Aqueous synthesis of perovskite precursors for highly efficient perovskite solar cells.

High-purity precursor materials are vital for high-efficiency perovskite solar cells (PSCs) to reduce defect density caused by impurities in perovskite. In this study, we present aqueous synthesized perovskite microcrystals as precursor materials for PSCs. Our approach enables kilogram-scale mass production and synthesizes formamidinium lead iodide (FAPbI3) microcrystals with up to 99.996% purity, with an average value of 99.994 ± 0.0015%, from inexpensive, low-purity raw materials. The reduction in calcium ions, which made up the largest impurity in the aqueous solution, led to the greatest reduction in carrier trap states, and its deliberate introduction was shown to decrease device performance. With these purified precursors, we achieved a power conversion efficiency (PCE) of 25.6% (25.3% certified) in inverted PSCs and retained 94% of the initial PCE after 1000 hours of continuous simulated solar illumination at 50°C.

Tuning Perovskite Surface Polarity via Dipole Moment Engineering for Efficient Hole-Transport-Layer-Free Sn-Pb Mixed-Perovskite Solar Cells.

Post-treatment has been recognized as one of the effective methods for passivating the underlying defects in perovskite solar cells (PSCs), but little attention has been paid to how to pick suitable passivation agents with diverse isomers for efficient PSCs, particularly for the tin-lead (Sn-Pb) mixed PSCs. Here, we introduce the dependence of the power conversion efficiency (PCE) on a dipole moment for surface passivator screening, in which we chose three trifluoromethyl-phenylethylamine hydroiodide (CF3-PEAI) isomers as surface-treatment materials for hole-transport-layer-free (HTL-free) Sn-Pb mixed PSCs. The different positions of the -CF3 group for the CF3-PEAI isomer result in different dipole moments, which influences the interaction between CF3-PEAI and lead iodide. The para position CF3 with the highest dipole moment exhibits a higher PCE than the ortho-position with a lower dipole moment, which is attributed to the large dipole moment on the surface that could tune the surface polarity from p-type to n-type, facilitating electron charge transport in the HTL-free Sn-Pb mixed PSCs. An ultrathin 2D layer is formed on the perovskite surface to passivate the surface defects, which is responsible for the enhancement of the PCE and stability of the PSCs. As a result, the open-circuit voltage (VOC) of the device is improved from 0.775 to 0.824 V, yielding a champion PCE of 20.17%, which is one of the highest PCEs among the reported HTL-free Sn-Pb mixed PSCs. The device also shows improved stability with remaining 75% of its initial PCEs after storage in N2 for 700 h.

Machine learning guided microwave-assisted quantum dot synthesis and an indication of residual H2O2 in human teeth.

The current preparation methods of carbon quantum dots (CDs) involve many reaction parameters, which leads to many possibilities in the synthesis processes and high uncertainty of the resultant production performance. Recently, machine learning (ML) methods have shown great potential in correlating the selected features in many applications, which can help understand the relevant structure-function relationships of CDs and discover better synthesis recipes as well. In this work, we employ the ML approach to guide the blue CD synthesis in microwave systems. After optimizing the synthesis parameters and conditions, the quantum yield (QY) increases to about 200% higher than the average value of the prepared samples without ML guidance. The obtained CDs are applied as fluorescent probes to monitor hydrogen peroxide (H2O2) in human teeth. The CD probe exhibits a linear relationship with the concentration of H2O2 ranging from 0 to 1.1 M with a lower detection limit of 0.12 M, which can effectively detect the residual H2O2 after bleaching teeth. This work shows that the adopted ML methods have considerable advantages in guiding the synthesis of high-quality CDs, which could accelerate the development of other novel functional materials in energy, biomedical, and environmental remediation applications.

Mn3+/Mn4+ ion-doped carbon dots as fenton-like catalysts for fluorescence dual-signal detection of dopamine.

Carbon dots (CDs), a new zero-dimensional material, have ignited a revolution in the fields of sensing, bioimaging, and biomedicine. However, the difficulty of preparing CDs with Fenton-like catalytic properties has seriously hindered their application in the diagnosis of oxidation/reduction biomolecules or metal ions. Here, an innovative method was successfully established to synthesize Mn3+/Mn4+ ion-doped blue-green fluorescent CDs with Fenton-like catalytic properties using manganese acetate as the manganese source. Specifically, the CDs prepared here were equipped with functional groups of -COOH, NH2, C=O, and Mn-O, offering the possibility to function as a fluorescence sensor. More importantly, the introduction of manganese acetate resulted in the preparation of CDs with Fenton-like catalytic properties, and the dual-signal fluorescence detection of dopamine (DA) was realized with linear ranges of 100-275 nM and 325-525 nM, and the detection limits were 3 and 12 nM, respectively. In addition, due to the Fenton-like catalytic activity of Mn3+/Mn4+ ion-doped CDs, the material has broad application prospects in the detection of oxidation/reduction biomolecules or metal ions related to disease diagnosis and prevention.

Carbon Dots in Biomedicine: A Review.

Despite the rapid development of science and technology, the effective treatment of cancer still threatens human life and health. However, the success of cancer treatment is closely related to early diagnosis, identification, and effective treatment. In recent years, with the strengthening of the development and research of nanomaterials for cancer diagnosis and treatment, researchers have found that carbon dots (CDs) have the advantages of wide absorption, excellent biocompatibility, diverse imaging characteristics, and photostability and are widely used in various fields, such as sensing, imaging, and drug/gene transportation. Recently, researchers also discovered that CDs could be used as an effective photosensitizer to generate active oxygen or convert light energy into heat under the stimulation of the external lasers, making them have the effects of photothermal and photodynamic therapy for cancer. In this review, we first outline the single-modal and multimodal imaging analysis of CDs in cancer cells. After introducing diversified imaging functions, we focused on the design and the latest research progress of CDs in phototherapy and introduced in detail the strategies of CDs in phototherapy treatment and the challenges faced by clinical applications. We hope that this overview can provide important insights for researchers and accelerate the pace of research on CDs in imaging-guided phototherapy treatment.

Hollow mesoporous polydopamine nanospheres: synthesis, biocompatibility and drug delivery.

Various polydopamine (PDA) nanospheres were synthesized by utilizing triblock copolymer Pluronic F127 and 1,3,5-trimethylbenzene (TMB) as soft templates. Precise morphology control of polydopamine nanospheres was realized from solid polydopamine nanospheres to hollow polydopamine nanospheres, mesoporous polydopamine nanospheres and hollow mesoporous polydopamine nanospheres (H-MPDANSs) by adjusting the weight ratio of TMB to F127. The inner diameter of the prepared H-MPDANSs can be controlled in the range of 50-100 nm, and the outer diameter is about 180 nm. Furthermore, the thickness of hollow mesoporous spherical shell can be adjusted by changing the amount of dopamine (DA). The H-MPDANSs have good biocompatibility, excellent photothermal properties, high drug loading capacity, and outstanding sustainable drug release properties. In addition, both NIR laser irradiation and acid pH can facilitate the controlled release of doxorubicin (DOX) from H-MPDANSs@DOX.

Near-infrared emission Cu, N-doped carbon dots for human umbilical vein endothelial cell labeling and their biocompatibility in vitro.

Quantum dots (QDs) are luminescent semiconductor nanomaterials (NMs) with various biomedical applications, but the high toxicity associated with traditional QDs, such as Cd-based QDs, limits their uses in biomedicine. As such, the development of biocompatible metal-free QDs has gained extensive research interests. In this study, we synthesized near-infrared emission Cu, N-doped carbon dots (CDs) with optimal emission at 640 nm and a fluorescence quantum yield of 27.1% (in N,N-dimethylformamide [DMF]) by solvothermal method using o-phenylenediamine and copper acetate monohydrate. We thoroughly characterized the CDs and showed that they were highly fluorescent and stable under different conditions, although in highly acidic (pH = 1-2) or alkaline (pH = 12-13) solutions, a redshift or blueshift of fluorescence emission peak of Cu, N-doped CDs was also observed. When exposed to human umbilical vein endothelial cells (HUVECs), Cu, N-doped CDs only significantly induced cytotoxicity at very high concentrations (100 or 200 µg/ml), but their cytotoxicity appeared to be comparable with carbon black (CB) nanoparticles (NPs) at the same mass concentrations. As the mechanisms, 200 µg/ml Cu, N-doped CDs and CB NPs promoted endoplasmic reticulum (ER) stress proteins IRE1α and chop, leading to increased cleaved caspase 3/pro-caspase 3 ratio, but CB NPs were more effective. At noncytotoxic concentration (50 µg/ml), Cu, N-doped CDs successfully labeled HUVECs. In summary, we successfully prepared highly fluorescent and relatively biocompatible CDs to label HUVECs in vitro.

Porphyrin-terminated nanoscale fluorescent polyrotaxane as a biodegradable drug carrier for anticancer research.

Drug delivery carriers hold tremendous promise for improving cancer treatment, and polyrotaxane (PR) has shown excellent drug-carrying properties. However, there have been some reports that, when used as a drug carrier, water-soluble PR is not easily labeled with organic fluorescent dyes. Herein, we synthesized a drug-loaded fluorescent porphyrin-terminated PR (PR-COOH) which can be used as a tracer material in drug and gene delivery. The structure, morphology and zeta potential of PR-COOH were characterized by nuclear magnetic resonance, high-resolution transmission electron microscopy and zeta potentiometry. In this research, cisplatin (CDDP) is used as a model drug. The zeta potential, drug encapsulation efficiency and drug release of CDDP-loaded PR (PR-COOH-Pt) were studied. Confocal laser scanning microscopy showed that PR-COOH could be internalized by HeLa and CT26 cells. The antitumor efficacy of PR-COOH-Pt was investigated in vitro by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and in vivo by a xenograft tumor model. The results showed that PR-COOH-Pt could significantly inhibit tumor growth; thus PR-COOH-Pt has a promising role in cancer therapy.

Dual-Response Detection of Oxidized Glutathione, Ascorbic Acid, and Cell Imaging Based on pH/Redox Dual-Sensitive Fluorescent Carbon Dots.

The pH/redox dual-sensitive fluorescent carbon dots (pHRCDs) with the fluorescence quantum yield of 16.97% were synthesized by the pyrolysis of l-glutamic acid (l-glu) and dopamine (DA). Compared with the quantum dot (QD)-dopamine conjugate, when the pH value of the solution was changed from neutral to alkaline, the pHRCDs exhibited unique optical phenomenon including red-shift of fluorescence peak and the fluorescence intensity first decreasing from pH 7 to 10 and then increasing from pH 10 to 13. The pHRCDs could be developed for a discriminative and highly sensitive dual-response fluorescent probe for the detection of oxidized glutathione (GSSG) and ascorbic acid (AA) activity in human blood. Under the optimized experimental conditions, the dual-response fluorescent probe can detect GSSG and AA in the linear range of 1.2-3.6 and 27-35 µM with the detection limits of 0.1 and 3.1 µM, respectively. In addition, the pHRCDs demonstrated low cytotoxicity and good biocompatibility, which can be well applied to in vitro cell imaging, and the pHRCDs/GSH fluorescence system has been successfully developed for the detection of AA in real samples.