Printability and Thermophysical Properties of Three-Dimensional-Printed Food Based on "Cochayuyo" Durvillaea antarctica Seaweed Flour.

This research assessed the feasibility of adding Cochayuyo seaweed flour (at 30, 50, and 70% levels) to rice flour-based paste to improve its 3D printing quality. The paste's rheological properties, printing quality, texture profile, thermal properties, and color of 3D-printed foods were explored. Results showed that pastes with Cochayuyo addition exhibited shear-thinning behavior, and viscosity increased with increased Cochayuyo concentration. Viscoelastic properties and a Texture Profile Analysis (TPA) revealed that Cochayuyo improved mechanical strength and made the paste easier to flow, improving printed food's extrudability, fidelity, and shape retention, which was better observed in RC50 and RC70 printed at 15 mm s-1. A differential scanning calorimetry (DSC) analysis showed a partial substitution of rice flour for Cochayuyo flour in the formulation. This increased the onset and melting peak temperatures and reduced the enthalpy of fusion. CIE color parameters a*, b*, and L* showed that Cochayuyo addition increased the color to yellow and red; however, lightness was considerably reduced. Therefore, Cochayuyo flour could have the potential to be used for the manufacture improvement of 3D-printed food with better rheological, mechanical, thermal, printing quality, and nutritional properties, making possible the exploitation of the native Cochayuyo seaweed, which is highly available in Chile.

Basil Seeds as a Novel Food, Source of Nutrients and Functional Ingredients with Beneficial Properties: A Review.

Basil (Ocimum basilicum L.) is found worldwide and is used in the food, pharmaceutical, and cosmetic industries; however, the nutritional and functional properties of the seeds are scarcely known. Basil seeds contain high concentrations of proteins (11.4-22.5 g/100 g), with all the essential amino acids except S-containing types and tryptophan; dietary fiber (soluble and insoluble) ranging from 7.11 to 26.2 g/100 g lipids, with linoleic (12-85.6 g/100 g) and linolenic fatty acids (0.3-75 g/100 g) comprising the highest proportions; minerals, such as calcium, potassium, and magnesium, in high amounts; and phenolic compounds, such as orientine, vicentine, and rosmarinic acid. In addition, their consumption is associated with several health benefits, such as the prevention of type-2 diabetes, cardio-protection, antioxidant and antimicrobial effects, and anti-inflammatory, antiulcer, anticoagulant, and anti-depressant properties, among others. The focus of this systematic review was to study the current state of knowledge and explore the enormous potential of basil seeds as a functional food and source of functional ingredients to be incorporated into foods.

Effect of drying methods on drying kinetics, energy features, thermophysical and microstructural properties of Stevia rebaudiana leaves.

BACKGROUND: Stevia leaves were subjected to convective hot-air, infrared and vacuum drying at 40, 60 and 80 °C, followed by an assessment of thermophysical properties and microstructure, along with drying kinetics modelling and evaluation of energy features for all drying operations. RESULTS: Effective moisture diffusivity (Deff ) showed dependency on temperature with values ranging from 1.08 × 10-12 to 7.43 × 10-12  m2  s-1 for convective drying, from 0.71 × 10-12 to 6.60 × 10-12  m2  s-1 for infrared drying, and from 1.29 × 10-12 to 5.39 × 10-12  m2  s-1 for vacuum drying. The thermal properties of the dried Stevia leaves under different drying conditions showed values of density, specific heat, thermal diffusivity, thermal conductivity and thermal effusivity ranging from 95.6 to 116.2 kg m-3 , 3050 to 3900 J kg-1  K-1 , 4.28 × 10-7 to 5.60 × 10-7  m2  s-1 , 0.16 to 0.23 W m-1  K-1 and 244 to 305 W s0.5  m-2  K-1 , respectively. As for microstructure, convective hot-air drying showed better preserved leaf characteristics, compared to infrared- and vacuum-drying, whereby scanning electron microscopy (SEM) image analysis also revealed noticeable differences at higher temperatures. Statistical analysis showed that the Midilli-Kuçuk model fitted best the experimental data of drying curves (0.961 < r2 < 0.999, 0.000064 < SSE < 0.005359, and 0.000074 < χ2 < 0.006278). Comparison of the drying methods with respect to energy features showed that convective drying at 80 °C led to lowest specific energy consumption (61.86 kW h kg-1 ) with highest efficiency (8.5%). CONCLUSION: The results of this study contribute to a better understanding of the drying behaviour and showed that thermophysical properties of dried Stevia leaves and energy features are affected by drying methods. © 2021 Society of Chemical Industry.

Effects of Infrared-Assisted Refractance Window™ Drying on the Drying Kinetics, Microstructure, and Color of Physalis Fruit Purée.

The objective of this work was to study the influence of the drying temperature, infrared (IR) radiation assistance, and the Mylar™ film thickness during Physalis fruit purée drying by the Refractance Window™ (RW™) method. For this, a RW™ dryer layout with a regulated bath at working temperatures of 60, 75, and 90 °C, Mylar™ thicknesses of 0.19, 0.25, 0.30 mm and IR radiation of 250 W for assisting RW™ drying process was used. Experimental curves data were expressed in moisture ratio (MR) in order to obtain moisture effective diffusivities (non-assisted RW™: Deff = 2.7-10.1 × 10-10 m2/s and IR-assisted RW™: Deff = 4.2-13.4 × 10-10 m2/s) and further drying curves modeling (Page, Henderson-Pabis, Modified Henderson-Pabis, Two-Term, and Midilli-Kucuk models). The Midilli-Kucuk model obtained the best-fit quality on experimental curves regarding statistical tests applied (Coefficient of Determination (R2), Chi-Square (χ2) and Root Mean Square Error (RMSE). Microscopical observations were carried out to study the RW™ drying conditions effect on microstructural changes of Physalis fruit purée. The main findings of this work indicated that the use of IR-assisted RW™ drying effectively accelerates the drying process, which achieved a decrease drying time around 60%. Thus, this combined RW™ process is strongly influenced by the working temperature and IR-power applied, and slightly by Mylar™ thickness.

Nutritional and organoleptic properties of murta (Ugni molinae Turcz) berries impregnated with Lactobacillus casei var. rhamnosus and dehydrated by different methods.

This work evaluated nutritional and organoleptic properties of murta, a Chilean native berry, impregnated with Lactobacillus casei var. rhamnosus and dehydrated by different methods: freeze- (FD), convective- (CD) and vacuum- (VD) drying. Scanning electron microscopy revealed that L. casei localized at the peduncle and near the peduncle of the impregnated fruit. Murta enriched with probiotics contained higher L. casei viable counts after dehydration with FD compared to CD and VD methods. Overall, drying resulted in a decrease in crude fibre and phenolic compounds, which was attributed to L. casei metabolic activity suggesting that murta berries could act as prebiotics for L. casei. Among drying methods, L. casei enriched FD murta presented less alterations in the microstructure, less drying-induced damage and obtained a higher sensory acceptability score than CD and VD murta. Taken together, these results will contribute to the development of functional foods from regional products improving local economy.

Drying kinetics of probiotic-impregnated murta (Ugni molinae T.) berries.

The aim of this study was to evaluate dehydrated murta berries enriched with probiotic (Lactobacillus casei var. rhamnosus) bacteria. L. casei was incorporated to fresh murta by vacuum impregnation at alternative conditions (pressure 50, 150 and 300 mbar; time 5, 10 and 15 min; temperature 20 ± 0.2 °C) and impregnated murta samples were dehydrated by two drying methods at 40 °C, vacuum and convective drying. Both drying processes were modeled by three mathematical models (Weibull, Page and modified Page). According to the statistical tests applied, the Weilbull model obtained the best-fit quality on experimental data. Effective moisture diffusivity varied between 1.23-1.75 × 10-10 m2/s and 1.16-1.44 × 10-10 m2/s for vacuum and convective drying, respectively. After impregnation, murta berries contained approximately 107 CFU/g L. casei although maximum counts were found at 150 mbar for 15 min. Drying decreased L. casei viability in 1.5-1.9 log and 0.5-1.2 log for vacuum and convective drying, respectively. Thus, impregnation at 150 mbar for 15 min followed by convective drying at 40 °C appears as the method of choice to produce probiotic enriched murta berries that can be commercialized as probiotic dried snacks.

Effect of high hydrostatic pressure on rheological and thermophysical properties of murtilla (Ugni molinae Turcz) berries.

Effects of high hydrostatic pressure (HHP) on rheological and thermophysical properties of murtilla berries were evaluated after pressure treatments for 5 min between 100 and 500 MPa. Differential scanning calorimetry was employed to measure specific heat capacity. HHP caused a significant decrease in specific heat and density, while thermal diffusivity did not changed significantly. Thermal conductivity showed a slight increase upon HHP treatment. Apparent viscosity increased significantly above 200 MPa HHP treatment. Apparent viscosity of treated samples between 200 and 400 MPa did not differ significantly and the increase was significant at 500 MPa. Herschel-Bulkley, Bingham and Ostwald de Waele models were used to describe the rheological behaviour of murtilla purée, and Ostwald de Waele model gave the best fit for the experimental data.

Influence of drying temperature on dietary fibre, rehydration properties, texture and microstructure of Cape gooseberry (Physalis peruviana L.).

The effects of air drying temperature on dietary fibre, texture and microstructure of the Cape gooseberry fruits during convective dehydration in the range of 50-90 ºC were investigated. The ratio of insoluble dietary fibre to soluble dietary fibre was higher than 7:1 for all dehydrated samples. At 50 ºC tissue structure damage was evidenced leading to the maximum water holding capacity (47.4 ± 2.8 g retained water/100 g water) and the lowest rehydration ratio (1.15 ± 0.06 g absorbed water/g d.m.). Texture analysis showed effects of drying temperatures on TPA parameters. Changes in microstructure tissue were also observed at the studied drying temperatures. Hot air drying technology leads not only to fruit preservation but also increases and adds value to Cape gooseberry, an asset to develop new functional products.

Influence of air-drying temperature on drying kinetics, colour, firmness and biochemical characteristics of Atlantic salmon (Salmo salar L.) fillets.

In this work the drying kinetics of Atlantic salmon (Salmo salar L.) fillets and the influence of air drying temperature on colour, firmness and biochemical characteristics were studied. Experiments were conducted at 40, 50 and 60°C. Effective moisture diffusivity increased with temperature from 1.08×10(-10) to 1.90×10(-10) m(2) s(-1). The colour difference, determined as ΔE values (from 9.3 to 19.3), as well as firmness (from 25 to 75 N mm(-1)) of dried samples increased with dehydration temperature. The lightness value L(∗) and yellowness value b(∗) indicated formation of browning products at higher drying temperatures, while redness value a(∗) showed dependence on astaxanthin value. Compared with fresh fish samples, palmitic acid and tocopherol content decreased in a 20% and 40%, respectively, with temperature. While eicosapentaenoic acid (EPA) content remained unchanged and docosahexaenoic acid (DHA) content changed slightly. Anisidine and thiobarbituric acid values indicated the formation of secondary lipid oxidation products, which is more relevant for longer drying time than for higher drying temperatures.

Stevia rebaudiana Bertoni, source of a high-potency natural sweetener: A comprehensive review on the biochemical, nutritional and functional aspects.

Stevia rebaudiana Bertoni, an ancient perennial shrub of South America, produces diterpene glycosides that are low calorie sweeteners, about 300 times sweeter than saccharose. Stevia extracts, besides having therapeutic properties, contain a high level of sweetening compounds, known as steviol glycosides, which are thought to possess antioxidant, antimicrobial and antifungal activity. Stevioside and rebaudioside A are the main sweetening compounds of interest. They are thermostable even at temperatures of up to 200°C, making them suitable for use in cooked foods. S. rebaudiana has a great potential as a new agricultural crop since consumer demand for herbal foods is increasing and proximate analysis has shown that Stevia also contains folic acid, vitamin C and all of the indispensable amino acids with the exception of tryptophan. Stevia cultivation and production would further help those who have to restrict carbohydrate intake in their diet; to enjoy the sweet taste with minimal calories.