Additive engineering for Sb2S3 indoor photovoltaics with efficiency exceeding 17.

Indoor photovoltaics (IPVs) have attracted increasing attention for sustainably powering Internet of Things (IoT) electronics. Sb2S3 is a promising IPV candidate material with a bandgap of ~1.75 eV, which is near the optimal value for indoor energy harvesting. However, the performance of Sb2S3 solar cells is limited by nonradiative recombination, which is dependent on the quality of the absorber films. Additive engineering is an effective strategy to fine tune the properties of solution-processed films. This work shows that the addition of monoethanolamine (MEA) into the precursor solution allows the nucleation and growth of Sb2S3 films to be controlled, enabling the deposition of high-quality Sb2S3 absorbers with reduced grain boundary density, optimized band positions, and increased carrier concentration. Complemented with computations, it is revealed that the incorporation of MEA leads to a more efficient and energetically favorable deposition for enhanced heterogeneous nucleation on the substrate, which increases the grain size and accelerates the deposition rate of Sb2S3 films. Due to suppressed carrier recombination and improved charge-carrier transport in Sb2S3 absorber films, the MEA-modulated Sb2S3 solar cell yields a power conversion efficiency (PCE) of 7.22% under AM1.5 G illumination, and an IPV PCE of 17.55% under 1000 lux white light emitting diode (WLED) illumination, which is the highest yet reported for Sb2S3 IPVs. Furthermore, we construct high performance large-area Sb2S3 IPV minimodules to power IoT wireless sensors, and realize the long-term continuous recording of environmental parameters under WLED illumination in an office. This work highlights the great prospect of Sb2S3 photovoltaics for indoor energy harvesting.

Application effect of case management nursing based on patient safety in patients with prostate cancer.

BACKGROUND: Globally, prostate cancer has become a major threat to men's health, with an increasing incidence and causes serious effects on the quality and length of life of patients. Despite the rapid development of medical technology, which provides treatments, including surgery, radiotherapy, and endocrine therapy, the treatment of patients with prostate cancer, especially with endocrine therapy, has become a major challenge in clinical treatment owing to the lengthy course of treatment, side effects of drugs, and impact of the disease on the psychological and physiological functioning of the patient, producing poor treatment adherence and a decline in quality of life. AIM: To explore effects of nursing intervention prioritizing patient safety and case management in patients with prostate cancer undergoing endocrine therapy. METHODS: Eighty patients with prostate cancer who received endocrine therapy at our hospital between January 2022 and January 2024 were divided into observation and control groups with 40 cases per group. The control group was treated using a routine nursing workflow while the observation group received case management nursing guidance prioritizing patient safety. Scores for anxiety and depression, prostate cancer symptoms, and quality of life and patient compliance and satisfaction were compared between the groups after three months of intervention. RESULTS: After the nursing intervention, the anxiety and depression scores of the observation group were significantly lower than those of the control group (P < 0.05). The quality of life score, sexual function, and hormone function were significantly higher than those in the control group (P < 0.05). CONCLUSION: Case management guidance based on patient safety effectively reduced anxiety and depression in patients undergoing endocrine therapy for prostate cancer and improved their quality of life, treatment compliance, and satisfaction.

Composite Superhydrophobic Coating with Transparency and Thermal Insulation for Glass Curtain Walls.

In this paper, the preparation of a transparent superhydrophobic composite coating with a thermal insulation function using antimony-doped tin oxide (ATO) nanoparticles is proposed, which has advantages of being mass-producible and low-cost. In short, nanosilica and ATO are used as raw materials for constructing rough structures, and superhydrophobic coatings are obtained by mixing and adding binders after modification of each, which are then applied to the surface of various substrates by spraying to obtain a transparent superhydrophobic coating with a heat-insulating function. The specific role of each nanoparticle is discussed through comparative experiments that illustrate the mechanism by which the two particles construct rough structures. The coating achieves unique thermal insulation properties while possessing excellent superhydrophobicity (WCA of ∼163° and WSA of ∼3°) and high light transmission (∼70%). Heat-shielding experiments have demonstrated that the composite coating effectively reduces the room temperature by approximately 19% for the same irradiation time. The coating achieves a balanced improvement in visible transmittance, thermal insulation, and superhydrophobicity. In addition, the coating's self-cleaning properties, mechanical properties, chemical weathering resistance, high-temperature resistance, and anti-icing properties were verified through various experiments.

Unraveling the energy storage mechanism in graphene-based nonaqueous electrochemical capacitors by gap-enhanced Raman spectroscopy.

Graphene has been extensively utilized as an electrode material for nonaqueous electrochemical capacitors. However, a comprehensive understanding of the charging mechanism and ion arrangement at the graphene/electrolyte interface remain elusive. Herein, a gap-enhanced Raman spectroscopic strategy is designed to characterize the dynamic interfacial process of graphene with an adjustable number of layers, which is based on synergistic enhancement of localized surface plasmons from shell-isolated nanoparticles and a metal substrate. By employing such a strategy combined with complementary characterization techniques, we study the potential-dependent configuration of adsorbed ions and capacitance curves for graphene based on the number of layers. As the number of layers increases, the properties of graphene transform from a metalloid nature to graphite-like behavior. The charging mechanism shifts from co-ion desorption in single-layer graphene to ion exchange domination in few-layer graphene. The increase in area specific capacitance from 64 to 145 µF cm-2 is attributed to the influence on ion packing, thereby impacting the electrochemical performance. Furthermore, the potential-dependent coordination structure of lithium bis(fluorosulfonyl) imide in tetraglyme ([Li(G4)][FSI]) at graphene/electrolyte interface is revealed. This work adds to the understanding of graphene interfaces with distinct properties, offering insights for optimization of electrochemical capacitors.

Interaction of Th17 differentiations-related gene polymorphisms and environmental factors contributing to the disease classification, complications, and surgical risks of Crohn's disease in the Chinese Han population.

OBJECTIVES: Few studies have been conducted on gene-environment interactions in the Chinese population with Crohn's disease (CD). We aimed to investigate the association between single nucleotide polymorphisms (SNPs) on the T helper 17 (Th17) cell and CD susceptibility/performance in Chinese individuals. METHODS: We conducted a case-control and case-only study at the Peking Union Medical College Hospital. Four SNPs related to the Th17 cell pathway genes were prioritized, including rs2284553 (interferon gamma receptor 2), rs7517847 (interleukin 23 receptor), rs7773324 (interferon regulatory factor 4), and rs4263839 (tumor necrosis factor superfamily 15). SNP frequency was calculated, and gene-environment interaction was assessed by multifactor dimensionality reduction analysis. RESULTS: Altogether 159 CD patients and 316 healthy controls were included. All analyzed SNPs were found in Hardy-Weinberg equilibrium (P > 0.05). The frequency of rs2284553-A allele and rs4263839-A allele were lower in CD patients compared with controls (P < 0.05). While the rs4263839-A allele was more prevalent in ileocolonic CD patients than in those with isolated small intestinal or colonic disease (P = 0.035). Gene-environment interactions revealed associations between rs2284553 and breastfeeding, sunshine exposure, and fridge-stored food, affecting age at diagnosis, intestinal involvement, and intestinal stricture. Interaction of rs4263839 and breastfeeding influenced small intestinal lesions and intestinal stricture in CD. CONCLUSIONS: This study provided information on the genetic background in Chinese CD patients. Incorporating these SNPs into predictive models may improve risk assessment and outcome prediction. Gene-environment interaction contributes to the understanding of CD pathogenesis.

SHG Assisted Mixed-Phases Anatomizing in a Molecular Ferroelectric.

Anatomizing mixed-phases, referring to analyzing the mixing profiles and quantifying the phases' proportions in a material, which is of great significance in the genuine applications. Here, by using second-harmonic generation (SHG) polarimetry and piezoresponse force microscopy (PFM) techniques, this work elucidates the contributions and distributions of two different symmetric phases mixed in an archetype monoaxial molecular ferroelectric, diisopropylammonium chloride (DIPACl). The two competing phases are preferred in thermodynamics or kinetic process respectively, and this work evidences the switching behavior between the two competing phases facilitated by an external electrical field as opposed to a heating process. This research contributes novel insights into phase engineering in the field of molecular ferroelectrics and is poised to serve as a potent analytical tool for subsequent applications.

Mechanical Bond Induced Enhancement and Purification of Pyrene Emission in the Solid State.

To address key concerns on solid-state pyrene-based luminescent materials, we propose a novel and efficient mechanical bond strategy. This strategy results in a transformation from ACQ to AIE effect and a remarkable enhancement of pyrene emission in the solid state. Moreover, an unusual purification of emission is also achieved. Through computational calculation and experimental characterisation, finally determined by X-ray diffraction analysis, we prove that the excellent emissions result from mechanical bond induced refinement of molecular arrangements, including reduced π-π stacking, well-ordered packing and enhanced structural stability. This work demonstrates the potential of mechanical bond in the field of organic luminescent molecules, providing a new avenue for developing high-performance organic luminescent materials.

The past 10 years of molecular ferroelectrics: structures, design, and properties.

Ferroelectricity, which has diverse important applications such as memory elements, capacitors, and sensors, was first discovered in a molecular compound, Rochelle salt, in 1920 by Valasek. Owing to their superiorities of lightweight, biocompatibility, structural tunability, mechanical flexibility, etc., the past decade has witnessed the renaissance of molecular ferroelectrics as promising complementary materials to commercial inorganic ferroelectrics. Thus, on the 100th anniversary of ferroelectricity, it is an opportune time to look into the future, specifically into how to push the boundaries of material design in molecular ferroelectric systems and finally overcome the hurdles to their commercialization. Herein, we present a comprehensive and accessible review of the appealing development of molecular ferroelectrics over the past 10 years, with an emphasis on their structural diversity, chemical design, exceptional properties, and potential applications. We believe that it will inspire intense, combined research efforts to enrich the family of high-performance molecular ferroelectrics and attract widespread interest from physicists and chemists to better understand the structure-function relationships governing improved applied functional device engineering.

Organic-Inorganic Hybrid Perovskite Ferroelectric Nanosheets Synthesized by a Room-Temperature Antisolvent Method.

Over the past years, the application potential of ferroelectric nanomaterials with unique physical properties for modern electronics is highlighted to a large extent. However, it is relatively challenging to fabricate inorganic ferroelectric nanomaterials, which is a process depending on a vacuum atmosphere at high temperatures. As significant complements to inorganic ferroelectric nanomaterials, the nanomaterials of molecular ferroelectrics are rarely reported. Here a low-cost room-temperature antisolvent method is used to synthesize free-standing 2D organic-inorganic hybrid perovskite (OIHP) ferroelectric nanosheets (NSs), that is, (CHA)2PbBr4 NSs (CHA = cyclohexylammonium), with an average lateral size of 357.59 nm and a thickness ranging from 10 to 70 nm. This method shows high repeatability and produces NSs with excellent crystallinity. Moreover, ferroelectric domains in single NSs can be clearly visualized and manipulated using piezoresponse force microscopy (PFM). The domain switching and PFM-switching spectroscopy indicate the robust in-plane ferroelectricity of the NSs. This work not only introduces a feasible, low-cost, and scalable method for preparing molecular ferroelectric NSs but also promotes the research on molecular ferroelectric nanomaterials.

Dnttip2 is essential for 18S rRNA processing and digestive organ development in zebrafish.

Dnttip2 is one of the components of the small subunit (SSU) processome. In yeast, depletion of dnttip2 leads to an inefficient processing of pre-rRNA and a decrease in synthesis of the mature 18S rRNA. However, the biological roles of Dnttip2 in higher organisms are poorly defined. In this study, we demonstrate that dnttip2 is a maternal gene in zebrafish. Depletion of Dnttip2 leads to embryonic lethal with severe digestive organs hypoplasia. The loss of function of Dnttip2 also leads to partial defects in cleavage at the A0-site and E-site during 18S rRNA processing. In conclusion, Dnttip2 is essential for 18S rRNA processing and digestive organ development in zebrafish.

Inhibiting MMP13 Attenuates Deep Vein Thrombosis in a Mouse Model by Reducing the Expression of Pdpn.

OBJECTIVE: Matrix metalloproteinase 13 (MMP13) is an extracellular matrix protease that affects the progression of atherosclerotic plaques and arterial thrombi by degrading collagens, modifying protein structures and regulating inflammatory responses, but its role in deep vein thrombosis (DVT) has not been determined. The purpose of this study was to investigate the potential effects of MMP13 and MMP13-related genes on the formation of DVT. METHODS: We altered the expression level of MMP13 in vivo and conducted a transcriptome study to examine the expression and relationship between MMP13 and MMP13-related genes in a mouse model of DVT. After screening genes possibly related to MMP13 in DVT mice, the expression levels of candidate genes in human umbilical vein endothelial cells (HUVECs) and the venous wall were evaluated. The effect of MMP13 on platelet aggregation in HUVECs was investigated in vitro. RESULTS: Among the differentially expressed genes, interleukin 1 beta, podoplanin (Pdpn), and factor VIII von Willebrand factor (F8VWF) were selected for analysis in mice. When MMP13 was inhibited, the expression level of PDPN decreased significantly in vitro. In HUVECs, overexpression of MMP13 led to an increase in the expression level of PDPN and induced platelet aggregation, while transfection of PDPN-siRNA weakened the ability of MMP13 to increase platelet aggregation. CONCLUSIONS: Inhibiting the expression of MMP13 could reduce the burden of DVT in mice. The mechanism involves downregulating the expression of Pdpn through MMP13, which could provide a novel gene target for DVT diagnosis and treatment.

Clinical implications of PD-L1 expression and pathway-related molecular subtypes in advanced Asian colorectal cancer patients.

The expression level of PD-L1 does not accurately predict the prognosis of advanced colorectal cancer (CRC) patients, but it still reflects the tumor microenvironment to some extent. By stratifying PD-L1 status, gene subtypes in PD-L1 positivity-related pathological pathways were analyzed for their relationship to MSI or TMB to provide more individualized treatment options for CRCs. A total of 752 advanced CRCs were included, and their genomic variance was measured by a targeted next generation sequencing panel in this study. MSI and TMB were both measured by NGS, while PD-L1 expression level was measured using the PD-L1 colon 22C3 pharmDx kit. We found RTK/RAS pathway was positively related to high PD-L1 expression, with BRAF V600E and most KRAS mutations (G12 and G13) subtypes showing a significant correlation. Conversely, the Wnt and p53 pathways were negatively related to high PD-L1 expression, with APC C-terminal alterations and other non-inactivation mutations in TP53 making a primary contribution with significant statistical significance. Major subtypes showing a significantly higher proportion of TMB-H or MSI-H were irrespective of PD-L1 status. These findings demonstrate pathological pathways associated with high PD-L1 expression, suggesting that pathway-induced oncogenic constructive PD-L1 upregulation may be the reason for the corresponding patients' primary resistance to immune checkpoint inhibitors (ICIs), rather than a lack of pre-existing immune responses.

Application of Non-Ligation Technique in Thyroidectomy.

Objective: This study aimed to analyze the difference between non-ligation and traditional ligation techniques for papillary thyroid micro-carcinoma (PTMC) patients. Methods: Patients undergoing thyroidectomy in the Department of General Surgery, Ruijin Hospital, affiliated with Shanghai Jiao Tong University, Lu Wan Branch, were retrospectively enrolled. The gender, age, operation method, operation duration, tumor size, size of thyroidectomy specimen, postoperative bleeding, drainage volume on the first postoperative day, preoperative and postoperative levels of parathyroid hormone (PTH), and blood calcium were collected. Results: Compared with the traditional ligation technique, the non-ligation technique significantly shortened the operation time (69.36 ± 1.38 vs. 82.72 ± 2.12, P < .0001) and reached less variation of the serum calcium (2.32 ± 0.01 vs 2.28 ± 0.01, P < .001) and PTH (26.58 ± 0.08 vs 22.01 ± 1.04, P < .05) on the first postoperative day, and the above biochemical indicators returned to normal 3 weeks after surgery. The PTH in the No-ligation technique group was 7.20± 1.99, which was significantly lower than that in the Traditional ligation group (20.78± 3.78) (P < .01). Conclusion: No-ligation technique can significantly reduce the operation time in thyroidectomy but may temporarily affect the levels of parathyroid hormone and blood calcium, and the above changes returned to normal 3 weeks after surgery. These results highlighted that No-ligation technique can benefit patients and will be a favorable treatment method.

Delayed intestinal perforation associated with peritoneal dialysis: A case report of maintaining dialysis after perforation.

Delayed intestinal perforation has various manifestations. For peritonitis with delayed treatment and multi-bacterial peritonitis, we should be alert to the occurrence of this rare complication. Abdominal CT examination and imaging results judgment based on clinical conditions are particularly important for diagnosis. Delayed intestinal perforation of peritoneal dialysis catheter is a rare but serious complication. We reported a 49-year-old patient who had been hospitalized twice within 3 months due to poor drainage of the peritoneal dialysis catheter. During the first hospitalization, peritoneal dialysis-related peritonitis was diagnosed, and a variety of bacterial infections were cultivated. However, at that time, the actual peritoneal dialysis catheter-related intestinal perforation was missed, and he was discharged after anti-infection treatment until a clinical cure was met. After more than 2 months of normal peritoneal dialysis after returning home, the patient again had poor drainage of the peritoneal dialysis catheter, accompanied by the outflow of yellowish-brown sediment. It was found that the peritoneal dialysis catheter had evidence of intestinal perforation. After the removal of the catheter and intestinal repair, he recovered and was discharged from the hospital and received long-term hemodialysis treatment. In the case of delayed intestinal perforation, peritoneal dialysis was maintained normally for more than 2 months, which was an unprecedented situation in previous case reports. In addition, we should be alert to the occurrence of this rare complication, especially when we find the occurrence of polybacterial Peritonitis. Abdominal CT examination and imaging results judgment based on clinical conditions are particularly important for diagnosis.

Angiogenic and Fibrogenic Dual-effect of Gremlin1 on Proliferative Diabetic Retinopathy.

Ocular angiogenic diseases, such as proliferative diabetic retinopathy (PDR), are often characterized by pathological new vessels and fibrosis formation. Anti-vascular endothelial growth factor (VEGF) therapy, despite of its efficiency to inhibit new vessels, has limitations, including drug resistance and retinal fibrosis. Here, we identified that Gremlin1, a novel angiogenesis and fibrosis inducer, was secreted from Müller glial cells, and its expression increased in the vitreous fluid from patients with PDR. Mechanistically, Gremlin1 triggered angiogenesis by promoting endothelial-mesenchymal transition via the EGFR/RhoA/ROCK pathway. In addition, Gremlin1 activated microglia to present profibrotic and fibrogenic properties. Further, anti-Gremlin1 antibody inhibited ocular angiogenesis and microglia fibrosis in mouse models. Collectively, Gremlin1 could be a potential therapeutic target in the treatment of ocular angiogenic diseases.

Mucin-1-Targeted Chimeric Antigen Receptor T Cells Are Effective and Safe in Controlling Solid Tumors in Immunocompetent Host.

The chimeric antigen receptor (CAR) T-cell therapy in solid epithelial tumors has been explored, however, with limited success. As much of the preclinical work has relied on xenograft models in immunocompromised animals, the immune-related efficacies and toxicities may have been missed. In this study, we engineered syngeneic murine CAR T cells targeting the tumor form of human mucin-1 (tMUC1) and tested the MUC1 CAR T cells' efficacy and toxicity in the immunocompetent human MUC1-expressing mouse models. The MUC1 CAR T cells significantly eliminated murine pancreatic and breast cancer cell lines in vitro. In vivo, MUC1 CAR T cells significantly slowed the mammary gland tumor progression in the spontaneous PyVMT×MUC1.Tg (MMT) mice, prevented lung metastasis, and prolonged survival. Most importantly, there was minimal short or long-term toxicity with acceptable levels of transient liver toxicity but no kidney toxicity. In addition, the mice did not show any signs of weight loss or other behavioral changes with the treatment. We also report that a single dose of MUC1 CAR T-cell treatment modestly reduced the pancreatic tumor burden in a syngeneic orthotopic model of pancreatic ductal adenocarcinoma given at late stage of an established tumor. Taken together, these findings suggested the further development of tMUC1-targeted CAR T cells as an effective and relatively safe treatment modality for various tMUC1-expressing solid tumors.

Volume-Confined Fabrication of Large-Scale Single-Crystalline Molecular Ferroelectric Thin Films and Their Applications in 2D Materials.

With outstanding advantages of chemical synthesis, structural diversity, and mechanical flexibility, molecular ferroelectrics have attracted increasing attention, demonstrating themselves as promising candidates for next-generation wearable electronics and flexible devices in the film form. However, it remains a challenge to grow high-quality thin films of molecular ferroelectrics. To address the above issue, a volume-confined method is utilized to achieve ultrasmooth single-crystal molecular ferroelectric thin films at the sub-centimeter scale, with the thickness controlled in the range of 100-1000 nm. More importantly, the preparation method is applicable to most molecular ferroelectrics and has no dependency on substrates, showing excellent reproducibility and universality. To demonstrate the application potential, two-dimensional (2D) transitional metal dichalcogenide semiconductor/molecular ferroelectric heterostructures are prepared and investigated by optical spectroscopic method, proving the possibility of integrating molecular ferroelectrics with 2D layered materials. These results may unlock the potential for preparing and developing high-performance devices based on molecular ferroelectric thin films.

Preparation of betaine injection and its therapeutic effect in pulmonary arterial hypertension.

Pulmonary arterial hypertension (PAH) is a life-threatening disease characterised by elevated pulmonary pressure, right ventricular failure (RVF) and ultimately death. Aggressive treatment of RVF is considered an important therapeutic strategy to treat PAH. Previous studies have indicated that betaine may be may a promising therapeutic approach for PAH-induced RVF. Therefore, in this study, betaine solution for injection was prepared and characterised using various techniques. The therapeutic efficacy of three different methods of administration (intragastric, nebulised inhalation and intravenous injection) were comprehensively evaluated in terms of pharmacokinetics, tissue distribution and pharmacodynamics. The pharmacokinetic results demonstrated that betaine injection administered via nebulised inhalation significantly prolonged betaine's half-life and increased its internal circulation time compared to the intragastric and intravenous routes. Biodistribution experiments verified that the betaine formulation accumulated in the lung tissue when administered via inhalation. The results of the pharmacodynamic analysis further confirmed that right ventricular systolic pressure, mean pulmonary artery pressure and right ventricular hypertrophy index increased in the model group and that inhaled betaine suppressed these pathological changes to a level comparable to those observed in the control group. Taken together, these results indicate that betaine administered by inhalation is a promising strategy for the treatment of PAH-induced RVF.

Grain Engineering of Sb2 S3 Thin Films to Enable Efficient Planar Solar Cells with High Open-Circuit Voltage.

Sb2 S3 is a promising environmentally friendly semiconductor for high performance solar cells. But, like many other polycrystalline materials, Sb2 S3 is limited by nonradiative recombination and carrier scattering by grain boundaries (GBs). This work shows how the GB density in Sb2 S3 films can be significantly reduced from 1068 ± 40 to 327 ± 23 nm µm-2 by incorporating an appropriate amount of Ce3+ into the precursor solution for Sb2 S3 deposition. Through extensive characterization of structural, morphological, and optoelectronic properties, complemented with computations, it is revealed that a critical factor is the formation of an ultrathin Ce2 S3 layer at the CdS/Sb2 S3 interface, which can reduce the interfacial energy and increase the adhesion work between Sb2 S3 and the substrate to encourage heterogeneous nucleation of Sb2 S3 , as well as promote lateral grain growth. Through reductions in nonradiative recombination at GBs and/or the CdS/Sb2 S3 heterointerface, as well as improved charge-carrier transport properties at the heterojunction, this work achieves high performance Sb2 S3 solar cells with a power conversion efficiency reaching 7.66%. An impressive open-circuit voltage (VOC ) of 796 mV is achieved, which is the highest reported thus far for Sb2 S3 solar cells. This work provides a strategy to simultaneously regulate the nucleation and growth of Sb2 S3 absorber films for enhanced device performance.

Efficacy of rhizobacteria Paenibacillus polymyxa SY42 for the biological control of Atractylodes chinensis root rot.

Atractylodes chinensis is one of the most commonly used bulk herbs in East Asia; however, root rot can seriously affect its quality and yields. In contrast to chemical pesticides, biological control strategies are environmentally compatible and safe. For this study, 68 antagonistic bacterial strains were isolated from the rhizospheres of healthy Atractylodes chinensis. Strain SY42 exhibited the most potent fungicidal activities, with inhibition rates against F. oxysporum, F. solani, and F. redolens of 67.07 %, 63.40 % and 68.45 %, respectively. Through morphological observation and molecular characterization, strain SY42 was identified as Paenibacillus polymyxa. The volatile organic components (VOCs) produced by SY42 effectively inhibited the mycelial growth of pathogenic fungi through diffusion. SY42 significantly inhibited the germination of pathogenic fungal spores. Following co-culturing with SY42, the mycelium of the pathogenic fungus was deformed, folded, and even ruptured. SY42 could produce cellulases and proteases to degrade fungal cell walls. Pot experiments demonstrated the excellent biocontrol efficacy of SY42. This study revealed that P. polymyxa SY42 inhibited pathogenic fungi through multiple mechanisms, which verified its utility as a biocontrol agent for the control of A. chinensis root rot.