Physical and physiological soybean seed qualities stored under different environmental conditions and storage bag depths.

The Brazilian Midwest is responsible for 54.3% of the country's soybean production. Adequate storage technologies are essential to maintain physical, physiological, and sanitary seed qualities while also minimizing deterioration processes and consequent germination and vigor declines. In this context, the aim of the present study was to evaluate the physiological potential and physical qualities of soybean seeds stored under different environmental conditions and storage bag depths. Assays were carried out in September 2021 employing Foco 74i77 RSF IPRO cultivar seeds stored from April to August 2021 under three conditions, as follows: chilled at an average temperature of ≤20 °C, at an average temperature of ≤25 °C using a with blanket, and in without blanket warehouse structure at an average temperature of ≥25 °C with no with blanket. A completely randomized 3x3 factorial experimental design was applied, comprising three storage environments and three bag positions (top, middle, and bottom), with three replication each. Physical, physiological, and biochemical tests were performed on the stored seeds. The findings indicate better seed preservation in the chilled environment or when using a with blanket, with significant differences noted for seeds stored the middle of the storage bag. Therefore, soybean seed storage in a chilled environment or using a with blanket aids in slowing down the seed deterioration processes, preserving physiological quality and vigor compared to a conventional storage environment. Additionally, the quality of soybean seeds stored under these conditions in the middle of storage bags is maintained.

Analysis of radiographic images and germination of Campomanesia pubescens (Mart. ex DC.) O.Berg (Myrtaceae Juss.) seeds under drying / Análise de imagens radiográficas e germinação de sementes de Campomanesia pubescens (Mart. ex DC.) O.Berg (Myrtaceae Juss.) sob secagem

Abstract The objective of this study was to evaluate the internal morphology of seeds of Campomanesia pubescens (Mart. ex DC.) O. Berg with varying water content through X-ray image analysis, and correlate the images with the germination of these seeds. Fruits were collected in Jataí, Goiás, Brazil, and taken to the Seed Laboratory of the Federal Institute Goiano, Rio Verde Campus, where they were processed and the seeds were extracted. To establish the predetermined water content (43%, 37%, 34%, 31%, and 28% wet basis), seeds with an initial water content of 43% were kept in an oven with forced air circulation at a temperature of 40 °C until they reached the predetermined water content levels. Next, the seeds were placed in acrylic holders with double-sided tape and transported to the Federal University of Lavras (UFLA), where they were exposed to different intensities of radiation. The X-ray test was conducted with 200 seeds per treatment, and images of the internal structures of the seeds were evaluated. The seeds were returned to the Seed Laboratory of the Federal Institute Goiano, Rio Verde Campus, where the germination test was initiated. The experimental design was completely randomized, in a factorial design (5 × 4), in which there were five water content levels and four seed classes, with four replications. The X-ray test was efficient in the identification of filled, malformed, damaged and empty seeds, which germination rate above 50% in the filled seeds. This visualization of the internal morphology of the seed can be useful to select seeds of better quality, improving the percentage of germination of C. pubescens seeds.

Resumo O objetivo deste trabalho foi avaliar a morfologia interna de sementes de Campomanesia pubescens (Mart. ex DC.) O.Berg com diferentes teores de água por meio de análise de imagens de raios-X, e correlacionar as imagens com a germinação dessas sementes. Os frutos foram coletados no município de Jataí, Goiás, Brasil, e levados ao Laboratório de Sementes do Instituto Federal Goiano, Campus Rio Verde, onde foram processados ​​e as sementes foram extraídas. Para estabelecer o teor de água predeterminado (43%, 37%, 34%, 31% e 28% base úmida), as sementes com um teor inicial de água de 43% foram mantidas em estufa com circulação de ar induzida, a uma temperatura de 40 °C até atingirem os níveis de conteúdo de água predeterminados. Em seguida, as sementes foram colocadas em suportes acrílicos com fita dupla face e transportadas para a Universidade Federal de Lavras (UFLA), onde foram expostas a diferentes intensidades de radiação. O teste de raios-X foi realizado com 200 sementes por tratamento, e imagens das estruturas internas das sementes foram avaliadas. As sementes foram devolvidas ao Laboratório de Sementes do Instituto Federal Goiano, Campus Rio Verde, onde foi iniciado o teste de germinação. O delineamento experimental foi inteiramente casualizado, em esquema fatorial (5 × 4), no qual foram encontrados cinco níveis de umidade e quatro classes de sementes, com quatro repetições. O teste de raios-X foi eficiente na identificação de sementes preenchidas, malformadas, danificadas e vazias, com taxas de germinação acima dos 50% nas sementes cheias. Essa visualização das morfologia interna da semente pode ser útil para selecionar sementes de melhor qualidade, melhorando a porcentagem de germinação das sementes de C. pubescens.

Analysis of radiographic images and germination of Campomanesia pubescens (Mart. ex DC.) O.Berg (Myrtaceae Juss.) seeds under drying.

The objective of this study was to evaluate the internal morphology of seeds of Campomanesia pubescens (Mart. ex DC.) O. Berg with varying water content through X-ray image analysis, and correlate the images with the germination of these seeds. Fruits were collected in Jataí, Goiás, Brazil, and taken to the Seed Laboratory of the Federal Institute Goiano, Rio Verde Campus, where they were processed and the seeds were extracted. To establish the predetermined water content (43%, 37%, 34%, 31%, and 28% wet basis), seeds with an initial water content of 43% were kept in an oven with forced air circulation at a temperature of 40 °C until they reached the predetermined water content levels. Next, the seeds were placed in acrylic holders with double-sided tape and transported to the Federal University of Lavras (UFLA), where they were exposed to different intensities of radiation. The X-ray test was conducted with 200 seeds per treatment, and images of the internal structures of the seeds were evaluated. The seeds were returned to the Seed Laboratory of the Federal Institute Goiano, Rio Verde Campus, where the germination test was initiated. The experimental design was completely randomized, in a factorial design (5 × 4), in which there were five water content levels and four seed classes, with four replications. The X-ray test was efficient in the identification of filled, malformed, damaged and empty seeds, which germination rate above 50% in the filled seeds. This visualization of the internal morphology of the seed can be useful to select seeds of better quality, improving the percentage of germination of C. pubescens seeds.

Implications of the clone by harvest interaction in the selection of sugarcane genotypes in a regionalized program.

The recommendation of sugarcane clones depends on several factors, as the response or performance of the clones over different cuts or harvests. The clone by harvest interaction might be difficult to identify superior clones in the final stages of the sugarcane breeding program. Thus, the objective of this study was to investigate and describe the implications of the genotype by harvest interaction in the adaptability and stability of genotypes and delineation of mega-environments from a set of multi-environment trials. Fifteen clones and four checks were evaluated in eight environments. The trait TPH (tons of pol per hectare) was evaluated in two harvests (plant cane and ratoon cane) in 2010 and 2011. The joint analysis showed significance for harvest (H), environment (E), and genotype (G) effects. The interactions GxE, ExH, GxH, and ExGxH were also significant. The last three-way interaction indicated the differential response of the genotypes over environments, and that it depends on the harvests. The overall mean of the trials was 12.77 TPH. The coefficient of variation was 8.70% and the selective accuracy was 98.63%, indicating high experimental precision. The genotypes G4, G14, and G16 were statistically superior to the check varieties used; however, these genotypes did not show high stability as described by the additive main effects and multiplicative interaction method. There was a specific adaptation between the E7 and E5 environments and the G4 and G5 genotypes, respectively. In general, the grouping of the environments was inconsistent throughout the harvests, except for the E1 and E4 environments, which exhibited similarities for the different genotypes.

Analysis of radiographic images and germination of Campomanesia pubescens (Mart. ex DC.) O.Berg (Myrtaceae Juss.) seeds under drying

Abstract The objective of this study was to evaluate the internal morphology of seeds of Campomanesia pubescens (Mart. ex DC.) O. Berg with varying water content through X-ray image analysis, and correlate the images with the germination of these seeds. Fruits were collected in Jataí, Goiás, Brazil, and taken to the Seed Laboratory of the Federal Institute Goiano, Rio Verde Campus, where they were processed and the seeds were extracted. To establish the predetermined water content (43%, 37%, 34%, 31%, and 28% wet basis), seeds with an initial water content of 43% were kept in an oven with forced air circulation at a temperature of 40 °C until they reached the predetermined water content levels. Next, the seeds were placed in acrylic holders with double-sided tape and transported to the Federal University of Lavras (UFLA), where they were exposed to different intensities of radiation. The X-ray test was conducted with 200 seeds per treatment, and images of the internal structures of the seeds were evaluated. The seeds were returned to the Seed Laboratory of the Federal Institute Goiano, Rio Verde Campus, where the germination test was initiated. The experimental design was completely randomized, in a factorial design (5 × 4), in which there were five water content levels and four seed classes, with four replications. The X-ray test was efficient in the identification of filled, malformed, damaged and empty seeds, which germination rate above 50% in the filled seeds. This visualization of the internal morphology of the seed can be useful to select seeds of better quality, improving the percentage of germination of C. pubescens seeds.

Resumo O objetivo deste trabalho foi avaliar a morfologia interna de sementes de Campomanesia pubescens (Mart. ex DC.) O.Berg com diferentes teores de água por meio de análise de imagens de raios-X, e correlacionar as imagens com a germinação dessas sementes. Os frutos foram coletados no município de Jataí, Goiás, Brasil, e levados ao Laboratório de Sementes do Instituto Federal Goiano, Campus Rio Verde, onde foram processados e as sementes foram extraídas. Para estabelecer o teor de água predeterminado (43%, 37%, 34%, 31% e 28% base úmida), as sementes com um teor inicial de água de 43% foram mantidas em estufa com circulação de ar induzida, a uma temperatura de 40 °C até atingirem os níveis de conteúdo de água predeterminados. Em seguida, as sementes foram colocadas em suportes acrílicos com fita dupla face e transportadas para a Universidade Federal de Lavras (UFLA), onde foram expostas a diferentes intensidades de radiação. O teste de raios-X foi realizado com 200 sementes por tratamento, e imagens das estruturas internas das sementes foram avaliadas. As sementes foram devolvidas ao Laboratório de Sementes do Instituto Federal Goiano, Campus Rio Verde, onde foi iniciado o teste de germinação. O delineamento experimental foi inteiramente casualizado, em esquema fatorial (5 × 4), no qual foram encontrados cinco níveis de umidade e quatro classes de sementes, com quatro repetições. O teste de raios-X foi eficiente na identificação de sementes preenchidas, malformadas, danificadas e vazias, com taxas de germinação acima dos 50% nas sementes cheias. Essa visualização das morfologia interna da semente pode ser útil para selecionar sementes de melhor qualidade, melhorando a porcentagem de germinação das sementes de C. pubescens.