Evaluation of pancreatic iodine uptake and related influential factors in multiphase dual-energy CT.

OBJECTIVES: To establish normative values and identify potential factors influencing pancreatic iodine uptake using dual-energy CT (DECT). MATERIALS AND METHODS: This retrospective study included participants without pancreatic diseases undergoing DECT at two institutions with different platforms. Their protocols both included arterial phase (AP), portal venous phase (PP), and equilibrium phase (EP), defined as 35 s-40 s, 60 s-70 s, and 150 s-180 s after injection of contrast agent, respectively. Both iodine concentration (IC) and normalised IC (NIC) were measured. Demographic features, local measurements of the pancreas and visceral fat area (VFA) were considered as potential factors influencing iodine uptake using multivariate linear regression analyses. RESULTS: A total of 562 participants (median age 58 years [interquartile range: 47-67], with 282 men) were evaluated. The mean IC differed significantly between two institutions (all p < 0.001) across three contrast-enhanced phases, while the mean NIC showed no significant differences (all p > 0.05). The mean values of NIC were 0.22 at AP, 0.43 at PP and 0.45 at EP. NICAP was independently affected by VFA (ß = 0.362, p < 0.001), smoking (ß = -0.240, p = 0.001), and type-II diabetes (ß = -0.449, p < 0.001); NICPP by VFA (ß = -0.301, p = 0.017) and smoking (ß = -0.291, p < 0.001); and NICEP by smoking (ß = -0.154, p = 0.10) and alcohol consumption (ß = -0.350, p < 0.001) with statistical power values over 0.81. CONCLUSION: NIC values were consistent across institutions. Abdominal obesity, smoking, alcohol consumption, and diabetes are independent factors influencing pancreatic iodine uptake. CLINICAL RELEVANCE STATEMENT: This study has provided reference normative values, influential factors and effective normalisation methods of pancreatic iodine uptake in multiphase dual-energy CT for future studies in this area as a new biological marker. KEY POINTS: Evaluation of pancreatic iodine uptake measured by dual-energy CT is a promising method for future studies. Abdominal obesity, smoking, alcohol consumption, diabetes, and sex are independent factors influencing pancreatic iodine uptake. Utility of normalised iodine concentration is necessary to ensure the consistency across different institutions.

Classification and hemodynamic characteristics of delayed intracerebral hemorrhage following stent-assisted coil embolism in unruptured intracranial aneurysms.

Background and objective: Stent-assisted coil (SAC) embolization is a commonly used endovascular treatment for unruptured intracranial aneurysms (UIAs) but can be associated with symptomatic delayed intracerebral hemorrhage (DICH). Our study aimed to investigate the hemodynamic risk factors contributing to DICH following SAC embolization and to establish a classification for DICH predicated on hemodynamic profiles. Methods: This retrospective study included patients with UIAs located in the internal carotid artery (ICA) treated with SAC embolization at our institution from January 2021 to January 2022. We focused on eight patients who developed postoperative DICH and matched them with sixteen control patients without DICH. Using computational fluid dynamics, we evaluated the hemodynamic changes in distal arteries [terminal ICA, the anterior cerebral artery (ACA), and middle cerebral artery (MCA)] pre-and post-embolization. We distinguished DICH-related arteries from unrelated ones (ACA or MCA) and compared their hemodynamic alterations. An imbalance index, quantifying the differential in flow velocity changes between ACA and MCA post-embolization, was employed to gauge the flow distribution in distal arteries was used to assess distal arterial flow distribution. Results: We identified two types of DICH based on postoperative flow alterations. In type 1, there was a significant lower in the mean velocity increase rate of the DICH-related artery compared to the unrelated artery (-47.25 ± 3.88% vs. 42.85 ± 3.03%; p < 0.001), whereas, in type 2, there was a notable higher (110.58 ± 9.42% vs. 17.60 ± 4.69%; p < 0.001). Both DICH types demonstrated a higher imbalance index than the control group, suggesting an association between altered distal arterial blood flow distribution and DICH occurrence. Conclusion: DICH in SAC-treated UIAs can manifest as either a lower (type 1) or higher (type 2) in the rate of velocity in DICH-related arteries. An imbalance in distal arterial blood flow distribution appears to be a significant factor in DICH development.

Boosting CO2 chemical fixation over MOF-808 by the introduction of functional groups and defective Zr sites.

CO2 cycloaddition has emerged as a promising approach for producing value-added cyclocarbonates and mitigating greenhouse gas emissions. Although MOF-808 serves as a stable catalyst for cycloaddition, its limited activity constrains broader applications. Through the modification with a fluoride group via a ligand exchange method, F-MOF-808-1.5 exhibits exceptional performance, achieving a 98.8% conversion with 97.8% selectivity to epichlorohydrin carbonate-marking a substantial 100% improvement compared to pristine MOF-808. The defective Zr sites and the electron-withdrawing groups synergistically promote the ring opening of epoxides. Furthermore, the catalyst demonstrates high stability over multiple reaction cycles. Notably, without adding solvents and co-catalysts, F-MOF-808-1.5 outperforms most reported MOF-based catalysts.

Studies on adsorption properties of magnetic composite prepared by one-pot method for Cd(II), Pb(II), Hg(II), and As(III): Mechanism and practical application in food.

A one-pot synthesis afforded a magnetic, crosslinked polymer adsorbent (m-P6) with a variety of functional groups to realize simultaneous adsorption of Cd2+, Pb2+, Hg2+, and As3+. The material was characterized by TEM-EDS, XRD, FT-IR, VSM, and XPS. Kinetic and isothermal analyses suggested mainly chemisorption processes of heavy metal ions that form multiple layers on heterogeneous surfaces. Theoretical adsorption capacities calculated by a pseudo-2nd-order kinetic model and the Sips isothermal model were 282.88 mg/g for Cd2+, 326.18 mg/g for Pb2+, 117.85 mg/g for Hg2+, and 320.29 mg/g for As3+. m-P6 not only can efficiently adsorb divalent heavy metals (Cd2+, Pb2+, Hg2+), but also demonstrate a process of adsorption-driven catalytic oxidation by single-electron transfer (SET) from As3+ to As5+. In application, in addition to adsorption in water, m-P6 is capable of minimizing matrix interference, and extracting trace heavy metals in a complex environment (cereal) through easy operations for improving the detection accuracy, as well as it is potential for application in detection of trace heavy metals in foodstuffs. m-P6 can be readily regenerated and efficiently recycled for 5 cycles using eluent E12 and dilute acid.

PABPN1 functions as a predictive biomarker in colorectal carcinoma.

PURPOSE: PABPN1 acts as a modulator of poly(A) tail length and alternative polyadenylation. This research was aimed to explore the role of PABPN1 in colorectal cancer (CRC). METHODS: Public databases were performed to analyze expression, location, roles of prognosis and tumor immunity and interaction with RNAs and proteins of PABPN1. To investigate PABPN1 expression in tissues, 78 CRC specimens were collected to conduct IHC, and 30 pairs of frozen CRC and corresponding adjacent normal tissues were used to conduct qRT-PCR and WB. In addition, in vitro experiments were then carried out to identify the role of PABPN1 in CRC. RESULTS: Compared with normal tissues, PABPN1 expression was significant higher in CRC. Its high level predicted poor outcome of CRC. Th1 and Treg had significant negative relationships not only with PABPN1 expression, but also with six molecules interacting with PABPN1, including IFT172, KIAA0895L, RECQL4, WDR6, PABPC1 and NCBP1. In addition, PABPN1 had negative relationships with quite a few immune markers, such as CSF1R, IL-10, CCL2 and so on. In cellular experiments, silencing PABPN1 inhibited proliferation and promoted apoptosis in HCT-116 CRC cells. CONCLUSION: In summary, PABPN1 might become a novel biomarker and correlate with tumor immunity in CRC.

Overlapping Stent Treatment for Ruptured Dissecting Aneurysms in Posterior Circulation.

Ruptured dissecting aneurysms in posterior intracranial circulation present significant clinical challenges and often cause poor prognoses. Our cohort used overlapping stents as the primary treatment. We analyzed the medical records of 27 patients (18 men/nine women) with ruptured posterior circulation dissecting aneurysms (PCDAs). Their average age was 52 years. We selected 11 patients who used Enterprise (EP) and LVIS stents overlappingly and matched them 1:1 with counterparts who received either EP or LVIS stents individually. Overlapping stents was a feasible treatment in all 27 cases. We successfully followed up 26 patients for ≥6 months. Regrettably, one patient died from intracranial hypertension on Day 7 post-procedure. Immediate post-procedure angiographies indicated Raymond grade I, II, and III occlusions of PCDAs in 16 (59.3%), 7 (25.9%), and 4 (14.8%) cases, respectively. At an average follow-up duration of 16.2 months, 25 patients (96.2%) had modified Rankin Scale scores of 0-2, signifying positive outcomes. One patient (3.8%) had a score of 3-4. Recurrence rates for the EP and LVIS stent groups were higher than those of the overlapping stent group (45.45% vs. 9.09%, p = 0.15 and 27.27% vs. 9.09%, p = 0.59, respectively). No significant difference in recurrence rates existed between the overlapping and single-stent groups. Similarly, follow-up outcomes were consistent between the two groups. Overlapping stents could be an efficient method for treating ruptured PCDAs.

Risk stratification of gastric cancer screening in community population based on oral contrast-enhanced ultrasonography examination: A 3-year follow-up analysis report.

Objective: This study aimed to retrospectively investigate the use of oral contrast-enhanced ultrasonography (O-CEUS) in assessing the thickness of the gastric wall for gastric cancer (GC) screening and to establish screening strategies for GC with different risk stratifications based on the gastric wall thickness. Methods: From January 2015 to March 2020, people who underwent O-CEUS at the Physical Examination Center of our hospital with at least three years of follow-up were included in this study. The thickness of the gastric wall measured by O-CEUS was divided into three groups using 6 mm and 9 mm as cutoff values. The occurrence of GC in each group was observed. The imaging and clinical information of these populations were recorded and analyzed. Kaplan-Meier survival analysis and Cox's proportional hazards regression were performed to calculate the risk of GC occurrence. Results: A total of 4,047 people were finally included in this study. During the follow-up period, GC occurred in 7 individuals (incidence rate 0.17%). Among them, according to the thickness of the gastric wall, one case occurred in Group A (< 6 mm), two cases occurred in Group B (6-9 mm), and four cases occurred in Group C (>9mm). Based on Kaplan-Meier survival analysis, the curves of the three groups were significantly different (P < 0.01). The risk of GC occurrence in Group C and Group B were higher than that in Group A (4.76E+2-fold and 1.50E+2-fold). Conclusion: O-CEUS is a convenient, economical, safe, and noninvasive screening method for GC. Measuring the thickness of the gastric wall is helpful to predict the risk of GC occurrence according to our stratification screening system.

Applicative Assessment of a Selective Laser Melting 3D-Printed Ti-6Al-4 V Plate with a Honeycomb Structure in the Reconstruction of a Mandibular Defect of a Beagle Dog.

The most challenging problem in oral and maxillofacial surgery is the reconstruction of defects for the oral and maxillofacial complex. Transfer of different autografts is known as the "gold standard" for the reconstruction of bone defects in the oral and maxillofacial region. Graft harvesting, however, can lead to many complications, such as donor-site morbidity, surgical time-consuming, etc. Three-dimensional (3D) printing technology is an innovative technique that allows the fabrication of personalized plates and scaffolds to fit the precise anatomy of an individual's defect. In this study, a selective laser melting 3D-printed Ti-6Al-4 V plate with a honeycomb was designed, and its physical and biological features were characterized. The personalized 3D-printed scaffold and commercialized titanium reconstruction plate were applied to reconstruct a 4 cm mandibular defect in a beagle dog. Effects of the treatment were analyzed radiologically and histologically. Our results showed that the application of a 3D-printed plate with a honeycomb achieved good biocompatibility and osseointegration and has potential clinical application.

Transcriptome Analysis of Glycerin Regulating Reuterin Production of Lactobacillus reuteri.

Reuterin can be produced from glycerol dehydration catalyzed by glycerol dehydratase (GDHt) in Lactobacillus reuteri and has broad application prospects in industry, agriculture, food, and other fields as it is active against prokaryotic and eukaryotic organisms and is resistant to proteases and lipases. However, high concentrations of glycerin inhibit reuterin production, and the mechanism behind this phenomenon is not clear. To elucidate the inhibitory mechanism of glycerol on reuterin synthesis in L. reuteri and provide reference data for constructing an L. reuteri culture system for highly effective 3-hydroxypropionaldehyde synthesis, we used transcriptome-sequencing technology to compare the morphologies and transcriptomes of L. reuteri cultured in a medium with or without 600 mM of glycerol. Our results showed that after the addition of 600 mM of glycerol to the culture medium and incubation for 10 h at 37 °C, the culture medium of L. reuteri LR301 exhibited the best bacteriostatic effect, and the morphology of L. reuteri cells had significantly changed. The addition of 600 mM of glycerol to the culture medium significantly altered the transcriptome and significantly downregulated the transcription of genes involved in glycol metabolism, such as gldA, dhaT, glpK, plsX, and plsY, but significantly upregulated the transcription of genes related to D-glucose synthesis.

Kinetin inhibits hepatic stellate cell activation and induces apoptosis via interactions with the TGF-ß1/Smad signaling pathway.

Hepatic fibrosis is the pathological repair response of the liver to chronic injury; hepatic stellate cell (HSC) activation is the central link in the pathogenesis of hepatic fibrosis. Previously, we showed that kinetin, a plant cytokinin hormone, has a protective effect on CCl4-induced liver injury in mice. However, the role of kinetin in liver fibrosis remains unclear. We aimed to study these protective effects and to determine the mechanisms by which kinetin mediates HSC activation and apoptosis. For this purpose, the human HSC line LX-2 was treated with 10 ng/ml transforming growth factor-ß1 (TGF-ß1) for 24 h to stimulate activation. We found that treatment with kinetin at the sub-cytotoxic dose of 40 µg/ml for 48 h reduced the expression of the HSC activation marker α-SMA and inhibited the secretion of extracellular matrix proteins. In addition, kinetin was found to inhibit the proliferation and migration of LX-2 cells. We found that kinetin induced apoptosis in LX-2 cells by increasing the level of cleaved-caspase 3 and the Bax-to-Bcl-2 ratio. Interestingly, these effect were not observed in quiescent HSCs, suggesting that they are activation-dependent. Further study showed that kinetin attenuates activation and promotes apoptosis of LX-2 cells in vitro in part by suppressing the TGF-ß1/Smad signaling pathway.

Natural variation of MS2 confers male fertility and drives hybrid breeding in soybean.

A complete and genetically stable male sterile line with high outcrossing rate is a prerequisite for the development of commercial hybrid soybean. It was reported in the last century that the soybean male sterile ms2 mutant has the highest record with seed set. Here we report the cloning and characterization of the MS2 gene in soybean, which encodes a protein that is specifically expressed in the anther. MS2 functions in the tapetum and microspore by directly regulating genes involved in the biosynthesis of secondary metabolites and the lipid metabolism, which is essential for the formation of microspore cell wall. Through comparison of the field performance with the widely used male sterile mutants in the same genetic background, we demonstrated that the ms2 mutant conducts the best in outcrossing rate and makes it an ideal tool in building a cost-effective hybrid system for soybean.

Carbene Radicals in Transition-Metal-Catalyzed Reactions.

Discovered as organometallic curiosities in the 1970s, carbene radicals have become a staple in modern-day homogeneous catalysis. Carbene radicals exhibit nucleophilic radical-type reactivity orthogonal to classical electrophilic diamagnetic Fischer carbenes. Their successful catalytic application has led to the synthesis of a myriad of carbo- and heterocycles, ranging from simple cyclopropanes to more challenging eight-membered rings. The field has matured to employ densely functionalized chiral porphyrin-based platforms that exhibit high enantio-, regio-, and stereoselectivity. Thus far the focus has largely been on cobalt-based systems, but interest has been growing for the past few years to expand the application of carbene radicals to other transition metals. This Perspective covers the advances made since 2011 and gives an overview on the coordination chemistry, reactivity, and catalytic application of carbene radical species using transition metal complexes and catalysts.

Mussel-inspired HA@TA-CS/SA biomimetic 3D printed scaffolds with antibacterial activity for bone repair.

Bacterial infection is a major challenge that could threaten the patient's life in repairing bone defects with implant materials. Developing functional scaffolds with an intelligent antibacterial function that can be used for bone repair is very important. We constructed a drug delivery (HA@TA-CS/SA) scaffold with curcumin-loaded dendritic mesoporous organic silica nanoparticles (DMON@Cur) via 3D printing for antibacterial bone repair. Inspired by the adhesion mechanism of mussels, the HA@TA-CS/SA scaffold of hydroxyapatite (HA) and chitosan (CS) is bridged by tannic acid (TA), which in turn binds sodium alginate (SA) using electrostatic interactions. The results showed that the HA@TA-CS/SA composite scaffold had better mechanical properties compared with recent literature data, reaching 68.09 MPa. It displayed excellent degradation and mineralization capabilities with strong biocompatibility in vitro. Furthermore, the antibacterial test results indicated that the curcumin-loaded scaffold inhibited S.aureus and E.coli with 99.99% and 96.56% effectiveness, respectively. These findings show that 3D printed curcumin-loaded HA@TA-CS/SA scaffold has considerable promise for bone tissue engineering.

A rapid magnetic-based purification of Cd2+ and Pb2+ prior to portable electrochemical determination for grain.

How to quickly separate and detect cadmium (Cd2+) and lead (Pb2+) from solid samples is a difficult problem that needs to be solved. For this, Fe3O4@agarose@iminodiacetic acid (IDA) was synthesized and used for rapid purification of Cd2+ and Pb2+. This material can remove complex matrix interference completely within a short time of 15 min. The mechanism of the adsorption kinetics fit well to a pseudo-second-order model. A portable screen-printed electrodes (SPEs)-based electrochemical detection platform was established. After coupling with the pretreatment, the whole detection process only took within 30 min. The limits of detection (LOD) were ten times lower than those of the Codex general standard, with values of 0.02 and 0.01 mg/kg for Pb2+ and Cd2+, respectively. The recoveries ranged from 84.1% to 109.7% in naturally contaminated grain, in good agreement with the ICP-MS, demonstrating great prospects for the rapid screening and monitoring of Cd2+ and Pb2+ in grain.

Understanding Off-Cycle and Deactivation Pathways in Radical-Type Carbene Transfer Catalysis.

Transition metal radical-type carbene transfer catalysis is a sustainable and atom-efficient method to generate C-C bonds, especially to produce fine chemicals and pharmaceuticals. A significant amount of research has therefore been devoted to applying this methodology, which resulted in innovative routes toward otherwise synthetically challenging products and a detailed mechanistic understanding of the catalytic systems. Furthermore, combined experimental and theoretical efforts elucidated the reactivity of carbene radical complexes and their off-cycle pathways. The latter can imply the formation of N-enolate and bridging carbenes, and undesired hydrogen atom transfer by the carbene radical species from the reaction medium which can lead to catalyst deactivation. In this concept paper, we demonstrate that understanding off-cycle and deactivation pathways not only affords solutions to circumvent them, but can also uncover novel reactivity for new applications. In particular, considering off-cycle species involved in metalloradical catalysis can stimulate further development of radical-type carbene transfer reactions.