as reactant via a low-temperature solid-state reaction. The CL-aMOC-1 showed improved stability, lower solubility and higher oxo-anion uptake in water compared with the original aMOC-1. The adsorption capacities for CrO4 2- , Cr2 O7 2- and ReO4 - on CL-aMOC-1 were 245.1, 311.5 and 452.5 mg/g, respectively, in which the uptake of Cr(VI)-containing oxo-anions was among the highest compared with those of other metal-organic materials. The CL-aMOC-1 can selectively capture oxo-anions in the presence of competitive anions. It exhibits good reusability as over 85 % of the uptake capacity is retained after 5 cycles. Finally, it shows the ability to remove Cr(VI) ions from electroplating wastewater.

A Mn(II)-MOF with inherent missing metal-ion defects based on an imidazole-tetrazole tripodal ligand and its application in supercapacitors.

A metal-organic framework (MOF), namely SCNU-Z3, based on an imidazole-tetrazole tripodal ligand and Mn(ii), has been constructed. It exhibits a porous 3D framework composed of truncated octahedron cage subunits. Unexpected ligand-induced missing metal-ion defects were observed in the framework. In addition, the application of SCNU-Z3 in a supercapacitor was performed.

The interaction of an amorphous metal-organic cage-based solid (aMOC) with miRNA/DNA and its application on a quartz crystal microbalance (QCM) sensor.

The interaction between an aMOC and miRNA/DNA is studied and the use of a signal probe DNA (spDNA)@aMOC complex as an effective amplifier in a QCM sensor to detect miRNA is developed. The signal can be significantly enhanced, which leads to improved performance when detecting and distinguishing miRNAs.

Cu-MOF derived Cu-C nanocomposites towards high performance electrochemical supercapacitors.

For the development of asymmetric supercapacitors with higher energy density, the study of new electrode materials with high capacitance is a priority. Herein, the electrochemical behavior of nano copper in alkaline electrolyte is first discovered. It is found that there are two obvious reversible redox symmetric peaks in the range of -0.8-0.2 V in the alkaline electrolyte, corresponding to the conversion of copper into cuprous ions, and then converting cuprous ions into copper ions, indicating that the nanocomposite electrode has the characteristics of a pseudocapacitive reaction. It has a specific capacitance of up to 318 F g-1 at a current density of 1 A g-1, which remains at nearly 100% after 10 000 cycles at the same current density. When assembled with a Ni(OH)2-based electrode into an asymmetric supercapacitor, the device shows excellent capacitive behavior and good reaction reversibility. At 0.4 A g-1, the supercapacitor delivers a reversible capacity of 8.33 F g-1 with an energy density of 13.5 mW h g-1. This study first discovers the electrochemical behavior of nano copper, which can provide a new research idea for further expanding the negative electrodes of supercapacitors with higher energy density.

A new QCM signal enhancement strategy based on streptavidin@metal-organic framework complex for miRNA detection.

Sensitive and selective detection of miRNA is of great significance for the early diagnosis of human diseases, especially for cancers. Quartz crystal microbalance (QCM) is an effective tool for detecting biological molecules; however, the application of QCM for miRNA detection is still very limited. One of the great needs for QCM detection is to further improve the QCM signal. Herein, for the first time, we promote a new signal enhancement strategy for the detection of miRNA by QCM. First, a hairpin biotin-modified DNA was used as a probe DNA, which exposes the biotin site when interacting with target miRNA. Then, a streptavidin@metal-organic framework (SA@MOF) complex formed by electrostatic attractions between SA and a MOF was introduced into the QCM detection system. The SA@MOF complexes serve as both a signal amplifier and a specific recognition element via specific biotin-SA interactions. The strategy was applied to the detection of a colorectal cancer marker, miR-221, by using a stable Zr(IV)-MOF, UiO-66-NH2. The detection linear range was 10 fM-1 nM, the detection limit was 6.9 fM, and the relative standard deviation (RSD) (n = 5) was lower than 10% in both simulated conditions and the real serum environment. Furthermore, the detection limit reached 0.79 aM when coupled with the isothermal exponential amplification reaction (EXPAR).

Homochiral Cu(I) Coordination Polymers Based on a Double-Stranded Helical Building Block from Achiral Ligands: Symmetry-Breaking Crystallization, Photophysical and Photocatalytic Properties.

A pair of homochiral coordination polymers, [Cu(DPT)]n (1M and 1P, HDPT = 3,5-di-4-pyridinyl-2H-tetrazole), were assembled from achiral precursors. Crystal structure analysis showed that they are chiral three-dimensional (3D) coordination polymers based on a new double-stranded helical building block that is composed of two different 1D helices. Interestingly, rare symmetry-breaking crystallization was observed, in which the possibility of obtaining enantio-enriched bulk product with excessive M enantiomers (1-A) was obviously higher than that for P enantiomers (1-B) as demonstrated in multiple, repeated experiments with single-crystal diffraction and vibrational circular dichroism (VCD) spectra. Moreover, compound [Cu(DPT)]n shows good chemical stability in water, with pH values ranging from 3 to 13, as well as in many common organic solvents. Photophysical properties, including thermochromic properties and two-photon excited luminescence, were studied, and the potential for applications in temperature sensing was exhibited. In addition, the photocatalytic degradation of methylene blue in water indicated that compound [Cu(DPT)]n can be used as a photocatalyst.