Baicalein Delays H2O2-Induced Astrocytic Senescence through Inhibition of Senescence-Associated Secretory Phenotype (SASP), Suppression of JAK2/STAT1/NF-κB Pathway, and Regulation of Leucine Metabolism.

Baicalein is an active ingredient extracted from the dried roots of the Scutellaria baicalensis Georgi. It has been demonstrated to improve memory impairment in multiple animal models; however, the underlying mechanisms remain ambiguous. The accumulation of senescent astrocytes and senescence-associated secretory phenotype (SASP) secreted by senescent astrocytes has been deemed as potential contributors to neurodegenerative diseases. Therefore, this study explored the protective effects of baicalein against astrocyte senescence and investigated the molecular mechanisms and metabolic mechanisms of baicalein against astrocyte senescence. Our results demonstrated that treatment with baicalein protects T98G cells from H2O2-induced damage, delays cell senescence, inhibits the secretion of SASP (IL-6, IL-8, TNF-α, CXCL1, and MMP-1), and inhibits SASP-related pathways NF-κB and JAK2/STAT1. 1H NMR metabolomics analysis and correlation analysis revealed that leucine was significantly correlated with SASP factors. Further study demonstrated that supplement with leucine could restrain SASP secretion, and baicalein could significantly increase leucine level through down-regulation of BCAT1 and up-regulation of SLC7A5 expression. The above results revealed that baicalein exerted protective and antisenescence effects in H2O2-induced T98G cells possibly through inhibition of SASP, suppression of JAK2/STAT1/NF-κB pathway, and regulation of leucine metabolism. Consistent results were obtained in primary astrocytes of newborn SD rats, which suggests that baicalein significantly increases viabilities, delays senescence, inhibits IL-6 secretion, and increases leucine level in H2O2-induced primary astrocytes.

[Responses of canopy stomatal conductance of Platycladus orientalis to soil water under water control.] / æŽ§æ°´æ¡ä»¶ä¸‹ä¾§æŸå† å±‚æ°”å­”å¯¼åº¦å¯¹åœŸå£¤æ°´çš„å“åº”.

A water-controlled experiment with four treatments (no rain, half raining, natural raining and double raining) was carried out in a Platycladus orientalis forest. The factors including soil water content (SWC), precipitation, sap flow density (Js), leaf area index (LAI), vapor pressure deficit (VPD) were monitored during August 2016 to August 2017. We further analyzed the response of canopy stomatal conductance (gs) to changes of SWC. The results showed that the SWC of plots (half, natural and double raining) showed a positive correlation with precipitation, and the range of SWC was 4.9%-16.0%, 7.2%-22.9%, 7.4%-29.6%, respectively. The SWC in the plot with no rain decreased by 50% from August to October. The daily gs reached a peak of 166.64 mmol·m-2·s-1 at 14:00 in July, which was significantly higher than other months. A bimodal phenomenon occurred. The daily gs reached a peak of 54.1 mmol·m-2·s-1 at 12:00 in January. Under the three rain plots, diurnal variation of gs and SWC showed a negative quadratic correlation. The SWC corresponding to the peak of gs was 8.5%, 12.5% and 18.5%, respectively, close to the annual average SWC. Sensitivity (δ) of gs to VPD /reference canopy stomatal conductance (gsref) was more than or equal to 0.6 in different water-controlled plots, indicating that soil water condition was more suitable for water demand of P. orientalis. When SWC was between 3.7% and 7.5%, the δ and gsref increased rapidly, indicating that stomata had better regulation ability, and that plant stomata was more sensitive to VPD. When SWC increased to 11%, SWC alteration did not affect the response sensitivity of gsrefand gs to VPD. There might be a SWC threshold value for the adaptation of P. orientalis. By closing or reducing stomatal aperture, leaf water potential decreased, P. orientalis could adapt to excessive VPD and avoid excessive transpiration, which was more effective in regulating transpiration.

Enhanced Electrochemical Performance of Fe0.74Sn5@Reduced Graphene Oxide Nanocomposite Anodes for Both Li-Ion and Na-Ion Batteries.

The recently found intermetallic FeSn5 phase with defect structure Fe0.74Sn5 has shown promise as a high capacity anode for lithium-ion batteries (LIBs). The theoretical capacity is as high as 929 mAh g(-1) thanks to the high Sn/Fe ratio. However, despite being an alloy, the cycle life remains a great challenge. Here, by combining Fe0.74Sn5 nanospheres with reduced graphene oxide (RGO) nanosheets, the Fe0.74Sn5@RGO nanocomposite can achieve capacity retention 3 times that of the nanospheres alone, after 100 charge/discharge cycles. Moreover, the nanocomposite also displays its versatility as a high-capacity anode in sodium-ion batteries (SIBs). The enhanced cell performance in both battery systems indicates that the Fe0.74Sn5@RGO nanocomposite can be a potential anode candidate for the application of Li-ion and Na-ion battery.

Facile preparation of lightweight microcellular polyetherimide/graphene composite foams for electromagnetic interference shielding.

We report a facile approach to produce lightweight microcellular polyetherimide (PEI)/graphene nanocomposite foams with a density of about 0.3 g/cm3 by a phase separation process. It was observed that the strong extensional flow generated during cell growth induced the enrichment and orientation of graphene on cell walls. This action decreased the electrical conductivity percolation from 0.21 vol % for PEI/graphene nanocomposite to 0.18 vol % for PEI/graphene foam. Furthermore, the foaming process significantly increased the specific electromagnetic interference (EMI) shielding effectiveness from 17 to 44 dB/(g/cm3). In addition, PEI/graphene nanocomposite foams possessed low thermal conductivity of 0.065-0.037 W/m·K even at 200 °C and high Young's modulus of 180-290 MPa.

Tough graphene-polymer microcellular foams for electromagnetic interference shielding.

Functional polymethylmethacrylate (PMMA)/graphene nanocomposite microcellular foams were prepared by blending of PMMA with graphene sheets followed by foaming with subcritical CO(2) as an environmentally benign foaming agent. The addition of graphene sheets endows the insulating PMMA foams with high electrical conductivity and improved electromagnetic interference (EMI) shielding efficiency with microwave absorption as the dominant EMI shielding mechanism. Interestingly, because of the presence of the numerous microcellular cells, the graphene-PMMA foam exhibits greatly improved ductility and tensile toughness compared to its bulk counterpart. This work provides a promising methodology to fabricate tough and lightweight graphene-PMMA nanocomposite microcellular foams with superior electrical and EMI shielding properties by simultaneously combining the functionality and reinforcement of the graphene sheets and the toughening effect of the microcellular cells.

A facile approach to the synthesis of graphene nanosheets under ultra-low exfoliation temperature.

High specific surface area graphene nanosheets have been obtained from graphite oxide by using an effective modified exfoliation method under vacuum, the exfoliation temperature (135 degrees C) is much lower than that conventionally applied (1050 degrees C) to obtain monolayer graphene sheets via rapid thermal shock. These products have fluffy and highly porous structure and with a lateral size typically of a few micrometers. Transmission electron microscopy (TEM) observation shows that it looks like a wrinkled transparent ultrathin film consisting of single or few-layer graphene sheets, and their Brunauer-Emmett-Teller surface area is as large as 750 m2/g. Simultaneously, X-ray photoelectron spectroscopy analysis revealed that considerable amount of oxygen-containing groups (C/O ratio, 5:1) retained on the graphene sheets after exfoliation process, which would provide convenience for further modification of the surface properties and chemistry of graphene sheets. This work offers a facile and scalable approach to fabricate graphene oxide and opens up a new vista of various potential applications electronics and composite materials.