Integrating Prelithiation and Interface Protection to Achieve High-Energy All-Solid-State Batteries.

All-solid-state batteries (ASSBs), particularly those with Li-free anodes or even anode-free configurations, have attracted extensive attention due to high safety and energy density. However, chemical-mechanical degradation typically deteriorates the cycle life and energy of Li-free anode ASSBs with the absence of Li inventory. Here, the prelithiation agent Li5FeO4 (LFO) coated Ni-rich layered oxide is developed as the cathode for Li-free anode ASSBs. The coated LFO acts as an interfacial protective layer to prevent the highly oxidizing Ni-rich cathode from reacting with sulfide solid-state electrolytes (SSEs), mitigating the structural degradation of Ni-rich cathodes and the decomposition of SSE, resulting in excellent cycle life. Beneficial from the coated LFO in the cathode of the Li-free anode ASSBs, the reversible capacity improves from 174.7 mAh g-1 to 199.7 mAh g-1, and the capacity retention is enhanced from 33.8 % to 84.8 % after 100 cycles. Additionally, an ultrahigh energy density of 440 Wh kg-1, based on the mass of the composite cathode, Li-free anode, and SSE, is obtained in a Li-free anode all-solid-state pouch cell equipped with the LFO-coated cathode.

Lithium Metal Recovery from Sea Water by a Flexible and Scalable Membrane with Lithium-Ion Exclusive Channels.

Sea water is abundant in lithium reserves, and extracting lithium metal from it holds the potential to not only mitigate the shortage of lithium in light of the fast-growing electric vehicle industry, but also serve as an anode electrode to provide electricity. The task, however, is challenging due to the harsh reactions and low lithium concentration in sea water. Here, we present a single-channel strategy based on a flexible and scalable lithium ion-sieve membrane for efficient lithium extraction. Our composite membrane exhibits high separation factor ßLi/Na of more than 2.87×107 with an ionic conductivity of 6.2×10-5 S cm-1. Lithium metal was electrolytically extracted from sea water through a hybrid-electrolyte system, which yielded a high Coulombic efficiency of 98.04 % and a low energy consumption of 17.4 kWh kgLi -1 at an optimized extracting current of 200 µA cm-2. The extracted lithium metal can be directly integrated into a lithium-sulfur battery, delivering an energy output of 395 Wh kg-1. To demonstrate its industrial viability, we also fabricate a pouch cell with Li metal anode extracted by an amplified extraction prototype. This study has the potential to dispel concerns of lithium depletion and facilitate the sustainable development of lithium-based energy storage systems.

A Customized Strategy Realizes Stable Cycle of Large-Capacity and High-Voltage Layered Cathode for Sodium-Ion Batteries.

High-voltage P2-Na0.67Ni0.33Mn0.67O2 layered oxide cathode exhibits significant potential for sodium-ion batteries, owing to the elevated operating voltage and theoretical energy density beyond lithium iron phosphate, but the large-volume phase transition is the devil. Currently, this type cathode still suffers from stability-capacity trade-off dilemma. Herein, a concept of customized strategy via multiple rock-forming elements trace doping is presented to address the mentioned issue. The customized Mg-Al-Ti trace doped cathode maintains a notable capacity of 140.3 mAh g-1 with an energy density approaching 500 Wh kg-1, and shows good cycle stability, retaining 89.0 % of its capacity after 50 cycles at 0.1 C. Additionally, the full cell, paired with a hard carbon anode, achieves an advanced energy density of 303.3 Wh kg-1. The multiple characterizations reveal the failure mechanism of contrast sample involving severe intragranular cracks coupled with layer to rock salt transformation, which reduces active substance and increases charge transfer resistance. The doped sample with increased sliding energy barrier well suppresses this phenomenon. Impressively, the customized strategy can be extended to Mg-Fe-Ti system. This research provides a novel concept for the design of high energy sodium-ion cathode.

Strong Covalent Metal-Ligand Interaction Enables a Fast Kinetic and Structurally Stable Na-Ion Layered Cathode.

Anionic redox chemistry has attracted increasing attention for the improvement in the reversible capacity and energy density of cathode materials in Li/Na-ion batteries. However, adverse electrochemical behaviors, such as voltage hysteresis and sluggish kinetics resulting from weak metal-ligand interactions, commonly occur with anionic redox reactions. Currently, the mechanistic investigation driving these issues still remains foggy. Here, we chemically designed Na0.8Fe0.4Ti0.6S2 and Na0.8Fe0.4Ti0.6O2 as model cathodes to explore the covalency effects on metal-ligand interactions during anionic redox process. Na0.8Fe0.4Ti0.6S2 with strengthened covalent interaction of metal-ligand bonds exhibits smaller voltage hysteresis and faster kinetics than Na0.8Fe0.4Ti0.6O2 during (de)sodiation process. Theoretical calculations suggest that Fe is the dominant redox-active center in Na0.8Fe0.4Ti0.6S2, whereas the redox-active center moves from Fe to O with the removal of Na+ in Na0.8Fe0.4Ti0.6O2. We attribute the above different redox behaviors between Na0.8Fe0.4Ti0.6S2 and Na0.8Fe0.4Ti0.6O2 to the charge transfer kinetics from ligand to metal. Moreover, the structural stability of Na0.8Fe0.4Ti0.6S2 is enhanced by increasing the cation migration barriers through strong metal-ligand bonds during desodiation. These insights into the originality of metal-ligand interactions provide guidance for the design of high-capacity and structurally stable cathode materials for Li/Na-ion batteries.

Tailoring the Electrode-Electrolyte Interface for Reliable Operation of All-Climate 4.8†V Li||NCM811 Batteries.

Combining high-voltage nickel-rich cathodes with lithium metal anodes is among the most promising approaches for achieving high-energy-density lithium batteries. However, most current electrolytes fail to simultaneously satisfy the compatibility requirements for the lithium metal anode and the tolerance for the ultra-high voltage NCM811 cathode. Here, we have designed an ultra-oxidation-resistant electrolyte by meticulously adjusting the composition of fluorinated carbonates. Our study reveals that a solid-electrolyte interphase (SEI) rich in LiF and Li2O is constructed on the lithium anode through the synergistic decomposition of the fluorinated solvents and PF6 - anion, facilitating smooth lithium metal deposition. The superior oxidation resistance of our electrolyte enables the Li||NCM811 cell to deliver a capacity retention of 80 % after 300 cycles at an ultrahigh cut-off voltage of 4.8 V. Additionally, a pioneering 4.8 V-class lithium metal pouch cell with an energy density of 462.2 Wh kg-1 stably cycles for 110 cycles under harsh conditions of high cathode loading (30 mg cm-2), low N/P ratio (1.18), and lean electrolytes (2.3 g Ah-1).

Revealing the Dynamic Evolution of Electrolyte Configuration on the Cathode-Electrolyte Interface by Visualizing (De)Solvation Processes.

Electrolyte engineering is crucial for improving cathode electrolyte interphase (CEI) to enhance the performance of lithium-ion batteries, especially at high charging cut-off voltages. However, typical electrolyte modification strategies always focus on the solvation structure in the bulk region, but consistently neglect the dynamic evolution of electrolyte solvation configuration at the cathode-electrolyte interface, which directly influences the CEI construction. Herein, we reveal an anti-synergy effect between Li+-solvation and interfacial electric field by visualizing the dynamic evolution of electrolyte solvation configuration at the cathode-electrolyte interface, which determines the concentration of interfacial solvated-Li+. The Li+ solvation in the charging process facilitates the construction of a concentrated (Li+-solvent/anion-rich) interface and anion-derived CEI, while the repulsive force derived from interfacial electric field induces the formation of a diluted (solvent-rich) interface and solvent-derived CEI. Modifying the electrochemical protocols and electrolyte formulation, we regulate the "inflection voltage" arising from the anti-synergy effect and prolong the lifetime of the concentrated interface, which further improves the functionality of CEI architecture.

Intercepting Dendrite Growth With a Heterogeneous Solid Electrolyte for Long-Life All-Solid-State Lithium Metal Batteries.

The application of lithium metal anode in all-solid-state batteries has the potential to achieve both high energy density and safety performance. However, the presence of serious dendrite issues hinders this potential. Here, the ion transport pathways and orientation of dendrite growth are regulated by utilizing the differences of ionic conductivity in heterogeneous electrolytes. The in situ formed Li-Ge alloy phases from the spontaneous reaction between Li10GeP2S12 and the attracted dendrites greatly enhance the ability to resist dendrite growth. As an outcome, the heterogeneous electrolyte achieves a high critical current density of 2.1 mA cm-2 and long-term stable symmetrical battery operation (0.3 mA cm-2 for 17 000 h and 1.0 mA cm-2 for 2000 h). Besides, due to the superior interfacial stability and low interface impedance between the heterogeneous electrolyte and lithium anode, the Li||LiNi0.8Co0.1Mn0.1O2 full battery exhibits great cycling stability (80.5% after 500 cycles at 1.0 mA cm-2) and rate performance (125.4 mAh g at 2.0 mA cm-2). This work provides a unique strategy of interface regulation via heterogeneous electrolytes design, offering insights into the development of state-of the-art all-solid-state batteries.

A Rechargeable "Rocking Chair" Type Zn-CO2 Battery.

Rising global temperatures and critical energy shortages have spurred researches into CO2 fixation and conversion within the realm of energy storage such as Zn-CO2 batteries. However, traditional Zn-CO2 batteries employ double-compartment electrolytic cells with separate carriers for catholytes and anolytes, diverging from the "rocking chair" battery mechanism. The specific energy of these conventional batteries is constrained by the solubility of discharge reactants/products in the electrolyte. Additionally, H2O molecules tend to trigger parasitic reactions at the electrolyte/electrode interfaces, undermining the long-term stability of Zn anodes. In this report, we introduce an innovative "rocking chair" type Zn-CO2 battery that utilizes a weak-acidic zinc trifluoromethanesulfonate aqueous electrolyte compatible with both cathode and anode. This design minimizes side reactions on the Zn surface and leverages the high catalytic activity of the cathode material, allowing the battery to achieve a substantial discharge capacity of 6734 mAh g-1 and maintain performance over 65 cycles. Moreover, the successful production of pouch cells demonstrates the practical applicability of Zn-CO2 batteries. Electrode characterizations confirm superior electrochemical reversibility, facilitated by solid discharge products of ZnCO3 and C. This work advances a "rocking chair" Zn-CO2 battery with an enhanced specific energy and a reversible pathway, providing a foundation for developing high-performance metal-CO2 batteries.

An inorganic molten salt electrolyte-based Li-CO2 battery with moderate working temperature and enhanced performance.

Herein, a binary inorganic molten salt electrolyte based on lithium bis(fluorosulfonyl)imide (LiFSI) and potassium bis(fluorosulfonyl)imide (KFSI) is applied to Li-CO2 batteries that can operate under 80 °C. Benefiting from the intrinsic nonvolatility, electrochemical stability, raised ionic conductivity, sufficient solubility and safety, the molten electrolyte endows the Li-CO2 battery with a large discharge capacity of 4612 mA h g-1 and superior rate capability. The introduction of the Ru@Super P carbon cathode further optimizes the discharge capacity (9503 mA h g-1), overpotential (1.15 V), and rate capability.

Sustainable Electrosynthesis of N,N-Dimethylformamide via Relay Catalysis on Synergistic Active Sites.

Electrified synthesis of high-value organonitrogen chemicals from low-cost carbon- and nitrogen-based feedstocks offers an economically and environmentally appealing alternative to traditional thermocatalytic methods. However, the intricate electrochemical reactions at electrode surfaces pose significant challenges in controlling selectivity and activity, especially for producing complex substances such as N,N-dimethylformamide (DMF). Herein, we tackle this challenge by developing relay catalysis for efficient DMF production using a composite WO2-NiOOH/Ni catalyst with two distinctive active sites. Specifically, WO2 selectively promotes dimethylamine (DMA) electrooxidation to produce strongly surface-bound (CH3)2N*, while nearby NiOOH facilitates methanol electrooxidation to yield more weakly bound *CHO. The disparity in binding energetics of the key C- and N-intermediates expedites C-N coupling at the WO2-NiOOH interface. In situ infrared spectroscopy with isotope-labeling experiments, quasi-in situ electron paramagnetic resonance trapping experiments, and electrochemical operating experiments revealed the C-N coupling mechanism and enhanced DMF-synthesis selectivity and activity. In situ X-ray absorption spectroscopy (XAS) and postreaction transmission electron microscopy (TEM) studies verified the stability of WO2-NiOOH/Ni during extended electrochemical operation. A Faradaic efficiency of ∼50% and a production rate of 438 µmol cm-2 h-1 were achieved at an industrially relevant current density of 100 mA cm-2 over an 80 h DMF production period. This study introduces a new paradigm for developing electrothermo relay catalysis for the sustainable and efficient synthesis of valuable organic chemicals with industrial potential.

Over-lithiated NCM through Li5FeO4 for high energy silicon-based lithium-ion batteries.

Si/C composite material is a promising anode material for next-generation lithium-ion batteries due to its high capacity. However, it also exhibits significant initial capacity loss in a full cell due to the unstable SEI. To compensate for the loss of Li inventory, a pre-lithiation reagent, Li5FeO4 (LFO), is incorporated into the LiNi0.85Co0.12Mn0.03O2 (NCM85E) cathode for electrochemical evaluation. The results show that with the addition of LFO, the initial discharge capacity of SiC950/NCM85E full cells can increase from 151.0 mA h g-1 to 193.4 mA h g-1 by 28.1% with a high cathode loading up to about 20 mg cm-2. After 200 cycles, the specific capacity also increased by 25.1%.

Unlocking Dynamic Solvation Chemistry and Hydrogen Evolution Mechanism in Aqueous Zinc Batteries.

Understanding the interfacial hydrogen evolution reaction (HER) is crucial to regulate the electrochemical behavior in aqueous zinc batteries. However, the mechanism of HER related to solvation chemistry remains elusive, especially the time-dependent dynamic evolution of the hydrogen bond (H-bond) under an electric field. Herein, we combine in situ spectroscopy with molecular dynamics simulation to unravel the dynamic evolution of the interfacial solvation structure. We find two critical change processes involving Zn-electroplating/stripping, including the initial electric double layer establishment to form an H2O-rich interface (abrupt change) and the subsequent dynamic evolution of an H-bond (gradual change). Moreover, the number of H-bonds increases, and their strength weakens in comparison with the bulk electrolyte under bias potential during Zn2+ desolvation, forming a diluted interface, resulting in massive hydrogen production. On the contrary, a concentrated interface (H-bond number decreases and strength enhances) is formed and produces a small amount of hydrogen during Zn2+ solvation. The insights on the above results contribute to deciphering the H-bond evolution with competition/corrosion HER during Zn-electroplating/stripping and clarifying the essence of electrochemical window widened and HER suppression by high concentration. This work presents a new strategy for aqueous electrolyte regulation by benchmarking the abrupt change of the interfacial state under an electric field as a zinc performance-enhancement criterion.

Ultra-Fast-Charging, Long-Duration, and Wide-Temperature-Range Sodium Storage Enabled by Multiwalled Carbon Nanotube-Hybridized Biphasic Polyanion-Type Phosphate Cathode Materials.

Sodium-ion batteries (SIBs) represent a promising energy storage technology with great safety. Because of their high operating potential, superior structural stability, and prominent thermal stability, polyanion-type phosphates have garnered significant interest in superior prospective cathode materials for SIBs. Nevertheless, the disadvantages of poor intrinsic electronic conductivity, sluggish kinetics, and volume variation during sodiation/desodiation remain great challenges for satisfactory rate performance and cycle stability, which severely hinder their further practical applications. In this work, by adjusting the amounts of pretreated multiwalled carbon nanotubes (CNT) added intentionally at the beginning of the preparation, biphasic polyanion-type phosphate materials (marked as NFC) are synthesized through a one-pot solid state reaction methodology, which are composed of CNT-interwoven Na3V2(PO4)2F3 (NVPF) and a small amount of Na3V2(PO4)3 (NVP). Benefiting from the improved electronic conductivity and unique composition and structure, the optimized sample (labeled as NFC-2) illustrates exceptional cycle stability and remarkable rate performance. The discharge capacities of the NFC-2 electrode are 114.8 and 78.6 mAh g-1 tested at 20 and 5000 mA g-1, respectively. Notably, such an electrode still gives out 75.7% capacity retention upon 10 000 cycles at 5000 mA g-1. In situ X-ray diffraction analysis demonstrates that the NFC-2 cathode has outstanding structural reversibility during charge/discharge cycles. More importantly, such a biphasic material has achieved impressive electrochemical performance within a wide operating temperature range of -20-50 °C. When temperature is decreased to -20 °C, the NFC-2 electrode still delivers an initial discharge capacity of 102.4 mAh g-1 and exhibits a remarkable capacity retention of 97.8% even after 500 cycles at 50 mA g-1. In addition, the sodium-ion full cell assembled by integrating NFC-2 cathode and hard carbon anode shows a satisfying energy density of 431.3 Wh kg-1 at 20 mA g-1 with a better long-term cycle performance. The synergistic effect among high energy NVPF, conductive CNT, and stable NVP may lead to the great improvement in the electrochemical sodium storage performance of the NFC-2 sample. Such biphasic polyanion-type phosphate materials will inject new ideas into the material design for SIBs with excellent electrochemical performance and further promote practical applications of this advanced energy storage technology.

Recent advances in zinc-ion dehydration strategies for optimized Zn-metal batteries.

Aqueous Zn-metal batteries have attracted increasing interest for large-scale energy storage owing to their outstanding merits in terms of safety, cost and production. However, they constantly suffer from inadequate energy density and poor cycling stability due to the presence of zinc ions in the fully hydrated solvation state. Thus, designing the dehydrated solvation structure of zinc ions can effectively address the current drawbacks of aqueous Zn-metal batteries. In this case, considering the lack of studies focused on strategies for the dehydration of zinc ions, herein, we present a systematic and comprehensive review to deepen the understanding of zinc-ion solvation regulation. Two fundamental design principles of component regulation and pre-desolvation are summarized in terms of solvation environment formation and interfacial desolvation behavior. Subsequently, specific strategy based distinct principles are carefully discussed, including preparation methods, working mechanisms, analysis approaches and performance improvements. Finally, we present a general summary of the issues addressed using zinc-ion dehydration strategies, and four critical aspects to promote zinc-ion solvation regulation are presented as an outlook, involving updating (de)solvation theories, revealing interfacial evolution, enhancing analysis techniques and developing functional materials. We believe that this review will not only stimulate more creativity in optimizing aqueous electrolytes but also provide valuable insights into designing other battery systems.

A "Liquid-In-Solid" Electrolyte for High-Voltage Anode-Free Rechargeable Sodium Batteries.

Developing anode-free batteries is the ultimate goal in pursuit of high energy density and safety. It is more urgent for sodium (Na)-based batteries due to its inherently low energy density and safety hazards induced by highly reactive Na metal anodes. However, there is no electrolyte that can meet the demanding Na plating-stripping Coulomb efficiency (CE) while resisting oxidative decomposition at high voltages for building stable anode-free Na batteries. Here, a "liquid-in-solid" electrolyte design strategy is proposed to integrate target performances of liquid and solid-state electrolytes. Breaking through the Na+ transport channel of Na-containing zeolite molecular sieve by ion-exchange and confining aggregated liquid ether electrolytes in the nanopore and void of zeolites, it achieves excellent high-voltage stability enabled by solid-state zeolite electrolytes, while inheriting the ultra-high CE (99.84%) from liquid ether electrolytes. When applied in a 4.25 V-class anode-free Na battery, an ultra-high energy density of 412 W h kg-1 (based on the active material of both cathodes and anodes) can be reached, which is comparable to the state-of-the-art graphite||LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries. Furthermore, the assembled anode-free pouch cell exhibits excellent cycling stability, and a high capacity retention of 89.2% can be preserved after 370 cycles.

Perspective on High-Stability Single-Crystal Li-Rich Cathode Materials for Li-Ion Batteries.

Benefiting from anionic and cationic redox reactions, Li-rich materials have been regarded as next-generation cathodes to overcome the bottleneck of energy density. However, they always suffer from cracking of polycrystalline (PC) secondary particles and lattice oxygen release, resulting in severe structural deterioration and capacity decay upon cycling. Single-crystal (SC) design has been proven as an effective strategy to relieve these issues in traditional Li-rich cathodes with PC morphology. Herein, we first reviewed the main synthesis routes of SC Li-rich materials including solid-state reaction, molten salt-assisted, and hydrothermal/solvothermal methods, in which the differences in grain morphology, electrochemical behaviors, and other properties induced by various routes were analyzed and discussed. Furthermore, the distinct characteristics were compared between SC and PC cathodes from the aspects of irreversible capacity, structural stability, capacity/voltage degradation, and gas release. Besides, recent advances in layered SC Li-rich oxide cathodes were summarized in detail, where the unique structural designs and modification strategies could greatly promote their structural/electrochemical stability. At last, challenges and perspectives for the emerging SC Li-rich cathodes were proposed, which provided an exceptional opportunity to achieve high-energy-density and high-stability Li-ion/metal batteries.

Achieving a Deeply Desodiated Stabilized Cathode Material by the High Entropy Strategy for Sodium-ion Batteries.

Manganese-based layered oxides are currently of significant interest as cathode materials for sodium-ion batteries due to their low toxicity and high specific capacity. However, the practical applications are impeded by sluggish intrinsic Na+ migration and poor structure stability as a result of Jahn-Teller distortion and complicated phase transition. In this study, a high-entropy strategy is proposed to enhance the high-voltage capacity and cycling stability. The designed P2-Na0.67Mn0.6Cu0.08Ni0.09Fe0.18Ti0.05O2 achieves a deeply desodiation and delivers charging capacity of 158.1 mAh g-1 corresponding to 0.61 Na with a high initial Coulombic efficiency of 98.2 %. The charge compensation is attributed to the cationic and anionic redox reactions conjunctively. Moreover, the crystal structure is effectively stabilized, leading to a slight variation of lattice parameters. This research carries implications for the expedited development of low-cost, high-energy-density cathode materials for sodium-ion batteries.

Constructing An Oxyhalide Interface for 4.8†V-Tolerant High-Nickel Cathodes in All-Solid-State Lithium-Ion Batteries.

All-solid-state lithium batteries (ASSBs) have received increasing attentions as one promising candidate for the next-generation energy storage devices. Among various solid electrolytes, sulfide-based ASSBs combined with layered oxide cathodes have emerged due to the high energy density and safety performance, even at high-voltage conditions. However, the interface compatibility issues remain to be solved at the interface between the oxide cathode and sulfide electrolyte. To circumvent this issue, we propose a simple but effective approach to magic the adverse surface alkali into a uniform oxyhalide coating on LiNi0.8Co0.1Mn0.1O2 (NCM811) via a controllable gas-solid reaction. Due to the enhancement of the close contact at interface, the ASSBs exhibit improved kinetic performance across a broad temperature range, especially at the freezing point. Besides, owing to the high-voltage tolerance of the protective layer, ASSBs demonstrate excellent cyclic stability under high cutoff voltages (500 cycles~94.0 % at 4.5 V, 200 cycles~80.4 % at 4.8 V). This work provides insights into using a high voltage stable oxyhalide coating strategy to enhance the development of high energy density ASSBs.

Consummating ion desolvation in hard carbon anodes for reversible sodium storage.

Hard carbons are emerging as the most viable anodes to support the commercialization of sodium-ion (Na-ion) batteries due to their competitive performance. However, the hard carbon anode suffers from low initial Coulombic efficiency (ICE), and the ambiguous Na-ion (Na+) storage mechanism and interfacial chemistry fail to give a reasonable interpretation. Here, we have identified the time-dependent ion pre-desolvation on the nanopore of hard carbons, which significantly affects the Na+ storage efficiency by altering the solvation structure of electrolytes. Consummating the pre-desolvation by extending the aging time, generates a highly aggregated electrolyte configuration inside the nanopore, resulting in negligible reductive decomposition of electrolytes. When applying the above insights, the hard carbon anodes achieve a high average ICE of 98.21% in the absence of any Na supplementation techniques. Therefore, the negative-to-positive capacity ratio can be reduced to 1.02 for full cells, which enables an improved energy density. The insight into hard carbons and related interphases may be extended to other battery systems and support the continued development of battery technology.

Water Catchers within Sub-Nano Channels Promote Step-by-Step Zinc-Ion Dehydration Enable Highly Efficient Aqueous Zinc-Metal Batteries.

Zinc metal suffers from violent and long-lasting water-induced side reactions and uncontrollable dendritic Zn growth, which seriously reduce the coulombic efficiency (CE) and lifespan of aqueous zinc-metal batteries (AZMBs). To suppress the corresponding harmful effects of the highly active water, a stable zirconium-based metal-organic framework with water catchers decorated inside its sub-nano channels is used to protect Zn-metal. Water catchers within narrow channels can constantly trap water molecules from the solvated Zn-ions and facilitate step-by-step desolvation/dehydration, thereby promoting the formation of an aggregative electrolyte configuration, which consequently eliminates water-induced corrosion and side reactions. More importantly, the functionalized sub-nano channels also act as ion rectifiers and promote fast but even Zn-ions transport, thereby leading to a dendrite-free Zn metal. As a result, the protected Zn metal demonstrates an unprecedented cycling stability of more than 10 000 h and an ultra-high average CE of 99.92% during 4000 cycles. More inspiringly, a practical NH4V4O10//Zn pouch-cell is fabricated and delivers a capacity of 98 mAh (under high cathode mass loading of 25.7 mg cm-2) and preserves 86.2% capacity retention after 150 cycles. This new strategy in promoting highly reversible Zn metal anodes would spur the practical utilization of AZMBs.