Acetylated adipate of retrograded starch as RS 3/4 type resistant starch.

This study was aimed at producing acetylated adipate of retrograded starch (ADA-R) with various degrees of substitution with functional groups and at determining the effect of esterification degree on resistance and pasting characteristics of the produced preparations. Paste was prepared from native potato starch, and afterwards frozen and defrosted. After drying and disintegration, the paste was acetylated and crosslinked using various doses of reagents. An increase in the total degree of esterification of the produced ADA-R-preparation caused an increase in its resistance to the action of amyloglucosidase. Viscosity of the paste produced from ADA-R-preparation in a wide range of acetylation degrees was increasing along with increasing crosslinking of starch. The study demonstrated that acetylated adipate of retrograded starch may be classified as a preparation of RS 3/4 type resistant starch (retrograded starch/chemically-modified starch) with good texture-forming properties. The conducted modification offers the possibility of modeling the level of resistance of the produced preparation.

Current research addressing starch acetylation.

Though modification of starch through acetylation is known for about 150years, it is still an object of extensive studies at various research centers worldwide. This manuscript presents an overview of literature from the last 5years concerning starch acetylation. It also describes the applied raw materials, production procedures of acetylated starch and correlations between the degree of substitution with acetyl groups and properties of the modified preparations.

Effect of cross-linking degree on selected properties of retrograded starch adipate.

The aim of this study was to determine the effects of the concentration of paste used to produce retrograded starch, and esterification degree, on selected properties of the resultant distarch adipate. Starch paste was prepared from native potato starch (1, 4, 10, 18 or 30 g/100g), frozen, defrosted and dried. Thus produced preparations of retrograded starch were cross-linked with various doses of a cross-linking agent (0.125, 0.25, 0.5, 1.0 or 2.0 ml per 100g of starch). Properties of the produced adipates depended on both the concentration of paste used to produce retrograded starch and the degree of substitution with adipic acid residues. Solubility in water and swelling power of the cross-linked preparations of retrograded starch, as well as pasting temperature and viscosity of produced pastes, all decreased along with the increasing degree of substitution with adipic acid residues.

Selected properties of acetylated adipate of retrograded starch.

Native potato starch (NS) and retrograded starch (R - obtained via freezing and defrosting of a starch paste) were used to prepare starch acetates: NS-A and R-A, and then acetylated distarch adipates: NS-ADA and R-ADA. The chemically-modified preparations produced from retrograded starch (R-A; R-ADA) were characterized by a higher degree of esterification compared to the modified preparations produced under the same conditions from native potato starch (NS-A; NS-ADA). Starch resistance to amylolysis was observed to increase (to 30-40 g/100 g) as a result of starch retrogradation and acetylation. Starch cross-linking had a significant impact on the increased viscosity of the paste in the entire course of pasting characteristics and on the increased values of rheological coefficients determined from the equations describing flow curves. The produced preparation of acetylated retrograded starch cross-linked with adipic acid (R-ADA) may be deemed an RS3/4 preparation to be used as a food thickening agent.

Properties of retrograded and acetylated starch produced via starch extrusion or starch hydrolysis with pullulanase.

The aim of the present study was to determine the impact of serial modifications of starch, including firstly starch extrusion or hydrolysis with pullulanase, followed by retrogradation (through freezing and defrosting of pastes) and acetylation (under industrial conditions), on its susceptibility to amylolysis. The method of production had a significant effect on properties of the resultant preparations, whilst the direction and extent of changes depended on the type of modification applied. In the produced starch esters, the degree of substitution, expressed by the per cent of acetylation, ranged from 3.1 to 4.4 g/100 g. The acetylation had a significant impact on contents of elements determined with the atomic emission spectrometry, as it contributed to an increased Na content and decreased contents of Ca and K. The DSC thermal characteristics enabled concluding that the modifications caused an increase in temperatures and a decrease in heat of transition (or its lack). The acetylation of retrograded starch preparations increased their solubility in water and water absorbability. The modifications were found to exert various effects on the rheological properties of pastes determined based on the Brabender's pasting characteristics and flow curves determined with the use of an oscillatory-rotating viscosimeter. All starch acetates produced were characterized by ca. 40% resistance to amylolysis.

Effect of preparation method on the properties of potato starch acetates with an equal degree of substitution.

Acetylated retrograded starch is one of the forms of resistant starch (RS3/4). Apart from the known resistance to amylolysis, it is characterized by the capability to form viscous pastes. Properties of this type of acetates are mainly determined by the degree of substitution and raw material used for esterification. The objective of this study was to produce starch acetates with a degree of substitution DS=0.1 from native potato starch and retrograded potato starch, and to compare selected properties of the resultant preparations. Retrograded starch was produced by freezing pastes with concentrations of 1, 4, 10, 18 or 30 g/100 g. Starch acetates with a degree of substitution DS∼0.1 were produced from native or retrograded starch through acetylation with various doses of acetic acid anhydride (6.5-26.0 cm(3)/100 g of starch). The preparations produced were characterized by various properties. A positive correlation was observed between resistance to amylolysis and the number of acetyl groups at C2 and C3 the produced starch acetates.

Effect of the production method on the properties of RS3/RS4 type resistant starch. Part 1: properties of retrograded starch (RS3) produced under various conditions and its susceptibility to acetylation.

The objective of this study was to establish the effect of the concentration of a starch paste subjected to freezing on the properties of the produced retrograded starch, and to determine its susceptibility to acetylation with acetic acid anhydride. A starch paste (1, 4, 10, 18 or 30g/100g) was produced from native potato starch that was frozen, defrosted and dried. Al preparations of retrograded starch had the same chemical structure determined with the technique of nuclear magnetic resonance (NMR) and diversified physical form visible on photos taken with an electron microscope (SEM). An increase in the concentration of paste, used to produce the preparations, resulted in decreased: amylose content (from 25.0 to 20.4/100g), solubility in water (from 41.1 to 20.1/100g), swelling power (from 45.0 to 19.3/g), and susceptibility of the preparations to the action of amyloglucosidase (from 95.4 to 83.6/100g). The heat of phase transition of solubilisation determined with differential scanning calorimetry (DSC) ranged from 3.8 to 7.1J/g, and the initial temperature of transition was increasing from 43.4 to 49.7°C along with an increasing concentration of the paste subjected to retrogradation. The 1-10/100g concentration of the paste used to produce preparations was observed to increase, whereas that between 10 and 30/100g to decrease the susceptibility to acetylation and viscosity of the prepared pastes, determined both with a Brabender viscograph and a Haake oscillating-rotational viscosimeter.

Effect of the production method on the properties of RS3/RS4 type resistant starch. Part 2. Effect of a degree of substitution on the selected properties of acetylated retrograded starch.

Resistant starch displays health-promoting properties. Starch preparations produced through acetylation of retrograded starch may be applied as a food additive. Apart from prebiotic properties, they may as well model the texture of a food product. The objective of this study was to determine the effect of retrogradation and acetylation conditions on properties of the produced RS3/4 type resistant starch. Native potato starch was used to produce starch pastes (1, 4, 10, 18 or 30g/100g), that were frozen, defrosted and dried. The resultant preparations of retrograded starch were acetylated with various doses of an acetic acid anhydride (3.25, 6.5, 13.0, 26.0 or 52.0ml/100g). The acetylated preparations of retrograded starch were characterised by increasing solubility in water and swelling power as well as a lower amylose content along with an increasing degree of their substitution with residues of acetic acid. Dependencies of: pasting temperatures, viscosity of the prepared pastes, and resistance of acetylated starch to the action of amyloglucosidase on the degree of substitution with acetic acid residues were described with a second degree polynomial function. The extent and range of changes were found to depend on the concentration of paste used to produce a retrograded starch preparation. The maximum resistance of RS3/4 preparations to the action of amyloglucosidase ranged from 28.7 to 45.9g/100g.