N-Benzylethanolammonium Ionic Liquids and Molten Salts in the Synthesis of 68Ga- and Al18F-Labeled Radiopharmaceuticals.

Ionic liquids (ILs), due to their structural features, have unique physical and chemical properties and are environmentally friendly. Every year, the number of studies devoted to the use of ILs in medicine and pharmaceutics is growing. In nuclear medicine, the use of ILs with self-buffering capacity in the synthesis of radiopharmaceuticals is extremely important. This research is devoted to obtaining new ionic buffer agents containing N-benzylethanolammonium (BEA) cations and anions of carboxylic acids. A series of new BEA salts was synthesized and identified by NMR (1H, 13C), IR spectroscopy and elemental and thermal analysis. The crystal structures of BEA hydrogen succinate, hydrogen oxalate and oxalate were determined by x-ray diffraction. Newly synthesized compounds were tested as buffer solutions in 68Ga- and Al18F-radiolabeling reactions with a series of bifunctional chelating agents and clinically relevant peptides used for visualization of malignancies by positron emission tomography. The results obtained confirm the promise of using new buffers in the synthesis of 68Ga- and Al18F-labeled radiopharmaceuticals.

Extraordinary structural complexity of ilmajokite: a multilevel hierarchical framework structure of natural origin.

The crystal structure of ilmajokite, a rare Na-K-Ba-Ce-titanosilicate from the Khibiny mountains, Kola peninsula, Russia, has been solved using single-crystal X-ray diffraction data. The crystal structure is based on a 3D titanosilicate framework consisting of trigonal prismatic titanosilicate (TPTS) clusters centered by Ce3+ in [9]-coordination. Four adjacent TPTS clusters are linked into four-membered rings within the (010) plane and connected via ribbons parallel to 101. The ribbons are organized into layers parallel to (010) and modulated along the a axis with a modulation wavelength of csinß = 32.91 Šand an amplitude of ∼b/2 = 13.89 Å. The layers are linked by additional silicate tetrahedra. Na+, K+, Ba2+ and H2O groups occur in the framework cavities and have different occupancies and coordination environments. The crystal structure of ilmajokite can be separated into eight hierarchical levels: atoms, coordination polyhedra, TPTS clusters, rings, ribbons, layers, the framework and the whole structure. The information-based analysis allows estimation of the complexity of the structure as 8.468 bits per atom and 11990.129 bits per cell. According to this analysis, ilmajokite is the third-most complex mineral known to date after ewingite and morrisonite, and is the most complex mineral framework structure, comparable in complexity to paulingite-(Ca) (11 590.532 bits per cell).

Structural data of phenanthrene-9,10-dicarbonitriles.

In this data article, we present the single-crystal XRD data of phenanthrene-9,10-dicarbonitriles. Detailed structure analysis and photophysical properties were discussed in our previous study, "Intermolecular interactions-photophysical properties relationships in phenanthrene-9,10-dicarbonitrile assemblies" (Afanasenko et al., 2020). The data include the intra- and intermolecular bond lengths and angles.

Allabogdanite, the high-pressure polymorph of (Fe,Ni)2P, a stishovite-grade indicator of impact processes in the Fe-Ni-P system.

Allabogdanite, (Fe,Ni)2P, is the only known natural high-pressure phase reported in the Fe-Ni-P system. The mineral, which was previously described from a single meteorite, the Onello iron, is now discovered in the Santa Catharina and Barbianello nickel-rich ataxites. The occurrence of allabogdanite in Santa Catharina, one of the largest and well-studied meteorites, suggests that this mineral is more common than was believed. The formation of allabogdanite-bearing phosphide assemblages in a given meteorite provides evidence that it experienced peak pressure of at least 8 GPa at a temperature above 800 °C. Since the pressure-temperature stability parameters of allabogdanite fall within the margins of the stishovite (rutile-type SiO2) stability area, the former can be employed as a convenient stishovite-grade indicator of significant impact events experienced by iron and stony-iron meteorites and their parent bodies.

Synthesis of 1-(2-Aminovinyl)indoles and 1,3'-Biindoles by Reaction of 2,2-Diaryl-Substituted 2 H-Azirines with α-Imino Rh(II) Carbenoids.

An effective and operationally simple method for the preparation of 1-(2-(sulfonamido)vinyl)indoles (SAV-indoles) by the Rh(II)-catalyzed reaction of 2,2-diaryl-2 H-azirines with 1-sulfonyl-1,2,3-triazoles has been developed. This method enables the stereoselective synthesis of a variety of 1,2,3-trisubstituted indoles having a Z configuration of the (1-aryl-2-(sulfonamido)vinyl) substituent. The reaction mechanism, supported by DFT calculations, involves the formation of 1,4-diazahexa-1,3,5-trienes, which rapidly cyclize to 2,2-diaryl-1-sulfonyl-1,2-dihydropyrazines. These compounds can be isolated at an early stage of the reaction, but under prolonged heating they isomerize into 7a H-indolium ylides, followed by a barrierless 1,5-prototropic shift to SAV-indoles. The developed methodology was also applied to the preparation of 1,3'-biindoles from 2,2-diaryl-2 H-azirines using 3-diazoindolin-2-imines instead of 1-sulfonyl-1,2,3-triazoles.

High-temperature Fe oxidation coupled with redistribution of framework cations in lobanovite, K2Na(Fe2+4Mg2Na)Ti2(Si4O12)2O2(OH)4 - the first titanosilicate case.

The high-temperature (HT) behaviour of lobanovite, K2Na(Fe2+4Mg2Na)Ti2(Si4O12)2O2(OH)4, was studied using in situ powder X-ray diffraction in the temperature range 25-1000°C and ex situ single-crystal X-ray diffraction of 17 crystals quenched from different temperatures. HT iron oxidation associated with dehydroxylation starts at 450°C, similar to other ferrous-hydroxy-rich heterophyllosilicates such as astrophyllite and bafertisite. A prominent feature of lobanovite HT crystal chemistry is the redistribution of Fe and Mg+Mn cations over the M(2), M(3), M(4) sites of the octahedral (O) layer that accompanies iron oxidation and dehydroxylation. This HT redistribution of cations has not been observed in titanosilicates until now, and seems to be triggered by the need to maintain bond strengths at the apical oxygen atom of the TiO5 pyramid in the heteropolyhedral (H) layer during oxidation-dehydroxylation. Comparison of the HT behaviour of lobanovite with five-coordinated Ti and astrophyllite with six-coordinated Ti shows that the geometry of the Ti polyhedron plays a key role in the HT behaviour of heterophyllosilicates. The thermal expansion, geometrical changes and redistribution of site occupancies which occur in lobanovite under increasing temperature are reported. A brief discussion is given of minerals in which the cation ordering (usually for Fe and Mg) occurs together with iron oxidation-dehydroxylation at elevated temperatures: micas, amphiboles and tourmalines. Now this list is expanded by the inclusion of titanosilicate minerals.

Advanced palladium free approach to the synthesis of substituted alkene oxindoles via aluminum-promoted Knoevenagel reaction.

A synthetic route for the synthesis of C24, as well as for the design of focused libraries of direct AMPK activators was developed based on a convergent strategy. The proposed scheme corresponds to the current trends in C-H bond functionalization. The use of aluminum isopropoxide for the Knoevenagel condensation of oxindole with benzophenones is a noticeable point of this work.

Reactions of CF3-enones with arenes under superelectrophilic activation: a pathway to trans-1,3-diaryl-1-CF3-indanes, new cannabinoid receptor ligands.

4-Aryl-1,1,1-trifluorobut-3-en-2-ones ArCH[double bond, length as m-dash]CHCOCF3 (CF3-enones) react with arenes in excess of Brønsted superacids (TfOH, FSO3H) to give, stereoselectively, trans-1,3-diaryl-1-trifluoromethyl indanes in 35-85% yields. The reaction intermediates, the O-protonated ArCH[double bond, length as m-dash]CHC(OH(+))CF3 and the O,C-diprotonated ArHC(+)CH2C(OH(+))CF3 species, have been studied by means of (1)H, (13)C, (19)F NMR, and DFT calculations. Both types of the cations may participate in the reaction, depending on their electrophilicity and electron-donating properties of the arenes. The formation of CF3-indanes is a result of cascade reaction of protonated CF3-enones to form chemo-, regio- and stereoselectively three new C-C bonds. The obtained trans-1,3-diaryl-1-trifluoromethyl indanes were investigated as potential ligands for cannabinoid receptors CB1 and CB2 types. The most potent compound showed sub-micromolar affinity for both receptor subtypes with a 6-fold selectivity toward the CB2 receptor with no appreciable cytotoxicity toward SHSY5Y cells.

Coupling of platinated triguanides with platinum-activated nitriles as a novel strategy for generation of dimetallic systems.

One of two Pt(IV)-activated propanenitriles in trans-[PtCl4(EtCN)2] is involved in platinum(IV)-mediated nitrile-imine coupling with the platinum(II)-based metallacycles [PtCl2{NH=C(NR2)N(Ph)C(=NH)N(Ph)C(NR2)=NH}] [R2 = Me2 (1a), C5H10 (1b)] yielding diplatinum products, whose structures depend on molar ratios between the reactants. At a 1 : 1 ratio, the mixed-valence platinum(II)/platinum(IV) species [PtCl4{NH=C(NR2)N(Ph)C{=[(N(Et)C=NH)PtCl2(EtCN)]}N(Ph)C(NR2)=NH}] [R2 = Me2 (2a), (CH2)5 (2b)] were generated, whereas at a 1 : 2 ratio the dinuclear platinum(II)/platinum(II) complexes [PtCl2{NH=C(NR2)N(Ph)C{=[(N(Et)C=NH)PtCl2(EtCN)]}N(Ph)C(NR2)=NH}] [R2 = Me2 (3a), (CH2)5 (3b)] were obtained. In contrast to the nitrile-imine coupling observed for the platinum(IV) dinitrile complex, the reaction between the platinum(II) congener trans-[PtCl2(EtCN)2] and any one of 1a,b gives exclusively the substituted dimetallic platinum(II)/platinum(II) products [PtCl2{NH=C(NR2)N(Ph)C{=[(NH)PtCl2(EtCN)]}N(Ph)C(NR2)=NH}] [R2 = Me2 (6a), (CH2)5 (6b)] featuring platinum-containing guanidine 1 as one of the ligands. Complexes 2a,b, 3a,b, and 6a,b were characterized by elemental analyses (C, H, N), HRESI-MS, IR, (1)H NMR spectroscopy, and DTA/TG. The molecular and crystal structure of 2a·2CDCl3 was additionally studied by single-crystal X-ray diffraction. Complexes 2a,b undergo further redox transformation in solutions, and single crystals of [PtCl2{NH=C(NMe2)N(Ph)C{=[(N(Et)C=NH)PtCl2(MeCN)]}N(Ph)C(NMe2)=NH}]·2CH2Cl2 (3'a·2CH2Cl2) were obtained from 2a in a CH2Cl2-MeCN-C2H4Cl2 mixture and studied by X-ray crystallography. The driving forces for the generation of diplatinum products 2 and 3 were elucidated based on a quantum-chemical study.

Cation ordering and superstructures in natural layered double hydroxides.

Layered double hydroxides (LDHs) constitute an important group of materials with many applications ranging from catalysis and absorption to carriers for drug delivery, DNA intercalation and carbon dioxide sequestration. The structures of LDHs are based upon double brucite-like hydroxide layers [M(2+)(n)M(3+)(m)(OH)(2(m+n)](m+), where M(2+) = Mg(2+), Fe(2+), Mn(2+), Zn(2+), etc.; M(3+) = Al(3+), Fe(3+), Cr(3+), Mn(3+), etc. Structural features of LDHs such as cation ordering, charge distribution and polytypism have an immediate influence upon their properties. However, all the structural studies on synthetic LDHs deal with powder samples that prevent elucidation of such fine details of structure architecture as formation of superstructures due to cation ordering. In contrast to synthetic materials, natural LDHs are known to form single crystals accessible to single-crystal X-ray diffraction analysis, which provides a unique possibility to investigate 3D cation ordering in LDHs that results in formation of complex superstructures, where 2D cation order is combined with a specific order of layer stacking (polytypism). Therefore LDH minerals provide an indispensable source of structural information for modeling of structures and processes happening in LDHs at the molecular and nanoscale levels.