Enhanced rheology and firefighting performance of fluorine-free soft foams through the assembly of cellulose nanofibres and cellulose nanocrystals at the air-liquid interface.

In this work, we developed soft and highly stable perfluorocarbon-free foams based on cellulose nanofibres (CNFs), cellulose nanocrystals (CNCs) and alkyl polyglycoside (APG). Neither the CNCs nor the CNFs can effectively stabilise the APG foam, which is reflected in the spontaneous degradation of the foam. Interestingly, blending these two nanocelluloses and foaming resulted in an ultrastable foam. The reflective optical interference technique was used to visualise liquid flow in the liquid film, and the results showed that the foam film with a thickness of only a few tens of nanometres gained excellent mechanical stability by tuning the assembly of CNCs and CNFs at the air-liquid interface. Moreover, the interfibril interactions at the Plateau borders reduce the bubble coarsening rate and drainage rate. In pool fire extinguishing tests, increasing the total concentration of CNCs and CNFs improved the foam stability, but increasing the viscosity led to a decrease in the foam spreading rate. Thus, a formulation with 0.4 % nanocellulose has poorer firefighting performance than a formulation with 0.15 % nanocellulose. When the ratios of CNCs and CNFs are properly controlled, the burnback performance of perfluorocarbon-free foam is better than that of state-of-the-art fluorinated AFFFs for n-heptane pool fires. The sustainability of the firefighting process is considerably improved by switching to the nonperfluorinated liquid foam developed in this work.

CoFe Oxides-Coated 2D Black Phosphorus for Flame-Retardant Nanocoatings with Tunable Mechanical Strength and Efficient Elimination of Toxic Gases.

2D black phosphorus (BP) degrades irreversibly into phosphate compounds under ambient conditions, which limits its application in a variety of fields. In this study, by coating amorphous ferric-cobalt oxides (CoFeO) on BP nanosheets, a multifunctional CoFeO@2D BP is successfully developed that effectively inhibited combustion and catalyzed CO oxidation to eliminate toxic gases. Strong affinity between transition-metal cations and BP allowed the uniform growth of amorphous ferric‒cobalt oxides on the BP surface, which effectively prevented the spontaneous degradation of 2D BP. By combining CoFeO@2D BP with gelatin and kosmotropic salts, the as-obtained nanocoatings are used for surface treatment of flammable polyurethane foam (PU). Kosmotropic ions induced strong hydrophobic interactions and bundling within the gelatin chains which significantly enhanced the mechanical performance of the PU. BP accelerates the carbonization of gelatin to inhibit the combustion of PU, and CoFe oxides, which act as true active centers to accelerate the oxidation of CO, effectively inhibiting the production of harmful gas. The release rate of CO decreases by 73% and the limiting oxygen index (LOI) increases from 17% to ≈32% during PU combustion. The developed novel 2D material opens the way for multifunctional coatings with integrated durability, flame retardancy, and high smoke suppression efficiency.

Comparative Study on Interfacial Properties, Foam Stability, and Firefighting Performance of C6 Fluorocarbon Surfactants with Different Hydrophilic Groups.

Liquid fuel is flammable and hazardous, and a pool fire is one of the most serious disasters. Therefore, it is important to develop high-performance firefighting agents. To synthesize aqueous film-forming foam (AFFF) formulations, two C6 short-chain fluorocarbon surfactants Capstone 1157 (FC1157) and sodium perfluorohexylethyl sulfonate (SF852) with different hydrophilic groups were introduced, and three hydrocarbon surfactants sodium dodecyl sulfate (SDS), decyl glucoside (APG0810), and coco glucoside (APG0814) were chosen. The AFFF formulations based on the short-chain fluorocarbon-hydrocarbon compounding system were developed, and the firefighting performance of the formulations was assessed according to the standard pool fire extinction test. The results indicated that amphoteric FC1157 was slightly more effective than anionic SF852 in extinguishing small-scale pool fires and could reduce heat flux more effectively than SF852. Fluorocarbon surfactant FC1157 has been shown to suppress large pool fires much better than SF852, possibly due to its higher foam stability, higher foaming property, lower dynamic surface tension, and lower bubble coarsening rate. Both formulations we studied were more effective than commercial AFFF formulations. A concentration of 0.1-0.3% of FC1157 in an AFFF solution was optimal for extinguishing high-boiling-point oil fires.

Evaluating measurements of carbon dioxide emissions using a precision source--A natural gas burner.

UNLABELLED: A natural gas burner has been used as a precise and accurate source for generating large quantities of carbon dioxide (CO2) to evaluate emissions measurements at near-industrial scale. Two methods for determining carbon dioxide emissions from stationary sources are considered here: predicting emissions based on fuel consumption measurements-predicted emissions measurements, and direct measurement of emissions quantities in the flue gas-direct emissions measurements. Uncertainty for the predicted emissions measurement was estimated at less than 1%. Uncertainty estimates for the direct emissions measurement of carbon dioxide were on the order of ±4%. The relative difference between the direct emissions measurements and the predicted emissions measurements was within the range of the measurement uncertainty, therefore demonstrating good agreement. The study demonstrates how independent methods are used to validate source emissions measurements, while also demonstrating how a fire research facility can be used as a precision test-bed to evaluate and improve carbon dioxide emissions measurements from stationary sources. IMPLICATIONS: Fossil-fuel-consuming stationary sources such as electric power plants and industrial facilities account for more than half of the CO2 emissions in the United States. Therefore, accurate emissions measurements from these sources are critical for evaluating efforts to reduce greenhouse gas emissions. This study demonstrates how a surrogate for a stationary source, a fire research facility, can be used to evaluate the accuracy of measurements of CO2 emissions.